Hi there
Belgium is slowly starting to look a bit red again:
http://tools.geofabrik.de/osmi/?view=routinglon=5.02744lat=50.79917zoom=9overlays=unconnected_major1,unconnected_major2,unconnected_major5
These are all unconnected ways which will cause routing errors in any
navigation device based
Which editor are you using?
With JOSM you select the endnode first, then the node you want to connect
it to, while holding Ctrl of Shift, then m for merge.
In Potlatch I'm not sure. Somebody else will surely will be able to help
you with that one.
Jo
2012/9/4 Joren DC
OK, I tried it. You select the end node which gives you a red dashed line,
move it over the node and the nodes of the target way become blue.
My advice though: get used to the more powerful tool in the box. It's worth
it later on.
Jo
2012/9/4 Joren DC joren.libreoff...@telenet.be
Jo,
I'm
To be sure: am I doing it right?
http://www.openstreetmap.org/user/D!zzy/edits
I wouldn't like to mess things up :-).
Kind regards,
Joren
Op 4/09/12 22:55, Jo schreef:
OK, I tried it. You select the end node which gives you a red dashed
line, move it over the node and the nodes of the target
That will be very helpful. Thanks!
What did I wrong with my edits? I'm sorry.
Kind regards,
Joren
Op 4/09/12 23:52, Jo schreef:
I would love to tell you yes, but there are still some issues...
BTW, how do you find those unconnected ways?
If you like I'll create a 'screencast' (a recording
I'll look into them in detail tomorrow. You probably did more or less what
I said for Potlatch, but some nodes still need to be removed and sometimes
the ways need to be concatenated (samengevoegd). Which I might have
forgotten to mention.
Jo
2012/9/4 Joren DC joren.libreoff...@telenet.be
Thanks for investing your time :-).
My method as I thought you meant:
- I make sure there is a note on my connection point
- I clicked on the unconnected road
- Then clicked on the end of my selected road to select the last note
- I draw a 'new' streetline from the end of the selected road to a
It was supposed to be revealed at SOTM ;)
2012/9/4 Paul Norman penor...@mac.com
I saw this mentioned on IRC but I haven't seen it here
___
talk mailing list
talk@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk
A newer (cleaner) version is available at http://live.openstreetmap.fr/
We designed it for demo purpose, but the backend will allow much more.
I'll explain that during a lightning talk at SOTM.
--
View this message in context:
Looks good in Firefox on my phone, neither work with IE8 on my corporate
desktop however.
Phil
--
Sent from my Nokia N9
On 04/09/2012 10:57 cquest wrote:
A newer (cleaner) version is available at http://live.openstreetmap.fr/
We designed it for demo purpose, but the backend will allow
On Tue, Sep 4, 2012 at 6:57 PM, cquest cqu...@openstreetmap.fr wrote:
A newer (cleaner) version is available at http://live.openstreetmap.fr/
We designed it for demo purpose, but the backend will allow much more.
I'll explain that during a lightning talk at SOTM.
We're planning to record
Oups... IE8, forgot that one :(
2012/9/4 Philip Barnes p...@trigpoint.me.uk
Looks good in Firefox on my phone, neither work with IE8 on my corporate
desktop however.
Phil
--
Christian Quest - OpenStreetMap France -
Hi,
Could you elaborate? Would the ASI itself have geo-coords? Would it make
sense to talk to them?
Pradeep
Handled
On Aug 30, 2012 11:50 PM, Arun Ganesh arun.plane...@gmail.com wrote:
The workflow that Onkar suggested seems sensible to me, but it boils
down to the availability of data and
nel periodo 9-11 novembre, a milano si svolgerà: http://www.makersitaly.it
Io sarei dell'idea di partecipare come gruppo italiano di
openstreetmap. la partecipazione è gratuita, e la cosa ci darebbe
visibilità nell'ambiente piu' vasto degli smanettoni.
Per la nostra partecipazione non dovrebbe
Non posso esserci ma una delegazione di italian osmers ad un evento simile
è una ottima idea
Grande Simone !
