Re: [Therion] grade commande
Thanks you guys, now it is working! Best, Phil > On 23 Feb 2018, at 7:40 AM, Bruce Mutton via Therion > wrote: > > Phil > I don't do this much, but here is what I do for a low grade survey. > I put this near the start of the low grade survey file. > > centreline > grade BCRA3 # low accuracy > # grade BCRA5 # high accuracy > > ... > Endcentreline > > I am not sure if the same centreline can have multiple grades if you put > grade statements in line with your data. > The Therion Book description on page 19 would suggest not, as quoted below. > > “sd▷ sets the standard deviation for the > given > measurements. The Quantity list can contain the following keywords: length, > tape, > bearing, compass, gradient, clino, counter, depth, x, y, z, position, > easting, dx, northing, dy, altitude, dz. > • grade ▷ sets standard deviations according to the survey grade > specification (see grade command). All previously specified standard > deviations or grades are > lost. If you want to change an SD, use the sd option after this command. If > multiple > grades are specified, only the last one applies. You can specify grades only > for position > or only for surveys. If you want to combine them, you must use them in one > grade line. > ” > > There are UISv1 grade options these days, but I will let someone else who > knows them verify that they work… > > Bruce > > > -Original Message- > From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Philippe > Vernant via Therion > Sent: Friday, 23 February 2018 10:11 AM > To: List for Therion users > Cc: Philippe Vernant > Subject: [Therion] grade commande > > Hi guys, > > Sorry to bother you with my dumbness, but I can't figure it out how to use > the command grade based on the manual. Let say that I have a survey with poor > measurements, how to I apply grade3 to this survey ? > > Thanks, > Phil > ___ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion>___ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion> ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Re: [Therion] grade commande
Anyway you may divide centerline to several centerlines and use diferent grades for each one. Odesláno z iPhonu 23. 2. 2018 v 7:40, Bruce Mutton via Therion : > Phil > I don't do this much, but here is what I do for a low grade survey. > I put this near the start of the low grade survey file. > > centreline > grade BCRA3 # low accuracy > # grade BCRA5 # high accuracy > > ... > Endcentreline > > I am not sure if the same centreline can have multiple grades if you put > grade statements in line with your data. > The Therion Book description on page 19 would suggest not, as quoted below. > > “sd▷ sets the standard deviation for the > given > measurements. The Quantity list can contain the following keywords: length, > tape, > bearing, compass, gradient, clino, counter, depth, x, y, z, position, > easting, dx, northing, dy, altitude, dz. > • grade ▷ sets standard deviations according to the survey grade > specification (see grade command). All previously specified standard > deviations or grades are > lost. If you want to change an SD, use the sd option after this command. If > multiple > grades are specified, only the last one applies. You can specify grades only > for position > or only for surveys. If you want to combine them, you must use them in one > grade line. > ” > > There are UISv1 grade options these days, but I will let someone else who > knows them verify that they work… > > Bruce > > > -Original Message- > From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Philippe > Vernant via Therion > Sent: Friday, 23 February 2018 10:11 AM > To: List for Therion users > Cc: Philippe Vernant > Subject: [Therion] grade commande > > Hi guys, > > Sorry to bother you with my dumbness, but I can't figure it out how to use > the command grade based on the manual. Let say that I have a survey with poor > measurements, how to I apply grade3 to this survey ? > > Thanks, > Phil > ___ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion > ___ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Re: [Therion] grade commande
The uis grades work! Am 2018-02-23 8:40, schrieb Bruce Mutton via Therion: Phil I don't do this much, but here is what I do for a low grade survey. I put this near the start of the low grade survey file. centreline grade BCRA3 # low accuracy # grade BCRA5 # high accuracy ... Endcentreline I am not sure if the same centreline can have multiple grades if you put grade statements in line with your data. The Therion Book description on page 19 would suggest not, as quoted below. “sd▷ sets the standard deviation for the given measurements. The Quantity list can contain the following keywords: length, tape, bearing, compass, gradient, clino, counter, depth, x, y, z, position, easting, dx, northing, dy, altitude, dz. • grade ▷ sets standard deviations according to the survey grade specification (see grade command). All previously specified standard deviations or grades are lost. If you want to change an SD, use the sd option after this command. If multiple grades are specified, only the last one applies. You can specify grades only for position or only for surveys. If you want to combine them, you must use them in one grade line. ” There are UISv1 grade options these days, but I will let someone else who knows them verify that they work… Bruce -Original Message- From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Philippe Vernant via Therion Sent: Friday, 23 February 2018 10:11 AM To: List for Therion users Cc: Philippe Vernant Subject: [Therion] grade commande Hi guys, Sorry to bother you with my dumbness, but I can't figure it out how to use the command grade based on the manual. Let say that I have a survey with poor measurements, how to I apply grade3 to this survey ? Thanks, Phil ___ Therion mailing list Therion@speleo.sk [1] https://mailman.speleo.sk/listinfo/therion [2] Links: -- [1] mailto:Therion@speleo.sk [2] https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Re: [Therion] grade commande
Phil I don't do this much, but here is what I do for a low grade survey. I put this near the start of the low grade survey file. centreline grade BCRA3 # low accuracy # grade BCRA5 # high accuracy ... Endcentreline I am not sure if the same centreline can have multiple grades if you put grade statements in line with your data. The Therion Book description on page 19 would suggest not, as quoted below. “sd▷ sets the standard deviation for the given measurements. The Quantity list can contain the following keywords: length, tape, bearing, compass, gradient, clino, counter, depth, x, y, z, position, easting, dx, northing, dy, altitude, dz. • grade ▷ sets standard deviations according to the survey grade specification (see grade command). All previously specified standard deviations or grades are lost. If you want to change an SD, use the sd option after this command. If multiple grades are specified, only the last one applies. You can specify grades only for position or only for surveys. If you want to combine them, you must use them in one grade line. ” There are UISv1 grade options these days, but I will let someone else who knows them verify that they work… Bruce -Original Message- From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Philippe Vernant via Therion Sent: Friday, 23 February 2018 10:11 AM To: List for Therion users Cc: Philippe Vernant Subject: [Therion] grade commande Hi guys, Sorry to bother you with my dumbness, but I can't figure it out how to use the command grade based on the manual. Let say that I have a survey with poor measurements, how to I apply grade3 to this survey ? Thanks, Phil ___ Therion mailing list <mailto:Therion@speleo.sk> Therion@speleo.sk <https://mailman.speleo.sk/listinfo/therion> https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
[Therion] grade commande
Hi guys, Sorry to bother you with my dumbness, but I can't figure it out how to use the command grade based on the manual. Let say that I have a survey with poor measurements, how to I apply grade3 to this survey ? Thanks, Phil ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion