for
camera
reflashing using netboot.
Oleg
On 5 November 2010 17:45, Andrey Filippov and...@elphel.com wrote:
On Fri, Nov 5, 2010 at 11:41 AM, Linden Mills-Connery
lmil...@gmail.com
wrote:
My configuration:
-Current Firmware Version: Elphel (R) Model 353 Camera release 8.0.7
Hello Elphel community,
I have been using the NC353 very successfully as a photo finish camera for
a variety of sports and we have been having great success. At this point we
are working on refining the system and one of the issues that has been
niggling at us is the noise that get introduced at
Having a problem with the camera sensor no longer recording any images. I
can access the cameras web interface fine but any images are all the blank
1x1 frames.
I have attached the system report hoping that this will shed some light on
the issue.
Thanks,
Linden
report.tar.gz
Description: GNU
the camera could not finish initialization
/usr/local/html/autocampars.php --init
It may be caused by /etc/autocampars.xml parameters
You may try /usr/local/html/autocampars.php --init manually and see what
it will output.
Andrey
On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery
lmil
autocampars.php --init
It should create a new /etc/autocampars.xml if it doesn't exist. You might
need to reboot the camera afterwards for a cleaner effect.
The same thing will happen if you just reboot w/o this file in place.
On 5 October 2012 12:56, Linden Mills-Connery lmil...@gmail.com wrote:
I
?immediatePARAMETER1=VALUE1PARAMETER2=VALUE2.
..
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 5 October 2012 14:18, Linden Mills-Connery lmil...@gmail.com wrote:
Thanks, that fixed it. Find the bad XML attached.
Linden
On Fri, Oct 5, 2012
On 5 October 2012 16:59, Linden Mills-Connery lmil...@gmail.com wrote:
Yup, I'm on an old parsedit. See attached. Will try out the new one later
today/tomorrow.
Should I be worried that my firmware is only partly up to date? Perhaps I
should run an update again? What are your thoughts
are related to:
* GPS/IMU event logger
* UDMA
* recorder program
* new sensor's temperature reading (new parameters)
Best regards,
Oleg
On 5 October 2012 17:33, Linden Mills-Connery lmil...@gmail.com wrote:
Were can I find release notes for the new version?
Linden
On Oct 5, 2012 5:21 PM, Oleg
My client is currently away and will be back on the weekend, Hopefully he
will get a chance to run them on Saturday.
Thanks,
Linden Mills-Connery
Zone4 Team http://new.zone4.ca/contact
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215
On Thu, Apr 10, 2014 at 2:33 PM, Oleg support-list
Here is the output of the requested commands:
https://drive.google.com/file/d/0B1DQmOIFH9KVQXA2ZVRCaTNoYVQtSUlfT1YzUzUzZVZNQUQ0/edit?usp=sharing
https://drive.google.com/file/d/0B1DQmOIFH9KVVmxYZ3JIZG5IRmV3aUwwRC1UdFoxZzJBVy1j/edit?usp=sharing
What are your further thoughts?
Linden Mills-Connery
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
--
Linden Mills-Connery
Zone4 Team http://new.zone4.ca/contact
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215
___
Support-list mailing list
Support-list@support.elphel.com
http
I was just talking to the client and they have a large event next weekend
and would like to have this resolved by then. What email can I send you the
ship to address?
Thanks,
Linden Mills-Connery
Zone4 Team http://new.zone4.ca/contact
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215
On Fri
12 matches
Mail list logo