Il giorno 04/set/2012 08:12, Simone Cortesi sim...@cortesi.com ha
scritto:
nel periodo 9-11 novembre, a milano si svolgerà: http://www.makersitaly.it
Io sarei dell'idea di partecipare
Il 04 settembre 2012 08:11, Simone Cortesi sim...@cortesi.com ha scritto:
nel periodo 9-11 novembre, a milano si svolgerà: http://www.makersitaly.it
Io sarei dell'idea di partecipare come gruppo italiano di
openstreetmap. la partecipazione è gratuita, e la cosa ci darebbe
visibilità
2012/9/4 floydbarber floydbar...@alice.it
**
Mi sembra che dire di *non* usarlo quando *non* c'è il cartello faccia
poca chiarezza :-)
Inoltre non abbinerei direttamente la dicitura Zona residenziale alla
living street
Mettendo insieme quello che leggo da varie parti scriverei questo. Spero
c'è qualcuno che conosce l'indirizzo mail o un link per rendere noti i problemi
riscontrati nella navigazione con osmand?
Per ora ho trovato solo il forum
Si potrebbe anche mandare un documento unitario unico. Che ne dite?
___
Talk-it mailing list
Si potrebbero stampare delle bandiere oppure uno striscione con un soggetto
ad-hoc per l'evento.
Pixartprinting.it ha messo di nuovo delle offerte.
Si tratta dello stesso tessuto con cui abbiamo stampato le bandiere
dell'anno scorso.
In pratica una bandiera in formato A0 (è esattamente 1mq), in
On Tue, Sep 04, 2012 at 09:28:33AM +0200, beppebo...@libero.it wrote:
c'è qualcuno che conosce l'indirizzo mail o un link per rendere noti i
problemi
riscontrati nella navigazione con osmand?
Per ora ho trovato solo il forum
C'il il sistema di bug tracking:
Il giorno 25 agosto 2012 12:02, sabas88 saba...@gmail.com ha scritto:
Il giorno 25/ago/2012 02:27, Martin Koppenhoefer dieterdre...@gmail.com
ha scritto:
si, dopo un po' di timore ho anch'io recentemente cominciato a mappare
quei cartelli (avevo qualche foto geotaggata, fatto per
Se qualcuno decidesse di approfittarne:
http://www.pixartprinting.it/grande-formato/stampa-bandiere-tessuti/
mi interessa assai.
Saro' a OKFestival a Helsinki dal 17 al 22 settembre e li' c'e' tutta
una sessione su osm :)
ho gia' una bandiera, ma meglio averne di piu'
Il giorno 04/set/2012 09:13, Luca Delucchi lucadel...@gmail.com ha
scritto:
Il 04 settembre 2012 08:11, Simone Cortesi sim...@cortesi.com ha
scritto:
nel periodo 9-11 novembre, a milano si svolgerà:
http://www.makersitaly.it
Io sarei dell'idea di partecipare come gruppo italiano di
Il 04 settembre 2012 10:54, sabas88 saba...@gmail.com ha scritto:
io posseggo alcune cose utili che posso darti:
- learnosm già stampati ed inanellati (magari potremmo chiedere una
donazione per chi li vuole in modo da ripagarne altri)
- adesivi
- striscione di OSM (non ce l'ho io ma uno tra
Il giorno 03 settembre 2012 23:11, Alberto albi.m...@gmail.com ha scritto:
Ciao a tutti,
scusate la domanda banale:
ma se io traccio dei Rioni (place - neighbourhood) e gli aggiungo un nome,
non è possibile visualizzali in Mapnik?
Tipo qua:
Il giorno 04/set/2012 10:54, sabas88 saba...@gmail.com ha scritto:
una introduzione+uscita e una sessione su come prodursi la mappa (con gli
esempi di utilizzo e qualche rendering al volo)?
Io direi di preparare gli script per compilare al volo la mappa dello
stand, in formato fruibile
2012/9/4 Simone Saviolo simone.savi...@gmail.com:
Il giorno 03 settembre 2012 23:11, Alberto albi.m...@gmail.com ha scritto:
Ciao a tutti,
scusate la domanda banale:
ma se io traccio dei Rioni (place - neighbourhood) e gli aggiungo un nome,
non è possibile visualizzali in Mapnik?
Tipo qua:
Ho provato a inserirlo come nodo.. ma niente da fare! Nemmeno così si vede
il nome del rione!
#Martin, dove posso lamentarmi? Lo faccio subito!
