repeater and are using an excuse to give their
friend a freq pair.
Dave Schmidt
N9NLU
( yes, I'm not afraid to shout the truth and sign my name - not like others
who hide behind excuses and lack of communications... heck, ignores
communications - like the Wisconsin Assocation of Repeaters
their
doughnuts. In this case, since the last meeting was in SE WI, the next one
will probably will be 300 miles away in NW Wisconsin. They never hold it in
one spot.
Regards
Dave Schmidt
N9NLU
On 1/19/07, mch [EMAIL PROTECTED] wrote:
Did you send your reply back certified? After their claim
I have to agree with Dave. Using the proper charger or power supply for
keeping the batts up. I have my batteries housed in a stainless steel
enclosure that is anchored into concrete outside my ham shack. I learned the
hard way about using the proper charger... I just tapped into my repeaters
Question about this order is it effective imidiately that the code is
no longer required for new licencing and the licenced techs (w/o code) are
now equal to tech + (with code) ? OR is there an effective on
after date?
]*On Behalf Of *Dave Schmidt
*Sent:* Friday, December 15, 2006 9:56 PM
*To:* Repeater-Builder@yahoogroups.com
*Subject:* Re: [Repeater-Builder] FYI: FCC officially issues RO dropping
code requirement today
Question about this order is it effective imidiately that the code
is no longer
ordered the general study guide.
Richard, N7TGB
-Original Message-
*From:* Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]
ups.com]*On Behalf Of *Dave Schmidt
*Sent:* Friday, December 15, 2006 10:25 PM
*To:* Repeater-Builder@yahoogroups.com
*Subject:* Re: [Repeater-Builder
In the wav file is that white noise or data bursts before and after the
dtmf?
Dave / N9NLU
On 12/12/06, Jaime [EMAIL PROTECTED] wrote:
Sounds like a digital signal. Could it be one of those new d-star rigs
that some one has activated the autodial feature on the dtmf pad too? The
Hummm, I ran across that issue myself. But that was with an absolutely fresh
install of XP and nothing else. I had to install Java and then the buttons
came up active. ActiveX is used for the streaming tower camera video
on the site. So makesure you have your java installed and enabled.
Dave
If you still have the controller, I'll take it. Where and how do I pay?
Dave Schmidt
N9NLU
--- Jeff [EMAIL PROTECTED] wrote:
The Vertex UHF VXR-5000 repeater I got for my latest project came
with
a Pacific Research RI-210 repeater controller in it (Not hooked up
just sitting in it). I
have a question though, I've always seen UHF R100 repeaters, Was
there ever a VHF version? If so, I would love to get my hands on one of
them.
Dave Schmidt
N9NLU
Kewaskum, WI
--- texaswpd103 [EMAIL PROTECTED] wrote:
Thanks for the info. When I called the radio shop at the City I work
Similar problem here with my Best ME850VA. Had it on my repeater for
the linking computer till a lightning strike - not necessarily a direct
hit, it aprears to have hit a power pole about 150 feet away from the
tower. Even so, I did have lots of electronics smoke, fry and other
wise go nutz as
The weather forecast should have been your first clue. Even though it
doesn't say exactly where it is... it have a picture of the Sears Tower
the station is in Chicago!
Secondly, to answer the first persons issue about triangulation... that
is what they were doing by driving around. They
One thing I noticed Hamvention was a week earlier this year than
last. Now watch, weather will be just absolutely beautiful this up
comming weekend - when it usually would have been.
--- Bob Dengler [EMAIL PROTECTED] wrote:
At 5/18/2004 11:10 AM, you wrote:
Those of us from the west
the time.
Dave Schmidt / N9NLU
Kewaskum, WI
--- JOHN MACKEY [EMAIL PROTECTED] wrote:
Sure, Echostation can do it. But then you have to dedicate a
computer to run
a repeater. That is certainly NOT a quick and cheap repeater
solution.
Also, a rigblaster is an expensive solution when you can
Hu, that might be interesting - contact me at cworksmidwest (AT)
yahoo (DOTTT) co with your price. Might be an interesting 6M
duplexer project ;-)
Dave
N9NLU
--- NØATH [EMAIL PROTECTED] wrote:
I've got 6 pcs 6 foot long of 3 1/2 inch if that would help
Dave / NØATH
- Original
lightly and the other was a spair and never used. Both
are in very nice physical condition.
Trade items...
I'm looking for a VHF duplexer that can handle 100W @ .600 split
I accept Paypal and I accept US Postal Money Orders.
Thanks
Dave Schmidt
N9NLU
Kewaskum, WI
Yahoo
Is there a difference in the series 1000 EFJ repeater to the CR-1000
EFJ repeater?
I have a Series 1000 UHF manual - missing the cover, but its in
readable condition.
Dave
N9NLU
--- Derek B. McIntyre [EMAIL PROTECTED] wrote:
Need an RF Johnson CR-1000 repeater manual. Especially need tune-up
I didn't buy it off the guy on e-bay though ... I have one of the 40ft
Rohn telescoping masts. Heavy in weight, great galvinizing, very easy
to setup and it can hold up quite a bit especually if used with a drive
on base and some guy wires ( the guy wires are a necesity if going over
25 - 30 feet
I know a pile of people are looking for one of these units ... the real
thing or even a clone.
FOR SALE!
A REAL EFJ RPI!!! which is kinda rare and hard to find... especially
this one, the 023-5810-000 that is capable of programming repeaters
such as the Johnson 3450 which the programming jack
Why not get a Kenwood TK-880 ( I think ) --- a kenwood mobile radio
that is fleetsync capable. You can then use another fleetsync moble or
portable to sent a specific fleetsync code to turn off the repeater and
another fleetsync code to turn it back on. The radio at the repeater
site would
But what is the price no mention of that crutial piece of
information.
--- milguy111 [EMAIL PROTECTED] wrote:
FYI - i am NOT interested in offers for the individual
components of the 6m repeater system. The equipment is sold as a
compete set.
Your use of Yahoo!
21 matches
Mail list logo
