I'm posting this to both the Time Nuts and Volt Nuts list, as some
folks don't belong to both.
I need to get rid of some items. It has gotten so cluttered around
here that I can hardly get any work done.
Several items are free for the cost of postage. These items are marked
(postage). The rest
The Fluke 8842 is already spoken for.
Joe Gray
W5JG
On Sun, May 11, 2014 at 9:45 PM, Jay Cox iwernew...@gmail.com wrote:
On 5/11/2014 10:31 PM, Joseph Gray wrote:
Hi Joe,
I'd love to have the dead Fluke 8842 and would be happy to pay any shipping
charges.
Regards
Jay
I'm posting
Sorry, I didn't intend to clutter the list with that. It should have
been a reply to an individual.
Joe Gray
W5JG
On Tue, May 13, 2014 at 7:01 PM, Joseph Gray jg...@zianet.com wrote:
The Fluke 8842 is already spoken for.
Joe Gray
W5JG
On Sun, May 11, 2014 at 9:45 PM, Jay Cox iwernew
Are there any German speakers who live in the USA on this list? I need
someone to order me a small kit from a German web site. I'll pay you
up front to order this for me.
http://www.box73.de/product_info.php?products_id=945
It is a speech compressor kit that plugs into the mic of an FT-817. If
Thanks to all who replied. It seems that the item is not available
yet. When it is, I'll contact one of the members who offered to help.
Again, thanks.
Joe Gray
W5JG
On Sat, May 17, 2014 at 9:27 PM, Joseph Gray jg...@zianet.com wrote:
Are there any German speakers who live in the USA
Two more items to get rid of.
HP 8590A SA. 10 KHz to 1.5 GHz, -115 dBm to +30 dBm. Very clean. The
screen has no burn-in and is very bright. It has the tilt handle, but
no front cover. Option 21 (GPIB) is installed.
HP 54522A scope. 2 GS/s, 500 MHz dual channel. Channel 2 has a bad
input
Dave,
I had a 4-port GPS splitter, but sold it. I got mine from eBay. It was an
HP unit and I got it cheap. You need to watch for a good price on eBay.
I see two HP 4-way splitters on eBay for $73. Search for GPS distribution.
As for the antenna, I use an HP timing antenna. I see some Nokia
I don't know how crowded the board is, but I would use an SMD DIP clip
instead of unsoldering the chip.
Joe Gray
W5JG
On Oct 10, 2014 8:30 AM, Tom Wimmenhove tom.wimmenh...@gmail.com wrote:
I recently came across a thread on this list about undocumented FE5680
commands. I have been using a
tom 160K nov 8 2012 FE5680A_EEPROM.bin
Which part in this dump is the actual data from the EEPROM?
Thanks in advance.
Regards,
Tom
On Fri, Oct 10, 2014 at 12:21 PM, Joseph Gray jg...@zianet.com wrote:
I don't know how crowded the board is, but I would use an SMD DIP clip
instead
What does everyone think of this GPS module for ntp use? According to the
specsheet, it uses a Ublox Neo-7N.
http://www.ebay.com/itm/RY725AI-10Hz-UART-USB-interface-GPS-Glonass-QZSS-antenna-module-flash-memory-/181562403752
I'm thinking about using it for a Beaglebone ntp server. I know there
KO4BB
On October 20, 2014 8:39:16 PM CDT, Joseph Gray jg...@zianet.com wrote:
What does everyone think of this GPS module for ntp use? According to
the
specsheet, it uses a Ublox Neo-7N.
http://www.ebay.com/itm/RY725AI-10Hz-UART-USB-interface-GPS-Glonass-QZSS-antenna-module-flash-memory
.
On Mon, Oct 20, 2014 at 6:39 PM, Joseph Gray jg...@zianet.com wrote:
What does everyone think of this GPS module for ntp use? According to the
specsheet, it uses a Ublox Neo-7N.
http://www.ebay.com/itm/RY725AI-10Hz-UART-USB-interface-GPS-Glonass-QZSS-antenna-module-flash-memory
Now I'm confused. Both the ebay listing and the linked specsheet clearly
state that the Ublox Neo-7N is used. Is this true or not?