Grazie
Ciao
Il giorno 04 settembre 2012 11:19, Martin Koppenhoefer
dieterdre...@gmail.com ha scritto:
2012/9/4 Simone Saviolo
Veramente bello: http://osm7.openstreetmap.fr/~cquest/live/
Non ancora annunciato pubblicamente.
--
-S
___
Talk-it mailing list
Talk-it@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk-it
Il giorno 04 settembre 2012 02:24, Alexander Roalter
alexan...@roalter.itha scritto:
secondo il wiki, il tag railway=station non si mette sul binario, ma sul
edificio. Sul binario viene railway=stop (o, più nuovo,
public_transport=stop_position). Come fai con più binari? Ci metti più
2012/9/4 Alberto albi.m...@gmail.com:
Ho provato a inserirlo come nodo.. ma niente da fare! Nemmeno così si vede
il nome del rione!
#Martin, dove posso lamentarmi? Lo faccio subito!
in generale potresti scrivere un ticket in trac con component mapnik:
http://trac.openstreetmap.org
però in
2012/9/4 Simone Saviolo simone.savi...@gmail.com:
Non mi piace tanto l'idea che sia un nodo della via. Quelli li si spostano
spesso per disegnare meglio la strada...
+0.5, comunque quando si spostano i nodi si deve sempre essere attento
che non hanno tags, o che vanno bene i tags anche dopo lo
Il giorno 03 settembre 2012 16:09, Martin Koppenhoefer
dieterdre...@gmail.com ha scritto:
2012/9/3 Niccolo Rigacci o...@rigacci.org:
Inoltre se non si mette oneway l'eventuale programma di routing
dovrebbe considerare le convenzioni nazionali (in Inghilterra le
rotonde si fanno
Il giorno mar, 04/09/2012 alle 09.25 +0200, Andrea Musuruane ha scritto:
Sul wiki c'è una colonna per specificare il nome usato per le
living_street nelle varie nazioni e la dicitura Zona residenziale è
quella che usa il codice della strada.
L'uso dei cartelli per identificare una
Mi è sembrato che non si fosse tutti d'accordo con l'identificare le
living streets di openstreetmap con le zone residenziali del codice
della strada indicate da quel cartello. Quest'ultimo da solo non
significa praticamente niente (Notare poi che non è lo stesso cartello
che usano negli
Hallo
Habe gerade wheelmap.org entdeckt und festgestellt, das in Graz vieles
noch unbekannt ist.
Da dieses sehr einfach einzutragen ist auf der Webseite, könnt ihr
Grazer mal eintragen, was ihr wisst?
Sollt recht fix gehen und der Wheelmap helfen.
MfG,
Lars Schimmer
--
Eine Baumarktkette hat folgendes Flugblatt an Haushalte in Linz zustellen
lassen: http://quester.at/downloads/Wohnen_04_12_Fil640.pdf . Die Karte am
unteren Teil des Flugblattes entstammt offensichtlich der OSM, Rendering durch
Mapnik. Die Quelle wurde nicht genannt.
Die Karte wurde in einer
Hallo!
Keep cool... :) /0/
Die wollen offenbar eine Karte mit reduziertem Inhalt (was ja auch verständlich
ist) und sie haben das halt so gelöst. Sollen sie, können sie, dürfen sie. Ist
deren Problem. ;)
Das einzige, worauf man Sie freundlich aufmerksam machen sollte: dass Sie doch
bitte ein
Abend,
und wenn ihr sie anschreibt, weißt sie gleich drauf hin, dass das für
alle Filialen gilt... ;) [1]
Nicht dass dann wegen jeder Filiale eine Mail geschrieben werden muss... ;)
Schönen Abend noch,
Thomas
[1] http://quester.at/Default.aspx?m=10s=116
Am 04.09.2012 20:17, schrieb Andreas
On 27.07.12 14:41, Friedrich Volkmann wrote:
maxspeed=50 fehlt oder zumindest das source:maxspeed=AT:urban
In Wien gilt ziemlich flächendeckend die IG-Luft 50er Zone und eben /nicht/
AT:urban.
Und ja, viele Straßen Wiens in OSM stammen aus einer Zeit, da war maxspeed= noch
gar nicht erfunden!
