azalia: use HDMI as second fallback

Hi, for me azalia HDMI audio playback works fine. According to [1] it had or still has problems. For machines where the default audio should not be (possibly broken) rsnd/0, but rsnd/1 this can be configured in sndiod or AUDIODEVICE. This diff would attach azalia even when there are only

OpenSMTPD: Don't return message body in successfull DNS reports

Hi, delivery success DSNs include the message body if not explicitely disabled by RET HDRS. But according to rfc3461 4.3 the body should _only_ be included for failure DSNs: […] If a DSN contains no indications of delivery failure, only the headers of the message should be returned. The

Re: explain priority codepoints and their mapping in vlan.4

On Mon, Dec 20, 2021 at 04:41:07PM -0700, Theo de Raadt wrote: You say it twice. But my eyes still glazed over it, not seeing what was going on the first two times. Maybe something more like prio 0 and 1 are mapped out of order to PCP 1 and 0, but prio 2 to 7 are mapped directly to

Re: explain priority codepoints and their mapping in vlan.4

be documented in detail. On 21 Dec 2021, at 00:54, Christopher Zimmermann wrote: Hi, it might be helpful for others to understand the meaning of codepoints 0 and 1 of the vlan priority field. OK? Christopher Here is the formatted content: The 802.1Q and 802.1ad protocols include a 3-bit priority

document patch(1) not supporting binary diffs

Hi, base patch cannot work with diffs of binary files. It might help to say so in the manpage since other implementations do support this (ab)use of patch. OK? Christopher Index: patch.1 === RCS file:

explain priority codepoints and their mapping in vlan.4

Hi, it might be helpful for others to understand the meaning of codepoints 0 and 1 of the vlan priority field. OK? Christopher Here is the formatted content: The 802.1Q and 802.1ad protocols include a 3-bit priority code point (PCP): PCP 1 is defined as the lowest priority

xhci uhub on arm64: handle device in SS_INACTIVE state

Hi, on my RK3399, a usb device connected to the USB 3 port is not detected during boot because it is in SS_INACTIVE (0x00c0) state: uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1 uhub3: uhub_attach uhub3: 2 ports with 2 removable, self powered uhub3:

Re: /bin/cp: overwrite symlink with file pointed to by symlink

Hi Quentin, Thank you for having a look. I know I'm very late, but I still like your patch. So ok chrisz@ if you want to commit it. Christopher On Fri, Nov 01, 2019 at 08:46:51PM +0100, Quentin Rameau wrote: If you're interested in adapting to POSIX, here's a proposition patch: Index:

Re: Unbound: add support for pf tables to ipset module

On Sun, Feb 07, 2021 at 04:20:26PM +, Stuart Henderson wrote: On 2021/02/07 17:04, Christopher Zimmermann wrote: Hi, a year ago I added support for our pf tables to the unbound ipset module. Upstream does not seem eager to merge it: https://github.com/NLnetLabs/unbound/pull/144

Unbound: add support for pf tables to ipset module

Hi, a year ago I added support for our pf tables to the unbound ipset module. Upstream does not seem eager to merge it: https://github.com/NLnetLabs/unbound/pull/144 Implementing pf tables support was pretty straightforward. It has been more work to adjust module's privilege management to

add OpenType bitmap fonts to xenocara

Hi, this makes the xenocara bitmap fonts available for pango apps like gvim, too. Is it ok to call fonttosfnt directly in the Makefile or is there a reason to use a macro like done for $(BDFTOPCF) ? OK? Christopher -- http://gmerlin.de OpenPGP: http://gmerlin.de/christopher.pub CB07 DA40

fonttosfnt: merge changes to fix fonts for new pango

Hi Matthieu, you already gave an ok some time ago to merge changes to fonttosfnt. Now that my changes have been tested and merged upstream I'd like to integrate them into xenocara. May I ask for another ok? Christopher Index: fonttosfnt.c

Re: OpenSMTPD: unprivileged mode - now with diff

On Sun, Apr 26, 2020 at 08:55:14AM +, gil...@poolp.org wrote: April 26, 2020 10:34 AM, "Christopher Zimmermann" wrote: Hi, I further developed my approach to allow running smtpd with fewer privileges. This diff does two things: - always run lmtp deliveries as SMTPD_USER.