Joe Gray
W5JG
On Wed, Oct 22, 2014 at 2:50 PM, Tom Van Baak t...@leapsecond.com wrote:
The USB interface will give you unpredictable timing and you still have
, Brian Inglis
brian.ing...@systematicsw.ab.ca wrote:
On 2014-10-22 21:07, Joseph Gray wrote:
Now I'm confused. Both the ebay listing and the linked specsheet clearly
state that the Ublox Neo-7N is used. Is this true or not?
On Wed, Oct 22, 2014 at 2:50 PM, Tom Van Baak t...@leapsecond.com
- Original Message -
From: Joseph Gray jg...@zianet.com
To: brian.ing...@systematicsw.ab.ca; Discussion of precise time and
frequency measurement time-nuts@febo.com
Sent: Thursday, October 23, 2014 9:18 PM
Subject: Re: [time-nuts] GPS for ntp
OK, I see source of the confusion
This reminds me of a similar MSDOS utility that I bought years ago for
talking to HPIB plotters via the parallel port. The software came with a
cable. At the time, it was much less expensive than buying a GPIB card.
Joe Gray
W5JG
On Sun, Nov 2, 2014 at 7:54 PM, Tom Wimmenhove
I believe that this should be of interest to some list members, due to the
low phase noise of the 8662A. I don't want to spend any more time and money
on this, so I'm selling it.
The unit powers up and the status shows an error 10. Checking the output
with my HP service monitor, I get a nice
I need to divide a 125 Mhz clock by five. I have looked on Mouser and every
chip I find is either obsolete or in SMT. Can anyone recommend a chip that
is fast enough and comes in DIP?
Joe Gray
W5JG
___
time-nuts mailing list -- time-nuts@febo.com
To
to divide by 5
at 125 MHz see here http://ecee.colorado.edu/~mcleod/pdfs/IADE/references/
74AC161.pdf to be sure to work at 125MHz run with 5,5 to 6V...
73
Alex
On 11/7/2014 1:12 PM, Joseph Gray wrote:
I need to divide a 125 Mhz clock by five. I have looked on Mouser and
every
chip I find
I bought one of those ESR testers some time ago. It works very well. It is
from Russia, but ordering from Brooke is much easier :-)
Joe Gray
W5JG
On Mon, Nov 10, 2014 at 6:51 PM, Brooke Clarke bro...@pacific.net wrote:
Hi Perry:
(shameless plug) Have you measured the tantalum caps?
I sell
From the current crop of ebay OCXO's available, what have you actually used
that you would recommend for the following? Sine output, either 5V or 12V,
better than 0.2ppm stability after warmup. I plan on putting things in a
sealed box, so there shouldn't be too wide a temperature fluctuation.
You can run at 400 KHz by dividing by 5/5 and 4/9.
True. Either will work.
You said 0.2ppm stability. What do you need for accuracy and/or how
are you going to calibrate your setup?
I will initially calibrate the OXCO against my HP GPSDO. Idealy, it will
only need checking against the GPSDO
If 0.2 ppm over a narrow range is the objective, that sounds like a TCXO
application.
Please point me to such a TCXO at 14.4 MHz that is affordable.
Joe Gray
W5JG
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Some of you have probably already heard of this new clock generator chip
from Si. News of a board with this chip from Adafruit just came up on a
local Amateur list today. A quick Google shows that some folks have used
this chip in homebrew SSB rigs.
My concern would be that when this chip
Yes, I read that yesterday. It will be interesting to hear what the
outcome of the study is.
Joe Gray
W5JG
On Tue, Nov 18, 2014 at 4:59 AM, Charles Steinmetz
csteinm...@yandex.com wrote:
Dark matter the source of GPS irregularities?
it becomes clearer on a quality read-through. It is more
suggestive than detailed method proposing, enough to show the idea, but not
enough to implement it, it needs the engineering on top of it.
Cheers,
Magnus
On 11/18/2014 03:12 PM, Joseph Gray wrote:
Yes, I read that yesterday
Didier has a good suggestion as to the serial to Wifi adapter. I may
order one for my Z3801. Looking on Amazon, I see these two units that
are more reasonably priced:
http://www.amazon.com/Keynice-Ethernet-Intelligent-Communication-Wireless/dp/B00JTUVA0G/ref=pd_sim_sbs_e_1?ie=UTF8
Although my current project doesn't have the strict requirements that
many of you have, I thought I would mention part of it, due to the
recent talk of distribution amps.