Am 04.09.2012 20:17, schrieb Andreas Labres:
Hallo!
Keep cool... :) /0/
Die wollen offenbar eine Karte mit reduziertem Inhalt (was ja auch
verständlich
ist) und sie haben das halt so gelöst. Sollen sie, können sie, dürfen sie. Ist
deren Problem. ;)
Das einzige, worauf man Sie
On 04.09.2012 20:31, Andreas Labres wrote:
On 27.07.12 14:41, Friedrich Volkmann wrote:
maxspeed=50 fehlt oder zumindest das source:maxspeed=AT:urban
In Wien gilt ziemlich flächendeckend die IG-Luft 50er Zone und eben /nicht/
AT:urban.
Praktisch ist es das selbe (wenn man von den wenigen
On 4-9-2012 9:56, Maarten Deen wrote:
On 2012-09-03 20:42, Colin Smale wrote:
Het heeft onze regering behaagd om de snelheidslimieten op 's lands
autosnelwegen aan te passen. Helaas is het er niet makkelijker op
geworden; vroeger had je 120 met een paar uitzonderingen, tegenwoordig
moet je
On 2012-09-04 10:21, Frank Steggink wrote:
Alhoewel ik zelf wel van een beetje doorrijden houd, vind ik dit
gewoon een verkiezingsstunt. Ook al heeft Melanie dit aangekondigd
voordat ome Geert de stekker eruit trak... (Weet ik niet zeker, het
was rond dezelfde tijd.) De overheid zit het land
Toevallig ben ik recent iets soortgelijks tegengekomen: twee wegen (in
Bulgarije) die een stuk gelijk lopen. De laatste bewerking is van mijn
hand, maar ik heb aan de tagging niets gewijzigd:
http://www.openstreetmap.org/browse/way/133261087
http://www.openstreetmap.org/browse/relation/278730
On 03/09/12 21:25, Charles Gregory wrote:
Hi everyone,
I've received a KML of all of Tasmania's high voltage transmission lines
from a representative of Transend Networks, with no restrictions on their
usage, so I am free to upload these into OSM.
I don't find verbal permission as
Hi,
I saw this and thought I'd mention it here - ACT has launched an open data
initiative/site that may be worth monitoring:
http://all-things-spatial.blogspot.de/2012/09/act-implements-free-data-initiative.html
Cheers,
Chris
___
Talk-au mailing list
This is a question relating to Fiji, but given there isn't a talk-fj list and
I'm based in Australia I thought I'd ask here.
I was recently on Mana Island and noticed the OSM map in my Garmin was out to
the NNE by about 100 metres. I recorded a number of tracks and when I returned
noticed they
Hi Darren,
The coastline is only updated every couple of weeks. It is still a
semi-manual process. The rest of the data updates in minutes.
It should all come out fine in the wash.
Ian.
On 04/09/12 19:35, Darren Osborne wrote:
This is a question relating to Fiji, but given there isn't a
Ola,
Eu dei uma olhada nessa ferramenta, e ela nao é muito adaptada para o
tipo de remapeamento do qual a gente esta falando. A principal utilidade
dessa ferramenta nao é ajudar a remapear as vias, mas determinar quais
vias precisam ser mapeadas. No nosso caso, a gente ja sabe que todas as
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Moin!
Wie schon in talk-at geschrieben, bisher ohne Resonanz...
Eben beim Radeln kam mir wieder diese Frage in den Sinn, wie man mit
einem kleinen Garmin ETrex am besten die Radwege findet und denen folgen
kann.
Also z.B. ich will den Donauradweg
...
Um welche Schranke geht es denn in deinem Beispiel?
Diese hier?
http://www.openstreetmap.org/browse/node/1513009639
Wenn ja:
Vom Start (grün) zum Ziel (rot) kommt man nur über die Fähre, da man
nicht entgegen der Einbahnstraße fahren darf.
Mit der genannte Schranke hängt das Verhalten
Moin,
Am 04.09.2012 07:57, schrieb Ronnie Soak:
-1: dagegen. Wir haben mit den access-Tags bereits ein Mittel die
Information in einer wohl-etablierten Form zu mappen.
