Re: Configured repository doesn't show on New Review Request page
Hi! It is a valuable piece of information, still, I have questions remained. 'cleartool lsview' with -cview flag presupposes that there is a view already set (-cview means current view). Do I need to provide the command which sets the view in the path field of the repo, or the application is already needed to be ran on the server with the view set? Thanks, Géza 2012/12/7 Christian Hammond chip...@chipx86.com: Hi, I'm not an expert on the Clear Case setups, but going through the code, we do this: cleartool lsview -full -properties -cview If we get an error, we won't show the repository. We then look through the output. If there's no Properties: with dynamic or snapshot, we fail. Otherwise, it should list the repository. Hope that in some way helps. Our Clear Case support is not really a first-class citizen. It's a series of contributions, but unfortunately not one I know a lot about. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 7:36 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I checked and it really seems that path will be problem? Could you help me in providing correct path format? Do I only need /vobs/..., or I need a view name on top of it, or any other variation? I'm a bit confused, as your documentation mentions views somewhere, but your on-page hint states absolute path, which, from server point of view, would be /vobs/... Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Sorry, yes, cleartool. (It's a bit late here.) If cleartool is there, then yeah, it's probably a repository path problem. I'd see if there's any error information in the reviewboard.log file that indicates what may be going wrong. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 2:43 AM, Géza Kulcsár gesap...@gmail.com wrote: Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to
Re: Configured repository doesn't show on New Review Request page
Hi Géza, Sorry, I missed a crucial piece of information. That command is run from the directory specified by the Repository Path. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Mon, Dec 10, 2012 at 1:01 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! It is a valuable piece of information, still, I have questions remained. 'cleartool lsview' with -cview flag presupposes that there is a view already set (-cview means current view). Do I need to provide the command which sets the view in the path field of the repo, or the application is already needed to be ran on the server with the view set? Thanks, Géza 2012/12/7 Christian Hammond chip...@chipx86.com: Hi, I'm not an expert on the Clear Case setups, but going through the code, we do this: cleartool lsview -full -properties -cview If we get an error, we won't show the repository. We then look through the output. If there's no Properties: with dynamic or snapshot, we fail. Otherwise, it should list the repository. Hope that in some way helps. Our Clear Case support is not really a first-class citizen. It's a series of contributions, but unfortunately not one I know a lot about. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 7:36 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I checked and it really seems that path will be problem? Could you help me in providing correct path format? Do I only need /vobs/..., or I need a view name on top of it, or any other variation? I'm a bit confused, as your documentation mentions views somewhere, but your on-page hint states absolute path, which, from server point of view, would be /vobs/... Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Sorry, yes, cleartool. (It's a bit late here.) If cleartool is there, then yeah, it's probably a repository path problem. I'd see if there's any error information in the reviewboard.log file that indicates what may be going wrong. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 2:43 AM, Géza Kulcsár gesap...@gmail.com wrote: Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/
Re: Configured repository doesn't show on New Review Request page
Hi! When command is issued from console in the desired vob directory, it gives correct output and even dynamic tag is found among Properties. But giving the same directory path as Repository Path, it still doesn't show. Do you know of any tricky options maybe of starting your application itself? It can be the last remaining root cause, as the command in itself works and the directory exists and reachable. In one of your earlier mails, you mentioned some reviewboard log. Could you please provide a path to it maybe so that I can request it more exactly from the server technician? Thanks, Géza 2012/12/10 Christian Hammond chip...@chipx86.com: Hi Géza, Sorry, I missed a crucial piece of information. That command is run from the directory specified by the Repository Path. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Mon, Dec 10, 2012 at 1:01 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! It is a valuable piece of information, still, I have questions remained. 'cleartool lsview' with -cview flag presupposes that there is a view already set (-cview means current view). Do I need to provide the command which sets the view in the path field of the repo, or the application is already needed to be ran on the server with the view set? Thanks, Géza 2012/12/7 Christian Hammond chip...@chipx86.com: Hi, I'm not an expert on the Clear Case setups, but going through the code, we do this: cleartool lsview -full -properties -cview If we get an error, we won't show the repository. We then look through the output. If there's no Properties: with dynamic or snapshot, we fail. Otherwise, it should list the repository. Hope that in some way helps. Our Clear Case support is not really a first-class citizen. It's a series of contributions, but unfortunately not one I know a lot about. