Hi,
Assuming I'm concerned primarily with interoperability, is there a reason NOT
to set server signing = auto? Could it cause things NOT to work?
(I assume it could since the default is disabled)
Thanks,
Uri.
--
To unsubscribe from this list go to
Hello,
I'm upgrading my samba installation from 3.0.34 (FreeBSD 6.4)
to 3.4.x (CentOS 5.5) from SerNet.
I have LDAP based samba domain (PDC and BDC) and a homes/Profiles
member server.
I first upgraded my DCs to 3.4.9 with no problem.
I have recently installed a new file server (samba
Dear samba-users
We are experiencing some rather long logon times using SAMBA 3.5.6 on Debian
Squeeze + Windows 7 and while trying to find out why we raised the loglevel to
5 resulting in a rather large logfile. But this did give us a hint as to why we
experience so long logon times. It seems
Burned once and all that. I am setting up rsync cron jobs to back up
what I would need to completely rebuild the server.
My PDC is running with security=user. I know I have to backup:
/home
.../netlogon
.../profiles
/etc/passwd (and shadow, how to do this with rsync?)
/etc/groups (ditto)
Hallo, Robert,
Du meintest am 16.02.11:
Burned once and all that. I am setting up rsync cron jobs to back up
what I would need to completely rebuild the server.
My PDC is running with security=user. I know I have to backup:
/home
/netlogon
/profiles
/etc/passwd (and shadow,
thank you for the response, see below.
On 02/16/2011 08:21 AM, Helmut Hullen wrote:
Hallo, Robert,
Du meintest am 16.02.11:
Burned once and all that. I am setting up rsync cron jobs to back up
what I would need to completely rebuild the server.
My PDC is running with security=user. I know I
Hi Mat
How long is long? I have about 180 users with about 60 concurrent at any
given time and logon waits are not excessive.
Win7 does take longer than XP but logon time is still well under 1 minute.
Well, about one minute. We have about 250 users, but rarely more than 30-40 are
logged
Hi Dale
Check this thread to see if it might help you.
It worked well when I tried it.
http://lists.samba.org/archive/samba/2010-February/153585.html
Thanks, I'll try it out shortly
On 02/16/2011 5:56 AM, Hans Otto Lunde wrote:
Dear samba-users
We are experiencing some rather long
Hallo, Robert,
Du meintest am 16.02.11:
Burned once and all that. I am setting up rsync cron jobs to back
up what I would need to completely rebuild the server.
[...]
What else?
Command:
net getlocalsid localsid.txt
And on a rebuild, how do I use this sid instead of whatever
Just a quick call, is it possible to get Samba4 in the browser list of a
domain.
at the moment i got samba 4 running, with a samba3 member server(for
printing)
i know samba4 isn't supporting browsing yet.
can i use samba3 for the browsing part ?! (with dns proxy = yes ?)
so far so good..
I have to mention too that the workstations are windows XP.
Message original
Sujet: HUGE delays during logon time
Date : Wed, 16 Feb 2011 15:47:36 +0100
De :éric le hénaff eric.le.hen...@ens.fr
Pour : samba@lists.samba.org
Hello list
i recently replaced (1st of
Hello list
i recently replaced (1st of january) our old samba server
(debian+samba3.0.14a) to a new one (debian squeeze+samba3.5.6).
we now have HUGE delays during logon time, up to 8 minutes. The client
and servers seems to do nothing during that time.
This afternoon, i tried to logon to a
Hello List-Members,
I working still on a perfect firewall-configuration for a Samba4-AD, but
it seems to be a tricky work. Maybe somebody have any idea about my fail.
When I set back the firewall-rules, all is working perfect. The
network-devices will be connected and I can work with dsa.msc
Hi!
i have a nas and have one share for the rest of my computers
i can connect to the share from all computers so far so god :-)
but now i what the share to popup automatisk when u start win7 computers
how can i do that
i know i can mapp the share and have the box reconnet markt but thats
On 02/16/2011 10:07 AM, Helmut Hullen wrote:
Hallo, Robert,
Du meintest am 16.02.11:
Burned once and all that. I am setting up rsync cron jobs to back
up what I would need to completely rebuild the server.
