[RCSE] Jim's Bags

Looking for current email/web site TIA Stan

[RCSE] Assembly Cradle

Looking for plans that will allow me to assemble my sailplane w/o having to sit/knee on the ground(Arthur has visited me). I remember sometime back someone had something that that had a stake of some time driven into the ground and the cradle perched on top end of the stake. I'm flying both 2 and 3

[RCSE] Looking for scale sailplane

I have a friend of mine that is looking for a scale 4-5 meter plane. Trying to keep the cost to around $500. Any suggestions other than the "Chinese Specials"? TIA Stan

[RCSE] What Am I building building this winter

Grand Esprit, best looking nostalgia plane out there. Stan

[RCSE] Looking for source wing rods

I need a wing rod 11/32" diameter with a prebent 8* dihedral. 12 3/4" overall length. Stan

[RCSE] Comments about balsa from "N"

Earlier someone complained about his wood from "N", I didn't experience the same problem. But I do miss Lone Star I just received a $50+ order and I was satisfied with the wood. I ordered some contest grade with std grade and all the contest was 4-6 #'s and the std stuff was pretty good with a co

[RCSE] Looking for a Berg 7ch receiver....

Who has some good "deals" on them? THX Stan

[RCSE] Looking for Dale Nutter's email address

Thx

[RCSE] Looking for Dale Nutter's email address

Any help out there? Stan

[RCSE] ? about Solenoid s for winch

We have an old winch in our club that has a single solenoid. It's been in storage for several years and a new group of guys in the club want to use it. Not being winch literate, are two solenoids necessary? Are they wired parallel? TIA Stan RCSE-List facilities provided by Model Airplane News

[RCSE] OT: Can anything be done with "frosted" headlight covers?

My headlights on 98 Audi A6 are almost completely frosted. Any help out there? Thanks Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only form

[RCSE] What is Johnny Berlin's e mail address

I just lost my dog, and feel his pain. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web ba

[RCSE] Supra ? Who couples flaps to ailerons?

If so, how much? If not, when/why? Thanks Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from we

[RCSE] Good guy report----George Voss

Placed an order and was shipped next day, competitive priced Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

[RCSE] Smiley or similiar antenna for 9303

Looking for source of this type of antenna for my 9303 TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. E

[RCSE] For you S.Cal fliers in and near Costa Mesa

I saw a post on RCGroups about no more thermal flying at H.S.S. Haven't lived in S.Cal in almost 40 years, but back in the early to mid 60's I use to go to an area called "Back Bay" as I recall. This was a fairly small peninsula that had a west facing cliff. I used to go there on Sunday aft

[RCSE] Went Supra flying today

Took it out for the first time today in 8-10mph winds. Launched with my monster hi-start but only needed 25# to go straight up. This is my third aileron ship. First was an Artemis and second Tempest. This plane flies like a trainer. Very little thermal activity but got one flight of 14min+ by k

[RCSE] First Plane....Windfree

About 1972. I built it didn't know a thing about monokote went to a buddy in SE Arkansas by name of Frank Jackson. Frank and a buddy of his from Mississippi covered my plane and Frank loaned me an old(even then) Orbit with elevator on right and rudder on left stick. Servos would barely fit in t

[RCSE] Supra ready to fly

Came in at 65.5 oz, took 3.5 oz of nose weight. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent fr

[RCSE] Can one use a copper wire for an antenna

I'm looking to install a wire in wing for an antenna. Can I use a very thin copper wire for an antenna? TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be

[RCSE] Good Guy report Barry Kennedy

Called Barry up, lost my fastener that holds the stab on the pedestal on my Supra. Apparently I'm not the only one to lose one, as Barry was out of them. I tried locally to find a replacement at bike shops but no luck. Called Barry back and he said he would take one of his personal planes and

[RCSE] Need info running rx antenna down wing on a Supra

I'm putting together a Supra, somewhere,sometime,someone mentioned running the rx wire down the wing at the flap joint. am I dreaming. If not, details please. TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Plea

[RCSE] Supra rx antenna, running it parallel down wing(Posssible dup request)

I'm putting together a Supra, somewhere,sometime,someone mentioned running the rx wire down the wing at the flap joint. am I dreaming. If not, details please. TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Plea

[RCSE] Looking for fastner the holds stab on pedestal on Supra or Ava

Lost mine. Getting one from Ukraine not not a likely prospect. Will entertain alternate methods of holding the stab with local available parts. Surely I'm not the only one that lost that aluminum fastener. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsub

[RCSE] Good source for AA battiers(fresh and reliable)

Looking for a reasonable priced source. THX Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from

[RCSE] Supra ? Mine weighs 61.75 oz prior to balance. How does this compare with yours?

