Re[2]: [sniffer] New Version 2-3.2 has been officially released.
On Monday, December 6, 2004, 4:12:19 PM, Keith wrote: KJ> Pete, KJ> I saw one last week upon updating at: KJ> http://www.sortmonster.com/MessageSniffer/Installation/HowTo.html KJ> Under the heading: KJ> Where to start (with the demo!): KJ> I hope this helps. All fixed. Thanks! _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
Re[2]: [sniffer] New Version 2-3.2 has been officially released.
On Monday, December 6, 2004, 3:56:45 PM, Mark wrote: MES> Got it.. MES> Problem is that now my persistent sniffer isn't working. MES> None of the persistent.stat files are there. MES> Anyone else seeing this? MES> All I did was to swap out the .exe and restart the service. Be sure that the full path to the .exe is used in your persistent server setup for the executable and the working directory. Also be sure there wasn't a typo in renaming the .exe for your license ID. These two seem to be the most common upgrade issue. _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
RE: Re[2]: [sniffer] New Version 2-3.2 has been officially released.
Pete, We plan to, working on the SrvAny service in beta right now. Thanks again for the aid and time. Keith -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pete McNeil Sent: Tuesday, November 23, 2004 5:07 PM To: Keith Johnson Subject: Re[2]: [sniffer] New Version 2-3.2 has been officially released. On Tuesday, November 23, 2004, 4:19:35 PM, Keith wrote: KJ> We run Sniffer in the normal way (non-persistent), is there an extra KJ> file that we must copy into the Sniffer directory in order for this KJ> version to work properly? I believe I read somewhere of a config KJ> file that contains needed settings. Thanks again, Nothing in the .cfg file is strictly needed. If you don't have one, then copy the one that comes with the distribution. You _may_ want to use one or more of the features at some point. If you don't have it then it is ignored. (Backward compatibility). _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
Re[2]: [sniffer] New Version 2-3.2 has been officially released.
On Tuesday, November 23, 2004, 4:19:35 PM, Keith wrote: KJ> We run Sniffer in the normal way (non-persistent), is there an extra KJ> file that we must copy into the Sniffer directory in order for this KJ> version to work properly? I believe I read somewhere of a config file KJ> that contains needed settings. Thanks again, Nothing in the .cfg file is strictly needed. If you don't have one, then copy the one that comes with the distribution. You _may_ want to use one or more of the features at some point. If you don't have it then it is ignored. (Backward compatibility). _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
Re: Re[2]: [sniffer] New Version 2-3.2 has been officially released.
Hi, > BB> Just to let you know. We had a problem after updating to 2.3.2 this morning > BB> where suddenly a lot of our internal mail got caught as spam by sniffer. Ive > BB> allready sent a report to the support address. For whatever reason I could > BB> net send to the false@ address. > > BB> All I did was replace the 2.3.1 exe with the 2.3.2 exe (of course with the > BB> correct id name). > > I am unable to duplicate your results. > I have re-verified my testing. > I have version 2-3.2 running on our test server without any problems > and it is capturing 9+ / 10 messages which is typical. > > Please verify that you have the correct executable in place by running > the program from the command line with no parameters. The correct > build information is: > > build - v2-3.2 Nov 23 2004 01:21:33 > > Then please also verify that you have the correct rulebase in place. The version is the same as you say. The rulebase was downloaded last night and later that morning once more but not updated because there were no changes. I verify every downloaded rulebase. Like I wrote, all I did was early thismorng replace the 2.3.1. exe with the 2.3.2 exe. After that the problems started. When I replace the 2.3.2 exe with the 2.3.1 exe all problems disappeared. As I had to attend a seminar this afternoon I did not any time for further testing. I just once more "installed" the 2.3.2 exe, we'll see what happens. As it is close to 9 PM overhere it should not disrupt any business going on and let me do some testing. Did you receive the mail I sent along with the "caught" e-mail and the logfiles? Anything that pointed to a special rule? Should I change the logging when this happens so as to provide more information about what might be happening? > Hope this helps, > _M We'll see. Groetjes, Bonno Bloksma Back up my hard drive? How do I put it in reverse? --- [E-mail scanned at tio.nl for viruses by Declude Virus] This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
RE: Re[2]: [sniffer] New Version 2-3.2 has been officially released.
No problems experienced here on either of our servers. Bill -Original Message- From: Pete McNeil [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 23, 2004 6:12 AM To: System Administrator Subject: Re[2]: [sniffer] New Version 2-3.2 has been officially released. On Tuesday, November 23, 2004, 6:33:13 AM, System wrote: SA> on 11/23/04 6:08 AM, Bonno Bloksma wrote: >> Just to let you know. We had a problem after updating to 2.3.2 this >> morning >> All I did was replace the 2.3.1 exe with the 2.3.2 exe (of course >> with the correct id name). SA> Bonno, SA> Thanks for the report. I was just about to do the upgrade but now I SA> think I'll hold off until I hear from Pete (or you) about the SA> situation. I have no indications of a problem and I have just re-verified my testing. Please give this a try and report any success, errors, or problems. In my testing the build information from the distribution and on my test server are: build - v2-3.2 Nov 23 2004 01:21:33 You can get the build information by running the sniffer executable on the command line without any parameters. Thanks, _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html --- This message and any included attachments are from Siemens Medical Solutions USA, Inc. and are intended only for the addressee(s). The information contained herein may include trade secrets or privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you received this message in error, or have reason to believe you are not authorized to receive it, please promptly delete this message and notify the sender by e-mail with a copy to [EMAIL PROTECTED] Thank you This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
Re[2]: [sniffer] New Version 2-3.2 has been officially released.
On Tuesday, November 23, 2004, 6:33:13 AM, System wrote: SA> on 11/23/04 6:08 AM, Bonno Bloksma wrote: >> Just to let you know. We had a problem after updating to 2.3.2 this morning >> All I did was replace the 2.3.1 exe with the 2.3.2 exe (of course with the >> correct id name). SA> Bonno, SA> Thanks for the report. I was just about to do the upgrade but now I think SA> I'll hold off until I hear from Pete (or you) about the situation. I have no indications of a problem and I have just re-verified my testing. Please give this a try and report any success, errors, or problems. In my testing the build information from the distribution and on my test server are: build - v2-3.2 Nov 23 2004 01:21:33 You can get the build information by running the sniffer executable on the command line without any parameters. Thanks, _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
Re[2]: [sniffer] New Version 2-3.2 has been officially released.
On Tuesday, November 23, 2004, 6:08:34 AM, Bonno wrote: BB> Hi, BB> Just to let you know. We had a problem after updating to 2.3.2 this morning BB> where suddenly a lot of our internal mail got caught as spam by sniffer. Ive BB> allready sent a report to the support address. For whatever reason I could BB> net send to the false@ address. BB> All I did was replace the 2.3.1 exe with the 2.3.2 exe (of course with the BB> correct id name). I am unable to duplicate your results. I have re-verified my testing. I have version 2-3.2 running on our test server without any problems and it is capturing 9+ / 10 messages which is typical. Please verify that you have the correct executable in place by running the program from the command line with no parameters. The correct build information is: build - v2-3.2 Nov 23 2004 01:21:33 Then please also verify that you have the correct rulebase in place. Hope this helps, _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html