In a message dated 4/15/2005 11:31:35 PM Eastern Daylight Time, [EMAIL PROTECTED] writes:
Stud Bug
No way! Stud implies male gender, a really bad choice for Manti - males are killed and eaten by the females after breeding. Good Lift!
Greg--
Go to the CNCFoamcutters group on Yahoo. There are lots of us out here doing
exactly what you are looking for and I'm sure there is someone in your neck
of the wood. If you don't find someone close by let me know what you need
and I'll see if I can help.
Dan
- Original Message -
F
Anyone know of someone who's doing custom EPP foam cutting, especially
no-template computer-aided cutting?
I need a new wing for my Diversity Models Maddog, it's a simple ~36" span
constant-chord with a symmetrical Selig airfoil. I've got one offer from
someone who'll assist me in doing it if I m
Oops, I goofed, I was reall thinking about the 72 stuff and I certainly did not
mean to slight the ham operators. Although some interesting comments were
brougt to the exchange and we all can benefit from that.
I did get a couple of private posts that took me to task for even daring to
comment
You guys want a real AMA#?
Go out and get it the old fashioned ways.
Like Chuck - live long and prosper. Along the way, attain a cherry first
owner classic 'Vette, get your spouse an AMG 'Cedes, all the awards you could
ever hope for from your peers, and the planes you deserve. Kudos to yo
Stud Bug
At 10:25 PM 4/15/2005, [EMAIL PROTECTED] wrote:
Man PrettyTis?
Manly Mantis?
Das Plane?
Jim
Downers Grove, IL
Member of the Chicago SOAR club, and Team JR
AMA 592537LSF 7560 Level IV R/C Soaring blog at www.jimbacus.net
RCSE-List facilities provided by Model Airplane News. Send "su
Man PrettyTis?
Manly Mantis?
Das Plane?
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
Email sent from web b
On Sat, Apr 16, 2005 at 12:49:25AM +, [EMAIL PROTECTED] wrote:
| If it ain't type accepted then it ain't legal at sanctioned
| contests.
As others have suggested, this does not apply to ham band equipment.
Ham band equipment does not require type-acceptance, though if mass
produced (as most
Hi All,
I have just received the first batch of EVO 9 and 12 fully
synthesized Transmitters and Receivers, I have 2 of each ready for
immediate delivery.
I also have 1, 12 ch Receiver available, and a scanner module.
If interested, call the shop 800-532-0092 on Monday.
Thanks for
Guys,
> If it ain't type accepted then it ain't legal at sanctioned contests.
This is 50 mHz, so as long as the user has a valid amateur radio license
they can use any kind of antenna they want - as long as it produces a clean
signal. There is NO type acceptance needed.
regards,
Jim Porter N0
At 07:49 PM 4/15/2005, you wrote:
If it ain't type accepted then it ain't legal at sanctioned contests.
Mind you, I don't care and I'm not going to complain, but there is someone
out there that might, so if I were you, I'd keep the standard long, ugly
antenna in my flight box at all times.
Regar
http://www.jimbacus.net/blog/2004/1/23.html
At 07:40 PM 4/15/2005, [EMAIL PROTECTED] wrote:
Look up Jim Bacus's web site for the spoiler ball joint linkage. It works
very well.
Jim
Downers Grove, IL
Member of the Chicago SOAR club, and Team JR
AMA 592537LSF 7560 Level IV R/C Soaring blog at
If it ain't type accepted then it ain't legal at sanctioned contests.
Mind you, I don't care and I'm not going to complain, but there is someone out
there that might, so if I were you, I'd keep the standard long, ugly antenna in
my flight box at all times.
Regards, Dave Corven.
>
> I have
Fred, I have JR 3321's in my AVA's fuse and a JR 341 in the spoiler bay. Look
up Jim Bacus's web site for the spoiler ball joint linkage. It works very well.
I stayed with analog servos and with an 1100 nicad pack you can fly all day.