And how much weight did you have to put in to balance? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email

[RCSE] Who is it that is keeping up with Supra weights?

I lost all my saved emails. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email

[RCSE] Receive my Supra today #91

Very nicely done, will start on it Saturday Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from w

[RCSE] Looking for the pdf file that Sherman Knight wrote on the 9303

TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL

[RCSE] EV)O 9 SOLD

Thanks for the bandwidth RCSE. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based emai

Re: [RCSE] Robert L Scott

Chuck: You spoil us, great story. I can imagine you were thrilled to meet him and have autograph of this great American. Stan Chuck Anderson wrote: Tonight, I found that Robert L. Scott, the author of God Is My Copilot, just died. He was one of my heros that I got to meet, even if only for

Re: [RCSE] Heat shrink

George, I bought about $10.00 of HS on eBay,must have got 20+' of the stuff ranging from 4" wide down to 3/32ID. Small stuff 3/8 and under was ok but the wider stuff 3" and 4" stuff was "nix so goot". Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsub

[RCSE] Misc joiners 4 sale. Also left wing for Tempest LT

Have carbon tip joiners for Artemis " center joiner for Tempest Have pristine left wing for Tempest LT(the only thing that survived when my Tempest came to an abrupt stop with mother earth. Make me any offer, I have no idea of value. Stan RCSE-List facilities provided by Model Airplane New

Re: [RCSE] "Supra's -- contests in choas!"

Gordy, Well, I'm glad to see some humor coming from your corner. I'll betcha my tail boom will weigh less than your tailboom. Stan [EMAIL PROTECTED] wrote: Here's the thing guys. The entry of the Supra spells the end of our hobby in a lot of ways and is going to cause all sorts of chaos in

[RCSE] You think a variometer is too much.......what about this?

We have a guy that has a 6m Nimbus with an electric motor that has besides a talking variometer also has a gps in his plane that will bring his plane back to the launch point in event he loses orientation. Now, that's a gadget. Stan RCSE-List facilities provided by Model Airplane News. Send

Re: [RCSE] Molded Supra #34

James V. Bacus wrote: I received a SportTube full of goodies today from Barry Kennedy! 8-) http://www.jimbacus.net/soaring/Supra/Supra34a.jpg I Slid it open to see this... http://www.jimbacus.net/soaring/Supra/Supra34b.jpg http://www.jimbacus.net/soaring/Supra/Supra34c.jpg What a disappointme

[RCSE] Anyone out there recall where the c/g is on a Windfree?

Can't believe it,but misplaced my plans. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web

[RCSE] Ref: Rick Hallett

Guys: I just talked to Rick's daughter and found out that Rick has a serious health problem. His health prohibits him from answering his e-mails. A card of encouragement would be greatly appreciated by him and his family. I'm going to post on rcgroups as well, if you know of another list that

[RCSE] Looking for pix's of your Supra

Looking for pix's of your Supra. I'm on cable so size of file no problem. Thanks Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format wi

[RCSE] Mark Wales.........would you ping me?

Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are

[RCSE] Anybody hear what happened to the "MoreGlue" site?

Thanks RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL ar

[RCSE] Anybody heard how Rick Hallet of Maine is doing? He is a "good guy"

I've called a couple of times this week, but no answer. He has spent many hours helping me program my Evo(slow learner). Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe

[RCSE] Source for multiplex connectors

Looking for source to order multiplex servo connectors TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

[RCSE] 4 Sail or is it Four Sale.......Left wing and both stabs for Tempest

Wing is lime with yellow and purple swish with purple underside. It is 99%(no dings or creases,or scratches) One stab(matching color) is 100% the other has a crease. $200 for all plus ship. A new wing is $300+. Have pix of plane if you want to see colors. Also have joiner rod that I will sel

[RCSE] Looking for a fuse that lend itself to electric power

I broke my fuse beyond repair. Looking for a fuse that will accept bolt on 3piece wing. If you have something that will work, email me details. Thanks Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that

[RCSE] Need light weight hi-start

Looking for a used but serviceable used hi-start for <30oz sailplane. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turn

[RCSE] Anybody use torque system for spoiler return?