Re: carp: send only IPv4 carp packets on dual stack interface

On Sat, May 23, 2020 at 01:55:54PM +1000, David Gwynne wrote: On 23 May 2020, at 8:44 am, Christopher Zimmermann wrote: On Sun, Jan 19, 2020 at 01:32:17PM +, Stuart Henderson wrote: On 2020/01/19 00:11, Sebastian Benoit wrote: chr...@openbsd.org(chr...@openbsd.org) on 2020.01.18 06:18

Re: carp: send only IPv4 carp packets on dual stack interface

On Sun, Jan 19, 2020 at 01:32:17PM +, Stuart Henderson wrote: On 2020/01/19 00:11, Sebastian Benoit wrote: chr...@openbsd.org(chr...@openbsd.org) on 2020.01.18 06:18:21 +0100: > On Wed, Jan 15, 2020 at 12:47:28PM +0100, Sebastian Benoit wrote: > >Christopher Zimmermann(chr...@op

Re: ADMtec aue(4) interface supporting VLAN_MTU ?

On Tue, Apr 21, 2020 at 04:12:16PM -0700, Chris Cappuccio wrote: Tom Smyth [tom.sm...@wirelessconnect.eu] wrote: Hi Chrisz, 4 bytes for the vlan header .. have you tried increasing the parent intetface mtu by 4bytes IFCAP_VLAN_MTU is a direct bypass for this. "hardmtu" on the parent

Re: OpenSMTPD: unprivileged mode - now with diff

On Sun, Apr 26, 2020 at 08:55:14AM +, gil...@poolp.org wrote: April 26, 2020 10:34 AM, "Christopher Zimmermann" wrote: - always run lmtp deliveries as SMTPD_USER. The change to mda_unpriv.c is needed, because otherwise all mails would be delivered to SMTPD_USER. - add tw

OpenSMTPD: unprivileged mode - now with diff

Hi, I further developed my approach to allow running smtpd with fewer privileges. This diff does two things: - always run lmtp deliveries as SMTPD_USER. The change to mda_unpriv.c is needed, because otherwise all mails would be delivered to SMTPD_USER. - add two internal flags NOPRIV

OpenSMTPD: unprivileged mode

Hi, I further developed my approach to allow running smtpd with fewer privileges. This diff does two things: - always run lmtp deliveries as SMTPD_USER. The change to mda_unpriv.c is needed, because otherwise all mails would be delivered to SMTPD_USER. - add two internal flags NOPRIV

Re: ADMtec aue(4) interface supporting VLAN_MTU ?

On Sun, Jul 07, 2019 at 01:26:55PM -0700, Chris Cappuccio wrote: Christopher Zimmermann [chr...@openbsd.org] wrote: This works: doas ifconfig vlan67 mtu 1496 this doesn't: doas ifconfig vlan67 mtu 1497 Should we therefore disable VLAN_MTU on this chipset? - ifp->if_capabilit

Re: carp: send only IPv4 carp packets on dual stack interface

On January 15, 2020 12:04:56 PM GMT+01:00, Janne Johansson wrote: >Den ons 15 jan. 2020 kl 11:57 skrev Christopher Zimmermann < >chr...@openbsd.org>: > >> So I propose to send IPv6 advertisements only when IPv4 is not >possible. >> >> Why? >>

carp: send only IPv4 carp packets on dual stack interface

Hi, as far as I can see a dual stack carp interface does not care whether it receives advertisements addressed to IPv4 or IPv6. Any one will do. So I propose to send IPv6 advertisements only when IPv4 is not possible. Why? - Noise can be reduced by using unicast advertisements. This is

/usr/bin/ftp: 308 Permanent Redirect

Hi, to me it seems that since our ftp does only support GET requests anyway, a 308 Redirect response can be handled identical to a 301 Redirect. OK? Christopher Index: fetch.c === RCS file: /cvs/src/usr.bin/ftp/fetch.c,v

/bin/cp: overwrite symlink with file pointed to by symlink

Hi, I admit this is a very special case, but anyway this is what I hit: $ touch blub; ln -s blub blab; ls -l; cp -f blub blab total 0 lrwxr-xr-x 1 madroach wheel 4 Oct 30 17:39 blab -> blub -rw-r--r-- 1 madroach wheel 0 Oct 30 17:39 blub cp: blab and blub are identical (not copied). Now

Re: apmd battery emergency message

On Fri, 20 Sep 2019 17:00:39 +0200 Alexander Bluhm wrote: > Hi, > > sometimes my laptop was running out of battery while I was working. > To avoid that, I patched apmd(8) to write a emergency message to > syslog(3). Then with this line in syslog.conf I receive a warning > in every xterm. > >

grep -ob: behave like ggrep, adapt documentation

Hi, I just tried to find the byte position of a string within a binary file using grep. Our base grep -bo let me down because it will only display the position of the '\n' delimited line, not the position of the pattern. That's what our grep(1) says: -b The offset in bytes of a matched

ADMtec aue interface does not work with full 1500 VLAN_MTU

Hi, I own this old USB ethernet controller: aue0 at uhub9 port 5 configuration 1 interface 0 "ADMtek USB To LAN Converter" rev 2.00/1.01 addr 4 aue0: address 00:05:1b:b2:96:02 ukphy0 at aue0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000749, model 0x0001 This works: doas

Re: Don't send icmp redirect to the same interface a forwarded packet came in on

On 2018-05-05 Martin Pieuchot <m...@openbsd.org> wrote: > On 03/05/18(Thu) 17:19, Christopher Zimmermann wrote: > > On 2018-05-03 Martin Pieuchot <m...@openbsd.org> wrote: > > > On 02/05/18(Wed) 14:45, Christopher Zimmermann wrote: > > > > On 2018-05-0

Re: Don't send icmp redirect to the same interface a forwarded packet came in on

On 2018-05-03 Martin Pieuchot <m...@openbsd.org> wrote: > On 02/05/18(Wed) 14:45, Christopher Zimmermann wrote: > > On 2018-05-02 Martin Pieuchot <m...@openbsd.org> wrote: > > > On 02/05/18(Wed) 11:47, Christopher Zimmermann wrote: > > > > I just wan

Re: Don't send icmp redirect to the same interface a forwarded packet came in on

On 2018-05-02 Martin Pieuchot <m...@openbsd.org> wrote: > On 02/05/18(Wed) 11:47, Christopher Zimmermann wrote: > > I just want to bring this up again. Can some network guru give me an ok > > or some feedback please? > > Can you explain with words why w

Re: Don't send icmp redirect to the same interface a forwarded packet came in on

Hi, I just want to bring this up again. Can some network guru give me an ok or some feedback please? Christopher On 2017-12-01 Christopher Zimmermann <chr...@openbsd.org> wrote: > Hi, > > by accident I discovered this rather senseless redirect: > > $ doas tcpdump -eptni

Don't send icmp redirect to the same interface a forwarded packet came in on

Hi, by accident I discovered this rather senseless redirect: $ doas tcpdump -eptni vlan2 icmp tcpdump: listening on vlan2, link-type EN10MB 11:11:11:11:11:11 22:22:22:22:22 0800 98: 192.168.1.2 > 192.168.4.7: icmp: echo request 22:22:22:22:22 11:11:11:11:11:11 0800 98: 192.168.4.7 >

Re: Could not savecore after reproducible crash - solved

This 'crash' can be prevented by turning ddb.console off. Sorry for the noise. I'm still wondering why I could not recover the dump. -- http://gmerlin.de OpenPGP: http://gmerlin.de/christopher.pub F190 D013 8F01 AA53 E080 3F3C F17F B0A1 D44E 4FEE

Could not savecore after reproducible crash

Hi, I can reliably reproduce a panic in the isa serial com port driver, but cannot recover the dumped core -> savecore: no core dump. The serial console log is attached below. What else can I try? Christopher ddb> show registers ds 0x10 es 0x10 fs

Re: Add quirks to support M-Audio FastTrack Pro (uaudio)

Hi, thanks for your patience. If some things are still unclear I'll be glad to clarify. Christopher On 2017-02-02 Martin Pieuchot <m...@openbsd.org> wrote: > On 31/01/17(Tue) 14:05, Christopher Zimmermann wrote: > > On 2017-01-29 Martin Pieuchot <m...@openbsd.org> wrote

Re: Add quirks to support M-Audio FastTrack Pro (uaudio)

Hi, below you find an updated diff. OK? On 2017-01-29 Martin Pieuchot <m...@openbsd.org> wrote: > On 29/01/17(Sun) 19:33, Christopher Zimmermann wrote: > > [...] > > @@ -444,6 +447,11 @@ uaudio_match(struct device *parent, void > > if (uaa->iface

Re: Add quirks to support M-Audio FastTrack Pro (uaudio)

On 2017-01-30 Martin Pieuchot <m...@openbsd.org> wrote: > On 29/01/17(Sun) 14:45, Christopher Zimmermann wrote: > > > You are talking about usb_subr.c? Done. > > No I'm not :) > Yes please, do not touch usb_subr.c. > Also make sure your comment below resp

Add quirks to support M-Audio FastTrack Pro (uaudio)

Hi, I needed to add some quirks to support the M-Audio FastTrack Pro USB audio interface. * The device needs to be switched to the configuration 2 to show all its capabilities. This is done by a new quirk in usb_subr.c * It claims to consume little-endian samples, but actually expects

Re: httpd: $DOCUMENT_URI macro fix for FastCGI

On 2016-04-17 Tim Baumgard wrote: > > Below is an updated diff for the man page to address your feedback. I > also included another small diff that fixes the QUERY_STRING variable > when no query string is given. The RFC states: > > The server MUST set this variable; if the

Re: httpd: $DOCUMENT_URI macro fix for FastCGI

On 2016-04-14 Tim Baumgard <open...@bmgrd.com> wrote: > > Christopher Zimmermann wrote: > > Tim Baumgard wrote: > >> According to convention and httpd.conf(5), the $DOCUMENT_URI macro > >> for FastCGI calls should expand to the request path instead of the

Re: httpd: $DOCUMENT_URI macro fix for FastCGI

On 2016-04-14 Tim Baumgard wrote: > According to convention and httpd.conf(5), the $DOCUMENT_URI macro for > FastCGI calls should expand to the request path instead of the path > alias. FastCGI / CGI is poorly documented. As far as convention goes, at least nginx uses the

Re: spamd - DNS whitelist - with prototype

the ips into the table on demand since I cannot simply download a dnswl. I already suspected relayd might be a better place to do this. Or keep it in a separate program. Sadly I cannot reinject the diverted SYN into pf. > On Tue, Mar 29, 2016 at 1:11 PM, Christopher Zimmermann > <chr...@

Re: spamd - DNS whitelist

Hi, I want to use a DNS white list to skip greylisting delays for known good addresses, which would pass the greylist anyway. To do this with spamd and OpenSMTPd I wrote a prototype which intercepts the initial SYN packet from any non-whitelisted ip. It then queries DNS whitelists and on any

Re: httpd: multiple addresses for one server

Hi, On Sat, 3 Jan 2015 14:42:18 +0100 Reyk Floeter r...@openbsd.org wrote: On Thu, Jan 01, 2015 at 11:54:46PM -0500, Geoff Steckel wrote: Is there any way todo the equivalent of: server an.example.com listen on 192.168.2.99 listen on 2001.fefe.1.1::99 I used include

sed: allow d and y functions in { } function list

Hi $ sed -e { y/o/u/ } sed: 1: { y/o/u/ }: extra text at the end of a transform command but this is allowed according to the manual: Functions can be combined to form a function list, a list of sed functions separated by newlines, as follows: { function

Re: sed: allow d and y functions in { } function list

On Wed, 22 Oct 2014 10:46:43 -0700 Philip Guenther guent...@gmail.com wrote: On Wed, Oct 22, 2014 at 8:37 AM, Christopher Zimmermann chr...@openbsd.org wrote: $ sed -e { y/o/u/ } sed: 1: { y/o/u/ }: extra text at the end of a transform command but this is allowed according to the manual