JR 368's or Volz servos are also good choices. I installed th
At 12:46 PM 4/15/2005, Phil Barnes wrote:
Would "Prettyman" be better? ;-)
It's the "Pretty" part that this manly man finds disturbing. How about
"Luchenbach Mantis" fuselage that is used to build a "Luchenbach Mantis"
or an "Aegea Mantis".
Well, I think of it as "pretty". Darn it all, if the ma
Get a grip - it's only a number.
Dan"Craig D. Allen" <[EMAIL PROTECTED]> wrote:
The AMA policy of reusing old AMA #'s just plane sucks!Is nothing sacred anymore???It is totally disrespectful to reuse the AMA # of someone who lovedand participated in the early days of this hobby but has since pass
All
I know this subject comes up from time to time, hence when I spotted this
http://www.sparkfun.com/shop/index.php?shop=1&cart=225472&cat=1&itemid=396&;
I thought a few of you might be interested to know about it.
I saw these guys as they have a fixed price per area PCB manufacturing gig
goin
You can't delete an e-mail that has been sent to the list. Once the
message leaves your computer it's gone. RCGroups is just a mirror for
this e-mail list.
-Ben
Jim Laurel wrote:
Once again, I don't know how this is getting pushed to the soaring exchange
several days after it was deleted from
Oh come now... "Let's go to Luckenbach, Texas, with Willie and Waylon and
the boys..."
At 03:02 PM 4/15/2005 -0700, you wrote:
Because we can't pronounce those words??
-Original Message-
From: Phil Barnes [mailto:[EMAIL PROTECTED]
Sent: Friday, April 15, 2005 12:46 PM
To: soaring@airage
I have a NIB FS01
- Custom paint job on wings---2 red racing stripes on each wing tip
- White wings super-light stabs and rudder - clear red covering
$675 plus shipping and insurance from Bellevue WA.
Russ Young
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Because we can't pronounce those words??
-Original Message-
From: Phil Barnes [mailto:[EMAIL PROTECTED]
Sent: Friday, April 15, 2005 12:46 PM
To: soaring@airage.com
Subject: Re: Re: [RCSE] Pretty Mantis Fuse Kit
- Original Message -
From: <[EMAIL PROTECTED]>
> Would "Pretty
Where can I buy some Futaba S3150 digital servos? Need them in a hurry and
Servo City always seem sout or low on stock lately.
Thanks, Walter
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
u
I have just received my new AVA from Kennedy Composites two days before
promised. Now need to get some servos for it. What's the hot setup these
days?
Thanks,
Fred
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note
- Original Message -
From: <[EMAIL PROTECTED]>
Would "Prettyman" be better? ;-)
It's the "Pretty" part that this manly man finds disturbing. How about
"Luchenbach Mantis" fuselage that is used to build a "Luchenbach Mantis" or
an "Aegea Mantis".
Phil
RCSE-List facilities provided by
The scale guys are using Banos on the 4 th Sunday this month, so it is best
if we stay away and give their space. Which means we will go this Sunday,
the forecast is good at this point and the practice is not being canceled.
We will go and fly.
juju
RCSE-List facilities provided by Model Ai
I've dealt with Kennedy Composites before, and it was a bit frustrating due
to lack of communication. For a while, having never dealt with Barry, I
thought I had been burned. None the less Barry finally did come thru on
everything. I think he works at a real job then tries to run the model
busin
Well, I ordered an Organic from Barry almost a month ago but I knew it
wasn't in stock. He then received them from Vladimir but some fuses
had a problem which he offered to ship me anyway so I could fix and
fly until a new one could be shipped without charges. I could then
keep both fuses.
Barry l
Gordy,
I decided to hold off buying the new Hobbico Frequency Checker until you
have had time to test it out around the country and write a review. I'll be
watching for it.
Brad
Tower has it for $55.
Actually tower doesn't 'have' it.
Mid May, but thanks for the link!
You all better get on the
If you are not subscribed directly to soaring@airage.com, and you post through
one of the other mirrors, e.g. RC Groups, you have to wait for the messages
to be approved for them to be delivered to RCSE. Part of how RCSE keeps
to a low SPAM level, we can all generate enough drivel without the hel
Funny, Ive never had any trouble with Sal.
