Mikael Berthe [EMAIL PROTECTED] writes:
* Torfinn Ingolfsen [EMAIL PROTECTED] [2008-08-04 23:55 +0200]:
FWIW, I learned (from the community list I believe) som time ago that
you can use 'grep Bootloader /dev/mtdblock0' from a shell on the
FreeRunner (and possibly the 1973 as well) to get
Ever since I flashed the latest firmware from
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/ , the led
light stays light after boot.
The files I used are :
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/openmoko-openmoko-devel-image-glibc-ipk--20080805-om-gta02
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Ever since I flashed the latest firmware from
| http://buildhost.openmoko.org/daily/freerunner/200808/20080805/ , the
| led light stays light after boot.
|
| The files I used are :
|
http
On Tue, Aug 5, 2008 at 12:38 PM, sparky mat [EMAIL PROTECTED] wrote:
Ever since I flashed the latest firmware from
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/ , the led
light stays light after boot.
The files I used are :
http://buildhost.openmoko.org/daily/freerunner
On Tue, Aug 5, 2008 at 12:45 PM, sparky mat [EMAIL PROTECTED] wrote:
On Tue, Aug 5, 2008 at 12:38 PM, sparky mat [EMAIL PROTECTED] wrote:
Ever since I flashed the latest firmware from
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/ , the led
light stays light after boot
Hello,
I played with my Freerunner for some days now. I am part of the users who
have the buzzing sound problem. I modified the sound configuration as
described
in the wiki and was able to eradicate the echo (caller-side) and to make the
low-level
voice volume (called-side) acceptable. But
Out of curiosity, what happened to the progress bar for each task in opkg? I
assume it must've been removed for good reason, just wondering what that
was.
___
support mailing list
support@lists.openmoko.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Gta02v5 is the mass-production version.
Yes that one is good for A6 too when they come. A6 is same as A5 except
for very minor changes in components.
| I took the plunge and flashed the 'fore mentioned
I am using today's build of 2007.2.
When I do 'opkg install gpsd', I get the following error:
Downloading
http://buildhost.automated.it/OM2007.2/packages/armv4t/gpsd_2.34-r9_armv4t.ipk
Collected errors:
* Packages were found, but none compatible with the architectures
configured
* Packages
Are ASU daily builds no longer available? None of the folders (at
http://buildhost.openmoko.org/daily/freerunner/200808/ ) have any ASU jffs2
files.
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
Am Mo 4. August 2008 schrieb Olivier Berger:
Joerg Reisenweber [EMAIL PROTECTED] writes:
Am So 3. August 2008 schrieb sparky mat:
Flushed '-t filter'. Added MASQUERADE-ing as per the wiki. It worked.
Finally, my TangoGPS can download maps :P
On Sat, Aug 2, 2008 at 11:50 PM, sparky
sparky mat ??:
I am using today's build of 2007.2.
When I do 'opkg install gpsd', I get the following error:
Downloading
http://buildhost.automated.it/OM2007.2/packages/armv4t/gpsd_2.34-r9_armv4t.ipk
Collected errors:
* Packages were found, but none compatible with the architectures
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| 2008/8/5 Joerg Reisenweber [EMAIL PROTECTED]:
| Only thing you may try for now is changing GSM-provider, as it seems
to be
| very clear the issue is to be found on some GSM-networks, and not (or
less)
| on
On Tue, Aug 05, 2008 at 11:25:56AM +0100, Andy Green wrote:
Somebody in the thread at some point said:
| 2008/8/5 Joerg Reisenweber [EMAIL PROTECTED]:
| Only thing you may try for now is changing GSM-provider, as it seems
to be
| very clear the issue is to be found on some GSM-networks, and
2008/8/5 Andy Green [EMAIL PROTECTED]:
Do they say the buzzing is consistent, or it comes and goes?
I've not asked in any detail. What frequency of coming and going has
been reported? Are we talking seconds or minutes?
