And changed the 128 to 320, also works:)
http://100komma7.cast.addradio.de/100komma7/live/mp3/320/stream.mp3
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
This works for me in the UK
http://100komma7.cast.addradio.de/100komma7/live/mp3/128/stream.mp3
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
Myself (and others) have experienced this behaviour with linstalling LMS
on an O2 Joggler.
This is my routine, if you want to try; remove the logitechmediaserver
(keeping the prefs and cache)
Code:
sudo apt remove logitechmediaserver
re-install
If you refresh the page again (when the dropdown is empty) does the
player then appear ?
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
I misremembered the perl version number, its 5.28 :o
https://forums.slimdevices.com/showthread.php?111348-Need-help-installing-on-Debian-10=957981=1#post957981
Ah, right, so LMS works but does not allow a connection.
So that means you can not configure LMS, is that correct ?
ronnie
I think you need either an earlier version of Perl for the 32 bit
bineries, or run a 64 bit version of Jessie
https://forums.slimdevices.com/showthread.php?103854-Logitech-Media-Server-Died-Restarting-DEBIAN-JESSIE
I have had the "died restarting" on 32 bit userland and I think that
binary
Crumbs !
33590
I had quite forgottten about the "Contoller"
Good spot Mr H
Thanks for the help
ronnie
+---+
|Filename: facepalm.png |
|Download:
All the reported MAC addresses correspond to the ones on the repective
player stickers, except for the Touch, which is not legible on the
sticker.
The Touch was not previously connected to the install, until this
morning.
Should I just download a different version of LMS and run that for a day
wilco :)
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=114042
___
Squeezecenter
I don't have any player with that MaAC address :(
I do notice though, that all my Squeezebox players, 2 Booms, 2 Radios
and one Touch have a MAC address that begins with 00:04:20
It seems to be a "ghost" :confused: or maybe one of yours, left in the
build :)
ronnie
My server log is flooded with
> Slim::Web::Cometd::handler (421) errorNeedsClient: 00:04:20:1b:d5:bb,
> status, -, 10, menu:menu, useContextMenu:1, subscribe:600
This is a new build on a rpi 4b (8GB) of
>
> Logitech Media Server Version: 8.1.2 - 1614180373 @ Wed Feb 24 18:38:57
> CET 2021
>
rik81h wrote:
> Much appreciated both of you, i have installed the plugin and apk and
> i'll see how i get on the next few days.
Add the Music and Artist information Plugin, to sweeten the deal :)
Man in a van's
Hey Steve, does this summary reflect your choices ?
Currently
raspberry pi, connected to Squeezebox, connected to amplifier,
connected to speakers
Preposed
raspberry pi, connected to Squeezebox, connected to Aiwa, connected
to speakers
or
Use the current set up in situ, and,
In another
In,out shakei it.:)
33557
ronnie
+---+
|Filename: in out.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=33557|
Steve, something like this
https://www.amazon.co.uk/UGREEN-Splitter-Controller-Connector-Gold-plated-Green/dp/B015PZ7QO2/ref=psdc_1338421031_t1_B000Q6LSVS?th=1
will let you use your phone (if it has a headphone connector) to play
into the Aiwa
It would also work from a raspberry pi AV Jack,
d6jg wrote:
> The LMS upnp interface wasnt ever developed more than at a very basic
> level. Im not aware of any upnp server that provides anywhere near what
> LMS does. Let me know if you ever find one
I'm not likely to find one, as I'm not looking :p
ronnie
rik81h wrote:
> Haha no problem, thank you all the same
>
> Just noticed you're a stokey too :)
Now, now, ... not everyone in Staffordshire is a "pothead" :rolleyes::p
When I were a yoof I used to go to "The Place" :cool: in Hanley
(long,long time ago).
ronnie
Ah well you have an advantage over me as I have no playlists :)
I don't know how to even make one, I mean I know how to select tracks
and playthem back, but I have never saved a playlist.