-1 für das -1:
Mit access Tags kann man sowas eben genau nicht beschreiben, weil
access tags von sich aus keine Zustände
Tirkon tirko...@yahoo.de wrote:
Da das nicht die einzige Schranke solchen Typs ist, könnte man ein Tag
barrier=normally_open_lift_gate nutzen.
-1
Wir mappen genausowenig für kaputte routing engines wie wir für den renderer
mappen!
Sven
--
Unix is simple and coherent, but it takes a genius
Lars Schimmer l.schim...@cgv.tugraz.at wrote:
Somit: gibt es eine brauchbare Lösung, Garmin Karten speziell für einen
Radweg aus den OSm Daten zu generieren?
Ja klar, das ist aber halt leider überhaupt nicht automatisiert.
grobe Schritte:
* Über den Data Layer in der OSM Karte die ID der
Es reicht: http://forum.openstreetmap.org/viewtopic.php?pid=270860#p270860
Er hat wieder zugeschlagen. Leider hat seawolf bereits alles gefixed und
wir haben keine Screenshots, oder?
Stephan, wie wäre es mit einem Hausbesuch?
Gruss
walter
--
View this message in context:
Am 04.09.2012 09:05, schrieb Jacques Nietsch:
Du wirst sehen, an der Schranke ist Schluss.
Dann sag Dennis Bescheid (bzw. mach ein Ticket auf wenn OSRM ein
Ticket-System besitzt), dass er bei Schranken die Access-Tags beachten soll.
http://wiki.openstreetmap.org/wiki/OSRM
Grüße,
Michael.
Also das ist nicht so einfach wie du dir das vorstellst:
a) häufig werden Relationen, und damit Routen zerstört, bzw fehlen auf
Wegteilen
b) Es gibt oft alternative und mehrere Routen - etwa dem Donauradweg in
Krems folgen - ist egal ob mit oder ohne Karte, durch verschiedene
Routen, bzw auf
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2012-09-04 10:35, Felix Hartmann wrote:
Also das ist nicht so einfach wie du dir das vorstellst:
a) häufig werden Relationen, und damit Routen zerstört, bzw fehlen
auf Wegteilen
Ja, leider. Da müsste man entsprechend auffüllen.
b) Es gibt
Hallo Lars,
ich habe mit VeloMap und etrex Legend HCx eien Tour von Venedig nach London
mit 1900km einwandfrei abgewickelt.
Streckenentwicklung auf dem Computer vorher auf BikerouteToaster mit
OpenCycleMap und GMaps gemischt, wobei ich auch ViaMichelin konsultiert
habe.
Hatte 20 tracks von
PS
Habe natuerlich das wichtigste vergessen:
Habe auch natuerlich velomap mit MapSource/BaseCamp auf dem computer
benutzt, und die Karte auf dem Rad war velomap.
Volker
2012/9/4 Lars Schimmer l.schim...@cgv.tugraz.at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Moin!
Wie schon in
Hallo,
schau dir mal folgende Anleitung an:
http://noegs.blogspot.de/2012/01/tracks-als-transparente-garmin-karte.html
Das ist so ungefähr der Weg, den Sven vorgeschlagen hat. Hier allerdings
mit dem Start bei einem gpx-Track, der dann per josm zu einer osm-Datei
konvertiert wird.
So
Erledigt!
Ticket #400
Jacques
Am 04.09.2012, 10:25 Uhr, schrieb Michael Kugelmann michaelk_...@gmx.de:
Am 04.09.2012 09:05, schrieb Jacques Nietsch:
Du wirst sehen, an der Schranke ist Schluss.
Dann sag Dennis Bescheid (bzw. mach ein Ticket auf wenn OSRM ein
Ticket-System besitzt), dass er
Am 04.09.2012, 8:45 Uhr, schrieb Lars Schimmer:
Einen Track aufs ETrex bringen ist ja
ned, bei 50 (oder waren es 500?) Punkten ist Schluß - das reicht
nichtmal für eine Tagesetappe.
Mit diesem Trick ist es mir gelungen, Tracks mit bis zu 10.000 Punkten auf ein
eTrex Vista HCx zu bekommen:
On 04.09.2012 10:50, Lars Schimmer wrote:
Und dennoch sind ALLE Radwege/Radrouten eingetragen. Schaue dir z.B.
