TommyGun Retro IDE Dev Software

Hi folks,I was looking at TommyGun to see what its all about its has Sam Coupe plugins. [ http://www.users.on.net/~tonyt73/TommyGun/] Has anybody used it? Any thoughts about it? Steve(spt)

Re: SamForth

Hi John,I may be wrong, but SAM has not got a Forth,..Yet! unless, you are using a Forth83 via Pro-Dos? Which, in that case download the FDos disk images here http://www.samcoupe-pro-dos.co.uk/fdos_download.htmldisk 8 has the Forth on it, as seen here

Re: SamForth

Update... Sam Supplement seems to have a SamForth on the Christmas Special.I have not used it or seen it but will now look into it spt Over seven years, between September 1990 and September 1997 60 disks were produced (including the double disk issue 12) plus sundry extras like the

Re: Samforth

also have a version of Jupiter Ace Forth which ran on a SAM. It is not an emulator and requires an amended version of the Jupiter Ace ROM. In 1991 we were not sure of the legality of it, but the Ace ROM is now freely available in the internet. interesting I think I read something about

Re: Sam or SAM or ...?

SAMas Sam seems a bit wimpish !spt.

Re: SAM in a Book !

The Amazon book listing is incorrect! - It should read £16.99 !! not £1,699.00. spt.

Re: Kaleidoscope

Hi,Kaleidoscope or The Hardware Development Kit as it was sold as can be seen in zip file, pcb scans, instructions, schematic, disk image form the Pro-dos site.download it from here: http://www.samcoupe-pro-dos.co.uk/download/HardwareDevKit.zip I've not had time to do a pdf doc of the

Re: Kaleidoscope

In a message dated 03/21/2006 11:17:02 GMT Standard Time, [EMAIL PROTECTED] writes: [EMAIL PROTECTED] wrote: Kaleidoscope or The Hardware Development Kit as it was sold as can be seen in zip file, pcb scans, instructions, schematic, disk image form the Pro-dos site.Does your board

Re: Kaleidoscope

In a message dated 03/21/2006 11:47:27 GMT Standard Time, [EMAIL PROTECTED] writes: Yes! - I will sort some out on Sunday,asthe monitor is hooked you the Jupiter Ace, and Sam is 'sleeping' at the moment! LOL -- at the pub on a laptop you can tell! opps sorry! Yes! - I will sort

whats yours?

In a message dated 12/11/2005 23:12:24 GMT Standard Time, [EMAIL PROTECTED] writes: Sam himself.I think I got Splat working though. Infuriating music to say the least.Carol Hello Carol. so is yourSam male then?.. as I`m sure both of mine are female! grin

Re: Sophistry

Hi In a message dated 12/10/2005 16:42:43 GMT Standard Time, [EMAIL PROTECTED] writes: Any idea what happened to the online rom dump that was proposed on hereabout a year ago?I think Gavin was in charge (can't rememember) but I've been away from herefor so long.johnna

Re: Printing

Hello,Yes, It should be OK!The best way is to try it and report back.! Steve(spt) www.samcoupe-pro-dos.co.ukHi all Does anybody know if it is possible to print on the sam using an epson 830 printer or printing using sim coupe Dave

MIA Fdos disks found

Hi Folks,Thanks to Wayne at Fdos for finding the missing disks.all 12 are now on the pro-dos site! see: http://www.samcoupe-pro-dos.co.uk/fdos_download.html also all my pdfs have been recompiled to remove the www link to samcoupe.orgThere will be a few more other updates soon, SCADs manual

Re: What be classed as the standard nowadays?

My Sam system/set up is Sam 512,1 floppy, Atom with CF card 256 and slave Harddrive Maxtor 7 gig an old PC spare drive. (slave drive when in use powers from an old PC psu) with a small switch fitting to switch the CF card to master or slave , normally set to master.

Re: new SamCoupe page and few guestions

Hi Elvis,and Hello!I didn't reply to any of your messages because I was busy with another project.www.jupiter-ace.co.uk Just been on your page. yon have missed on the little gems of the Sam Coupe..Pro-Dos . all you need to know is one the Pro-Dos page at:www.samcoupe-pro-dos.co.ukThe site

Re: [OT] Outlet

I have 33 to 65 steve(spt)

What has happened to Samcoupe.org ?

any one got any news about what is happening with samcoupe.org ? regards Steve(spt) steve @ samcoupe-pro-dos_co_uk

Instructions-info for SamCo Mouse and SDI interface wanted.

