I have tried this HTTP request in a browser at get an error in the returned XML: http://10.23.33.10/parsedit.php?immediate&AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936
Error: "Wrong address==0, probably misspelled constant: 'immediate'" I get the same error even if I call: http://10.23.33.10/parsedit.php?immediate Not sure what I am missing? Linden On Fri, Oct 5, 2012 at 2:36 PM, Oleg <[email protected]>wrote: > There's a part of the file missing. > > Most likely it is caused by not syncing the camera file system after > editing that file and rebooting the camera. > > The safest way to sync this file is to save it through > >> 192.168.0.9 -> Parameter Editor > > > Or (in case of editing other files) this can be done from the telnet > session with a command "sync". > > Also, you can change parameters with a http request in the following way: > >> >> http://192.168.0.9/parsedit.php?immediate&PARAMETER1=VALUE1&PARAMETER2=VALUE2. >> .. > > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. > > On 5 October 2012 14:18, Linden Mills-Connery <[email protected]> wrote: > >> Thanks, that fixed it. Find the bad XML attached. >> >> Linden >> >> >> On Fri, Oct 5, 2012 at 1:30 PM, Oleg <[email protected]>wrote: >> >>> Linden, >>> >>> 1. Could you please send the current /etc/autocampars.xml? >>> 2. Meanwhile, you can rename the current file and regenerate the dafault >>> one: >>> >>>> php autocampars.php --init >>> >>> It should create a new /etc/autocampars.xml if it doesn't exist. You >>> might need to reboot the camera afterwards for a cleaner effect. >>> The same thing will happen if you just reboot w/o this file in place. >>> >>> On 5 October 2012 12:56, Linden Mills-Connery <[email protected]> wrote: >>> >>>> I am not sure what triggered the issue as I was not operating the >>>> camera. But yes I change several parameters between getting the camera >>>> set-up and putting it in line-scan (recording) mode. I am >>>> curious what would be the recommended way of changing parameters with HTTP >>>> requests. Currently I am emulating the HTTP request made by autocampars.php >>>> to change parameters. >>>> >>>> Output of that call: >>>> [root@Elphel353 /usr/html]788# php autocampars.php --init >>>> X-Powered-By: PHP/5.2.9 >>>> Content-type: text/html >>>> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: >>>> /etc/autocampars.xml:74: parser error : Premat >>>> ure end of data in tag GAINR >>>> line 74 in <b>/mnt/flash/html/autocampars.php</b> o >>>> n line <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: ABLE >>>> is enabled this overall gain is split bet >>>> ween the sensor analog gain and di >>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>> line <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: >>>> >>>> ^ >>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>> line <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: >>>> /etc/autocampars.xml:74: parser error : Premat >>>> ure end of data in tag >>>> descriptions line 11 in <b>/mnt/flash/html/autocampars.ph >>>> p</b> on line >>>> <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: ABLE >>>> is enabled this overall gain is split bet >>>> ween the sensor analog gain and di >>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>> line <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: >>>> >>>> ^ >>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>> line <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: >>>> /etc/autocampars.xml:74: parser error : Premat >>>> ure end of data in tag >>>> autocampars line 3 in <b>/mnt/flash/html/autocampars.php< >>>> /b> on line >>>> <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: ABLE >>>> is enabled this overall gain is split bet >>>> ween the sensor analog gain and di >>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>> line <b>954</b><br /> >>>> <br /> >>>> <b>Warning</b>: simplexml_load_file() [<a >>>> href='function.simplexml-load-file'>f >>>> unction.simplexml-load-file</a>]: >>>> >>>> ^ >>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>> line <b>954</b><br /> >>>> <br /> >>>> <b>Fatal error</b>: Call to a member function children() on a >>>> non-object in <b> >>>> /mnt/flash/html/autocampars.php</b> on line <b>958</b><br >>>> /> >>>> >>>> Is this as simple as re-flashing the original /etc/autocampars.xml >>>> file? >>>> >>>> Thanks, >>>> >>>> Linden >>>> >>>> On Fri, Oct 5, 2012 at 12:34 PM, support-list < >>>> [email protected]> wrote: >>>> >>>>> ** >>>>> Hello Linden, >>>>> >>>>> How did camera stop working did you modify (and save any parameters)? >>>>> It seems the camera could not finish initialization >>>>> /usr/local/html/autocampars.php --init >>>>> It may be caused by /etc/autocampars.xml parameters >>>>> You may try "/usr/local/html/autocampars.php --init" manually and see >>>>> what it will output. >>>>> >>>>> Andrey >>>>> >>>>> ---- On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery < >>>>> [email protected]>* wrote ---- >>>>> >>>>> Having a problem with the camera sensor no longer recording any >>>>> images. I can access the cameras web interface fine but any images are all >>>>> the blank 1x1 frames. >>>>> >>>>> I have attached the system report hoping that this will shed some >>>>> light on the issue. >>>>> >>>>> Thanks, >>>>> >>>>> Linden >>>>> _______________________________________________ >>>>> Support-list mailing list >>>>> [email protected] >>>>> >>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>> >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Support-list mailing list >>>> [email protected] >>>> >>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>> >>>> >>> >>> >>> -- >>> Best regards, >>> Oleg Dzhimiev >>> Electronics Engineer >>> phone: +1 801 783 5555 x124 >>> Elphel, Inc. >>> >> >> >> _______________________________________________ >> Support-list mailing list >> [email protected] >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
