Re: [Repeater-Builder] Andrews hard line help

2009-03-17 Thread Nate Duehr
On Mar 16, 2009, at 9:53 PM, Rick Szajkowski wrote: Thanks Nate .. :P yes I looked inside .. there was water damage to the box's when I got the ends with the coax .. I will double check to see if I have any luck Ah, bummer. Well, send on over the actual connector numbers as Jeff

[Repeater-Builder] Andrews hard line help

2009-03-16 Thread Rick Szajkowski
Hello to the group ... I need to run some new 7/8 hard line and some 1/2 inch Question is there any info on installing the ends on both I did a google search and not luck any help would be great and also any special tools ? Thanks in advance .. Rick

Re: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Chuck Kelsey
Subject: [Repeater-Builder] Andrews hard line help Hello to the group ... I need to run some new 7/8 hard line and some 1/2 inch Question is there any info on installing the ends on both I did a google search and not luck any help would be great and also any special tools ? Thanks

Re: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Rick Szajkowski
be all set when you get them. No special tools required. Chuck WB2EDV - Original Message - *From:* Rick Szajkowski va3r...@gmail.com *To:* Repeater-Builder@yahoogroups.com *Sent:* Monday, March 16, 2009 3:11 PM *Subject:* [Repeater-Builder] Andrews hard line help Hello to the group

RE: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Nate Duehr
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Rick Szajkowski Sent: Monday, March 16, 2009 1:25 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Andrews hard line help no new ends :( all NOS) but no distructions ... so any and all help . I will go look at the ends

Re: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Chuck Kelsey
] Andrews hard line help no new ends :( all NOS) but no distructions ... so any and all help . I will go look at the ends and see if I can read part #'s On Mon, Mar 16, 2009 at 3:14 PM, Chuck Kelsey wb2...@roadrunner.com wrote: There is an instruction sheet that comes with the new

Re: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Chuck Kelsey
: [Repeater-Builder] Andrews hard line help no new ends :( all NOS) but no distructions ... so any and all help . I will go look at the ends and see if I can read part #'s On Mon, Mar 16, 2009 at 3:14 PM, Chuck Kelsey wb2...@roadrunner.com wrote: There is an instruction sheet

Re: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread n4tua
Rick, I have a pdf of installation instructions for the ring flare type connector. Let me know if you need. Collin -Original Message- From: Rick Szajkowski va3r...@gmail.com To: Repeater-Builder@yahoogroups.com Sent: Mon, 16 Mar 2009 3:11 pm Subject: [Repeater-Builder] Andrews hard line

RE: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Jeff DePolo
Hello to the group ... I need to run some new 7/8 hard line and some 1/2 inch Question is there any info on installing the ends on both I did a google search and not luck any help would be great and also any special tools ? It's easier if you have Andrew's tools (or whoever's), but

Re: [Repeater-Builder] Andrews hard line help

2009-03-16 Thread Rick Szajkowski
Szajkowski *Sent:* Monday, March 16, 2009 1:25 PM *To:* Repeater-Builder@yahoogroups.com *Subject:* Re: [Repeater-Builder] Andrews hard line help no new ends :( all NOS) but no distructions ... so any and all help . I will go look at the ends and see if I can read part #'s On Mon, Mar