Hi folks, Can you please help me to find out the following, Is any one willing to scan me the instructions that came with these items? Was there any disks, drivers or other software? anyone know the default jumper setting from factory? jumperD1 - D2, sets SDI to drive 1 or 2 ? (y/n), no

Sams Jupiter Ace Emulator online.

Yep, many thanks to Edwin Blink. Sam has a new emulator, Blaze emulates the Jupiter Ace. So if you want to mess about with Forth on Sam then you need this! http://www.jupiter-ace.co.uk/blaze.html The Ace`s manual is also online as a pdf, and a ROM listing. regards to All. Steve(spt)

Re: Dvorak Layout

In a message dated 05/17/2005 14:11:15 GMT Daylight Time, [EMAIL PROTECTED] writes: Also, I've lost page C6 in the tech manual so I don't know what value 'Inverse' has. If anyone can scan this page in, please do! :-) email to you ! Steve(spt)

ANN: Pro-Dos Site off line on Sunday 8 May between 2.00 and 5.00 a.m. GMT

Hi, I have to change a few things. All will be back to "normal" by 5.00 am GMT. Any links to the site will not be affected. kind regards Steve(spt) www.samcoupe-pro-dos.co.uk

Sam Z88dk

Hi all, Has anybody use the Z88dk [ http://www.z88dk.org/] to make any Sam Z80 code. The z88 seems to support Sam, any body got any examples of how easy or hard it is to make Z80 code for Sam using Z88dk or any comments on it. Steve(spt) morrigancp @ aol . com www.samcoupe-pro-dos.co.uk

Re: system disk and Flash

done, waiting for a reply.

Re: system disk and Flash

) snip- Regards to all. Steve(spt) morrigancp @ aol . com Next pdf from me will be Tasword Two 80%.

Pro-Dos Site Update

Hi all, If you have a link to this site check your links because some pages have been added and changed, also downloads added, and files changed / updated. http://www.samcoupe-pro-dos.co.uk/hardwaredocs.html http://www.samcoupe-pro-dos.co.uk/othersammanuals.html Also I have started to

Re: Blue Two

In a message dated 02/26/2005 01:47:27 GMT Standard Time, [EMAIL PROTECTED] writes: In all those years I never needed to hook two interfaces to SAM at the sametime. But now I doso I needed to make a two way board.So I decided to make a special

Missing Fdos disks Can you help?

)-- (Steve Parry-Thomas) email : morrigancp @ aol . com

Re: How to erase sectors?

check out the SamDICE util , The manual is on the NVG pdf ed by you know who! regards Steve(spt)

Re: Ideas for the ultimate emulator :)

Have you not seen this then? regards Steve(spt) http://www.mess.org/index.html MESS is a free emulator which emulates a large variety of different systems. As of the latest CVS version, it supports the following: Adventurevision Alfa Amstrad 464plus Amstrad 6128plus Amstrad

Diagnostic`s for SAM

, Steve(spt) [ morrigancp @ aol . com ]

Re: Re[2]: Text conversion

to get listings from Sam basic in to a text file for pdfs this is what I did. install a new printer in windows that prints to text. a Generic / Text Only printer. from sim coupe just point to that printer, which prints the listing to the file. one thing to remember that by default windows

Re: Sam`s Spreadsheet Mauanls as pdf.

In a message dated 02/04/2005 13:33:32 GMT Standard Time, [EMAIL PROTECTED] writes: I've not seen it in the NVG DSKification/GoodSAMC trawl but I would guess that Steve has a copy given that he's been taking screenshots from it :-P yes, I do have a copy should a disk image be

Sam`s Spreadsheet Mauanls as pdf.

, formatting and page size to A5 will be fixed , this may abit of time but should be ready for the end of Feb. regards to all Steve [morrigancp @ aol . com ]

Re: Basic

Are there a Basic Compiler for SamCoupe ? I have never seen one. Are there a "Typedef struct" (for create a type of object) in SamCoupeBasic? This any help?:- -snip--- DEF PROC namekicks off the DEFinition of a named PROCedure,and DEF PROC must be the first keyword

Re: Development tools wanted

In a message dated 01/28/2005 14:53:15 GMT Standard Time, [EMAIL PROTECTED] writes: I still use the original orange ZX Spectrum manual as a Z80 instructionsreference. I have a version of this as pdf if you want it , or anyone else just email me! regards Steve

Re: Christmas Present

yes, I never seen one with any clothes on! Steve(spt)

