Were can I find release notes for the new version? Linden On Oct 5, 2012 5:21 PM, "Oleg" <support-list@support.elphel.com> wrote:
> You shouldn't be too worried but it would be better to update the software) > > We don't have the latest image on sf.net - I uploaded it to > http://community.elphel.com/files/8.2.13/ > Then if you're on linux you can set up nfs server and run update from the > camera: 192.168.0.9 -> System Preferences -> Firmware. > If not - you could boot from our live usb > (kubuntu-elphel-4.iso<http://community.elphel.com/files/live-dvd/>) > and update from there. > > Best regards, > Oleg > > On 5 October 2012 16:59, Linden Mills-Connery <lmil...@gmail.com> wrote: > >> Yup, I'm on an old parsedit. See attached. Will try out the new one later >> today/tomorrow. >> >> Should I be worried that my firmware is only partly up to date? Perhaps I >> should run an update again? What are your thoughts? >> >> Thanks for the help? >> >> Linden >> >> >> On Fri, Oct 5, 2012 at 4:51 PM, Oleg <support-list@support.elphel.com>wrote: >> >>> Yes, I'm on 8.2.13, yours is 8.0.9.2. But the "immediate"-key was added >>> long time ago. >>> Here's the current listing of >>> parsedit.php<http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/parsedit.php>. >>> Check >>> if your file is complete - would be interesting to look at it. >>> >>> Also, you could try to back up you old file and use the new one. >>> >>> It doesn't actually change the parameters. >>> >>> It's ok. >>> >>> Oleg >>> >>> >>> On 5 October 2012 16:34, Linden Mills-Connery <lmil...@gmail.com> wrote: >>> >>>> Very odd, do we have different firmware? >>>> >>>> Without immediate I get the GUI for changing elements, see attached. It >>>> doesn't actually change the parameters. >>>> >>>> Linden >>>> >>>> >>>> On Fri, Oct 5, 2012 at 4:27 PM, Oleg >>>> <support-list@support.elphel.com>wrote: >>>> >>>>> I tried your request and it worked. >>>>> >>>>> What do you get without "immediate"? >>>>>> >>>>>> >>>>>> http://10.23.33.10/parsedit.php?AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>> >>>>> >>>>> Oleg >>>>> >>>>> On 5 October 2012 16:21, Linden Mills-Connery <lmil...@gmail.com>wrote: >>>>> >>>>>> I have tried this HTTP request in a browser at get an error in the >>>>>> returned XML: >>>>>> >>>>>> http://10.23.33.10/parsedit.php?immediate&AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>>> >>>>>> Error: "Wrong address==0, probably misspelled constant: 'immediate'" >>>>>> >>>>>> I get the same error even if I call: >>>>>> http://10.23.33.10/parsedit.php?immediate >>>>>> >>>>>> Not sure what I am missing? >>>>>> >>>>>> Linden >>>>>> >>>>>> >>>>>> On Fri, Oct 5, 2012 at 2:36 PM, Oleg <support-list@support.elphel.com >>>>>> > wrote: >>>>>> >>>>>>> There's a part of the file missing. >>>>>>> >>>>>>> Most likely it is caused by not syncing the camera file system after >>>>>>> editing that file and rebooting the camera. >>>>>>> >>>>>>> The safest way to sync this file is to save it through >>>>>>> >>>>>>>> 192.168.0.9 -> Parameter Editor >>>>>>> >>>>>>> >>>>>>> Or (in case of editing other files) this can be done from the telnet >>>>>>> session with a command "sync". >>>>>>> >>>>>>> Also, you can change parameters with a http request in the following >>>>>>> way: >>>>>>> >>>>>>>> >>>>>>>> http://192.168.0.9/parsedit.php?immediate&PARAMETER1=VALUE1&PARAMETER2=VALUE2. >>>>>>>> .. >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> Oleg Dzhimiev >>>>>>> Electronics Engineer >>>>>>> phone: +1 801 783 5555 x124 >>>>>>> Elphel, Inc. >>>>>>> >>>>>>> On 5 October 2012 14:18, Linden Mills-Connery <lmil...@gmail.com>wrote: >>>>>>> >>>>>>>> Thanks, that fixed it. Find the bad XML attached. >>>>>>>> >>>>>>>> Linden >>>>>>>> >>>>>>>> >>>>>>>> On Fri, Oct 5, 2012 at 1:30 PM, Oleg < >>>>>>>> support-list@support.elphel.com> wrote: >>>>>>>> >>>>>>>>> Linden, >>>>>>>>> >>>>>>>>> 1. Could you please send the current /etc/autocampars.xml? >>>>>>>>> 2. Meanwhile, you can rename the current file and regenerate the >>>>>>>>> dafault one: >>>>>>>>> >>>>>>>>>> php autocampars.php --init >>>>>>>>> >>>>>>>>> It should create a new /etc/autocampars.xml if it doesn't >>>>>>>>> exist. You might need to reboot the camera afterwards for a cleaner >>>>>>>>> effect. >>>>>>>>> The same thing will happen if you just reboot w/o this file in >>>>>>>>> place. >>>>>>>>> >>>>>>>>> On 5 October 2012 12:56, Linden Mills-Connery >>>>>>>>> <lmil...