Re: sed: allow d and y functions in { } function list

On Wed, 22 Oct 2014 21:57:14 +0200 Ingo Schwarze schwa...@usta.de wrote: So the newline before the close-brace is required. Since the code matches the spec, I think we should change the doc to match both of them. Or is there some reason this extension is required? That would be the

half-duplex netcat with closed stdout / stdin

Hi, I need a shell utility for sending udp datagrams. Of course netcat is the tool of choice for this purpose. But our netcat won't ever terminate when used for sending an udp datagram: $ echo 'Hello, World!' |nc -Nu 8.8.8.8 53 also our netcat shows undefined behavior when started with closed

Re: half-duplex netcat with closed stdout / stdin

On Mon, 31 Mar 2014 20:21:17 +0100 Stuart Henderson st...@openbsd.org wrote: On 2014/03/31 20:33, Christopher Zimmermann wrote: But our netcat won't ever terminate when used for sending an udp datagram: $ echo 'Hello, World!' |nc -Nu 8.8.8.8 53 this seems to work though ... $ echo

ATM packet size quantization for newqueue

Hello, For several releases I used a similar patch for altq to crank up the bandwidth of my uplink traffic shaper without compromising its reliability with varying packet sizes over an ATM DSL link. Now that newqueue is committed I took the time and prepared a proper diff with pf.conf syntax and

Add [-q timeout] option to netcat

Hi, this patch adds this option to nc(1): -q timeout after end-of-file on stdin, wait timeout seconds and then quit. The default is no timeout. This should be compatible with the -q option of the netcat-openbsd package in debian (what the heck ?) I use this to send simple udp

Re: Add [-q timeout] option to netcat

I just noticed my patch's bedaviour is actually different to the behaviour of the debian version. for my diff the man page should actually say -q timeout after end-of-file on stdin, timeout the connection after timeout seconds. A timeout of 0 will close the connection after

Re: preparations for IP_SENDSRCADDR / race condition in6_pcbsetport()

On Wed, 7 Aug 2013 07:11:38 +0200 Claudio Jeker cje...@diehard.n-r-g.com wrote: On Tue, Aug 06, 2013 at 09:24:13PM +0200, Christopher Zimmermann wrote: Hi, I'm currently working towards an IP_SENDSRCADDR implementation. As a first step I moved the calls to in_pcbrehash() from in_pcb

preparations for IP_SENDSRCADDR / (un)tangle pcb_bind...

Hi, I'm currently working towards an IP_SENDSRCADDR implementation. As a first step I moved the calls to in_pcbrehash() from in_pcb(dis)connect() and in_pcbbind() to the call sites of those functions. This should save some calls to in_pcbrehash() in the in_pcbconnect() codepath. Also I

rare wrong routing decision

Hi, I'm still struggeling with my IPsec settup and routing. This time I'm wondering how the third cloned route below was created. 172.26.153.0/28link#1 UC 00 - 4 em0 172.26.153/24 link#5 UCS10 - 9 vether0

in6_unlink_ifa: interface address has no prefix

Hi, I have this as /etc/hostname.lo1: inet 172.26.153.50 0xff00 NONE mtu 1398 !route add 172.26.153.0/24 172.26.153.50 !route add default 172.26.153.50 -priority 12 and see the following on boot: in6_unlink_ifa: interface address 0x80624a00 has no prefix in6_unlink_ifa: interface

Re: tmpfs

On Tue, 9 Apr 2013 17:26:39 +0100 Pedro Martelletto pe...@ambientworks.net wrote: You will need a new kernel with option TMPFS enabled, fresh include files and mount_tmpfs. tmpfs is a better MFS, it is faster and can free unused memory. I have put up an updated diff at:

Re: vr(4) baby jumbos

On Thu, 7 Feb 2013 17:41:12 + Stuart Henderson s...@spacehopper.org wrote: This is extremely useful as it permits carrying stacked vlans on Alix/net5501, and also permits carrying 1500 MTU packets within pppoe(4) using the RFC4638 support. So with 5.3 I can drop the max-mss 1452 on my

Re: em(4): enable TCP/UDP checksum offload

On Sun, 4 Nov 2012 16:06:31 +0100 Christopher Zimmermann madro...@gmerlin.de wrote: On Sun, 4 Nov 2012 14:46:34 +0100 Stefan Sperling s...@openbsd.org wrote: On Sun, Nov 04, 2012 at 01:21:38PM +, Christian Weisgerber wrote: Christian Weisgerber na...@mips.inka.de wrote: Like