If so what success/failure did you experience. How did you do it? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned o

[RCSE] Good guy report....Ray Hayes of Skybench

I purchase a kit from Ray and received prompt delivery. When I opened the kit all the metal hardware was missing. I emailed Ray and he promptly responded to my email saying he would take the hardware from a kit in stock and mail it to me. Any better service than that? Instead of making excu

[RCSE] carbon or aluminum 6* wing rod needed

Going to be building a Windfree want to substitute the 2 5/32 rods with one main rod. Need 6* for each side. Any help out there? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscri

[RCSE] Windfree, who is kitting this model?

Thanks RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are

[RCSE] Who supports( US made) their molded gliders?

I have a left coast made open class and I can't even get the mfg'r to respond to my e mails, wonder how fast I can get parts? Anybody care to guess? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that s

[RCSE] Paging D O Darnell

Would you ping me. Need info on your Discus Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from w

[RCSE] Kudo's to Craig Greening of Servoframes

Recently George Voss did some installation of Craigs servo mounts for me. There was a mix up as to how I was going to be billed between Craig,George and myself. Anyway to make a short story even shorter. I contacted Craig to make payment and he was gracious enough to tell me to forget about th

[RCSE] Anyone need an Artemis canopy?

I have an Artemis canopy for someone. All your out is shipping and what you this is fair. I'm not going to put a price on it. First one that responds has it. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please no

Re: [RCSE] The best soaring hat?

George, Here is the site for the hat I was trying to describe to you earlier. http://www.ultimate-hats.com/caps.html Stan George Voss wrote: I know this will start a huge discussion, but what is the best hat for both slope and thermal flying? I currently use a Chi Chi Rodriguez cane hat. I l

[RCSE] Flight characteristics of MH32

I've purchased an xtail 128" MH32 sailplane. I have the throws for it, but have no idea of how the MH32 behaves. 1. Does it like flaps/ailerons droop on launch, details please 2. Landing flaps/crow? 3. Thermaling, some flaps/ailerons 4. Speed, + flaps/aileron? Many thanks, really don't want to

[RCSE] ForSale 8103 Channel 38

Excellent condition. Std antenna,"Smiley" antenna, JR neck strap, low hours. DSC cord and almost new 1500ma NiMh battery. Just pealed the protective covering off front face plate. Will ship in plastic padded case that I used for carrying around. Pix on eBay item # 5976114238 $225 shipped to co

[RCSE] Looking for Dale Nutters email address.

TIA RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are gen

[RCSE] Grand Esprit.......does it need ruddervator Differential?

Getting the G.E. ready for spring, changing transmitters as well. Can someone help me with the ruddervater throws? How much up/down? How about differential? TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please

[RCSE] test

. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are gener

[RCSE] Pleasant experience dealing with George Voss

I have just recently dealt with George. I purchased a "Tempest" from him and had him wire up the "electronics" of the plane as well as doing some addition work on the model for me. I found his workmanship paid attention to details. I just wanted to let you guys/gals out there that I had a very

[RCSE] Tx case

Lowe's has a nice aluminum case for $24 that will hold 2 transmitters. It has a "egg crate" in the lid and full foam that is already precut in 3/8"(approx) squares that allow you to shape the area to recess your tx case. Stan RCSE-List facilities provided by Model Airplane News. Send "subscrib

[RCSE] Hobby Horse purchase with a good experience

A week or so back I asked about the "Hobby Horse". I didn't do a survey of results, but it seemed more favorable than un. I just bought an Evo 9 with scanner for $512.99 shipped from them. They got it out the next day with a complementary bottle of CA. Couldn't have been more pleased with servi

[RCSE] Looking for a site where "gel cell" batteries are sold

I have what is supposed to be a regulated 12vDC power supply. I'm currently using it with a 12v garden tractor battery to supply power to my Triton charger. Would like to find a place where I can buy a competitively priced gel cell. Any help out there? Stan RCSE-List facilities provided by Model

[RCSE] What gage wire is needed to run a lead for 45"?

Need to run a wire to a servo, what gage? Is std servo wire 24 gage? Will I need a choke for this long run? TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must b

[RCSE] Size of carbon fiber rod needed?

Want to use carbon fiber rod for tips on BofT 3pcs wing. What size rod/tube will I need to support the tips? TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages mus

[RCSE] Any experience with "Hobby Horse"?

