> On Feb 11, 2018, at 12:10 PM, Timothe Litt wrote:
>
> Lighting is an issue, as is compensating for keystoning and other
> misalignments. Most cameras don't have a standard remote trigger interface -
> one of the pointers I provided loads modified firmware into cameras from
Almost every wide printer had adjustable widths. If this is a problem
try a different printer. Non-standard lengths may be more of an issue.
If you shoot an entire page at a time line spacing is a problem for your
OCR software.
With tractor feed page length variability should not be an issue
*"so I guess question 1: how best to get rid of the folds? my method so
far: fold them the other direction and try and fold it out, but so far not
much luck"*
If you have a big wad of paper that has been folded in half newspaper
style, fold it the other way a few times. Then place it concave side
On 11-Feb-18 14:29, Davis Johnson wrote:
> I think what you need is a wide carriage printer with the typical feed
> up through a slot in the bottom, and a camera.
>
> The only working function needed from the printer is form feed.
> Photograph the page that is hanging below the printer, form feed
I think what you need is a wide carriage printer with the typical feed
up through a slot in the bottom, and a camera.
The only working function needed from the printer is form feed.
Photograph the page that is hanging below the printer, form feed and repeat.
Anybody here ought to be able to
Zork (Dungeon) for VAX/VMS is available here:
http://simh.trailing-edge.com/games/dungeon.zip
The sources to Adventure (VAX/VMS version) are also online, as is the MDL
source for Zork. I have the PDP-11 version of Adventure as well.
/Bob
On 2/11/2018 1:22 PM, simh-requ...@trailing-edge.com
On 02/11/2018 09:45 AM, Timothe Litt wrote:
> Scanning code is a bit different from scanning books. Listings tend
> to have headers, footers, (tractor feed holes), notations - in some
> cases, assembly code or other columns - separate from the code.
> Plus lines and/or colored bars.
Back in
On 2/11/18 10:11 AM, Dan Gahlinger wrote:
> which is why I wondered what people thought of turning an old DEC teletype or
> printer into a scanner, by fixing a camera
> to it
sounds like a bigger version of the Thunderscan
https://www.folklore.org/StoryView.py?story=Thunderscan.txt
Yes it comes up time and again, and book scanning projects only work so well.
which is why I wondered what people thought of turning an old DEC teletype or
printer into a scanner, by fixing a camera to it,
you could even start by turning pages manually.
at least the tractor feed would hold the
On 2/11/18 9:45 AM, Timothe Litt wrote:
> Scanning paper efficiently requires an investment. This would seem to be
> something that could best be centralized (or
> regionalized). Al Kossow (chm/bitsavers) has hardware for efficiently
> scanning manuals, but I don't know if it handles
> 11 x
These opportunities keep coming up; lots of us archived paper, which
survives longer than magnetics - and their transports.
These seem to be addressed as one-off projects. It would be more
efficient if a group of interested people could develop/find a sponsor
for a listing -> code facility. But
Look at the diy book scanning community for inspiration and make sure that
the light comes at an angle that doesn't reflect in to the camera.
I just found a led light fixture that pumps out as lot of light and is long
as a "tube light" 1,2m (approximately 1,5 yards)
//Pär
Den 11 feb. 2018 5:09 PM
> On Feb 11, 2018, at 6:55 AM, Dan Gahlinger wrote:
>
> I have several printouts like this,
> the one I was just trying to scan in is labelled "EMPIRE Version 4.0
> 18-Jan-81"
> with the notice: "Please send bug reports to ELROND::EMPIRE"
> This is a Vax/VMS Fortran
I have several printouts like this,
the one I was just trying to scan in is labelled "EMPIRE Version 4.0 18-Jan-81"
with the notice: "Please send bug reports to ELROND::EMPIRE"
This is a Vax/VMS Fortran conversion from TOPS-10/20 from sources from around
fall 1979
It seems I only have the first
14 matches
Mail list logo