Re: [Elphel-support] Elphel NC353L

Hello, Try setting triggering from internal generator: https://wiki.elphel.com/wiki/Trigger_353 See the very 1st example. TRIG_PERIOD is set in 96MHz clocks (9600 is 1 fps) Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc.

Re: [Elphel-support] Elphel NC353L

Hi Andrey I got it to work thanx Neville [image: PMM Logo] Neville Hennig IT Technician Mobile: +27 71 759 2377 Tel: +27 18 468 1170 Addr: 36 Radloff St, Wilkoppies Klerksdorp www.profmap.co.za On 9 April 2018 at 07:57, Elphel Support wrote: > Hello

Re: [Elphel-support] Elphel NC353L-369 Master - Slave external triggering

Jan, Just one last question - the frames do seem to be in sync now, but I wanted to ask whether it’s necessary to have the same TRIG_PERIOD set on both cameras in order for this to work or whether the TRIG_PERIOD doesn’t matter for the second camera as it just waits for the signal high?

Re: [Elphel-support] Elphel NC353L-369 Master - Slave external triggering

Ahh, so the middle two wires shouldn’t be crossed. No problem, thanks for the clarification. I am going to get right on it and report back. Have a great day, Jan Blazicek. On Mon, Apr 20, 2015 at 10:30 PM, Oleg support-list@support.elphel.com wrote: Apologies, there was a wrong wiring on

Re: [Elphel-support] Elphel NC353L-369 Master - Slave external triggering

Thank you very much Oleg, everything seems to be working, although it did require a bit of fiddling. I had a couple of times where the slave camera didn’t display any new frames, but didn’t stop responding either - things like the histogram in the web CCI would suggest the frames were actually

Re: [Elphel-support] Elphel NC353L-369 Master - Slave external triggering

Apologies, there was a wrong wiring on the picture on our wiki - check out the corrected version http://wiki.elphel.com/index.php?title=File:Sync_cable.png. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. ___

Re: [Elphel-support] Elphel NC353L-369 Master - Slave external triggering

Hi Jan, In the second case TRIG is still 0, because as soon as I set that it stops responding. That's what happens when you set up external triggering but the signals are not received for some reason. Another way to test your cable would be trying the following settings: Master Camera:

Re: [Elphel-support] Elphel NC353L Issue with color

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andrey, Thanks for the quick response, before we decide to send it we would like to take a hack at in house if that is ok, please let us know ~mv On 02/27/15 17:35, support-list wrote: Stephen, it is end of March, correct? Then the easiest thing

Re: [Elphel-support] Elphel NC353L No HDD found

We have no internal CF Card connected. Please Tell us how To Enable The SATA Port PatricK Am 05.08.2013 um 22:53 schrieb support-list support-list@support.elphel.com: Patric, The only way how SATA can be disabled is if you have internal HDD or CF cards. internal CF is always IDE master,

Re: [Elphel-support] Elphel NC353L No HDD found

Patric, It is something different in your case - SATA shouid not be disabled (or in conflict) if you do not have CF cards or internal HDD. Andrey On Tue, 06 Aug 2013 03:46:49 -0700 Patrick Eisenkeil wrote We have no internal CF Card connected. Please Tell us how To Enable The

Re: [Elphel-support] Elphel NC353L No HDD found

We found out that our camera was build from sebastian pichelhofer with parts of two cameras one with a internal IDE and one with an external HDD. He told us that he used the pcb from the camera with the internal IDE to build the camera. Maybe the SATA port is disabled is there any possibility to

Re: [Elphel-support] Elphel NC353L No HDD found

Patric, The only way how SATA can be disabled is if you have internal HDD or CF cards. internal CF is always IDE master, CF cards master/slave depends on the physical position and SATA can be set to either master or slave - see

Re: [Elphel-support] Elphel NC353L No HDD found

Hello Andre We bought the camera from Sebastian Pichelhofer in Austria. Unfortunately he is in holiday and cannot help us. We have never been able to use the SATA port. Patrick Gesendet:Montag, 29. Juli 2013 um 21:44 Uhr Von:support-list support-list@support.elphel.com

Re: [Elphel-support] Elphel NC353L No HDD found

Hello Oleg, On the USB port there is not even 5V so is cannot work. We have already upgraded to the latest firmeware (2011). Thanks for your help. Patrick Gesendet:Montag, 29. Juli 2013 um 21:31 Uhr Von:Oleg support-list@support.elphel.com An:Patrick Eisenkeil

Re: [Elphel-support] Elphel NC353L No HDD found

This is the output from the dmesg: Linux version 2.6.19 (andrey@inspiron) (gcc version 3.2.1 Axis release R64/1.64) #74 Tue Sep 6 13:08:44 MDT 2011 Setting up paging and the MMU. On node 0 totalpages: 8192 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 8160 pages, LIFO

Re: [Elphel-support] Elphel NC353L No HDD found

Hello Patric, Our records show that this camera was assembled from the boards outside of Elphel, so while each board was tested individually, we did not have a chance to test the assembled camera. Do you know if the camera did work with SATA disk before? Andrey

Re: [Elphel-support] Elphel NC353L No HDD found

Maybe this has to do with the filesystem in the HDD? I have the same problem with the same camera and a solid state HDD, simply the camera doesn't detect the HDD? some people told me that probably the problem was that I was using a EXT4 file-system while the camera needs an EXT2 file-system, i

Re: [Elphel-support] Elphel NC353L No HDD found

I power it with a separate power Source and it is The Same power Source on The PC What Setup do you mean? Thanks for your help so far Patrick Am 26.07.2013 um 19:01 schrieb Oleg support-list@support.elphel.com: Patrick, What's the power source for the HDD when connected to the camera?

Re: [Elphel-support] Elphel NC353L No HDD found

Patrick, What's the power source for the HDD when connected to the camera? the same PC? A picture of your setup might be of help. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. On 26 July 2013 01:38, Patrick Eisenkeil patethek...@gmx.net wrote: Yes

Re: [Elphel-support] Elphel NC353L No HDD found

Yes The Hdd Works perfectly on The PCs Von meinem iPhone gesendet Am 26.07.2013 um 09:26 schrieb Oleg support-list@support.elphel.com: Hi Patrick, How do you power the HDD? Is it detected when connected to a PC? Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783

Re: [Elphel-support] Elphel NC353L long exposures

Hello, I have a question about night monitoring. Which lens do you use for that ? Regards. -- Éric Boudrand Le mardi 14 août 2012 à 16:37 +0300, Niko Lavonen a écrit : Hello, We here at Metsähovi Radio Observatory acquired an NC353L camera earlier this summer for all-sky monitoring of

Re: [Elphel-support] elphel NC353L-12V Kit defect

Hello Andrey, we tested the camera the way you described. Here are the answers. What camera is it? Does it have 10359 board? 10369 board? What software is it running ? It's the 10353. I tried this with the original software that was on the camera, with the software compiled from the sources

Re: [Elphel-support] elphel NC353L-12V Kit defect

Hello Viatcheslav, We can send the new 10353 board to you, if you think you can disassemble the camera and replace the board. In this case please ship us back the 10353 board, so we can test it and find the problem. The other option would be to ship the camera back to Elphel, and we will replace

Re: [Elphel-support] elphel NC353L-12V Kit defect

Viatcheslav, there is another possible reason to break the image when you move the camera d) it actually happens not because of the movement, but because of the electrostatic discharge when you touch the camera Can you please try these? Andrey On Fri, Apr 15, 2011 at 6:35 PM, Andrey