I either listen to a complete album or a radio station.
I have playlists in Spotify but they are all
I realise that I have done this A about T (what's new) :o:o:rolleyes:
But I deleted Philippe's plugin and everything is the same, playing
through my Radio from the LMS Albums (a long delay before playback
starts)
33517
33516
with Philippe's plugin
+---+
|Filename: philippe's bubble.png|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=33516|
Just added philippe's plugin
33515
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=113994
rik81h wrote:
> I use bubble on android for various things around the house, it picks up
> the LMS server of course but half the browse modes are missing such as
> playlists, album artists etc. am i missing something simple or is there
> a plugin that could help at all?
>
> Any advice
I know that this question has been asked before.
But I have had this working on a Raspberry PI OS and thought some folk
might be interested :)
https://www.raspberrypi.org/forums/viewtopic.php?f=38=297771=1824083#p1824083
ronnie
Antibubble wrote:
> Hi, I have been a very happy Touch users for years. Sadly no more. I now
> only have access to some vinyl !
>
> This year my QNAP upgraded itself - I had no idea that LMS was no longer
> supported by QNAP NAS. searching through older posts I have found links
> to software
RobbH wrote:
> I found that LMS would not work with the automatic mount points in the
> Media folder. It would allow me to enter a path to music files in the
> Media folder, but it would not use them. I could not even enter a path
> to a Playlists folder in Media.
>
> I had to create mount
tobal2 wrote:
> Hi, as requested by M. Herger in other topic, I start a new one with my
> doubts.
>
>
>
> LMS server (over picoreplayer) has a big warning for proper
> shutdown...is it means that I am going to setting everything again in
> case of power cut? I do not have an UPS.
> Is
jezbo wrote:
>
>
> NB. I may resort to PiCorePlayer eventually but want to try Raspbian
> first because I want to run Plex and Transmission as well as LMS, if
> possible.
>
>
I don't know if this is useful to you, I just spotted it whilst over on
the rpi forum
jezbo wrote:
> I'm new to Linux but have just received a Raspberry Pi 4 and put
> Raspbian on it. However I am having problems finding any instructions on
> installing LMS. I want to put this latest version on there but the only
> guides I found to install via wget seem to point to deb files
Heuer wrote:
> Only being used as a controller - no audio. I was wondering if there is
> any debugging log I can get running to trap what happens. Would I be
> better putting this on the Joggler Forum?
It won't hurt, but don't hold your breath :)
zordaz wrote:
> Is this bug already solved in other branches? Can't find it in the Git
> Commit log, it is rather awkward that you have to check for updates
> manually for updates via the plugin page.
working here
33274
33275
All tough, I have in the past, seen a similar reluctance for
I Have a LMS v 8.1.2 installed on a Windows 10 Pro Desktop.
I have played with Local Player a long time ago :( :o
Anyway...
I Installed Local Player and connected a USB headphone dac
33081
I downloaded a 32 bit Squeezelite from here
Some further details might help folk with their advice
which computer OS
which LMS version
which squeezelite version
Local Player is a bit outdated:(
ronnie
how is the "processor" connected to the computer and what is its
function ?
Man in a van wrote:
> Please give further details of your system, which computer OS and how
> you downloaded and installed LMS would be helpful :)
forgot to ask
Which computer ?
Man in a van's Profile
jazzi wrote:
>
>
> I am using ARM deb package.
>
> .
Please give further details of your system, which computer OS and how
you downloaded and installed LMS would be helpful :)
Man in a van's Profile:
MysteryMan99 wrote:
> Perfect!
>
> So , I will order:
> > > >
- Raspberry Pi 4 (2GB)
- Official Power Supply
- Case
> > >
>
> I have a spare SD card I can use already. Is there anything else I
> need?
>
> Also, is there a tutorial or thread that gives guidance on what I
I kept trying and managed to get one to play
32844
32845
ronnie
+---+
|Filename: server.log.zip |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=32845|
SteveLazer wrote:
> Hi folks! Recently began having problems with multiple podcasts from
> WNYC after recent server update (the update before current one I think).