Walter
-Original Message-
From: Craig D. Allen <[EMAIL PROTECTED]>
To: soaring@airage.com
Date: Friday, April 15, 2005 9:16 AM
Subject: Re: [RCSE] "Barry Kennedy Vrs Others..a personal experience"
>
>
>
>APERANTLY YOU HAVE NOT HAD DEALT WIITH SA
Once again, I don't know how this is getting pushed to the soaring exchange
several days after it was deleted from RCGroups. I have squared things up
with Barry, and am continuing to do business with him. He went through a
period of unresponsiveness due to the demands of the Toledo show and a cru
First of all, I don't understand why this message is getting pushed to the
exchange now, when I deleted it several days ago. Since then, a lot has
happened.
When I wrote this message last week, I was quite frustrated about not being
able to get in touch with Barry after numerous attempts on my pa
Would "Prettyman" be better? ;-)
John
>
> From: "Phil Barnes" <[EMAIL PROTECTED]>
> Date: 2005/04/15 Fri PM 01:53:46 EDT
> To:
> Subject: Re: [RCSE] Pretty Mantis Fuse Kit
>
>
> - Original Message -
> From: "Dan Ahearn" <[EMAIL PROTECTED]>
>
>
> > Guys where can I get one of Terry'
[EMAIL PROTECTED]
Did you know that when someone tries to reply to this address it
bounces? Likely why Barry hasn't reached you.
Gordy :-)
Title: Message
Since I don't have admin
access to Barry's site the link below will take you to the page for all the
updates.
Hope to have this updated by late tonight.
Also, if you want, you can
direct emails to me at the address below as I think Barry is inundated with
emails and may not
Tower has it for $55.
Actually tower doesn't 'have'
it.
Mid May, but thanks for the link! You all
better get on the listI still maintain that every rc modeler will own one
and it will be the first thing turned on climbing out of your car at the
field. AND ever club will have one on
I am sorry I open this thread up.
I can attest to Barry being a stand up gentleman.
I just spoke with Barry
I offered to help him with the communications side of his business.
He told me that hopefully he can have a list of open orders that he will
send to me to post on my club's website. That wa
- Original Message -
From: "Dan Ahearn" <[EMAIL PROTECTED]>
Guys where can I get one of Terry's kits?
I'll tell you but you have to promise to stop calling it the "Pretty
mantis". All you need to do is send Terry an email;
[EMAIL PROTECTED]
Phil
RCSE-List facilities provided by Model
Picolario sold pending funds
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as H
Not any more. AMA Competition Regulations, GENERAL section, Paragraph 4,
Model Identification, says "All models, except indoor, will be identified
with the owner's name and address or AMA number on the model." So you can
use your name and address instead of the AMA number and the number no
l
From: "stewswanson_2000" <[EMAIL PROTECTED]>
> > Still a rule- 1" numbers on right wing.>
Stew
From: "JohnC" <[EMAIL PROTECTED]> > The Rule
that I remember The AMA number was to be on the right wing and> I think
at least 1 inch numbers.>
What rule are you gents talking about? I see no
On Thu, Apr 14, 2005 at 02:48:56PM -0700, Bill Swingle wrote:
| I just tried to buy another GWS Lite Stick but can't find it anymore. The
| last one I bought cost only 29$ and weighed ~5 ounces RTF. Now I want to
| replace it.
Try the Pico Stick.
http://www2.towerhobbies.com/cgi-bin/wti0001p?
Hi Alberto!
Al
Look forward to seeing you .. I'll be arriving on Thursday.
Take care.
Al
Albert E. Wedworth ( AL )
ERA Capshaw Realestate
REALTOR- ASSOCIATE
Cell 530-228-9445
Fax 530-343-1715
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Data
HMmmm. could a pattern be developing?