Format Vo12 No02 pdf - upload

Hi Folks, Format Vo12 No 02 has been upload to the ftp.nvg.ntn.no , also if you have given me your incoming on your web site you will find it there. Someone emailed me and asked why start at the end and work backwards? Well it’s where the Sam stuff is. The pdf is searchable – happy

Re: SimCoupe formatting query

In a message dated 01/18/2005 13:12:13 GMT Standard Time, [EMAIL PROTECTED] writes: FORMAT "d2",6 and the disk formats but only reports 80 files free. ha... this works fine on my copy ! Format "d2:", 6 I get 770 kb free with 118 slots. my exe Sim Coupe exe is version 0.90 Beta 14 which

Re: Format Vol 10 No 10 [1-32].pdf sample pdf issue

Ok, all errors that I have been told about have been fix! a new upload has been made to ftp.nvg.ntnu.no /incoming If Frode couldmove it and delete the old version - please! I have had a few positive comments about it so I will start the rest. Working backwards from Vol 12 No2 as if you

Re: tech manual

In a message dated 01/16/2005 13:53:38 GMT Standard Time, [EMAIL PROTECTED] writes: I can scan the pages in if needed Yes Please , scan and send them to me and I will look at adding it to the pdf. This pdf is not one of mine but I can add to it. [ morrigancp @ aol . com ] Steve

Format Vol 10 No 10 [1-32].pdf sample pdf issue

Hi all, Format Vol 10 No 10 [1-32].pdf sample pdf issue has been upload to ftp://ftp.nvg.ntnu.no/pub/sam-coupe/ Frode will move it to the Docs as its in the incoming at the moment I think. The [1-32] = number of pages. best to get A-Reader version 7 to read it, you can search the

Can you Help With Indugs Format Fonts ID?

Hi all, I`m testing some new OCR Software which can Font match. In a test of Format to convert to PDF has worked very well, but would be better if I knew all the fonts used. Can you help in the names or even point me to where they are? regards Steve(spt)

SamDrive Users Guide Flash! pdfs

will be Sam C and Sam Vision, unless something else is requested? kind regards, Steve(spt) email : morrigancp @ aol . com

Loading Sam Tape into Sim Coupe

Hi all, This is something I have never done but with the talk of Sams tape I wondered if they can be loaded in Via the printer port , like the Z80 spectrum emulator? Do any of the emulator support this? As you could get a little gizmo [ from BG Services ] which fitted to the printer port

Re: MasterDOS

My disk is dated 6-6-92, Version 2.3 Steve(spt)

Re: Best emulator

for a Windows xp system for me it has to be the Sim Coupe by Simon Owen. www.simcoupe.org Steve(spt) www.samcoupe-pro-dos.co.uk

Re: Best emulator

for a Windows xp system for me it has to be the Sim Coupeby Simon Owen. www.simcoupe.org Steve(spt) www.samcoupe-pro-dos.co.uk

Samcoupe.org`s board AOL

Is there a problem with the php bb code and AOL users? I seem to be having a problem with it, I did have a problem with spectaculator.com until John change something.. regards, Steve(spt)

Samcoupe.org`s board AOL

Is there a problem with the php bb code andAOL users? I seem to be having a problem with it, I did have a problem with spectaculator.com until John change something.. regards, Steve(spt)

Re: Samcoupe.org`s board AOL

err.. yes I keep getting logged out. cheers Steve

Re: Samcoupe.org`s board AOL

err.. yes I keep getting logged out. cheers Steve

Re: I found the old SimCoupe version 0.76

I have a copy on one of my pc`s as well, did`nt know it was missing... Steve(spt)

Re: I found the old SimCoupe version 0.76

I have a copy on one of my pc`s as well, did`nt know it was missing... Steve(spt)

Re: Multiplayer Sam

more pdfs , SPI interface, Voicebox, and Sambus these will be onsamcoupe.org soon. Newpdfs later this month will be , Flash! Sam Dive users manual. Regards Happy New year to all. Steve(spt) www.samcoupe-pro-dos.co.uk morrigancp at aol dot com

Re: Multiplayer Sam

pdfs , SPI interface, Voicebox, and Sambus these will be on samcoupe.org soon. New pdfs later this month will be , Flash! Sam Dive users manual. Regards Happy New year to all. Steve(spt) www.samcoupe-pro-dos.co.uk morrigancp at aol dot com

Re: How to install SAMDOS?

I always just use copy , but make sure its the first file on the disk. with master dos its "save boot" Happy Christmas to all, Steve(spt) www.samcoupe-p[ro-dos.co.uk

Re: How to install SAMDOS?