Holland/Belgien auf der OpenCycleMap an - alles blau. Dort einem
Radweg/Radroute folgen ist schwer, wenn alles blau ist als Route.
Deswegen will ich ja auch nur EINE Route haben, ggf.
On 04.09.2012 10:50, Lars Schimmer wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2012-09-04 10:35, Felix Hartmann wrote:
Also das ist nicht so einfach wie du dir das vorstellst:
a) häufig werden Relationen, und damit Routen zerstört, bzw fehlen
auf Wegteilen
Ja, leider. Da müsste
Am 04.09.2012, 11:56 Uhr, schrieb Jacques Nietsch:
Erledigt!
Ticket #400
Direktlink, damit nicht jeder suchen muss:
https://github.com/DennisOSRM/Project-OSRM/issues/400
Eigentlich sollte motorcar=yes inzwischen (31. August) berücksichtigt werden:
Hallo,
Am 04.09.2012 11:54, schrieb aighes:
schau dir mal folgende Anleitung an:
http://noegs.blogspot.de/2012/01/tracks-als-transparente-garmin-karte.html
Das ist so ungefähr der Weg, den Sven vorgeschlagen hat. Hier allerdings mit dem
Start bei einem gpx-Track, der dann per josm zu einer
Hallo,
ich habe gerade folgendes Problem das ich mehrere Straßen/Wege, die zwar
Schotterwege(3-4m breit) sind aber die eigendlich Residential sein
sollten und auch Wohnhäuser beinhalten, taggen muss. Ich habe nun
versucht sie mit
highway=track
tracktype=grade2
zusetzen. Dies bewirkt aber auf
wwl usenet at schani.com writes:
ich habe gerade folgendes Problem das ich mehrere Straßen/Wege, die zwar
Schotterwege(3-4m breit) sind aber die eigendlich Residential sein
sollten und auch Wohnhäuser beinhalten, taggen muss. Ich habe nun
versucht sie mit
highway=track
tracktype=grade2
Hallo Lars,
Am 04.09.2012 08:45, schrieb Lars Schimmer:
und dann so ein 50-100km
breites Band um den Radweg herum mit dazu?
Ein Lösungsansatz könnte grob so aussehen: Den Weg mit dem
Douglas-Peucker-Algorithmus stark reduzieren, ein Polygon in 50km Abstand um den
reduzierten Weg
schrieb Manuel Reimer:
wwl usenet at schani.com writes:
ich habe gerade folgendes Problem das ich mehrere Straßen/Wege, die zwar
Schotterwege(3-4m breit) sind aber die eigendlich Residential sein
sollten und auch Wohnhäuser beinhalten, taggen muss. Ich habe nun
versucht sie mit
highway=track
On 04.09.2012 12:11, Felix Hartmann wrote:
On 04.09.2012 10:50, Lars Schimmer wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2012-09-04 10:35, Felix Hartmann wrote:
Also das ist nicht so einfach wie du dir das vorstellst:
a) häufig werden Relationen, und damit Routen zerstört,
On 04.09.2012 11:59, qunuxy-osmmailingli...@yahoo.com wrote:
Am 04.09.2012, 8:45 Uhr, schrieb Lars Schimmer:
Einen Track aufs ETrex bringen ist ja
ned, bei 50 (oder waren es 500?) Punkten ist Schluß - das reicht
nichtmal für eine Tagesetappe.
Mit diesem Trick ist es mir gelungen, Tracks
On 04.09.2012 12:21, Rainer Kluge wrote:
Hallo,
Am 04.09.2012 11:54, schrieb aighes:
schau dir mal folgende Anleitung an:
http://noegs.blogspot.de/2012/01/tracks-als-transparente-garmin-karte.html
Das ist so ungefähr der Weg, den Sven vorgeschlagen hat. Hier
allerdings mit dem
Start bei
On 04.09.2012 11:22, Volker Schmidt wrote:
Hallo Lars,
ich habe mit VeloMap und etrex Legend HCx eien Tour von Venedig nach London
mit 1900km einwandfrei abgewickelt.