- Original Message -
From: bwanajim
To: soaring@airage.com
Sent: Sunday, April 10, 2005 10:35
PM
Subject: [RCSE] Re: Barry Kennedy
Could you please tell me how you got in touch with
Barry? What is thebest time t
still available
--
addiction man
addiction man's Profile:
http://www.rcgroups.com/forums/member.php?action=getinfo&userid=60838
View this thread: http://www.rcgroups.com/forums/showthread.php?threadid=305615
RCSE-List fa
I have tried the Smiley on a Futaba 8U on 50MHz. I got significant
glitching even at short range. I never got around to re-testing it on
72MHz. I did just now (4/14) contact Smiley asking if the regular
antenna was acceptable for use on 50 MHz. I really would like to get
rid of that long telescope
have an Organic kicking around? a topaz danny or ava...something else?
Mantis?
I'm looking!
--
rand24
rand24's Profile:
http://www.rcgroups.com/forums/member.php?action=getinfo&userid=26646
View this thread: http://www.
Aircraft Version. New Battery. Great condition. Module included. No
servos or receiver.
$450 plus shipping.
Thanks,
Ben Lawless
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscri
Jim:
We can help,
rgds,
Alberto
www.hobbyclub.com
- Original Message -
From: "Jim Laurel" <[EMAIL PROTECTED]>
To:
Sent: Monday, April 11, 2005 11:54 PM
Subject: [RCSE] Best place to purchase Volz servos?
I am considering these for a Tragi 705X and Pike I'm building. Where's the
best p
Tower has it for $55. The external antenna is another $9.
Hobbico 72 MHZ Radio Frequency Checker HCAP0340
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXJUP2&P=7
External Antenna
http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXKHV4&P=V
--
fredt
--
As the subject says, anyone have one in good condition for sale?
Thanks
--
[EMAIL PROTECTED]
[EMAIL PROTECTED]'s Profile:
http://www.rcgroups.com/forums/member.php?action=getinfo&userid=61252
View this thread: http://www
Michael Lachowski Wrote:
> I guess Barry is filling in for Sal these days.
> That is a low blow.
> Charlie
--
CHARLIE BRITT 7
construction, pilot-multieng -seaplane, lifetime modler LSF level 4
CHARLIE BRITT 7's Profile
The great thing about numbers is that if you torture them enough, they'll give
you any answer you want...
Jim (statistically challenged)
--- Jim Deck <[EMAIL PROTECTED]> wrote:
> Mr. Chan,
> Your statement:
> "What math? All statistians pull numbers out of the air. A liitle more
> scienticfic
Barry is a GOOD guy, just not perfect.
Charlie :p
--
CHARLIE BRITT 7
construction, pilot-multieng -seaplane, lifetime modler LSF level 4
CHARLIE BRITT 7's Profile:
http://www.rcgroups.com/forums/member.php?action=getinf
The Rule that I remember The AMA number was to be on the right wing and
I think at least 1 inch numbers.
John F. Clarke
AMA 9473
--
JohnC
JohnC's Profile:
http://www.rcgroups.com/forums/member.php?action=getinfo&userid
Had a low AMA number untill leaving the hobby for a few years while in
the military/college. Rejoined around 1980. Old number was not
available.
Now I have AMA 10042. Good as any.
--
mode1
mode1's Profile:
http://www
Still a rule- 1" numbers on right wing.
Stew
--- In [EMAIL PROTECTED], Bill Johns <[EMAIL PROTECTED]> wrote:
> At 02:14 AM 4/10/2005, you wrote:
> >I wonder out loud whether numbers actually have merit...
>
> I seem to recall (it was a long time ago) that planes that were
destine to
> compete
Guys where can I get one of Terry's kits?
Dan
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web ba
The issue with Barry is that he has been making lots of promises,
with specific delivery dates, on his two hottest products and
missing those dates repeatedly to the same customers.Perhaps those
of you who know Barry better/longer haven't had the experiences that
others are having if you haven
I can sympathize with some of the stories here. I placed an order with
Kennedy Composites on March 1st. At that time, Barry told me that all
the items I ordered were in stock. He gave me a total and an hour
later, I sent him $245 via PayPal. To date, I have not yet received my
order.