> When selecting these podcasts, error message "failed to parse" is often
> displayed. Retrying several times often is successful
@mibigo
Have you tried either
Music
or
Media
as the Share name
and do you fill in the username and password ?
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
ralphy wrote:
> The CPAN buildme.sh script creates both i386-linux-thread-multi-64int
> and i486-linux-gnu-thread-multi-64int for my custom perl 5.28 and as
> well as the os installed 5.14 perl.
>
> I've been running LMS with both folders forever. I'm happy to clean up
> the image, however,
I tried this today
32789
and
32790
LMS starts but then dies.
ronnie
+---+
|Filename: arch2.png|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=32790|
Thanks very much Ralphy
I'll play over the weekend.
Stay safe
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=113550
ralphy wrote:
> Hey Ronnie,
>
> I have perl 5.28.1 modules for i386 if you'd like to try them.
>
> I built them on debian 7 32bit using an lms purpose built perl 5.28.
Well that is most kind of you Ralphy.
I'll willingly give the a try.
You'll have to tell me where to stick them :p (in the
Roland0 wrote:
> or you could simply install Debian (which raspberry pi desktop is based
> on and has a 64bit version). Or Ubuntu. Or Linux Mint. Or any other
> 64bit distro you like.
Well, If I remember correctly (which is getting a bit harder to do :() I
think I did try an Ubuntu (both
Roland0 wrote:
> I'd advise against running squeezeserver directly from the command line
> (unless you pass it all the parameters and run it as the same user the
> startup script does).
> A simpler method to write all it's output to a file is to edit
> squeezeboxserver_safe (usually found in
gordonb3 wrote:
> I mean, run it as a console app: `/usr/bin/perl slimserver.pl`. This
> will cause it to dump a load of information to the screen, including
> stuff that will never show up in the LMS log file.
Thanks :)
I had a try at this on Wednesday evening.
Sad to say I could not
gordonb3 wrote:
> Just run it from console (as root). It will tell you every thing that's
> wrong.
>
> Edit: well, a bit optimistic maybe. It will give you everything up to
> the first critical error, which you will then need to resolve somehow to
> find the next one, and then repeat, until it
Man in a van wrote:
> Thanks
>
> I still can't get the Shuttle to power on.
>
>
Well the shuttle powered up this morning (a faulty switch , I think,
maybe needs a clean :confused:)
ronnie
Man in
bpa wrote:
> IIRC you're running a service that doesn't work - you have to add to the
> file with the other command line option.
>
> The file shoudl be /etc/default/logitechmediaserver
>
> And you edit it and add the "--d_startup" option into the SLIMOPTIONS
> variable
>
> If no 32 bit
The OS can be run as a live usb stick (with persistance).
I popped in into a late 2012 Mac mini
Installed the LMS 8.1.1 amd.64.deb
and get the same results
Code:
squeezeboxserver_safe started.
Logitech Media Server died. Restarting.
We don't have 5.28 binaries for 32 bit. Did you get any error with 64
bit?
--
Michael
the same message on both
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
bpa wrote:
> Anything in server.log ?
> If no log could there be a permissions issue access LOG and Cache.
>
> Otherwise, try running LMS with the --d_startup command line option to
> see if loading a specific module is causing it to fail
Well The power supply might have failed as I can't
I have an old Shuttle XS35V3 computer,
>
> pi@raspberry:~ $ lscpu
> Architecture:x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> Address sizes: 36 bits physical, 48 bits virtual
> CPU(s): 4
> On-line CPU(s) list: 0-3
> Thread(s) per
Is this the download link ?
http://downloads.slimdevices.com/nightly/index.php?ver=8.1
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
And so; an update:
Yesterday I had a lot of problems with LMS v.8.1.0 on the Mac-mini.