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 7:36 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I checked and it really seems that path will be problem? Could you help me in providing correct path format? Do I only need /vobs/..., or I need a view name on top of it, or any other variation? I'm a bit confused, as your documentation mentions views somewhere, but your on-page hint states absolute path, which, from server point of view, would be /vobs/... Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Sorry, yes, cleartool. (It's a bit late here.) If cleartool is there, then yeah, it's probably a repository path problem. I'd see if there's any error information in the reviewboard.log file that indicates what may be going wrong. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 2:43 AM, Géza Kulcsár gesap...@gmail.com wrote: Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group
Re: Configured repository doesn't show on New Review Request page
Hi, I'm not an expert on the Clear Case setups, but going through the code, we do this: cleartool lsview -full -properties -cview If we get an error, we won't show the repository. We then look through the output. If there's no Properties: with dynamic or snapshot, we fail. Otherwise, it should list the repository. Hope that in some way helps. Our Clear Case support is not really a first-class citizen. It's a series of contributions, but unfortunately not one I know a lot about. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 7:36 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I checked and it really seems that path will be problem? Could you help me in providing correct path format? Do I only need /vobs/..., or I need a view name on top of it, or any other variation? I'm a bit confused, as your documentation mentions views somewhere, but your on-page hint states absolute path, which, from server point of view, would be /vobs/... Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Sorry, yes, cleartool. (It's a bit late here.) If cleartool is there, then yeah, it's probably a repository path problem. I'd see if there's any error information in the reviewboard.log file that indicates what may be going wrong. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 2:43 AM, Géza Kulcsár gesap...@gmail.com wrote: Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For
Re: Configured repository doesn't show on New Review Request page
Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en
Re: Configured repository doesn't show on New Review Request page
Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en
Re: Configured repository doesn't show on New Review Request page
Sorry, yes, cleartool. (It's a bit late here.) If cleartool is there, then yeah, it's probably a repository path problem. I'd see if there's any error information in the reviewboard.log file that indicates what may be going wrong. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 2:43 AM, Géza Kulcsár gesap...@gmail.com wrote: Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en
Re: Configured repository doesn't show on New Review Request page
Hi! I checked and it really seems that path will be problem? Could you help me in providing correct path format? Do I only need /vobs/..., or I need a view name on top of it, or any other variation? I'm a bit confused, as your documentation mentions views somewhere, but your on-page hint states absolute path, which, from server point of view, would be /vobs/... Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Sorry, yes, cleartool. (It's a bit late here.) If cleartool is there, then yeah, it's probably a repository path problem. I'd see if there's any error information in the reviewboard.log file that indicates what may be going wrong. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 2:43 AM, Géza Kulcsár gesap...@gmail.com wrote: Do you mean cleartool? I assume then, that answer is yes. Unfortunately, I can only assume as I don't have direct access to server, I can only instruct the responsible technician. At first, when I tried to add vobs, there was an error message stating The executable cleartool is not in the path. I asked him to fix it, and it seemed that it works as I became able to add repos. The problem now is that they don't show up in the list. If cleartool is installed, could the cause still be that I'm not providing proper path information? Thanks, Géza Kulcsár 2012/12/6 Christian Hammond chip...@chipx86.com: Hey, Do you have the clearcase command line tool installed on the server? If it's not found, then it won't display. Christian -- Christian Hammond - chip...@chipx86.com Review Board - http://www.reviewboard.org VMware, Inc. - http://www.vmware.com On Thu, Dec 6, 2012 at 1:08 AM, Géza Kulcsár gesap...@gmail.com wrote: Hi! I'm trying to configure Review Board with ClearCase. I have successfully added a repository, but I'm not sure whether I'm giving path information in correct form. Could it affect if the repository showing or not in the list on New Review Request page? As I go there, there is nothing in the list but the default None option. Thanks, Best regards, Géza Kulcsár -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en -- Want to help the Review Board project? Donate today at http://www.reviewboard.org/donate/ Happy user? Let us know at http://www.reviewboard.org/users/ -~--~~~~--~~--~--~--- To unsubscribe from this group, send email to reviewboard+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/reviewboard?hl=en