@gmail.com>wrote: >>>>>>>>> >>>>>>>>>> I am not sure what triggered the issue as I was not operating the >>>>>>>>>> camera. But yes I change several parameters between getting the >>>>>>>>>> camera >>>>>>>>>> set-up and putting it in line-scan (recording) mode. I am >>>>>>>>>> curious what would be the recommended way of changing parameters >>>>>>>>>> with HTTP >>>>>>>>>> requests. Currently I am emulating the HTTP request made by >>>>>>>>>> autocampars.php >>>>>>>>>> to change parameters. >>>>>>>>>> >>>>>>>>>> Output of that call: >>>>>>>>>> [root@Elphel353 /usr/html]788# php autocampars.php --init >>>>>>>>>> X-Powered-By: PHP/5.2.9 >>>>>>>>>> Content-type: text/html >>>>>>>>>> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>> ure end of data in tag >>>>>>>>>> GAINR >>>>>>>>>> line 74 in <b>/mnt/flash/html/autocampars.php</b> o >>>>>>>>>> n line >>>>>>>>>> <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> >>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>> ween the sensor analog gain >>>>>>>>>> and di >>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>> line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ^ >>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>> line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>> ure end of data in tag >>>>>>>>>> descriptions line 11 in <b>/mnt/flash/html/autocampars.ph >>>>>>>>>> >>>>>>>>>> p</b> >>>>>>>>>> on line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> >>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>> ween the sensor analog gain >>>>>>>>>> and di >>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>> line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ^ >>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>> line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>> ure end of data in tag >>>>>>>>>> autocampars line 3 in <b>/mnt/flash/html/autocampars.php< >>>>>>>>>> /b> on line >>>>>>>>>> <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> >>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>> ween the sensor analog gain >>>>>>>>>> and di >>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>> line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ^ >>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>> line <b>954</b><br /> >>>>>>>>>> <br /> >>>>>>>>>> <b>Fatal error</b>: Call to a member function children() on a >>>>>>>>>> non-object in <b> >>>>>>>>>> /mnt/flash/html/autocampars.php</b> on line >>>>>>>>>> <b>958</b><br /> >>>>>>>>>> >>>>>>>>>> Is this as simple as re-flashing the >>>>>>>>>> original /etc/autocampars.xml file? >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> >>>>>>>>>> Linden >>>>>>>>>> >>>>>>>>>> On Fri, Oct 5, 2012 at 12:34 PM, support-list < >>>>>>>>>> support-list@support.elphel.com> wrote: >>>>>>>>>> >>>>>>>>>>> ** >>>>>>>>>>> Hello Linden, >>>>>>>>>>> >>>>>>>>>>> How did camera stop working did you modify (and save any >>>>>>>>>>> parameters)? >>>>>>>>>>> It seems the camera could not finish initialization >>>>>>>>>>> /usr/local/html/autocampars.php --init >>>>>>>>>>> It may be caused by /etc/autocampars.xml parameters >>>>>>>>>>> You may try "/usr/local/html/autocampars.php --init" manually >>>>>>>>>>> and see what it will output. >>>>>>>>>>> >>>>>>>>>>> Andrey >>>>>>>>>>> >>>>>>>>>>> ---- On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery < >>>>>>>>>>> lmil...@gmail.com>* wrote ---- >>>>>>>>>>> >>>>>>>>>>> Having a problem with the camera sensor no longer recording any >>>>>>>>>>> images. I can access the cameras web interface fine but any images >>>>>>>>>>> are all >>>>>>>>>>> the blank 1x1 frames. >>>>>>>>>>> >>>>>>>>>>> I have attached the system report hoping that this will shed >>>>>>>>>>> some light on the issue. >>>>>>>>>>> >>>>>>>>>>> Thanks, >>>>>>>>>>> >>>>>>>>>>> Linden >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Support-list mailing list >>>>>>>>>>> Support-list@support.elphel.com >>>>>>>>>>> >>>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Support-list mailing list >>>>>>>>>> Support-list@support.elphel.com >>>>>>>>>> >>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Best regards, >>>>>>>>> Oleg Dzhimiev >>>>>>>>> Electronics Engineer >>>>>>>>> phone: +1 801 783 5555 x124 >>>>>>>>> Elphel, Inc. >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Support-list mailing list >>>>>>>> Support-list@support.elphel.com >>>>>>>> >>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Support-list mailing list >>>>>> Support-list@support.elphel.com >>>>>> >>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Support-list mailing list >>>> Support-list@support.elphel.com >>>> >>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>> >>>> >>> >>> >>> -- >>> Best regards, >>> Oleg Dzhimiev >>> Electronics Engineer >>> phone: +1 801 783 5555 x124 >>> Elphel, Inc. >>> >> >> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> > > > -- > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com