I am putting one of the FE5680A's that I bought a while back into a
permanent home. I have a nice box from a gutted HP
I bought one of those recently. I haven't done more than power it on to see
if it works. I will probably look at it more over Thanksgiving.
Joe Gray
W5JG
On Nov 25, 2014 9:15 AM, Mike Cook michael.c...@sfr.fr wrote:
You may have seen them as in
Looking closely at the board, I see it uses a Venus GPS chipset. And yet
folks here are using the ublox ucenter software with it. What am I missing?
Joe Gray
W5JG
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Yes, I know that NMEA is standard. I assumed that your board was also
putting out proprietary messages.sounds like not.
Joe Gray
W5JG
On Nov 25, 2014 2:50 PM, S. Jackson via time-nuts time-nuts@febo.com
wrote:
NMEA is a company-independent format.. and the uBlox application is nice.
In a
Thanks for the link. The Navspark also uses a Venus GPS, but I don't know
if it the same one. I can't look it up at the moment.
Joe Gray
W5JG
On Nov 25, 2014 3:02 PM, paul swed paulsw...@gmail.com wrote:
Here is a link to a company that at least shares details of the SkyTraq
venus 8 chip on
Just cuious, of the two 58503A versions that yixunhk sells (Z3801A and
Z3805A), which one has the better performance? I see that the Z3805A
version has two 10 MHz outputs and one PPS.
Joe Gray
W5JG
On Sun, Oct 14, 2012 at 4:15 PM, Said Jackson saidj...@aol.com wrote:
John,
I believe Edgardo
I remember someone mentioning long ago about making GPIB cables with
ribbon cable and IDC connectors from Mouser. I can't find that
information again. What is the Mouser part number for those IDC
connectors?
Thanks,
Joe Gray
W5JG
___
time-nuts mailing
Wow, the Digikey price shot up as well. I guess I'll ebay a cable.
Joe Gray
W5JG
On Sun, Oct 14, 2012 at 8:18 PM, shali...@gmail.com wrote:
Actually they were Digikey part numbers...
Didier KO4BB
Sent from my Droid Razr 4G LTE wireless tracker.
-Original Message-
From: Joseph
Coincidentally, I just ordered a R-Pi yesterday. I have other
potential uses for it, not NTP. If you are not in a hurry, it is
possible to find the Soekris boards on ebay for a decent price. I got
one last year, in a case, for $50.
Joe Gray
W5JG
___
I have seen at least three types over the years. The straight IDC
crimp on both ends is the easiest and fairly common. Also common is
the one with IDC on the motherboard end and a solder cup DB-9 on the
other. In these, I mostly saw the wires soldered to alternate rows on
the DB-9 (top, bottom,
I have read that there were a number of people having various USB
problems. Some related to network, audio, etc. I understand that there
is work being done on the USB software. I don't know if the latest
version of Raspbian has fixed things or not. I'll be using a USB audio
dongle when my R-Pi
I ordered mine from MCM Electronics for $35. Still waiting for out.
On Oct 30, 2012 2:03 PM, paul swed paulsw...@gmail.com wrote:
Thanks was trying to figure out the difference and there was no detail on
the $25 version.
Look forward to seeing what if anything happens.
Regards
Paul.
On
Looks nice. Shame it doesn't go up to 500 MHz or more, though. If it
did, I'd probably buy one at that price. I already have an MFJ 259B
that only goes up to 170 MHz.
Joe Gray
W5JG
On Wed, Oct 31, 2012 at 2:44 PM, Poul-Henning Kamp p...@phk.freebsd.dk wrote:
If one were to rearrange the input
, Joseph Gray jg...@zianet.com wrote:
I know that some here are Amateurs and have used external sources to
provide a more accurate reference for a receiver. So, I have a noob
question or two.
