Hi
Yes, the Austron (at least the one I ran back in the 80’s) really does not care
if it has a master or not.
If you want traceability of the signal, it needs the master.
Navigation wise, the slaves become useless once the master for that chain goes
off the air. Unless
there is a new master
Iain
Sorry to hear that. Much like the US a lost valuable reference.
That said at least the following Austrons will work on the secondaries and
only require 1 station.
2000, 2100, 2100F. I use them on secondaries all of the time.
Just punch in the gri and then select secondary on the 2100 and just
I wouldn't get too hung up over fire rating on such
cables. Your house and shop is littered with PVC
cabling that will make lots of nice toxic smoke if
it burns.
Fire rated cable, also known as plenum cable, is special
because it is meant to be run in the ducting spaces for
the HVAC system in a
A word of caution. In the last three years we have experienced problems
with the RS 232 interface. We know that wrong messages can contaminate the
code in the controller permanently preventing lock. We suspect switch bounce
or connect or disconnect while under power. With the cost of these
> It seems there is no way to estimate frequency from looking at the phase
> data then?
Not to my knowledge. The frequency count chart on the instrument itself is
always correct, since it can take the internal baseband offset out of the
incoming data. Because TimeLab doesn't have access
Skip
Whats the total power requirement to run one of these?
Regards
DaveB, NZ
- Original Message -
From: "Skip Withrow"
To: "time-nuts"
Sent: Saturday, December 12, 2015 8:10 AM
Subject: [time-nuts] 1st Batch FE-405B sold out
Dear
On 11/12/15 15:50, Bob Camp wrote:
Hi
Yes, the Austron (at least the one I ran back in the 80’s) really does not care
if it has a master or not.
If you want traceability of the signal, it needs the master.
Ah great.
Navigation wise, the slaves become useless once the master for that chain
Hi Iain
I too received this news, sad day indeed:-(
I've regularly received Lessay ok on the 2100 when Anthorn has been down
so can't say I've ever received a slave, Anthorn, with the master, Lessay
actually out of range but although I've not specifically monitored to check
I've never
Hi Folks
Received this sad message re Lessay and Soustons LORAN stations.
Would guess that France-Inter/TDF won't be far behind, as IIRC
France had decided to cease all LW transmissions, but I still
hope :)
> CONTROL CENTER BREST AND THE TWO FRENCH LORAN STATIONS (LESSAY
6731M/7499X AND
>
Thanks for these useful comments!
It seems there is no way to estimate frequency from looking at the phase
data then?
Does TimeLab have automated collection for the frequency-counter data on
the control port?
Anders
On Fri, Dec 11, 2015 at 2:51 AM, John Miles wrote:
> > Hi
And with some Luck the US appears very interested in eLORAN.
I have my Austrons running right now on 87900. They have one transmitter.
But it emits the master and a fake secondary (Y). This is a 2 week test but
there have been a number of longer duration tests starting this year.
Regards
Paul
Dear Time-Nuts,
Thanks for the enthusiastic response to the FE-405B units! All of the
oscillators that Corby had characterized have been sold. People that
requested multiple units will get one to start and have been put on the
list for the next round, so that they could be spread as far as
12 matches
Mail list logo