Jeff
___
support mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| 2008/8/5 Andy Green [EMAIL PROTECTED]:
| Do they say the buzzing is consistent, or it comes and goes?
|
| I've not asked in any detail. What frequency of coming and going has
| been reported? Are we talking
Am Di 5. August 2008 schrieb Jeffrey Ratcliffe:
2008/8/5 Joerg Reisenweber [EMAIL PROTECTED]:
Only thing you may try for now is changing GSM-provider, as it seems to be
very clear the issue is to be found on some GSM-networks, and not (or
less)
on some others. Generally the 1800/1900
2008/8/5 Andy Green [EMAIL PROTECTED]:
Like Ole says when I started looking at it, by calling a landline in the
same room and listening to its receiver lying on the desk, it varied
tremendously and not in a repeatable way. Eg, it appeared to vary by
orientation of the phone, but when I traced
Am Di 5. August 2008 schrieb Sebastien Nanchen:
Hello,
I played with my Freerunner for some days now. I am part of the users who
have the buzzing sound problem. I modified the sound configuration as
described
in the wiki and was able to eradicate the echo (caller-side) and to make the
Am Di 5. August 2008 schrieb Jeffrey Ratcliffe:
2008/8/5 Andy Green [EMAIL PROTECTED]:
Like Ole says when I started looking at it, by calling a landline in the
same room and listening to its receiver lying on the desk, it varied
tremendously and not in a repeatable way. Eg, it appeared to
On Tue, Aug 05, 2008 at 07:49:51PM +0800, Joerg Reisenweber wrote:
Am Di 5. August 2008 schrieb Jeffrey Ratcliffe:
2008/8/5 Andy Green [EMAIL PROTECTED]:
Like Ole says when I started looking at it, by calling a landline in the
same room and listening to its receiver lying on the desk, it
Somebody in the thread at some point said:
| Ever since I flashed the latest firmware from
| http://buildhost.openmoko.org/daily/freerunner/200808/20080805/ , the
| led light stays light after boot.
|
| The files I used are :
|
http://buildhost.openmoko.org/daily/freerunner/200808/20080805
On Sat, 2008-08-02 at 14:00 +0100, Andy Green wrote:
Tomorrow's U-Boot is recommended. Current U-Boot has 50% chance per
boot of breaking USB device for the session (including in Linux).
Which one is this exactly?
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/u-boot-gta02v5
Ole Kliemann wrote:
But a new problem has appeared. When resuming after long suspend I only
get a white screen. It can sometimes be fixed by pressing something.
Maybe something that forces full redraw?
This problem was not when using the kernel that came with the Qtopia
image form
I've found the daily u-boot images at
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/
Which one do I use? There are 3 versions for the gta02v5 - what is the
difference?
Aaron
___
support mailing list
support@lists.openmoko.org
https
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I've found the daily u-boot images at
| http://buildhost.openmoko.org/daily/freerunner/200808/20080805/
|
| Which one do I use? There are 3 versions for the gta02v5 - what is the
| difference?
I guess
There are 3 versions for the gta02v5 - what is the
difference?
apparently the creation date.
Naw... they're the same creation date, the only difference seems to be
the `1.3.1+gitr`[22|26|30] part of the filename. I've just flashed the
'latest' one anyway - Andy Green mentioned it
There are 3 versions for the gta02v5 - what is the
difference?
apparently the creation date.
Naw... they're the same creation date, the only difference seems to be
the `1.3.1+gitr`[22|26|30] part of the filename.
well, in my browser the last modified column has thre different times:
4:18,
Hi
I've been running the qtopia image for a few days and I'd like to dual
boot it with the ASU or FSO image just to keep an eye on what is
happening with them.
Thus I have the qtopia in the main flash, and I'd like to put the ASU or
FSO image into the SD card.
However, I ran into a problem.
Am Di 5. August 2008 schrieb Andy Green:
Somebody in the thread at some point said:
| So it comes and goes in discrete steps and it lags behind the change of
| position.
|
| That's exactly the behaviour we would expect when noise is related to
| MS-TXPower controlled by a PCL command from
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Just a note, on the skelephone that I use I replaced the GSM antenna
| with a short length of patch wire, it still works (and some guy was
| complaining normal GTA02 is for hardcore hackers). I guess if I
Joerg Reisenweber wrote:
BS decides on this depending on signal-quality of MS as BS sees it.
It would be *very* helpful to confirm this, by using some RF-meter (e.g.
microwave leakage tester?), and/or reading the battery current, while
observing the noise come and go-
I tested this a while
Aaron Sowry ??:
I've found the daily u-boot images at
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/
Which one do I use? There are 3 versions for the gta02v5 - what is the
difference?
Aaron
___
support mailing list
On Tue, 2008-08-05 at 18:56 +0800, Joerg Reisenweber wrote:
Local has never been a related issue. It's always far end that get's the
buzz. Quite basic and important to understand. We have *two* distinct
audio-transfers with opposite directions. Buzz is on
FR-(mixer,GSM)-far_end only.
If
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Am Mi 6. August 2008 schrieb Andy Green:
| Somebody in the thread at some point said:
|
| | Just a note, on the skelephone that I use I replaced the GSM antenna
| | with a short length of patch wire, it
Hi.
