hello can you tell me what frequencies it tunes and why you are celling?
Hank
- Original Message -
From: n1ccw gus.stu...@gmail.com
To: soft_radio@yahoogroups.com
Sent: Monday, May 03, 2010 7:38 AM
Subject: [soft_radio] For Sale: PMSDR
Hello,
I am selling my PMSDR. It is assembled,
Hi, everyone. I bought a new E-Mu 0202 one week ago. I'm a little
disappointed so far. I've written up my experience with it to date on my blog,
garage-shoppe.com, but it boils down to image rejection (that is, phase and
amplitude matching between the I and Q channels) which is inferior to
On 5/4/2010 2:06 PM, Peter wrote:
Hi, everyone. I bought a new E-Mu 0202 one week ago. I'm a little
disappointed so far. I've written up my experience with it to date on my blog,
garage-shoppe.com, but it boils down to image rejection (that is, phase and
amplitude matching between the I
Alberto-
Any chance you could post the contents of the message to this group? The
Winrad group is locked down unless you are a member.
-Ray WB6TPU
From: soft_radio@yahoogroups.com [mailto:soft_ra...@yahoogroups.com] On
Behalf Of Alberto I2PHD
Sent: Tuesday, May 04, 2010 10:44 AM
To:
On 5/4/2010 7:58 PM, Ray Anderson wrote:
Alberto-
Any chance you could post the contents of the message to this group?
The Winrad group is locked down unless you are a member.
-Ray WB6TPU
Ray,
yes, I forgot that you must be a member to access the archives of
that group.
Let me see if
Alberto -
Nice writeup!
One thing I would add. BEFORE using the software Image Rejection,
Fine Tune the GAIN balance by adjusting the Left Channel control for
best suppression.
Someone else, somewhere, suggested leaving the LEFT GAIN at minimum with
the RIGHT GAIN at 10 o'clock. I believe
On 5/4/2010 8:34 PM, Garey Barrell wrote:
One thing I would add. BEFORE using the software Image Rejection,
Fine Tune the GAIN balance by adjusting the Left Channel control for
best suppression.
Someone else, somewhere, suggested leaving the LEFT GAIN at minimum with
the RIGHT GAIN at 10
Hi group,
Would it not be feasible to design a way to perform this 'equalization'
automatically via software?
Regards,
Per-Tore
On 4 May 2010 22:20, Alberto I2PHD i2...@weaksignals.com wrote:
On 5/4/2010 8:34 PM, Garey Barrell wrote:
One thing I would add. BEFORE using the software