Hey guys,
Do any of you have much experience reshafting PingEye2's. I have the
original BeCu's Square groove and a few years ago had Rifle Lite 5.5's
put in them which I am now wanting to change out. I will most likely
have a club builder in my area do the reshafting but I wanted to know
if these r
heads was ShopTalk: Two Ball Putters
Mark,
Depends upon the 2 or 3 iron :-) The best thing to do is
to look at the web page mentioned below. It has a very good
picture of the club from an address position.
/Ed
Mark Linder wrote:
> Thanks Ed,
> I am going to check those out as well. I reall
ts (also .370) and read that regular iron shafts
aren't the answer for utility clubs (nor or wood shafts). I thought
they were the solution until I heard they aren't available because
of the Traker naming issue. (Still need to call and see if there
is anyway to get one).
/Ed
Mar
to get a price on
a
head only. I'm assuming that price is assembled since there are dropdowns
for shaft flex, etc. That sounds like the right amount
of
offset for my taste.
Thanks again.
PS. Any of you guys work out of middle Tennessee?(Nashville
area
imilar to the
Adams
or Taylor Made rescue. I have always hit these well and have
finally decided to add one or to to my bag.
Mark Linder
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf
Two Ball Putters
Could anyone recommend a manufacturer of component heads
that makes a good utility head similar to the Adams
or Taylor Made rescue. I have always hit these well and have
finally decided to add one or to to my bag.
Mark Linder
I have liked the weight of the Callaway 2 ball. Anyone know how much it
ways?
I am also considering a belly putter but won't pay for a Callaway.
Mark Linder
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Burgess Howell
Sent: Wednesday, March 05, 2003
offset for my taste.
Thanks
again.
PS.
Any of you guys work out of middle Tennessee?(Nashville
area)
Mark
Linder
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of Royce
EnglerSent: Wednesday, March 05, 2003 10:12 AMTo:
[EMAIL PROTECTED]S
lways hit these well and have finally decided to
add one or to to my bag.
Mark Linder
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On
Behalf Of Bob DavisSent: Monday, March 03, 2003 11:09
AMTo: [EMAIL PROTECTED]Subject: Re: Sho
a big bounce angle for steeper swings. Anyway, neat
topic. Lots of pros grind their own wedge soles to get that perfect feel.
OTOH, since this is a very subjective topic, maybe it's trouble here... :-)
Pat K
>
> From: "Mark Linder" <[EMAIL PROTECTED]>
> Date:
and wedges is good enough for the guys on TV
they're sure as hell good enough for us ;-)
TFlan
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Mark Linder
> Sent: Tuesday, March 04, 2003 9:39 AM
> To: [EMAIL PROTECTED]
> Subje
Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mark Linder
Sent: Tuesday, March 04, 2003 11:14 AM
To: [EMAIL PROTECTED]
Subject: RE: ShopTalk: Bending Ping BeCu's
That's a good point. Since I have no experience building clubs yet
I didn't realize
unce will be after you've
bent it?
Brian
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mark Linder
Sent: Tuesday, March 04, 2003 9:39 AM
To: [EMAIL PROTECTED]
Subject: RE: ShopTalk: Bending Ping BeCu's
Has anyone here had any experience changin
h my 60*. thanks for any feedback.
Mark Linder
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bernie Baymiller
Sent: Sunday, March 02, 2003 12:52 PM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Harrison Spineless Technology
Pat,
Why do you need someone els
Could
anyone recommend a manufacturer of component heads that makes a good
utility head similar to the Adams
or
Taylor Made rescue. I have always hit these well and have finally decided to add
one or to to my bag.
Mark
Linder
-Original Message-From: [EMAIL PROTECTED
;s?
Thanks,
Mark Linder
Cedar Hill, Tenn.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 11:40 PM
To: [EMAIL PROTECTED]
Subject: ShopTalk: Alan's Note on Spines
Alan:
Damn, your note on spines brought tea
16 matches
Mail list logo