Starting
In a message dated 4/9/2005 7:56:00 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
I am just curious whetheranyone has a clue what the numbers where running in 1958
I got my AMA in 1960, it was 5 digits, 34XXX, but let it drop in favor of raising kids, flying & building fullsize power and
Hello Bill & Al:
A group of us from the Aliso Viejo area (So. California),
will be coming up with an electro tug powered by an
Actro 40-5 brush-sensorless motor.
We've been locally towing gliders up to 4m wingspan
with a lot of success,
regards,
Alberto
www.hobbyclub.com
- Original Message
The AMA policy of reusing old AMA #'s just plane sucks!
Is nothing sacred anymore???
It is totally disrespectful to reuse the AMA # of someone who loved
and participated in the early days of this hobby but has since passed
away or is out of the hobby for one reason or another.
Those who take so
APERANTLY YOU HAVE NOT HAD DEALT WIITH SAL :-
Craig Allen
LSF 111
--- In [EMAIL PROTECTED], "Tuan Le" <[EMAIL PROTECTED]> wrote:
> I got quite a bit of flack for posting this as I know many are
Barry's
> friends.
> I was not intending to do anything more than get a response from
[EMAIL PROTECTED] Wrote:
> >Doug McLauren wrote:
>
> >What is it with people taking private emails and replying to them to
> >the list?
>
> Sorry, but if you leave the "[RCSE]" subject unchanged, my email
> program will
> list it along with all the other RCSE emails as a part of the relevant
>
Dan Ashenfelter wrote:
> If you are still looking for a TGW Goblin, I have one NIB that I might
> be willing to part with
>
> Dan Ashenfelter
>
Dan I am interested in your offer, I mailed you offline, did you receive
my message ?
Chris
RCSE-List facilities provided by Model Airplane News. Sen
Is this the sailplane version?
Whats the highest bid so far?
--
JDubman
JDubman's Profile:
http://www.rcgroups.com/forums/member.php?action=getinfo&userid=14191
View this thread: http://www.rcgroups.com/forums/showthread
A big CONGRATULATIONS to Robin McGowan
finishing 1st place in Juniors and second overall by 15
points behind the winner at the recent Fresno Classic.
She was proudly flying her "Danny" among a group of
very talented adults,
rgds,
Alberto
- Original Message -
From: "George L Meyers" <[EMAIL
Mark, I think TMSS has a contest this weekend but Bill's web site is not
current. Please tell me who I should contact for information. Thanks,
Regis
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscrib
We will, we will. Care to carve a quarter scale fuse plug for us John? Abigail is definatley a beaut and a hot rod of Schweizers.
Hey I've been a busy man. I am finishing the 1-23 and 2-32 fuse plugs and laser cut woodie kits first. In the next week or so we will have prototypes and first article
A big CONGRATULATIONS to Robin McGowan
finishing 1st place in Juniors and second overall by 15
points behind the winner at the recent Fresno Classic.
She was proudly flying her "Danny" among a group of
very talented adults,
rgds,
Alberto
www.hobbyclub.com
RCSE-List facilities provided by Model Airp
I have a new, never used, Picolario for sale. The earphone and walkie
talkie are included. A new setup will set you back $436 including shipping.
I will sell this one for $350 and I will pay the shipping.
Steve Gibson
Houston, TX
RCSE-List facilities provided by Model Airplane News. Send "sub
I have to comment. My MPX 3030 is getting a tad bit old now (~4yrs) and may
now be out of production. Yet, it was reasonably priced when I got it at
$380. It shares files with my PC. It's easy to program (you ought to see all
the dust on my manual!). It can do all the mixing 90% of modelers need.
R
Group,
I have a customer who is looking for some small parts off a Graphite wing.
Does any one have a badly damaged Graphite d-box wing that can be scavenged
for parts?
Please reply off line ...
Best Regards,
Barry Kennedy
Kennedy Composites
www.kennedycomposites.com
1935 Highvalley Trail
> No matter
> how you look at it, there can be no rational justification for that
> dumb interface.
Marketing???
IF they put a serial port on it or a USB port on it, they cant sell you an
adapter!!
sounds like justification to me ???
Richard Reynolds
[EMAIL PROTECTED]
RCSE-List facilities prov
75 matches
Mail list logo