Re: bind mountd to a specified port

On Thu, 18 Oct 2012 19:11:37 +0200 Sebastian Reitenbach sebas...@l00-bugdead-prods.de wrote: getting NFS through a firewall is not that trivial with mountd binding to a random port each time it starts. Hi, here is how I solved it after my proposal for a fixed-port-option was rejected:

smtpd: fatal: qwalk: opendir: No such file or directory

I have no clue what is wrong here. maybe just the '0' before 'ab3' got lost? % sudo smtpd -vd startup [debug mode] parent_send_config: configuring smtp parent_send_config_client_certs: configuring smtp parent_send_config_ruleset: reloading rules and maps parent_send_config_ruleset: reloading

PPPoEoA DSL bandwidth shaping

and is there a chance to get this into the tree? Regards, Christopher Zimmermann

aue(4) states half-duplex by default ?

Hi, I just started using a aue(4) device. Now I am a bit confused about full-duplex / half-duplex operation. The manpage states: full-duplex Force full duplex operation. The interface will operate in half duplex mode if this media option is not specified. But for me ifconfig aue0

Re: aue(4) states half-duplex by default ?

On 09/27/11 20:05, Brad wrote: On 27/09/11 1:59 PM, Christopher Zimmermann wrote: Hi, I just started using a aue(4) device. Now I am a bit confused about full-duplex / half-duplex operation. The manpage states: full-duplex Force full duplex operation. The interface will operate

Re: custom udp/tcp ports for mountd, rpc.statd, rpc.lockd

Hi, now here also for rpc.statd and rpc.lockd. But I could only test mountd, because I have no clients for lockd. I would really like to see this committed in cvs. Cheers, Christopher Index: sbin/mountd/mountd.8 === RCS file:

Re: custom udp/tcp ports for mountd, rpc.statd, rpc.lockd

, but changed comments and documentation to uppercase. - Wrap lines to below 80 columns please. done. On Wed, Jul 27, 2011 at 11:21:52PM +0200, Christopher Zimmermann wrote: Hi, now here also for rpc.statd and rpc.lockd. But I could only test mountd, because I have no clients for lockd. I would

Re: custom udp/tcp ports for mountd, rpc.statd, rpc.lockd

On 07/28/11 01:33, Theo de Raadt wrote: On 07/27/11 23:42, Nicholas Marriott wrote: RPC does not work that way. It uses the portmapper at port 111 for discovery. NFS at 2049 is also a known port. The rest are supposed to be unknown. Unfortunately it isn't supposed to work that way.

USB keyboard in boot_config(8)

Hi, I just installed the June 29 snapshot and noticed that my USB keyboard no longer works in the boot_config(8) prompt. It still did work in the June 24 snapshot. pckbd(4) works fine. Christopher

Re: sdn allocation and umass(4)

On 06/24/11 18:46, Joel Sing wrote: On Friday 24 June 2011, Benny Lofgren wrote: - More consistent sdn unit allocation (perhaps this is achievable with DUID, I haven't had time to explore that yet) sd(4) unit allocation will always be inconsistent and unpredicatable - DUIDs will let you

Re: sdn allocation and umass(4)

On 06/24/11 19:40, Alexander Polakov wrote: * Christopher Zimmermann madro...@zakweb.de [110624 21:24]: On 06/24/11 18:46, Joel Sing wrote: On Friday 24 June 2011, Benny Lofgren wrote: - More consistent sdn unit allocation (perhaps this is achievable with DUID, I haven't had time to explore

Re: nc(1), GNU netcat and FIN segments after all data has been sent

On 06/23/11 14:10, Andreas Bartelt wrote: Hello, I've noticed that there's a difference in behavior between nc(1) and GNU netcat when they talk to some daemon via TCP. The commands in the following example are basically the same: GNU netcat: netcat host 1234 infile nc(1): nc host

