to a US address.
I will only if order is pre-paid.
-Bryan Lugert
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
NEW 120 Amp Nippendenso Alternator $125.00 Shipped!
No Core Needed!
You will get one NEW 120 Amp Nippendenso Alternator $125.00 Shipped!
(US address only) Canada address would be additional cost.
Direct bolt on
FS: Turbo Van Plymouth Voyager 1989
A few years back I ran 14.8 @ 92 mph
I have also circle raced the van once.
Has been my daily driver and tow vehicle for 4+ years now.
I just returned from a 2,500 mile trip
What an Nice comment by Chris P. from Modesto CA.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, December 05, 2005 11:11 PM
To: [EMAIL PROTECTED]
Subject: Re: SD FS: Turbo Van Plymouth Voyager 1989 WHITE VAN (aka TRBOVAN)
glad your selling it.. your
Details are here:
http://www.turbododge.com/forums/showthread.php?t=103048
-Bryan
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Ray,
There are a few who do it.
Do a search on TurboDodge.com
-Bryan
-Original message-
From: ray [EMAIL PROTECTED]
Date: Thu, 27 Oct 2005 15:14:32 -0500
To: [EMAIL PROTECTED]
Subject: SD water injection
Just a question I'd thought to throw out here, Anyone ever try a water
1987 Dodge Shadow Race Car, Rolling Chassis.
Rust free.
White in color.
Chrome moly 8 point cage with dash bar, frame ties and cross bracing, window
net, tach mount, camera mount and gauge mounts.
Cage is good to
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemitem=7997036997
Item # 7997036997
Good Luck!
I will be adding my Shelby Valve Cover also.
-Bryan Lugert
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed
Thanks to all the have responded.
Centurians are SOLD.
Steering Wheel is SOLD.
Valve cover is still available.
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bryan Lugert
Sent: Sunday, August 28, 2005 9:16 PM
To: Shelby
Subject: SD Shelby Parts
Centurian II's:
These are in decent condition.
$300.00 shipped to a US address.
Shelby Steering Wheel:
Complete with horn cap and adapter.
$200.00 shipped to a US address.
Shelby Valve Cover:
From a 1987 car.
Needs to be refinished in my opinion.
$200.00 shipped.
-Bryan
-Bryan Lugert
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Eric .
Sent: Wednesday, August 03, 2005 11:06 PM
To: SDML
Subject: Re: SD Hm? electric water pump anyone?
well, this is hardly news, CSI has had a 2.2 2.5 electric waterpump
for YEARS. It has
Reserve was met at $2,700!
Current bid $5,400
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemrd=1item=456106714
8
Good Luck!
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit
There is also a section for Exterior discussion on www.turbododge.com
There might be a few there looking for those parts.
I would at least give it a shot.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jason Arroyo
Sent: Wednesday, March 09, 2005 10:16 PM
The van that won was a Turbo Van.
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Monday, February 28, 2005 1:34 AM
To: [EMAIL PROTECTED]; shelby-dodge@sdml.org
Subject: Re: SD Backwards minivan racing?
I saw this backwards
And the Turbo Van WON!
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David Salamone
Sent: Saturday, February 26, 2005 8:23 PM
To: Shelby Dodge Mailing List
Subject: SD Backwards minivan racing?
I was just sitting back doing some channel surfing
$440 shipped to US address!
I will not place the order until I get 10 confirmed orders.
I would prefer Money Orders/Personal Check on this round.
You have to let me know if you want a BLACK face, or a WHITE face.
You can rest assured on the sales and service I provide.
-Bryan from RockRacing.
Quality Rebuilt Starter.
It will fit any Turbo Dodge vehicle with the 2.2 or 2.5
NAPA price is $124.00, plus $22.00 core ($146.00)
My price is $65.00 shipped to a US address.
-Bryan
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit
Hey Corey,
Just so you know, I ran that turbo you bought on my race car.
I was running 30-32 psi with a stock head (2.2 engine)
I was able to achive 11.52 @ 114.73 (337whp on the dyno)
On the other hand, my brother ran 11.30 with only 25 psi
(He had a ported head, otherwise same car config)
So
Okay, the time is set.
5:00 pm is the start time. (Majority rules)
I would suggest getting there 15 minutes early to get shoes and whatever.
Please let me know who is coming.
I need to tell the bowling alley the number of players.
-Bryan
-Original Message-
Bowling Saturday December
As before the price is too low to post in public.
I will not place the order until I get 10 confirmed orders.
I would prefer Money Orders/Personal Check on this round.
Too many dang fees for you and me with Paypal!
You have to let me know if you want a BLACK face, or a WHITE face.
You can rest
T04E Compressor Housing with T04E 50trim Wheel and .63 A/R T3 Turbine
Housing with Stage III Wheel.
