You should say (since you wont ship) where you are.
Johnny Spiva
PO Box 4283
Coos Bay Oregon 97420
--
http://polybushings.com
1. Free stuff (Jim Murphy)
--
I have the
I need some help from the best. My 87 GLHS runs like it is skipping bad at idle
but runs smoother at about 2500-3000 RPMs. It fouled out the plugs on
cylinders 2,3,and 4. Number one looks ok. I replaced the distributor cap, same
thing. I set the timing to 12 degrees (unplugged the temp
Have not responded to this list in a VERY long timesorry if I'm doing it
wrong.
When you had the distributor cap off, did you check to see if the hall effect
shutter was still attached? The plastic welds are known to fail and the
metal shutter flops around causing the hall effect sensor
Engine is mint 5,000 miles after complete rebuild. Paint is a little rough.
Car is strait. Interior is very clean. I'm the original owner.
'89 T2 Engine w/diode mod-ECM (all the boost you need until a piston goes)
Venola Forged Pistons
555 Trans
2.5 Mandrel exhaust
All of Gus's Cool Mods
- 5th
Has anyone adapted a Walbro 255lph hp fuel pump to mount in the original
fuel tank?
If so, any guidance or links to web pages?
Dennis in Tricities, WA
___REMOVE-FOOTER-WHEN-REPLYING_
ShelbyDodge mailing list
ShelbyDodge@imagilist.com
Right priced motors
___REMOVE-FOOTER-WHEN-REPLYING_
ShelbyDodge mailing list
ShelbyDodge@imagilist.com
http://www.imagilist.com/mailman/listinfo/shelbydodge