Re: libsndio: remove support for legacy device names

On 05/03/11 22:58, Alexandre Ratchov wrote: hack to support legacy audio/midi device naming scheme is almost two years old, ok to drop support for it? -- Alexandre This caught me by surprise. I spent about an hour in gdb and the source to find out what was wrong. aucat just told me this: %

Re: [smtpd] diff that needs testing

On 05/15/11 11:57, Gilles Chehade wrote: Please test and report breakage of your existing setups :-) No breakage for me. I use smtpd as MTA for local-to-local delivery and to relay mail to my ISP using tls. # $OpenBSD: smtpd.conf,v 1.2 2009/11/03 22:32:10 gilles Exp $ # This is the

Re: Fan mode management in acpithinkpad(4)

On 05/13/11 20:56, Alexander Polakov wrote: * Marco Peereboomsl...@peereboom.us [110512 17:59]: On Thu, May 12, 2011 at 03:32:56PM +0200, Christopher Zimmermann wrote: On 05/12/11 14:37, Vadim Zhukov wrote: Hello all. Here is a patch that allows for me to work on other things. :) Basically

Re: Fan mode management in acpithinkpad(4)

On 05/12/11 14:37, Vadim Zhukov wrote: Hello all. Here is a patch that allows for me to work on other things. :) Basically, it makes OS choose fan mode instead of firmware. Main feature here is enabling of disengadged mode when temperature goes critical, picking 80C as a red line. Now I can

Re: bioctl should retry passphrase

On 01/14/11 00:51, Ted Unangst wrote: If I type the wrong password into bioctl at boot, disks don't exist, filesystems don't get mounted, and generally lots of things go wrong. All I need is a second chance to remind me to type the right password. In /etc/rc I simply do this: [...] # XXX

acpi and sysctl

Hi, I've finally found some time to work on the fan control support for my thinkpad. But I'm having problems calling to acpiec_write() from sysctl or timeout_set(9) context. (Assertion failure in acpiec_gpehandler()). According to dev/acpi/acpiec.c:229 this function is meant to be called only

Re: acpithinkpad(4) fan control - sysctl callback in kernel?

On 11/22/10 23:01, joshua stein wrote: as for code implementing the sysctl, it would probably be something created under machdep, like the recently added machdep.lidsuspend. Thanks for your code. It helped me to do a first test of the fan control on my T43. It reacts strangely (regulates fan

acpithinkpad(4) fan control

Hi! I'd like to implement fan speed control for Thinkpads. It is documented at http://www.thinkwiki.org/wiki/How_to_control_fan_speed#Hardware_specs and linux also implements this (but with special case for TP 570, 600e/x, 770e, 770x - anyone here with access to one of these?) Implementing a

Re: wlan scan-after-nwid quirk for ThinkPads

On 07/06/10 10:10, David Coppa wrote: On Tue, Jul 6, 2010 at 4:14 AM, Anders Langworthylagrang...@gmail.com wrote: On Mon, Jul 5, 2010 at 4:37 PM, Christopher Zimmermann madro...@zakweb.de wrote: The only thing I find funny is that the network link only comes up after I have run

802.1X - WPA enterprise mode not yet supported ?

Hi, it just took me 2 hours to figure out that OpenBSD does not yet support the WPA enterprise mode (aka 802.1X). Is this actually true? If yes, please include the patch below to make this clear in the man page. I like the high quality of the OpenBSD manpages, but today I really spent 2 hours

[PATCH] please test if dmesg has ehci0: timed out waiting for BIOS

Hi, I'm just touching this again because I'd like to see this fix committed to CVS. The problem that is fixed by this change is a complete deadlock while booting with USB2 HiSpeed enabled in BIOS. On Mon, 8 Mar 2010 15:39:55 +0100 Christopher Zimmermann wrote: Heres my theory of what went

Re: SiS190 driver: finished.

Christopher Zimmermann madro...@zakweb.de + * Copyright (c) 2007, 2008 Alexander Pohoyda alexander.poho...@gmx.net + * Copyright (c) 1997, 1998, 1999 + * Bill Paul wp...@ctr.columbia.edu. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification

Re: SiS190 driver: finished.

