: RE: [Repeater-Builder] Re: Has anyone interfaced a Yaesu
FT-8500 to be a remote base on a repeater?
Alinco almost got it right, at least with the DR599 and possibly the
DR600. The radio can be remote controlled if it has the DTMF decoder
option board via RF. I think you can also remote
At 09:18 AM 11/16/2006, you wrote:
Send me a
schematic of both the FT-8500 and the TM-742A and indicate what
repeater controller you desire to interface too.
---I'm not sure about the 742A but the Yaesu line of mobile radios
do NOT lend themselves to remote base use *IF* you want them to be
I would say that depends on when the radio was made. Older Yaesu's,
such as the FT-757 and even the FT-727 had a CAT interface which
allows data from a computer to set the operating parameters of the
radio.
Other radios in the Yaseu line, Such as the FT-5100 have a few lines
for the buttons, like
At 11:18 AM 11/16/2006, you wrote:
I would say that depends on when the radio was made. Older Yaesu's,
such as the FT-757 and even the FT-727 had a CAT interface which
allows data from a computer to set the operating parameters of the
radio.
Other radios in the Yaseu line, Such as the FT-5100
It should be possible to emulate the hand mic and control the radio.
You would need some serious test equipment and it may not be worth the
effort though. It should also be possible to piggy back a circuit into
either the mic or the radio front pannel as well if disecting the
protocol is not an
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of DCFluX
Sent: Thursday, November 16, 2006 1:18 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Has anyone interfaced
] On Behalf Of DCFluX
Sent: Thursday, November 16, 2006 1:18 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Has anyone interfaced a Yaesu FT-8500 to
be a remote base on a repeater?
* I would say that depends on when the radio
was made
At 11/16/2006 12:46 PM, you wrote:
At 11:18 AM 11/16/2006, you wrote:
I would say that depends on when the radio was made. Older Yaesu's,
such as the FT-757 and even the FT-727 had a CAT interface which
allows data from a computer to set the operating parameters of the
radio.
Other radios
At 02:10 PM 11/16/2006, you wrote:
Are you sure about the FT-8500? I was sure I saw a reference to the CAT
interface in the 8500 manual.
---I stand corrected. Indeed you're correct about the 8500. I stand
by my comments about the 8800 and 8900 however :-)
Ken
All I could find on the 8500 is a manual in russian.
But I would be glad to get the information on the truth table for
future reference.
On 11/16/06, Bob Dengler [EMAIL PROTECTED] wrote:
At 11/16/2006 12:46 PM, you wrote:
At 11:18 AM 11/16/2006, you wrote:
I would say that depends on when
At 11/16/2006 15:12, you wrote:
All I could find on the 8500 is a manual in russian.
But I would be glad to get the information on the truth table for
future reference.
Page 55 of the FT-8500 user manual:
The PCC (Personal Computer control) System in the FT-8500 provides control
of frequency,
11 matches
Mail list logo