Can someone please provide me the current main location for the
ASU/2008.8 image? Is it on buildhost or downloads?
Would be best if you could post the whole /etc/opkg/ stuff.
And please create a package for this
Thanks,
Chris.
smime.p7s
Description: S/MIME cryptographic signature
Alex Kavanagh wrote:
Hi
I've been running the qtopia image for a few days and I'd like to dual
boot it with the ASU or FSO image just to keep an eye on what is
happening with them.
Thus I have the qtopia in the main flash, and I'd like to put the ASU or
FSO image into the SD card.
from http://wiki.openmoko.org/wiki/ASU
It launched on August 08, 2008.
So I guess we will not have the images nor the feed before this date..
On Tue, Aug 5, 2008 at 2:14 PM, Christoph Anton Mitterer
[EMAIL PROTECTED] wrote:
Hi.
Can someone please provide me the current main location for
why does distro-feed-configs_1.0-r0_om-gta02.ipk attempt to overwrite all
feeds' url with
http://my-distribution.org/remote-feed/
?
this will ultimately kill any further update until replaced with
meaningful url!
___
support mailing list
yeah, I saw that yesterday... I had to change manually the file again after
the upgrade...
http://my-distribution.org/remote-feed/ was also the adresse when you image
with FSO
I do not know from where this adress comes from...
On Tue, Aug 5, 2008 at 1:55 PM, arne anka [EMAIL PROTECTED]
yeah, I saw that yesterday... I had to change manually the file again
after
the upgrade...
i was sure someone would run into this -- opkg asks you if you would like
to replace those files with then package maintainer's ones.
since i use debian i am familiar with this and almost
Neng-Yu Tu (Tony Tu) wrote:
Aaron Sowry ??:
I've found the daily u-boot images at
http://buildhost.openmoko.org/daily/freerunner/200808/20080805/
Which one do I use? There are 3 versions for the gta02v5 - what is the
difference?
It's even four ! r22, r26, r30, and r34. Besides having
Seems more to indicate the phone is active - doesnt seem to be tied to
charging at all. Only stays off when phone is dead/suspended/off. Even
on when screen saver is in effect, but not suspended. Charger on/off
has no effect.
Kernel of Aug 4th
BillK
On Tue, 2008-08-05 at 15:58 +0100, Andy
I had this problem when I put obexftp into the startup for my bluez. Turns out
it doesn't auto-background, so it was hanging there just after the startup.
Happily, I was able to ssh in, fix it, and kill the obexftp to let it start up
normal. Can you ssh in via USB still? If so look at the
agh, I was foolish enough to hit 'Y'... can somebody give me the correct
contents of the files i've overwritten?
didn't even notice the 'D' option, to be honest. I'll be using it next time!
Thanks.
-Dale
arne anka wrote:
yeah, I saw that yesterday... I had to change manually the file again
moved thread to [hardware]-ml, please continue there.
This thread closed and discontinued.
thanks
jOERG
signature.asc
Description: This is a digitally signed message part.
___
support mailing list
support@lists.openmoko.org
Ok, I'm getting something pretty odd now with GRPS setup. I'm trying this with
2008.1, which is probably a mistake, but...
I'm getting a connection, and have used cu to tip in and see I'm getting what
looks to me to be valid ppp setup packets spit back at me when I enter the
commands
Craig Woodward [EMAIL PROTECTED] writes:
Receive serial link is not 8-bit clean:
Problem: all had bit 7 set to 0
Just curious, what does
sudo stty -F /dev/ttySAC0 -a
print?
___
support mailing list
support@lists.openmoko.org
Hello,
i installed th NTP packet.. I set the date as the wiki says
so.. now
date -u
Wed Aug 6 04:25:55 UTC 2008
date
Wed Aug 6 04:26:09 UTC 2008
I did export TZ=CDT
but it seems after, the FR change the TZ again to UTC
where can I choose my Timezone , and make sure the FR display
Hi,
Ovverwrite it manually with the new Version:
opkg install
http://buildhost.openmoko.org/daily-feed/om-gta02/distro-feed-configs_1.0-r0_om-gta02.ipk;
This installs direct the file via http without searching in the
Paket-Database.
cu
Markus
Dale Maggee schrieb:
agh, I was foolish
yeah, it turns off at one point... but it s not consistent... and do not
seems related to any event... it stays on at least for 15 minutes after the
cable is disconnected
On Tue, Aug 5, 2008 at 10:15 PM, Dale Maggee [EMAIL PROTECTED]wrote:
using yesterday's kernel (5th).
For me, it does
51 matches
Mail list logo