I always just use copy , but make sure its the first file on the disk. with master dos its save boot Happy Christmas to all, Steve(spt) www.samcoupe-p[ro-dos.co.uk

Re: How to install SAMDOS?

O.K. boot up sim coupe with samdos in drive 1 new disk in drive 2, format it save "d2:samdos2" code 491529, 1 [ 512 machine only] or save "d2:samdos2" code 229385, 1 [256 machine only] dir 2 will show you a new disk with samdos on it . Regards, Steve(spt) [ next pdf will be

Re: How to install SAMDOS?

O.K. boot up sim coupe with samdos in drive 1 new disk in drive 2, format it save d2:samdos2 code 491529, 1 [ 512 machine only] or save d2:samdos2 code 229385, 1 [ 256 machine only] dir 2 will show you a new disk with samdos on it . Regards, Steve(spt) [ next pdf will be

Re: Sam Interface

Can I claim it ! please Steve (spt) morrigancp at aol dot com www.samcoupe-pro-dos.co.uk

Re: Sam Interface

Can I claim it ! please Steve (spt) morrigancp at aol dot com www.samcoupe-pro-dos.co.uk

Re: Sam Interface

Will, please email me off list at [EMAIL PROTECTED] then I will sent you my address! thanks Steve(spt)

Re: Sam Interface

Will, please email me off list at [EMAIL PROTECTED] then I will sent you my address! thanks Steve(spt)

Re: Sam Interface

sure , many thanks Will , my email is [EMAIL PROTECTED] Happy Christmas ! Steve(spt)

Re: Sam Interface

sure , many thanks Will , my email is [EMAIL PROTECTED] Happy Christmas ! Steve(spt)

MasterBASIC and MasterDOS pdf manuals updated

What's been changed/ updated? Well, A few spelling such as 1 [number one] being ocred as l [letter l] The manual covers have been added. You can now hyper jump from the contents page the section you want. A few of the example listings had ocr errors now fixed. url link to samcoupe.org

SamBus Info Photos pdf

Hi Folks, another pdf, this one is the SamBus. Its on the Pro-Dos site. http://www.samcoupe-pro-dos.co.uk/sammanual.html [ correct url this time , you muppet !] regards Steve(spt)

MasterBasic Manual Errors Do you know any?

Hello folks, MasterBasic pdf version 1 is 50% complete – all text has now been OCRd . Before I format the word doc , I want to ask you the following;- Q 1 . Would you like any errors in the manual fixed where they appear? yes/no Q 2. Any errors in the manual to be included as a page

MasterDos Manual pdf Version 1

Hi folks I had 10 mins spare today so here is MasterDos manual pfd version 1. Now , my Masterdos disk was version 2.1, then updated on 6/6/92 to version 2.3. if there is any thing different in the manuals from version to version then let me know, and I will compile a new pdf. Its on the

MasterBasic PDF Version 1 [ now ready ]

Hi Folks, Just had time to finnish this, and its ready for download from the Pro-Dos site. http://www.samcoupe-pro-dos.co.uk/sammanual.html [ now looking off a Sam pfd project , what would you like? ] Regards Steve(spt)

Re: MasterBasic PDF Version 1 [ now ready ]

opps --- sorry! and it was going so well ! "CONTENTS" Fixed ! Steve(spt)

Re: MasterDos Manual pdf Version 1

be version 1a] Yes/no ? I willall soinclude url in to point to the samcoupe.org site from now on. Regards Steve(spt) morrigancp at aol dot com

Re: Format returns

I would just like to point out that the WoS Formats are not a proper pdf, just scans placed in a word doc and then compiled into a pdf. You cannot search copy, paste any thing from them. You just as might as well have the scans. I see no point in make pfds that are just scans what do you

Sam User Guide PDF version 1

Hello folks, Here is weeks of work and the result version 1 of the users manual as a full pdf. There may be errors some text formatting may not be 100% - Yet , but its a start. If someone can tell where to dump it to the new sam archive site so I can upload it. Its 10.50 meg if you want

Users Guide Errors Do you know of any?

Hello Everyone, Some of you we be please to know that The User’s Guide by Mel Croucher has now been finished and we be available as a pdf. Before I compile the word Doc into a pdf. I want to ask if there was any thing else you would like adding or know of any errors in the manual that

Re: Sam's 15th Birthday!

Well, December 2004 see's the 15th Birthday of the Sam Coupe! Did anyonehere receive their Sam in December 1989 when they were released, and did itlive up to your initial expectations? Yes!, I got my Sam`s from a Show in Blackpool, some hotel, it was a very cold day. I think I was