Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Hello Thomas, > Please confirm at https://bt.ritlabs.com/view.php?id=1892 Done . -- Best regards, Miguel A. Urech (Els Poblets (Alicante - Spain) Using The Bat! Version 9.0.6.1 (64-bit) on Windows 10.0 18363 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Title: Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted Hello Richard, On Sat, 30 Nov 2019 11:11:50 -0500 GMT (30-Nov-19, 23:11 +0700 GMT), Richard Newman via TBBETA wrote: Hello Thomas, Saturday, November 30, 2019, 12:27:53 AM, you wrote: After having restarted the computer, I can fully confirm that all toolbar customisations are lost. But this does not happen every time! Having to friggle a lot until I get two toolbars onto the same lines is highly annoying. They alwasy "click" onto the line above or below. Confirmed. But not consistently. Funny enough, the way the toolbar shows each time I start TB! is not consistent. What is consistent though (at least over here) is that it never shows the way I last configured it. Please support https://bt.ritlabs.com/view.php?id=1892 -- Cheers, Thomas. Message reply created with The Bat! Version 9.0.6 (64-bit) under Windows 10.0 Build 18362 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Hello Gleason, On Sat, 30 Nov 2019 11:27:39 -0500 GMT (30-Nov-19, 23:27 +0700 GMT), Gleason wrote: >> After having restarted the computer, I can fully confirm that all >> toolbar customisations are lost. But this does not happen every time! >> Having to friggle a lot until I get two toolbars onto the same >> lines is highly annoying. They alwasy "click" onto the line above or >> below. Confirmed. But not consistently. > It is a little tricky to get the tool bar to position. But with a > little patience, I can move it to where it clicks in place. The lock > trigger must be a bit small. Replace "must be" to "definitely is". Kindly support https://bt.ritlabs.com/view.php?id=1892 -- Cheers, Thomas. Message reply created with The Bat! Version 9.0.6 (64-bit) under Windows 10.0 Build 18362 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Hello MAU, On Sat, 30 Nov 2019 10:13:51 +0100 GMT (30-Nov-19, 16:13 +0700 GMT), MAU wrote: > Hello Thomas, >> Remark: It wasd trikcy to move it there. It seemed to want to be in >> a line above or below the other toolbars, it took me quite some >> patience and several tries to make it "click" into the one line > I have observed that behaviour too. Please confirm at https://bt.ritlabs.com/view.php?id=1892 -- Cheers, Thomas. Message reply created with The Bat! Version 9.0.6 (64-bit) under Windows 10.0 Build 18362 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Richard, > Hello Thomas, > Saturday, November 30, 2019, 12:27:53 AM, you wrote: > After having restarted the computer, I can fully confirm that all > toolbar customisations are lost. But this does not happen every time! > Having to friggle a lot until I get two toolbars onto the same > lines is highly annoying. They alwasy "click" onto the line above or > below. Confirmed. But not consistently. It is a little tricky to get the tool bar to position. But with a little patience, I can move it to where it clicks in place. The lock trigger must be a bit small. > -- > Best regards, > Richardmailto:the...@newmangroup.com > -- > Using The Bat! v9.0.6 on Windows v10 18363 -- Gleason TheBat! 9.0.6 Pro (64bit, no OTFE) on Windows 10.0 18362 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Hello Thomas, Saturday, November 30, 2019, 12:27:53 AM, you wrote: After having restarted the computer, I can fully confirm that all toolbar customisations are lost. But this does not happen every time! Having to friggle a lot until I get two toolbars onto the same lines is highly annoying. They alwasy "click" onto the line above or below. Confirmed. But not consistently. -- Best regards, Richardmailto:the...@newmangroup.com -- Using The Bat! v9.0.6 on Windows v10 18363 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Hello Thomas, > Remark: It wasd trikcy to move it there. It seemed to want to be in > a line above or below the other toolbars, it took me quite some > patience and several tries to make it "click" into the one line I have observed that behaviour too. -- Best regards, Miguel A. Urech (Els Poblets (Alicante - Spain) Using The Bat! Version 9.0.6 (64-bit) on Windows 10.0 18363 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Title: Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted Hello Thomas, On Sat, 30 Nov 2019 10:37:23 +0700 GMT (30-Nov-19, 10:37 +0700 GMT), Thomas Fernandez wrote: Hello Richard, On Fri, 29 Nov 2019 10:50:06 -0500 GMT (29-Nov-19, 22:50 +0700 GMT), Richard Newman via TBBETA wrote: Hello Jerry, >> Toolbar positioning not holding when TB is restarted. EJM> Confirmed. And today it loaded just as it was supposed to. I can half confirm: I set one toolbar (Quicksearch) to not showing, but it suddenly showed again upon restart. I moved one toolbar from a second line to be at the end of the first line, so that I have only one line of toolbars, and it is still there upon restart. Remark: It wasd trikcy to move it there. It seemed to want to be in a line above or below the other toolbars, it took me quite some patience and several tries to make it "click" into the one line. After having restarted the computer, I can fully confirm that all toolbar customisations are lost. Having to friggle a lot until I get two toolbars onto the same lines is highly annoying. They alwasy "click" onto the line above or below. -- Cheers, Thomas. Message reply created with The Bat! Version 9.0.6 (64-bit) under Windows 10.0 Build 18362 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted
Title: Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted Hello Richard, On Fri, 29 Nov 2019 10:50:06 -0500 GMT (29-Nov-19, 22:50 +0700 GMT), Richard Newman via TBBETA wrote: Hello Jerry, >> Toolbar positioning not holding when TB is restarted. EJM> Confirmed. And today it loaded just as it was supposed to. I can half confirm: I set one toolbar (Quicksearch) to not showing, but it suddenly showed again upon restart. I moved one toolbar from a second line to be at the end of the first line, so that I have only one line of toolbars, and it is still there upon restart. Remark: It wasd trikcy to move it there. It seemed to want to be in a line above or below the other toolbars, it took me quite some patience and several tries to make it "click" into the one line. -- Cheers, Thomas. Message reply created with The Bat! Version 9.0.6 (64-bit) under Windows 10.0 Build 18362 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
