Ralph Hogan wrote:
Along these lines, someone on the list mentioned using coax multi-dropped
(coax tee) off to each receiver for a voter application. Can't find the
original posting. I was curious about the lengths required between the
antenna and then to each radio?
Being that I work in the
On Sun, 18 Dec 2005, Ralph Hogan wrote:
Along these lines, someone on the list mentioned using coax
multi-dropped (coax tee) off to each receiver for a voter application.
Can't find the original posting. I was curious about the lengths
required between the antenna and then to each radio?
I would like to install one antenna for four link receivers.How
complicated is this? What do I need to do this?
Thanks in advance
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL
of splits so
that the loss in the splitter is overcome.
73, Eric Lemmon WB6FLY
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Vincent
CarusoSent: Sunday, December 18, 2005 1:04 PMTo:
Repeater-Builder@yahoogroups.comSubject: [Repeater-Builder] Multiple
receivers one
CarusoSent: Sunday, December 18, 2005 1:04 PMTo: Repeater-Builder@yahoogroups.comSubject: [Repeater-Builder] Multiple receivers one antenna ??? I would like to install one antenna for four link receivers.How complicated is this? What do I need to do this?Thanks in advance YAHOO! GROUPS LINKS
, December 18, 2005 1:04 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Multiple receivers one
antenna ???
I would like to install one antenna for four link
receivers. How
complicated is this? What do I need to do this?
Thanks in advance
Thanks for all the great info!
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
PROTECTED] On Behalf
Of Vincent Caruso
Sent: Sunday, December 18, 2005 1:04 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Multiple receivers one
antenna ???
I would like to install one antenna for four link
receivers. How
complicated is this? What do I need to do
, Eric Lemmon WB6FLY
-
From: Repeater-Builder@yahoogroups.com
[mailto:Repeater-Builder@yahoogroups.com] On Behalf
Of Vincent Caruso
Sent: Sunday, December 18, 2005 1:04 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Multiple receivers one
antenna
I've posted this a few times...
**IF** loss on the incoming signal(s) isn't an issue ...
1/2-wave (or multiple thereof) jumpers, daisy-chained
between Ts.
[rx.ant-coax] -- [T-(rx)] -jumper- [T-(rx)] -jumper- [last
rx]
Our RXs did not exhibit problematic interactions -- used
RG58 PL259s.
Our
10 matches
Mail list logo