Trying to play BBC 6 Radio proved impossible, lots of interruptions of
playback, long pauses before resumption (from the same point it stopped)
and eventually the LMS just stopped responding.:confused:
I
Well it worked :):)
> Logitech Media Server Version: 8.1.0 - 1608459382 @ Sun Dec 20 11:33:23
> CET 2020
>
> Hostname: ronnies-Mac-mini.local
>
> Server IP Address: 192.168.1.113
> Server HTTP Port Number: 9000
>
>
the_arm wrote:
> Hi Man in a van - it turns out I just did this exact thing a few days
> ago on my mac, which is currently running Mojave. I assume it's the
> exact same process. Since I've been mooching off the expertise of others
> in this forum for years now maybe I can a
Thanks the_arm! As this is nothing I've done in more than a year, I'm
happy to see somebody's fresh responses :-)
--
--
Michael
And so am I :), thanks to you also Michael
ronnie
Man in a van's Profile:
jritsval wrote:
> Hi all. Thanks for all work, especially Michael.
>
> The latest output led me to realize that a few files and folders had
> limited access. Since I am new to MacOS it took me a while to figure out
> how to change file mod. But after granting access to the log files LMS
>
Hi Michael, thanks for responding, I realise you are busy with lots of
stuff just lately :(
Doing stuff on a Mac normally involves a lot of google for me :confused:
so, here is Tony T's post:
> I tried that a day or so ago without success (found the same sites, and
> more, googling)
> (Note:
I have a late 2012 Mac-mini running a fresh install of High Sierra
I have LMS installed
> [Logitech Media Server Version: 8.1.0 - 1608447134 @ Sun Dec 20 08:03:35
> CET 2020
> Hostname: ronnies-Mac-mini.local
> Server IP Address: 192.168.1.113
> Server HTTP Port Number: 9000
> Operating
Enter
http://feeds.wnyc.org/onthemedia
into a browser and it connects
enter
https://feeds.wnyc.org/onthemedia
and it does not connect (invalid)
I suggest you clear the cache in LMS or wait for 30 minutes or so
Man
starwalt wrote:
> Thanks gang! Installed and enabled, and restarted server to boot. No
> dice yet. This is what the log says:
>
> >
Code:
> > [20-12-16 17:12:26.8032] Slim::Formats::XML::gotErrorViaHTTP (339)
Error: getting https://feeds.wnyc.org/onthemedia
>
Paul Webster wrote:
> Try adding the plugin called "Reliable" to your local LMS - and then
> going into Settings/Plugin/Reliable and enable it.
Does this work better than my suggestion > Reliablke Plugin ( :confused::):p
This link works for me, in the UK
http://feeds.wnyc.org/onthemedia
If you are using a local LMS, perhaps install the Reliablke Plugin (and
activate it)
Look in the server logs for any messages
Are you using mysqueezebox.com?
ronnie
Is this the one ?
32529
ronnie
+---+
|Filename: fehler fm.png|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=32529|
@SIXEYED
Which streaming quality have you selected?
>
> Please note that FLAC is only available to TIDAL
> HiFi users. AAC will automatically be used otherwise.
>
>
gstalnaker wrote:
> then might I suggest HiFiBerry:
>
> https://www.hifiberry.com/shop/#bundles
>
> They have bundles that include RPi, HiFiBerry audio card add-on, and
> case,
> and power supply. Select the item with RCA outs (if you use that) or
> digital outs (which is what I have, the
Pommes wrote:
>
>
> I tried with this command:
>
> scp -r /Downloads/CustomClockHelper
> tc@192.168.9.165:/usr/local/slimserver/Plugins/CustomClockHelper
>
> the plug-ins show up after restarting LMS, but after a reboot of the
> raspberry they disappear. Can anybody help please?
>
> Thank
@[/B][B]JELOCKWOOD
I think it might be time to update the system.