Seem to have competitive prices Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email

[RCSE] Looking for help on programing Evo 9 radio

I'm going to be purchasing an Evo 9. As I try to learn programing, who out there would volunteer to give me help as I need it? I'll try not to abuse you. Any other tutorials besides Joedy's? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests

[Fwd: RE: [RCSE] "Barry Kennedy Vrs Others..a personal experience"]

Need anything else be said. 54540 Stan Original Message Subject: RE: [RCSE] "Barry Kennedy Vrs Others..a personal experience" Date: Sat, 09 Apr 2005 06:18:20 -0500 From: Chuck Anderson <[EMAIL PROTECTED]> To: soaring@airage.com At 02:39 AM 4/9/2005, you wrote: And to the bone head

[RCSE] Where is best source for Stylus transmitter?

TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL ar

Re: [RCSE] FMA Skysprite is a hoot!

Looks suspiciously like a free flight electric that Harbor Freight was selling. Stan [EMAIL PROTECTED] wrote: NEW! Great looking RTF, 14 3/8" wing span, includes 27 MHz radio transmitter and receiver, unique ducted fan left/right control, and throttle on/off. Flies great! Great value! _

[RCSE] 8103 programing problem flaps to ailerons then to crow

Is there a way to program the ailerons to the flaps for first 50% of travel, then the ailerons go neutral and then to "crow" as addition flap is dialed in? TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please no

[RCSE] Anybody have Rich Hollyday's e mail address?

I've found his old web site but no email address. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent fr

[RCSE] ATTN: Sharon 3.7 x-tail owners, need input

Had all but decided on Tempest when the water got muddy. Someone(read Edgar "Soaring Junkie") suggested I consider the Sharon. So, I'm asking for input. Probably the main criteria I have is that it be able to hi-start. I do not have a winch readily available to me(and the club winch has seen

[RCSE] Need feed back from you Tempest flyers or those who have seen one fly.

I've struck a deal with George Voss on a Tempest. I'm not having buyers remorse, but have never spent that much $$$ on a "toy airplane". Perhaps reassurance is what I'm looking for. TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [E

[RCSE] Still looking for an Artemis center section.

Any help out there? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotma

[RCSE] Parting out a Artemis V

I have an Artemis that I would like to part out. The fuse is white with or without 141's. @ 90% of new(just some light scuff marks on bottom) V tail is red bottoms with yellow/white/red tops @ 100% Tips red bottoms with yellow/white/red with 85mg's @100% Would prefer to sell at a lot, but would e

[RCSE] Talk about turbulance

This bird had just landed. Pix was taken just seconds after landing. Look at all those ruffled feathers. Wish I could take credit for the pix. _http://mywebpages.comcast.net/stanmyers/birdlanding.jpg_ Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe"

[RCSE] First Plane

My first plane was in 1972, a Marks Model "Windfree" Self taught with that plane. Gained 6 oz's in weight from first to last flight. Any guesses why? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that

Re: [RCSE] Digital Still Camera - Reccommendations?

Nathan Woods wrote: Hey guys, a while back Pat McCleave asked for your digital camera recommendations, and got a lot of good advice. I'm looking for the same kind of help. I am technology friendly, so buttons and features are cool, not scary. I'm adept at PhotoShop, so post processing is taken ca

[RCSE] I've piggybacked on hawks/buzzards many a time, but last week I had one piggy back on me.

I had just cored a thermal about about 500-750' when a hawk, who was flying on a straight line to where I was, started a thermal turn under me and circled the same direction as I was turning but stayed under me. He made 4-5 turns and then took off on the same line that he was previously on. I

[RCSE] Had the Grand Espirt out this afternoon

Went out with the idea of shooting some landings using 50' of rubber and 250' of line. Some of the lift was so good had to go inverted to get down to where these old eyes felt comfortable. Shortest flight was 10min 28sec. I have a 700 ma battery pack in it and when I came home I discharged th

[RCSE] Need some help winding up my hi start.

I am currently using a Orange colored reel that can be found at Home Depot that was designed to be used to as a reel for outdoor electrical extensions. I wind the rubber up first to get a larger dia. hub to wind the nylon string up faster, but alas, its way too slow for this aging flyer. Any o

[RCSE] Artemis V-tail parts for sale

Have an Artemis for sale. Center section is BROKE but has 368's for the flaps. Tips are 100% with HG85'sMG. Vtail is 100%. Fuse is 95% with no fractures has a ballast tube. Fuse has 141's and a 1200 NiMh in nose. No receiver. $500 plus shipping. Pic is before my modification. Might consider tra

[RCSE] Digital Camera's: there is a way around shutter lag.

