Hello All,
Has any one used the Decibel
Products model DB-228?
I was thinkingof replacing
my DB-224 on two meters
in Ocean City NJ with one.
I got a flyer two day in the mail
and it shows 9 DBd omni or 12 DBd
offset on two meters. WOW!
Sincerely,Russ Stafford, W3CH
Yahoo!
russ wrote:
Hello All,
Has any one used the Decibel
Products model DB-228?
I was thinkingof replacing
my DB-224 on two meters
in Ocean City NJ with one.
I got a flyer two day in the mail
and it shows 9 DBd omni or 12 DBd
offset on two meters. WOW!
Hi Russ,
@yahoogroups.comSubject: Re:
[Repeater-Builder] Has any one used the DB-228?russ
wrote:
Hello All,
Has any one used the Decibel
Products model DB-228?
I was thinkingof replacing
my DB-224 on two meters
in Ocean City NJ with one.
I got a flyer two day in the mail
Hi Russ:
I have been using a DB-228 for over three years on
147.72/147.81.
I agree with everyones comments, i.e. it is a very formidable
antenna.
It is worth the extra money and you will be
satisfied.
The DB-228 is actually two DB 224 with an additional phasing
harness. Therefore
The RCC I worked for used two DB228's co-phased on our 500 foot tower at
480 feet for the VHF master recieve,handheld coverage to 32 miles! Had
my 2 meter recieve on it until the end,unbelieveable! Just above that
were two DB420's co-phased for the UHF master receive,also awesome! Both
were
Hello All,
The DB-228 is aluminum. Open dipole
8 of them going up the mast. They are
a monster of an antenna. It is about 41'
tall at 147 MHz. It is made to go up a tower
leg. Like I said a real monster but lot-O-gain.
Yes they are 9 DBd or 12 DBd on two
meters!
One of the highest gain
Request for guidance on a DB228I have a DB228
antenna designed for 2 meters. Needed is the proper mounting hardware/
mounting instructionsand some technical info on it. A minor problem
exists where the coax connects to the dipole elements set screws being rusty and
about half require
Hi Gary and the list,
I mite be able to help with your
install we have done 4 of them and
from the sounds of thing looks like
we mite be doing number 5 .
If you would like to call me at work
between 08:00 and 17:00 eastern
I would be glad to chat with you on
how you can installed it. Some
Dean,
Thank you for the offer of installation help.
I will give you a call tomorrow morning.
Gary K2UQ
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
9 matches
Mail list logo