Subject: [Repeater-Builder] Digest Number 7381
1b. Re: AGM Batteries
Posted by: Brian Marburger wqgp...@yahoo.com wqgp673
Sun Aug 8, 2010 9:24 am (PDT)
those batteries agm are used on power chairs too. they do not vent
--- On Sun, 8/8/10, Tim and Janet kb2...@gmail.com
I am very interested in this project. All information you may have would be
greatly appreciated. A DB224A removed from service is a lot easier to come up
with than one for 220.
Tim KB2MFS
N4CKV repeater
Add me to the list too!!
Tim KB2MFS
Who is this other guy that repairs TE equipment?
We have been running a TE amp on our 220 machine for a few years now. There
are not a lot of users of 220 in our area so it isn't keyed up like the VHF or
UHF machines here. We did need to send the amp back to TE for a repair that
most likely
I replied direct to you. If something happens to the current buyer please let
me know and a check or money order will be on its way to you.
Every once in a while a 220 dipole array becomes available. Anybody else
happen to have one to get rid of?
Tim
KB2MFS
This wasn't my post but I do have some thoughts on the subject.
I do partially understand the problems of both sides. Yes the equipment is
owned by someone and no one else has the right to demand use of it. However I
would also say comparing a repeater to your home station is a bad choice.
Of Tim and Janet
Sent: Monday, June 01, 2009 11:19 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re:Looking for 220 Repeater Antenna
We are currently using a G7-220 on our repeater. We did have problems with
the first one we put in the air. The current one
Repeater BuilderWe are currently using a G7-220 on our repeater. We did have
problems with the first one we put in the air. The current one is also
supported near the top with a standoff to help stabilize it. We too have been
in search of a better antenna for this band. The DB224-JJ is
Repeater BuilderLooking for a cheap (working) control head, speaker, mic and
wire harness for a Mastr II mobile. I was hoping to have an easy way to test
mobiles on the bench. Anyone have one working to part with?
Thanks
Tim KB2MFS
I am in the same situation with a TKR-820.
Who on the list is willing to program the chips? Cost?
Tim
Re: info on Kenwood TKR-720
Posted by: Mike Morris WA6ILQ [EMAIL PROTECTED] web_magician
Mon Nov 24, 2008 1:46 pm (PST)
At 11:11 AM 11/24/08, you wrote:
Hi all,
Can anyone provide some
Repeater BuilderThis is a side mounted installation on a tower, Rohn 25. The
first G7-220 antenna was damaged in the wind. The current one seems to get
noisy at times and we suspect the antenna as the culprit. When we installed
this one we also used a standoff to help stabilize the top of
I would like to solicit antenna recommendations for a 220 Mhz repeater. We are
currently using the Hustler G7-220 and are shopping for a replacement. I did
get a quote for a Comprod 4 dipole unit. Very pricey though.
I know that everyone has their favorites and I don't want to start a ford
I am looking for some mentoring help in utilizing an 8924C comm monitor. If
you have experience with this unit and would be willing to assist me please
contact me direct.
kb2mfs at gmail dot com
Thanks
Tim
These are the same duplexers that we are using. I have the orignal
documentation. I can scan and email them to you.
Mike or Kevin,
Would you like a copy as well so they can be included on the site?
Tim
Are you talking about me again Scott? ;)
By the way the 220 repeater is doing well. Still waiting to get the remote
site in operation.
Tim KB2MFS
N4CKV/R
I am not in KY but just south in TN. When we attempted to contact our
representative for some time we finally just gave up and moved on. After some
period of time (months) an email was returned. We have once again attempted to
contact him and still no reply. My limited experience with SERA
Please believe and listen to these warnings.
Several years ago I decided to go back to the gym and get back into shape. I
went to the doctor for a physical which included a blood test. As part of the
test they look at two liver enzymes. One of mine was high just outside the
normal range.
Always wear gloves and have lots of ventilation when working with MEK. Amazing
stuff but very nasty.
Tim KB2MFS
Re: Scotchkoat
Posted by: Daron J. Wilson [EMAIL PROTECTED] daronwilson
Mon Jan 7, 2008 7:39 pm (PST)
Any one know of any solvents that can be used to remove it?? I have some on
I saw a past post about the HP8924C service monitor/CDMA test set. What are
your thoughts about this unit? I would like to have my own service monitor but
can't justify the high cost of the other portable units. I have seen some of
these HP8924C units at a more reasonable price. My plans
Repeater BuilderWhat is the standard spacing for a VHF antenna side mounted on
rohn 25 tower? I found a page on repeater builder that showed 1/4-1/2
wavelength with a null behind the tower. I don't want to mount it any further
than 4' from the tower but of course I would like to minimize the
Thanks for all the information. I will start looking for equipment and give it
a try.
Tim
1a.
Re: Need Help... where can I buy a DSL-Internet repeater...?
Posted by: Kevin Custer [EMAIL PROTECTED] repeaterbuilder
Fri Jan 5, 2007 6:15 am (PST)
kb2mfs wrote:
No I haven't tried it yet. I
Kevin, can you go into a little more detail on your system? I am in the same
situation and a friend that has both DSL and Cable available has agreed to let
me install a system between his and my house. The path is 7.2 km and is not
line of sight. I have a slight hill between us. If he just
Where is the best place to get 7/8 heliax connectors reasonably priced. I
am looking for N female type.
Tim
- Original Message -
From: Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 13, 2006 10:41 PM
Subject: [Repeater-Builder] Digest
Recently there were some negative comments about the LMR coax. I have not
used it before but was curious what problems others may have encountered
while using it.
Tim KB2MFS
Yahoo! Groups Links
* To visit your group on the web, go to:
24 matches
Mail list logo