Windows 7 is dead and LMS v7.9.3 breathing poorly.:(
First try updating to LMS v 8.0.0
http://downloads.slimdevices.com/LogitechMediaServer_v8.0.0/
Consider getting a raspberry pi and installing LMS on that (version
8.0.1).
hankhsucc wrote:
>
>
> What I am asking is there a method to have the information about the
> digital output sample rate at player side.
>
>
I don't suppose this will help :)
32457
ronnie
+---+
|Filename: bit rate.png
I have had a play with the new image this morning
Burnt it to a 16gb card and popped that into a rpi4b 4gb
There is a bug / cockup with the headphone jack that means the default
setting is mono :(, but as ever, the community over at the pi forum have
a workaround :)
Added a Sabre dac hat and
paul- wrote:
> Rpi does some special mapping to use all memory in 32bit mode. Still
> limited to 2gb per process.
>
> There are some changes in pCP7.
> 32bit images is pure 32 bit
> 64bit is pure 64bit.
>
> We had to separate for repo management. (Yes, pCP6 was 64bit kernel and
> 32bit
Well I remember from Windows, there is a 3gb limit (i think) on 32 bit.
I just assumed that linux is the same :confused:
a quick search
https://www.quora.com/Why-do-32-bit-Linux-kernels-only-recognize-3GB-of-RAM
Man in
slartibartfast wrote:
> What benefit does the 64 bit version bring?
>
> Sent from my Pixel 3a using Tapatalk
Well I'm thinking mostly just about using the Desktop as a stanby /
replacement music source.
I really only stream stuff these days, I haven't bought any music for
years.
64 bit
slartibartfast wrote:
> You try updating yours first [emoji3]
>
> Sent from my Pixel 3a using Tapatalk
I'm waiting for the 64 bit to come out of beta :p
I'll maybe try a fresh install later in the week, there are already a
few bugs that need attention :rolleyes:
ronnie
https://www.raspberrypi.org/blog/new-raspberry-pi-os-release-december-2020/
Switch to PulseAudio as default for audio and Bluetooth.
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
ebivan wrote:
>
> Sometimes its really good to have another set of eyes look at stuff ;)
> ;)
I was at the Opticians this morning for my annual checkup...result !!:)
Man in a van's Profile:
> root@SqueezeServer:/mnt/music# dpkg -i
> logitechmediaserver_8.0.0_i386.deb
> Selecting previously unselected package logitechmediaserver.
> (Reading database ... 34349 files and directories currently installed.)
> Preparing to unpack logitechmediaserver_8.0.0_i386.deb ...
> Unpacking
Richard24 wrote:
> It's connected via ethernet. The Virgin Hub has assigned it a
> 192.168.0.X IP address.
>
> Even with all the players unplugged I still get the port errors in the
> LMS Control Panel. I think the players are a red herring and until the
> LMS has the port issues resolved none
Well I have looked back and read the thread (I know, I know, shouda dun
that first :o:o) and if people who know a lot more about it are
involved, I give up.
Is the touch connected by ethernet or wireless
Modern routers are often dual band and it sometimes helps to give each
band its own
Richard24 wrote:
> OK, I've reinstalled LogitechMediaServer-8.0.1-1606889944.exe and I
> still get the same issue with the failed ports:
>
> LMS
> Port 3483 (slimproto): Failed
> Port 9000 (HTTP):
> Port 9090 (CLI): Failed
>
> mysqueezebox.com
> Ping: OK
> Port 3483 (slimproto): OK
> Port
JeffHart wrote:
> Thanks all for the quick responses and insights! Sounds like basically I
> just need to update my Radios and either download 8.0x and install or go
> with piCorePlayer. Would piCorePlayer allow me to also install EasyTag
> - a GUI tag editor? I ripped my library in batches
Housepower wrote:
>
>
> I have around 170GB local music and consider using a 200GB micro SC card
> to limit the runtime of my NAS.
> Any good advise for pi novice ? :)
>
> Thanks!
> Rasmus
There are some good deals about at the moment online for SSD, maybe
check your local internet seller.
