Man in a van wrote:
> I did edit to disguise the Mac Addresses :)
>
> Ifconfig stiil works on Raspberry Bullseye
>
> I sometimes use "ip a". I did not know the "ip -d link"
>
> I'll send you a pm with the print out
I got the PM and all looks OK.
The all zeros MAC may be a red herring -
bpa wrote:
>
> An observation, the "ip addr" commands shows that the loopback
> interface (aka localhost) has a MAC address of 00:00:00:00:00.
> Could the player be sending some data out on loopback interface and not
> on eth ?
I'm out of my depth here, would that be because squeezelite is
Not successful, I had already done that, of course. The dotted circle
goes round and then the familiar message "can't connect (
) make sure
your computer (
)".
The same thing both in Touch and Duet.
fsoares's Profile:
The future of LMS will not be dictated by what players are available -
there are plenty to choose from and will continue to be available.
LMS future primarily depends on support of new and different sources of
audio and ease of control.
In recent times, the main LMS changes have adding new
Man in a van wrote:
> But in my examples I use 127.0.0.1 a lot of the time, especially when
> testing
This is getting a bit off topic.
SB_SERVER_IP is not in squeezelite code - so there is something else
which sets it up.
This where things get fuzzy.
On a Linux system with network, ethernet
I mainly listen to podcasts in my bedroom set up, raspberry pi running
dietpi/squeezelite. Server is on a nuc in another room
Franko's Profile: http://forums.slimdevices.com/member.php?userid=72605
View this thread:
bpa wrote:
> I'm confused. Trying to understand what is or may be happening.
>
> Don't think so normally but in this case maybe - however LMS only
> communicates on one network interface at a time so if squeezelite used
> 127.0.0.1 then LMS wouldn't see the data.
>
> I can't see any option
bpa wrote:
> This where things get fuzzy.
>
> On a Linux system with network, ethernet and wireless interface - there
> are usually 3 interfaces
> LMS only uses one interface at a time. If squeezlite uses 127.0.0.1 -
> LMS must also use that interface - is that how you set it up ?
>
I'm
Franko wrote:
> Hi, it's happening on most podcasts. But just tried to listen to the
> latest of this and it was happening
> https://audioboom.com/channels/4905581.rss 'is the UK on the brink of
> recession'
Works for me LMS 8.3.1 Windows 10 Pro Desktop
39100
could you not try one from the
mherger wrote:
> >codesign -s - /Library/PreferencePanes/Squeezebox.prefPane
> >codesign -s -
> /Library/PreferencePanes/Squeezebox.prefPane/Contents/perl/bin/perl
>
> Thanks a lot MrC! I think you're on the right path: while I do sign the
>
> installer, I never signed the new Perl
bpa wrote:
>
> As players seems to be OK for a good while and then suddenly fail -
> failing PSU have been know to cause strange issues. For example, not
> all components in the player have the same tolerance, if voltage drops a
> small amount some components maybe not work correctly.
>
I
bpa wrote:
> You need to have the PlayHLS plugin installed for the normal Search to
> find HLS stations (same as BBCSounds), otherwise it will find the
> Shoutcast MP3 stream.
> That said, I just tested the MP3 URL and in stream metadata says it is
> BBC Radio Northampton
> >
Code:
DejanM wrote:
> This post is not about UPnP or which protocol is better. It is about the
> future of LMS. The number of users is constantly decreasing and in, lets
> say 5 years, many of existing squeezeboxes will give up their soul. And
> what then ? Are we a community damned to slowly
This post is not about UPnP or which protocol is better. It is about the
future of LMS. The number of users is constantly decreasing and in, lets
say 5 years, many of existing squeezeboxes will give up their soul. And
what then ? Are we a community damned to slowly disappear ? Is there any
way
Apesbrain wrote:
> Thanks, but this is my situation:
>
> [image: https://i.imgur.com/ierEfEU.jpg]
>
> I am an Administrator and I installed LMS as Administrator. Any idea on
> how I solve this?
Was that a right click on the .exe and "run as admin"install?
I don't run LMS to start until I
Franko wrote:
> After a recent update (8.3 beta) some of my podcasts are playing fast
> (chipmunk style). It's not affecting everything, can't work out if I
> have accidentally changed a setting? My music is playing back fine. Any
> ideas?
What players do you have?