Supports 450hp.
Make a serious offer via e-mail direct.
This was on my race car.
Absolutely nothing wrong with it.
I ran 11.52 @ 114.73 at the track and 337 Whp on the Dyno with this turbo.
No, but they are low miles.
1986 SHELBY-AMERICAN GLHS, 4 door one of 500 choice of two $7,950 w/73k
miles, $10,900 w/43k miles, both really nice cars!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Robert Meier
Sent: Friday, November 12, 2004 6:54 PM
To:
I forgot to mention that the 11mm hole version alternators is what is on the
1989 and up cars.
1988 and older have the 8mm hole.
-Bryan
-Original Message-
Here you are.
Factory replacement alternator for our 2.2 and 2.5's is the following
numbers
Lester Number (any place should know
The starters are all the same.
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Thursday, November 04, 2004 9:29 AM
To: [EMAIL PROTECTED]
Subject: Re: SD Starter died need part # 86 GLHS
Hi All
Thanks for all the info. The
Here you are.
Factory replacement alternator for our 2.2 and 2.5's is the following
numbers
Lester Number (any place should know what that means)
13280, 13304, 13308, 13313
That is 120 amp and a direct bolt in replacement.
This alternator has an 8mm hole
To get the 136 amp you have to get Lester
I have a Rebuilt Bosch Starter for sale.
Totally rebuilt with new solenoid.
$75.00 plus shipping (Or I will be at Turbopalooza this weekend)
Same one from NAPA is $124.00 plus a $45 core charge. ($169.00)
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf
Sounds like you are talkling about a starter.
The parts common to an Alternator are: Rotor, Stator, Slip Ring, Bearings,
Brushes, Rectifier. (and regulator in most cases)
In the Chrysler Alternators the main thing that goes out is the brushes.
Very cheap to buy.
You could get a set of brushes
THE biggest thing that kills alternators is jump starting your car when the
battery is dead.
That will blow the diodes in the rectifier.
Also, remember the old test where you would unplug the battery to see if the
alternator (generator) was doing it's job? Well DO NOT DO IT! Cars today
are not
What vehicle do you have this in?
You mentioned 1985 Wiring, but what Model vehicle?
Autozone and Napa get there rebuilt alternators from the same places
usually.
-Bryan
-Original Message-
I am throughly frustrated with Autozone and other parts stores and the
quality of the rebuilt
I have a Rebuilt Bosch Starter for sale.
Totally rebuilt with new solenoid.
$75.00 plus shipping (Or I will be at Turbopalooza next weekend)
Same one from NAPA is $124.00 plus a $45 core charge. ($169.00)
==
I have an Alternator for sale.
It is a
I would like a copy of this message I sent to the list if anyone still has
it archived.
The eScribe does not diplay the message for me.
SD FS: Intake - Intercooler - Valve Cover
From: Bryan Lugert
Date: Sat, 7 Aug 2004 19:31:59
Thanks,
-Bryan
SD FS: Intake - Intercooler - Valve Cover
From
Thank you to all who replied.
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bryan Lugert
Sent: Tuesday, October 12, 2004 9:51 PM
To: [EMAIL PROTECTED]
Subject: SD Need copy of message.
I would like a copy of this message I sent to the list
I am leaving in a few hours for Vegas.
Tomorrow is my 10 wedding anniversary.
-Bryan Lugert
11.52 @ 114.73
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Custom ROSS pistons made to RP specs with .912 pins and spiral locks,
The toughest 2.2 or 2.5 pistons money can buy!
$450 plus shipping.
These are for 2.2 and are .040 over bore.
Picture here:
http://www.turbododge.com/forums/showthread.php?t=62147
-Bryan
Let me know if you have one.
I have a 1990 SBEC 5 speed from a Van for trade if you so desire.
-Bryan
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Custom ROSS pistons made to RP specs with .912 pins and spiral locks,
The toughest 2.2 or 2.5 pistons money can buy!
$450 plus shipping.
These are for 2.2 and are .040 over bore.
Picture here:
http://www.turbododge.com/forums/showthread.php?t=62147
-Bryan
Let me know if you have one.
I have a 1990 SBEC 5 speed from a Van for trade if you so desire.
-Bryan
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Custom ROSS pistons made to RP specs with .912 pins and spiral locks,
The toughest 2.2 or 2.5 pistons money can buy!
$450 plus shipping.
These are for 2.2 and are .040 over bore.
Picture here:
http://www.turbododge.com/forums/showthread.php?t=62147
-Bryan
Do you want them for racing or daily driving?
I sell Bogart Racing Wheels.
-Bryan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of C C
Sent: Thursday, July 29, 2004 2:08 PM
To: [EMAIL PROTECTED]
Subject: SD lightweight wheels
I was just wondering if
39 matches
Mail list logo