On Wed, Jul 15, 2009 at 4:55 PM, Hendrickson, Kenneth
khend...@harris.comwrote:
I have a net5501 with a Seagate Momentus 5400.5 hard disk which is
only (reliably) recognised by the comBIOS if I limit the drive to
1.5Gbps SATA via a jumper setting. Maybe there's a similar issue with
your
On Wed, Jul 15, 2009 at 5:32 PM, Hendrickson, Kenneth
khend...@harris.comwrote:
comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris
Engineering.
I also have version 1.33.
Pri Mas FUJITSU MHT2080BH LBA Xlt 1024-255-63 78 Gbyte
Pri Sla SanDisk SDCFH2-004G
its currently booting from a 80GB partition covering the whole disk... im
running netbsd 4.2
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
just below the:
0512 Mbyte MemoryCPU Geode LX 500 Mhz
is detected drives listed, the bios does not detect the drive at all, are
you sure that you've connected it correctly, and that the drive works ?
loppefaaret
On Wed, Oct 27, 2010 at 1:54 AM, Randy Bush ra
interrupt the bios, boot f0
that should initiate a pxe boot on eth0
im guessing you had the CF card conncted to another PC to format it? you
have to make sure that both the formatting PC and the soekris sees that same
values for C/H/S ei:
Pri Mas SanDisk SDCFH-008G LBA Xlt
could someone link to the pics ?
2011/4/1 Marco A. Calamari marc...@dada.it
On Thu, 2011-03-31 at 17:06 -0700, Soren Kristensen wrote:
Hi Everybody,
I now have prototypes in my hand of the new net6501, and there are
pretty pictures up on the soekris website
I will be really
On Fri, Apr 8, 2011 at 12:26 PM, Bob Bishop r...@gid.co.uk wrote:
Hi,
On 8 Apr 2011, at 11:17, l.rine...@movimatica.com wrote:
With my Soekris net4801 i try to boot from a 2GB Flash with the 1.33 BIOS
setup as:
ConSpeed = 19200
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
you most likely wanna update the bios...
http://wiki.soekris.info/Updating_Bios
be aware though, that there is somekind of bug in the bios update
function.. so make sure to hard reset the device..
i believe 1.40h is the one you want, atleast last time i checked
2011/12/1 ΜΙΧΕΛΙΟΥΔΑΚΗΣ ΝΕΚΤΑΡΙΟΣ
noattime ? softdeps ? are u working inside the filesystem ? try working
directly on the device instead ?
although working directly on the devices, writing anything will render the
data unusable... if ur looking for read perfomance testing, try hdparm -tT
/dev/sd# or whatever Obsd uses
On Thu,
the installer re-DHCP)
On Wed, Mar 20, 2013 at 1:04 PM, Andris Berzins p...@inbox.lv wrote:
Very interesting. Mind to share how you got it running?
Did you upgraded from 10.04?
Which grub version are you running?
Quoting loppefaaret loppefaa...@gmail.com:
srvadm@soe5501:~$ uname -a
Linux
srvadm@soe:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 10
model name : Geode(TM) Integrated Processor by AMD PCS
stepping: 2
microcode : 0x8b
cpu MHz : 499.905
cache size : 128 KB
fdiv_bug: no
Back when i tried all that fancy stuff on my 5501, i also ran into all
sorts of trouble...
so i limited the involved functions;
i did not seed the base installer from my own httpd...
i did not use the ks.cfg...(unattended install)
i adjusted to only use 9600 baud rate all over
i just setup a
hey, some of us have bought multiple 5501's, and had them running for
3+ years, 24/7, some as just basic pfsense setup... others as home NAS
with 1tb disk... not a single failure on the board, or the PSU... and
apreciate Sørens feedback...
and i personally, though i might mix 3 of u guys up, are
i beleive there is a limit to the size of the booting partition on the 5501.
try seperating /boot on the first primary partition, with less than 2gb
if you haven't tried that already.
Den 18-06-2015 kl. 19:34 skrev andrew fabbro:
Revisiting this 5501-70...I subsequently got a new power supply
14 matches
Mail list logo