@dejong-kraanendejong-nl
If you have a 2gb or larger sd card I can send you a link to a backup
image of mine (it's 368MB when un zipped, so might firt on a 1gb card)
It is LMS v7.9.3. with pCP v6.1.0
and a few Plugins installed
ronnie
garym wrote:
> oops. Yes, I meant 32GB would be more than enough. Can one even buy a
> 32mb SD card?
32mb will be the size of the original boot partion fro that version of
pCP
ronnie
Man in a van's Profile:
dej...@kraanendejong.nl wrote:
> I never updated pcp because installing pcp/lms took me (years ago) very
> very long and I think I read updating is not very simple. In the past I
> installed it via an SD-card. I just read about an insutu update, I will
> try that.
It will be better to make a
slartibartfast wrote:
> That is who I was thinking of. Why do they still do it? I remember
> having to get a DIN to phono lead to connect a Cassette Deck to a Naim
> amp [emoji1787]
>
> Sent from my Pixel 3a using Tapatalk
Well they maintain that it offers a better connection.
I know that
slartibartfast wrote:
> Some amplifiers used to run DIN sockets at line level. That caused a few
> issues [emoji3]
>
> Sent from my Pixel 3a using Tapatalk
NAIM still do :)
Man in a van's Profile:
NE5 wrote:
>
>
> If I got it, could I run this music centre from the current raspberry pi
> that I use with my main system without having to change anything ?
If it works, all you would need would be the correct cable, a hat (with
volume control) on the pi, and speakers, there are adapters
merlineng wrote:
> Am I missing something here? (must be!)
>
> Do you mean something else? :confused:
>
> Tony.
The music center only has a 5 pi din aux input, so needs a special cable
.
ronnie
Man in a van's
Hey Steve, they don't show the rear of the system in the shots, you
could always ask.
Anyway I found the model ont'internet and it seems to have one din input
/output marked
Rec / play
aux / ext tape/
I haven't messed with dinplugs since I had an Armstrong 626 (or 625, I
can't remember) in
Which model is it Steve?.
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=113307
kidstypike wrote:
> Right, I think v8.0.1 is the stable version?
>
> The community supported development branch will be 8.1.* ?
I really don't know, I thought stable meant v8.0.0 with only the
occasional update
Man
> every time i copy the url it post as a different link ffs
That, apparently, is because "nightly" is in the link. :(:o:o
It's time i stopped for the day :):)
Man in a van's Profile:
Here you go, time stamp is today
http://downloads.slimdevices.com/nightly/?ver=8.0
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
This only gives the nightly v8.0.1
https://forums.slimdevices.com/showthread.php?98711-Logitech-Media-Server-Versions
There defffo was a v8.0.0 earlier today (only the windows, windows
server and mac had todays date and the others had Friday's date (I
think)
kidstypike wrote:
> Thanks Michael.
>
> Questions - is the release version 8.0.0 or 8.0.1?
> Is there a nightly version?
>
> @paul- at pCP is saying *"Default install of LMS on pCP7.x is now the
> released 8.0.0".*
http://downloads.slimdevices.com/nightly/?ver=8.0
nightly here
Hey Philipp
This is my LMS on a rpi4b (pCP v 6.1.0)
> [Logitech Media Server Version: 8.0.0 - 1605892076 @ Fri Nov 20 18:29:14
> CET 2020
> Hostname: LMS
> Server IP Address: 192.168.1.119
> Server HTTP Port Number: 9000
>
And Focus
https://www.srf.ch/feed/podcast/sd/66d56e22-51cf-47a6-badd-7776ec4f6501.xml
Plays in my Podcasts :)
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
Hi Philipp
So, not a techy reply, but (taken from your first log
Code:
http://a.files.bbci.co.uk/media/live/manifesto/audio/simulcast/hls/nonuk/sbr_vlow/ak/bbc_world_service_news_internet.m3u8
plays in Radio > TuneIn url on my LMS.
I would
201 - 300 of 622 matches
Mail list logo