LMS 8.2 on Odroid-C4 -
foxesden wrote:
> I have LMS running as a service on Windows 10, I don't know if you are
> doing that on Win 7 - but it means that it starts when the machine
> starts
Although LMS started as a service on Win 7, I can't get it to do so on
Win 10. How did you do it?
rbl wrote:
> I swapped out one of the PSUs AND IT WORKS! Problem gone, fingers
> X'd
It still surprises me that failing PSU (and probably aging hardware) can
cause problems that seemingly are not PSU related.
My current LMS server is running on a windows 10 pc. I want to shut down
this machine. So, I want to move LMS onto another machine. I don't want
to use another pc, as I want the more power efficient solution.
Electricity where I live is rather expensive.
I was all set to use picoreplayer on a
kidstypike wrote:
> There for me under 3rd party plugins, I use piCorePlayer.
>
> .
Me too.
I have seen plugins disappear (seriously) from the plugin page. Try
restarting LMS then refreshing your browser.
I think it has happened when a plugin is selected, then "apply", and
"restart later"
If one counts squeezelite software players, there are likely more LMS
users now than before Logitech dropped the hardware line over 10 years
ago.
*Home:* Pi4B-8GB/pCP8.x/4TB>LMS 8.2.x>Transporter, Touch, Boom, Radio
(all ethernet)
*Cottage:* rPi4B-4GB/pCP8.x/4TB>LMS 8.2.x>Touch>Benchmark DAC
garym wrote:
> If one counts squeezelite software players, there are likely more LMS
> users now than before Logitech dropped the hardware line over 10 years
> ago. Things will continue as long as they can. And when things no longer
> work and better options become available, things will
For anyone having issues as mentioned in this thread (after starting
LMS, problems connecting or problems with Allow Access dialogs
appearing), please see my comments starting here:
https://forums.slimdevices.com/showthread.php?116791-Most-recent-MacOS-update-broke-LMS=1065151=1#post1065151
Thanks. I'll give the picoreplayer a second look.
tjp888's Profile: http://forums.slimdevices.com/member.php?userid=3136
View this thread: http://forums.slimdevices.com/showthread.php?t=117059
Good to know, thanks for feedback. It will help others. Cheers.
MrC's Profile: http://forums.slimdevices.com/member.php?userid=468
View this thread: http://forums.slimdevices.com/showthread.php?t=116975
"Dynamic Playlist 3" is an option for me on pCP/LMS
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=117059
tjp888 wrote:
> My current LMS server is running on a windows 10 pc. I want to shut down
> this pc. So, I want to move LMS onto another machine. I don't want to
> use another pc, as I want the more power efficient solution. Electricity
> where I live is rather expensive.
> I was all set to use
MrC wrote:
> For anyone having issues as mentioned in this thread (after starting
> LMS, problems connecting or problems with Allow Access dialogs
> appearing), please see my comments starting here:
>
>
fsoares wrote:
> I followed the workaround mentioned:
>
> "OK, HERE'S A WORKAROUND. YOU NEED TO AD-HOC CODESIGN THE IMPORTANT
> BINARIES, SINCE THE DISTRIBUTION IS NOT SIGNED BY MICHAEL OR LOGITECH.
> STOP LMS AND RUN THE FOLLOWING IN TERMINAL:
>
> CODE:
> CODESIGN -S -
FYI
Apple Silicon has stricter code signing requirements vs. Intel.
These may help:
https://eclecticlight.co/2020/08/22/apple-silicon-macs-will-require-signed-code/
https://lapcatsoftware.com/articles/unsigned.html
Apesbrain wrote:
> Although LMS started as a service on Win 7, I can't get it to do so on
> Win 10. How did you do it?
39102
last command in the drop down
ronnie
+---+
|Filename: start as service.jpg
Man in a van wrote:
> I'm out of my depth here, would that be because squeezelite is calling
> the LMS from 127.0.0.1?
Don't think so.
I can't see any option which lets squeezelite choose which network
interface it is supposed to use.
Looking at the code - unless mac address has been defined
Man in a van wrote:
>
> last command in the drop down
>
> ronnie
Thanks, but this is my situation:
[image: https://i.imgur.com/ierEfEU.jpg]
I am an Administrator and I installed LMS as Administrator. Any idea on
how I solve this?
Apesbrain wrote:
> Thanks, but this is my situation:
>
> [image: https://i.imgur.com/ierEfEU.jpg]
>
> I am an Administrator and I installed LMS as Administrator. Any idea on
> how I solve this?Did you run control panel as administrator?
Sent from my Pixel 3a using Tapatalk
Man in a van wrote:
> There is an option to run the Control Panel as Admin
>
> ronnie
Thanks, that worked. Sorry, not enough sleep last night.
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
35 matches
Mail list logo