[...]
What else?
Command:
net getlocalsid localsid.txt
And on a
Dear, I'll appreciate your help because I can't connect to a samba
resource. Here are the details:
Samba Server: Centos 5.5 with samba and samba-common packages
Content of smb.conf:
[global]
workgroup = somisa
server string = Test server
log file = /var/log/samba/%m.log
security = user
encrypt
Dear, I'll appreciate your help because I can't connect to a samba
resource. Here are the details:
Samba Server: Centos 5.5 with samba and samba-common packages
Content of smb.conf:
[global]
workgroup = somisa
server string = Test server
log file = /var/log/samba/%m.log
security = user
Excerpts from J. L. Cabral's message of Wed Feb 16 14:25:40 -0500 2011:
[...]
Samba Server: Centos 5.5 with samba and samba-common packages
Content of smb.conf:
[global]
workgroup = somisa
[...]
[share]
comment = recordings
path = /var/recorder
browseable = yes
writable = yes
public =
hello,
I'm having a problem I hope will be easy for someone to explain to me
how to fix. I need to migrate from an old server to a new Cisco Smart
Storage NAS, which runs some flavor of linux and is Active Directory
aware. Using something like Robocopy from the AD server, or rsync or tar
Extra info:
smbd --version
Version 3.0.33-0.19.el4_8.3
Win Server 2003-r2
thx, JD
On 2/16/2011 10:49 AM, Jim Dory wrote:
hello,
I'm having a problem I hope will be easy for someone to explain to me
how to fix. I need to migrate from an old server to a new Cisco Smart
Storage NAS, which
Hello guys,
I got a few questions about winbind / samba and multi domain
authentication.
At my company we have to different domains.
DOMAIN-A and DOMAIN-B
My smb.conf is attached (global section only).
My linux server (rhel 5.4 x64) is configured with the security mode ads
and has been
Dear Jeremy and samba team, when I move my nas to AD mode I see the smb.conf as
shown below.
what is use of passdb backend here ?, when anybody try to authenticate to samba
it uses the passdb_winbind.so and contacts the password server 10.32.125.116 to
verify login/password.
attached complete
I have Samba 3.4.11 + OpenLDAP (slapd 2.4.11) as domain controller for
small windows network. Everything works (almost) ok, but sometimes
clients report delays with access on shares on primary domain
controller (PDC) and sometimes I had problems with adding new
computers to domain.
In
Hello everyone!
I seem to be have a bit of a problem setting up a few network folders for a
my office on a Qnap storage device running Samba -v3.5.2. So I ask:
when the 'write list' of a share contains ONLY groups, and a user tries to
log on to that share, then samba authenticates against the
Dear All,
I have installed SAMBA 4 according to SAMBA4 How To
(http://wiki.samba.org/index.php/Samba4/HOWTO) instructions. Everything is
going fine but on Step No. (Configure DNS) it gives error when I try to resolve
the DNS name. i.e imran.edu.pk. The error is Connection Time Out, No Server
Dear, thanks for your help.I've logged into a Windows domain with
user: jelo and pass: rata89012.
My desktop is Windows XP SP2.
In samba server the shared resource is /var/recorder with this rigths:
drwxr-xr-x 2 root root 4096 feb 16 14:56 recorder
The Unix local user is jelo with pass
Dear, thanks for your help.I've logged into a Windows domain with
user: jelo and pass: rata89012.
My desktop is Windows XP SP2.
In samba server the shared resource is /var/recorder with this rigths:
drwxr-xr-x 2 root root 4096 feb 16 14:56 recorder
For starters try
chown -R
To boil this down a bit, maybe my problem is that my domain users on
the old server are for instance jimd, and on the new NAS they show up as
Domain+jimd. Or in this example, CN+jimd. So if I try to move files to
the NAS, it doesn't recognize those users (without the prefix CN+) as
users. The
Dear, changing the owner doesn't work for me.
So I decide to connect to the share resource without user
authentication, just see the resource for all the users from my
LANthis is the simplest way I can see the samba resource I think.