I have a Minolta D7ug,but all you need is a digital camera that allows you to got to "Manual" mode. Set your shutter speed to "250", distance to "infinity", and of course the "f-stop". By doing this shutter lag is almost non-existent. Stan RCSE-List facilities provided by Model Airplane News.

[RCSE] Model Builder Magazines for sale

I have approximately 85 magazines from 1972 to 1980 that I don't want to move. Anybody interested? Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in te

[RCSE] Looking for center section for Artemis

Mine fractured on hard landing between the hold down bolts. Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

[RCSE] Flaps servos are stalling when in flap stick is in full up"0" flap position.

When in move the flap stick just one notch the servos stop stalling. I have a 8103. How do I adj to get the stall out? Many thanks Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubsc

Re: [RCSE] CG on Grand Espirt

Dave, many thanks. I'm an old duffer(68) and would gladly accept metric. Seems so easy to be able to divide by 100 Stan [EMAIL PROTECTED] wrote: According to the original plans of the Grand Esprit that I am holding, the CG is 15.3 inches or 389.62 mm, (being the bi dimensional person I am), bac

[RCSE] Graphite wing joiners needed

A buddy of mine is going to build a BoT with three piece wing. Wants to use graphite wing joiner and tubes. Where can he get them? TIA Stan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and uns

[RCSE] Looking for fuse for 3meter(with shoulder mount). To electrify

I have a 3 piece 3 meter wing with a 7037 airfoil that I would like to electrify. Fuse that came with the wings is wy to small for motor/batteries.   Stan

[RCSE] Can a "bagged" wing be covered with "film"

I have a bagged wing that I bought several years ago than I need to finish. I had orginally intended to paint the ship, but circumstances now dictate otherwise.  I have it primed and no longer have access to painting equipment other than cans.   I just can't imagine painting an open class shi

Re: [RCSE] Re: Converter?

Ray, I got a 60watt at RS for around $30. B est Buy about the same as is Wally World. Good enough for a laptop. Stan - Original Message - From: "raymond juschkus" <[EMAIL PROTECTED]> To: "RCSE Post" <[EMAIL PROTECTED]> Sent: Saturday, January 03, 2004 7:25 PM Subject: [RCSE] Re: Converte

Re: [RCSE] Hi-Start HELP

Mark: I have used your 3 meter rubber on my BoT w/o any problems extending rubber 3x original length. I made mine a 3piece wing. Center section has a full hardrock maple joiner going three bays on either side of the center line. Also used 3/4oz glass cloth on the sheeting 3 or 4 bays on each si

[RCSE] Mixing TX & receivers

Local hobby shop owner suggested I confirm it was ok to mix JR tx with Airtronics receiver. Anyone have any problems doing this? TIA Stan All outgoing email is virus scanned by Norton RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL P

[RCSE] Will 3M clear tape do any damage to a molded wing?

I recently purchased a used molded sailplane the previous owner had taped the wing surfaces at the tip-main panel junction. Is this tape to protect the surface when applying tape to hold the tips to the center panel? Stan All outgoing email is virus scanned by Norton RCSE-List facilities provided

[RCSE] Repairing a tail boom, need input

I broke my tail boom on a hard landing. The complete break was about 1/2 way back. Need suggestion on how to repair. I was thinking of putting in a 1/64th ply tube epoxying that in mating the two pieces of the boom, then using glass on the exterior. If the ply tube is a good idea, how long would

[RCSE] Web site for figuring wing area

Some time back someone posted a web site that allowed figuring wing area on a multi tapered wing. Thought I had it on "My favorites" but no. TIA Stan All outgoing email is virus scanned by Norton RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests

[RCSE] programing 8103 differential ailerons

I'm new to 8103 programming. The manual says you can use two different methods for aileron differential. End point and differential. Which one do you use and why? Stan All outgoing email is virus scanned by Norton RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "uns

Re: [RCSE] Folding props?

Yes to folding props on .049's.  I've got a buddy that is into 1/2A freeflight and uses them. Not cheap, but what is these days. - Original Message - From: Ryan Flowers To: RCSE Sent: Wednesday, February 26, 2003 3:09 PM Subject: [RCSE] Folding props? I'm on

  1   2   >