Ich bin mit der einfachen Reitwanderkarte und eTrex auch bis nach Split
gekommen (mit ein paar interessanten Ausrutschern),
Am 04.09.2012 12:21, schrieb Rainer Kluge:
Hallo,
Am 04.09.2012 11:54, schrieb aighes:
schau dir mal folgende Anleitung an:
http://noegs.blogspot.de/2012/01/tracks-als-transparente-garmin-karte.html
Das ist so ungefähr der Weg, den Sven vorgeschlagen hat. Hier
allerdings mit dem
Start bei
Hallo,
wir wollen mal wieder einen Stammtisch in Göttingen abhalten. Und damit mal
evtl. ein paar neue Gesichter vorbei schauen, die noch nicht auf der Göttinger
Mailingliste [1] sind, gibt es die Ankündigung diese Mal auch auf talk-de.
Es sind alle willkommen, ob nun technische Fragen oder
Hallo.
Am 03.09.2012 11:24, schrieb Matthias Urlichs:
* Jemand hat auf einer Autobahn eine Schranke gemappt (barrier=lift_gate).
Vor einem Tunnel gibt es die tatsächlich. Nur ist sie halt normalerweise auf.
* Mindestens eine Routingengine (OSRM) verwendet diese Tags tatsächlich, um zu
routen.
Am 04.09.2012 17:39, schrieb Bernd Wurst:
Ich versteh jetzt die ganze Diskussion nicht.
Die Diskussion entsteht, weil OSRM sich an die Defaults im Wiki hält
(barrier - kein Durchgang außer anderweitig per access angegeben) und
dieses Verhalten für manche Mapper anscheinend unerwartet ist.
Das
Am 04.09.2012 18:35, schrieb Tobias Knerr:
Am 04.09.2012 17:39, schrieb Bernd Wurst:
Ich versteh jetzt die ganze Diskussion nicht.
Die Diskussion entsteht, weil OSRM sich an die Defaults im Wiki hält
(barrier - kein Durchgang außer anderweitig per access angegeben) und
dieses Verhalten für
Hallo,
das access eines barrier-Nodes beschreibt nur wie die Situation an der
Barriere ist. Das access am Weg nur, wie es sich auf dem Weg davor und
danach verhält. Es ist sowohl denkbar, dass man an eine üblicherweise
geschlossene Schranke von beiden Seiten heranfahren darf, als auch, dass
Hallo.
Am 04.09.2012 18:35, schrieb Tobias Knerr:
(Bahnschranken werden allerdings als Attribut des Bahnübergangs getaggt
und sind daher von dem Problem nicht betroffen.)
Das Argument ist Käse.
Man kann auch die Schranken vor dem Tunnel als Attribut des Tunnels
ansehen. Dennoch entsteht
On 03.09.12 15:43, Martin Koppenhoefer wrote:
ich bin schon dafür, die Schranke zu mappen (als Kuriosum, zur
Vollständigkeit, etc.)
Kannst ja. Aber der hier ist ein Hindernis Tag ist dafür ungeeignet.
Das ist im Grunde die schon öfter mal vorgekommene ins Gegenteil verkehren
Problematik (kann
Sven Geggus schrieb:
P.S.: Ich mache das immer so, dass ich mir die Routen in Tagesetappen
aufspalte (track nicht route) und dann abends mit dem Laptop im Garmin
aktualisiere
Nicht jeder hat auf einer zünftigen Radreise Laptop und
Notstromaggregat dabei. ;)
Am 04.09.2012 20:23, schrieb Andreas Labres:
On 03.09.12 15:43, Martin Koppenhoefer wrote:
ich bin schon dafür, die Schranke zu mappen (als Kuriosum, zur
Vollständigkeit, etc.)
Kannst ja. Aber der hier ist ein Hindernis Tag ist dafür ungeeignet.
Das ist im Grunde die schon öfter mal
On 05.09.12 01:35, Tobias Knerr wrote:
Das *wäre* ein Beispiel für diese bekannte Problematik, wenn nicht
access an barrier-Nodes von Anfang an Teil des Konzepts gewesen wäre.
Der access Tag ist für die barrier ja sowieso verkehrt rum... statt
naheliegenderweise ein das ist ein Hindernis, und
2012/8/31 Harrier Co harrie...@hotmail.com
Alguien creeria viable crear un twiter para openstreetmap colombia??