How can I do this succesfully ??? Or in other words what
Hello Imran,
have you a running client/server-firewall?
Regards
Bert
Am 15.02.2011 15:27, schrieb Imran Ashraf:
Dear All,
I have installed SAMBA 4 according to SAMBA4 How To
(http://wiki.samba.org/index.php/Samba4/HOWTO) instructions. Everything is going fine but
on Step No. (Configure
also make sure your DNS server is up and
running(and resolving), your firewall is ok and your configed it right.
dns can be a bit of pain, but check your logs and it's doable...
Cheers, Collen
On 17-2-2011 8:31, nc-codew...@netcologne.de wrote:
Hello Imran,
have you a running
The branch, master has been updated
via bfa7964 s3-ipasam: Add aliases for trusted domain user
via 7763816 s3-netlogon: Implement NetrServerGetTrustInfo and
NetrGetForestTrustInformation
via 9e7 s3-ldap: Add sambaTrustForestTrustInfo to LDAP schemata
via
The branch, master has been updated
via b03a171 s3:test: mark the net_registry_roundtrip test as knownfail
via fca4238 s3:test: add the registry roundtrip test as
samba3.blackbox.net_s3_registry_roundtrip
via df4044e s3:test: move the registry roundtrip test to a test
The branch, master has been updated
via c66dfe4 s3-build: move priv2ld proto to smbldap.h (in order to fix
non-ldap builds).
from b03a171 s3:test: mark the net_registry_roundtrip test as knownfail
http://gitweb.samba.org/?p=samba.git;a=shortlog;h=master
- Log
The branch, master has been updated
via c819e3e s3:test: run the net.rpc.registry test under dc not
dc:local
via ae9eca6 s3:test: remove the give/take admin rights code from the
net(rpc)registry test
via 8e45fb4 s3:test: rename samba3.blackbox.testparm_s3 -
The branch, master has been updated
via 5d3f956 s3-waf: add check for __NR_inotify_init declaration.
via a029235 s3-waf: add check for various sysconf() variables.
via 9d78512 s3-waf: add check for posix_fadvise().
via 1cc0fb5 s3-waf: add check for hires timestamps
The branch, v3-6-test has been updated
via 34b24e6 s3-waf: add check for __NR_inotify_init declaration.
via ee8c85a s3-waf: add check for various sysconf() variables.
via 6eed406 s3-waf: add check for posix_fadvise().
via 8bac04b s3-waf: add check for hires
The branch, master has been updated
via 9e822f1 s3-waf: add check for struct stat st_flags member.
via afb77d1 s3-waf: add some missing checks for macosx.
from 5d3f956 s3-waf: add check for __NR_inotify_init declaration.
The branch, v3-6-test has been updated
via aee5e95 s3-waf: add check for struct stat st_flags member.
via 1662422 s3-waf: add some missing checks for macosx.
from 34b24e6 s3-waf: add check for __NR_inotify_init declaration.
The branch, master has been updated
via 78c4b21 s3-selftest: make sure we really use --format=subunit when
calling smbtorture4.
via a759b1a s4-build: added LOCALEDIR config option
via e1f2442 s3-waf: move the KRB5_DEPRECATED configure check out of
lib/replace
via
The branch, 1.2-splitbrain has been created
at bd556db13a84327f5a6d20cc22a5fc794980a6d1 (commit)
- Log -
---
--
CTDB repository
The branch, foo has been created
at f098854500f36b03ebf6c3b4a6da0dd867ce9cf1 (commit)
- Log -
---
--
CTDB repository
The branch, 1.2 has been updated
via faf3b1542fd27b3ad32ac7b362ef39d8cb0b05ff (commit)
from bd556db13a84327f5a6d20cc22a5fc794980a6d1 (commit)
http://gitweb.samba.org/?p=sahlberg/ctdb.git;a=shortlog;h=1.2
- Log -
The branch, master has been updated
via 5c12cb0 heimdal Pass F_CANON down to the hdb layer for servers in
AS-REP as well
via 0dec840 Add support for testing a Win2k3 domain member
via 5425227 wintest upper case the --vms paramter arguments to
wintest.py
from
44 matches
Mail list logo