=== RCS file: dev/pci/if_se.c diff -N dev/pci/if_se.c --- /dev/null 1 Jan 1970 00:00:00 - +++ dev/pci/if_se.c 2 Apr 2010 11:14:44 - @@ -0,0 +1,1425 @@ +/*- + * Copyright (c) 2009, 2010 Christopher Zimmermann madro...@zakweb.de + * Copyright

testers needed for auich(4)

the CIV counter. - my last patch introduced a small bug in auich_trigger_pipe() I fixed that. Cheers, Christopher Zimmermann Index: sys/dev/pci/auich.c === RCS file: /cvs/src/sys/dev/pci/auich.c,v retrieving revision 1.81 diff -u -p

[patch] bsd.port.mk(5): document no-autoheader in CONFIGURE_STYLE

document the no-autoheader flag in CONFIGURE_STYLE Index: bsd.port.mk.5 === RCS file: /cvs/src/share/man/man5/bsd.port.mk.5,v retrieving revision 1.242 diff -u -p -r1.242 bsd.port.mk.5 --- bsd.port.mk.5 22 Mar 2010 22:02:08

Re: SiS 7002 lockup using USB2.0 'legacy' mode

Hi J.C., wow, thanks for all the work and explanation! On Sun, 7 Mar 2010 16:56:26 -0800 J.C. Roberts wrote: On Sun, 7 Mar 2010 22:31:18 +0100 Christopher Zimmermann madro...@zakweb.de wrote: ok, you misunderstood me. My BIOS needs 'legacy' to be turned on to use the USB-keyboard

Re: SiS 7002 lockup using USB2.0 'legacy' mode

ok, I got it fixed. Heres my theory of what went wrong: My (broken) BIOS does not know how to hand over the ehci host controller. Therefore the timeout. Additionally when 'HiSpeed' is selected it turns on several System Management Interupts in the ehci host controller and won't turn them off

Re: Bug found in latest -current on amd64 with bigmem = 1

On Sat, 6 Mar 2010 17:36:37 -0500 Jason Crawford ja...@purebsd.net wrote: I was testing out the latest snapshot on my amd64 laptop, and compiling latest sources, when I came across a bug. It appears that with the latest -current, the kernel floods dmesg with errors if bigmem = 1, because of

SiS 7002 lockup using USB2.0 'legacy' mode

Hi, I get a complete lock-up while booting during initialisation of my SIS7002 EHCI controller. When enabling USB2.0 support, but disabling 'legacy' mode everything is fine. I just can't use my usb keyboard to talk to the boot prompt. When I enable legacy mode, but set USB2.0 to 'FullSpeed' I

Re: SiS 7002 lockup using USB2.0 'legacy' mode

On Sun, 7 Mar 2010 12:49:00 -0800 J.C. Roberts wrote: On Sun, 7 Mar 2010 17:24:07 +0100 Christopher Zimmermann madro...@zakweb.de wrote: Hi, I get a complete lock-up while booting during initialisation of my SIS7002 EHCI controller. When enabling USB2.0 support, but disabling

Re: SiS190 driver: How to do pci_get_device and pci_read_config_byte

Hello again! In porting this SIS191 driver from freeBSD I'm stuck trying to fix a kernel panic in pool_do_get: panic: pool_do_get(mbpl: free list modified trace: panic() pool_do_get() pool_get() m_gethdr() What I don't understand is in my driver m_gethdr(M_DONTWAIT, M_DATA) is called.

Re: SiS190 driver: How to do pci_get_device and pci_read_config_byte

thanks for the fast replies. I believe you helped me very much to look in the right direction. On Sat, 24 Oct 2009 14:19:58 +0200 Claudio Jeker wrote: On Sat, Oct 24, 2009 at 01:56:51PM +0200, Christopher Zimmermann wrote: panic: pool_do_get(mbpl: free list modified Free list modified means

SiS190 driver: How to do pci_get_device and pci_read_config_byte

exist in openBSD. Any little hint is appreciated. Thanks. Cheers, Christopher Zimmermann rc = sis190_get_mac_addr_from_eeprom(pdev, dev); /* This seems to fail */ if (rc 0) { u8 reg; pci_read_config_byte(pdev, 0x73, reg); /* How to do this in openBSD */ if (reg 0x0001