No uso twitter, pero me gustaría crear una cuenta en
https://joindiaspora.com/ https://joindiaspora.com/u/edycop
y publicar/re-publicar notas relacionadas con OMS-Colombia en ese
Asi siis järgnev: olles ise põhimõtteline pooldaja sellistele projektidele
nagu OSM, sooviksin selle kasutamist ka tööalaselt (loe: riiklikult)
propageerida. Valdkonnaks sisejulgeolek. Kahjuks on aga üks segav asjaolu:
Eestimaa kagunurk, Saatse kant, on OSMi järgi nagu üks suur põld. Kas oleks
Saad sa konkeetse pildi näiteks anda? Minumeelest on metsi seal rohkem kui
tarvis, nagu igalpool mujal Eesti piires. Kui täpne see (ehk Corine andmed) on,
on iseküsimus.
--
Jaak
On 04.09.2012, at 22:27, Maiko M wrote:
Asi siis järgnev: olles ise põhimõtteline pooldaja sellistele
Ola,
Se alguem viu o Google Map Maker, aqui temos a visão ao vivo do trabalho no OSM
http://live.openstreetmap.fr/
Sentem-se e gozam do espetáculo ;-)
___
Talk-pt mailing list
Talk-pt@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk-pt
pagaidām neaiztieciet, tur izskatās ka jūzeris iav ir ģeneralizējis
mežus, un diezgan lielās platībās, skatoties pēc changesetiem.
aizsūtīju vēstuli, redzēs, ko teiks.
2012/9/3 Rich ric...@nakts.net:
On 2012-09-03 22:37, AivarsB wrote:
Sveiki,
Kad es no kabatas velku ārā telefona austiņas,
Pirmo gadījumu iav revertoja, otro es salabošu no oriģiālās robežas,
jo nevar īsti saprast kurā brīdī kas aizgāja pa pieskari.
Ja pamanat vēl kaut ko - ziņojiet šeit. :)
2012/9/4 Raitis U. rait...@gmail.com:
pagaidām neaiztieciet, tur izskatās ka jūzeris iav ir ģeneralizējis
mežus, un diezgan
Hey Guys,
I'm currently working on addresses in the saint john area, as I am
finishing up my tracing of all the buildings in the area. I was just
wondering what your guys opinion was for including house numbers. Would you
attach them to the building or do what denmark does and have them as a
Použít national_park mi přijde nesystémové. Národní park je národní park
a evropsky významná lokalita je evropsky významná lokalita.
spíš bych se přiklonil k tomu, dát existujícímu území další atribut,
něco jako evl=yes případně natura2000=yes
J
Dne 30.8.2012 10:50, Jan Kučera napsal(a):
Má
spíš bych se přiklonil k tomu, dát existujícímu území další atribut,
něco jako evl=yes případně natura2000=yes
*** evil=yes ;)
hanoj
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk-cz
Myslím, že v tomto případě není potřeba se namáhat vymýšlením. Systém
mapování chráněných oblastí vypadá celkem propracovaně:
http://wiki.openstreetmap.org/wiki/Tag:boundary%3Dprotected_area
LM_1
Dne 4. září 2012 9:11 hanoj eha...@gmail.com napsal(a):
spíš bych se přiklonil k tomu, dát
Mike wrote:
Co jsem tak vysledoval, tak to máme přesněji než třeba Němci, kteří to
importovali z nějakého soukromého mapového zdroje, ne moc přčsného. Ale
stejně - onehdá jsem hejbnul kouskem hranice, protože byla očividně mimo
a to bylo křiku...
Tak hodně štěstí.
Mike
Ahoj,
koukal
Dne 4.9.2012 18:33, Petr Morávek [Xificurk] napsal(a):
Mike wrote:
Co jsem tak vysledoval, tak to máme přesněji než třeba Němci, kteří to
importovali z nějakého soukromého mapového zdroje, ne moc přčsného. Ale
stejně - onehdá jsem hejbnul kouskem hranice, protože byla očividně mimo
a to bylo
Bonjour
un requête XAPI qui marchait très bien il y a quelques semaines me renvoie
maintenant un message d'erreur:
http://api.openstreetmap.fr/xapi/xapi?way[damage=damaged|destroyed][bbox=71.5093,37.4557,71.5941,37.5271]
Error in
1 - 100 von 179 matches
Mail list logo