Is the programmable FE-5680A suitable to replace the 12.8 MHz
reference in a Midland XTR? If so
It's interesting to see what new uses old technology can be put to
when it gets small enough and inexpensive enough. In my caving days,
30 years ago, I wouldn't have wanted to drag an HP 5071A through a
cave :-)
Joe Gray
W5JG
On Mon, Nov 12, 2012 at 3:41 PM, Robert Darlington
A friend just got a C-MAC Sine 10MHz Double Oven Oscillator and asked
me to see if anyone here knows how to hook it up and get it working.
Joe Gray
W5JG
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Can anyone recommend an inexpensive 12.8 MHz OCXO that outputs a sine
wave? I've looked online, but the only ones I find costs hundreds of
dollars. Anything 0.25 ppm or better is fine. A Vcc of 5-13.8 VDC
preferred.
Joe Gray
W5JG
___
time-nuts mailing
-offer/128-mhz-crystal-oscillator-tcxo.html
or
http://www1.futureelectronics.com/doc/IQD%20FREQUENCY%20PRODUCTS/E4191LF.pdf
or even
http://cgi.ebay.com/310376642284
Dave
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Joseph
Mike,
Surprisingly, it isn' as uncommon as I first thought. The problem
seems to be the cost, however. If I can't find something within my
budget, I'll have to improvise.
Joe Gray
W5JG
On Sat, Nov 24, 2012 at 1:53 AM, mike cook mc235...@gmail.com wrote:
Le 24 nov. 2012 à 09:26, Joseph Gray
ham price EUR 98.00 (or equivalent in US-$ plus freight. Payment by
Paypal.
I am not sure, if the freight cost may kill the opportunity for you.
Bernd
DK1AG
-Ursprüngliche Nachricht-
Von: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] Im
Auftrag von Joseph Gray
book for this company and
they have a wide variety of packages
Alan
G3NYK
- Original Message - From: Joseph Gray jg...@zianet.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Saturday, November 24, 2012 3:21 AM
Subject: [time-nuts] C-MAC hookup
/DDSVHFBeaconDriver.pdf by G4JNT. It just scraped in under
$50
Dave
Ww2r
Message: 4
Date: Sat, 24 Nov 2012 09:01:25 -0700
From: Joseph Gray jg...@zianet.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Subject: Re: [time-nuts] 12.8 MHz OCXO
Message
I'm posting this seemingly off topic information, because many times a
Time Nut needs to do something with a microcontroller (witness the
recent discussion about GPSDO's).
Sometimes, you just want to throw something together for a quick test
or for a temporary project...
I have never used an
I have a device that has an internal TCXO. I want to feed it with an
external OCXO, but I don't want to completely replace the TCXO.
Here is the scenario. On initial power on, or after a power loss, I
want the internal TCXO to be used. Once the OCXO is up, I want to
switch to it. How could this
Razr 4G LTE wireless tracker.
-Original Message-
From: Joseph Gray jg...@zianet.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, 09 Dec 2012 3:13 PM
Subject: [time-nuts] Switching oscillators
I have a device that has an internal TCXO. I want
frequency is
close to the internal oscillator. I suppose than could be done with a mixer
and glue circuitry. I don't think this is cheap though.
-Original Message-
From: Joseph Gray jg...@zianet.com
Sender: time-nuts-boun...@febo.com
Date: Sun, 9 Dec 2012 14:12:51
To: Discussion
For my use, I don't think the switching glitch will be a concern. Most
of the time, the equipment will be in a standby mode. There is a high
probability that the OCXO will be in use most of the time.
I guess my original idea of simply waiting a sufficient time for the
OXCO to warm up and then
Thanks for all the good suggestions. After further consideration, I
think I'll just keep the equipment in standby until a sufficient time
has elapsed for the OXCO to stabilize. That way I don't have to switch
oscillators at all. The whole project will be controlled by a uC board
anyway, so this
On Wed, Jan 2, 2013 at 12:37 PM, Poul-Henning Kamp p...@phk.freebsd.dk wrote:
Actually, the OS is not important, floating point support is.
That is one reason that the recent crop of inexpensive ARM Cortex M4
experimenter boards is quite interesting. I picked up two of the TI
Stellaris
Don't leave us in suspense :-) What method did you decide to use?
Joe Gray
W5JG
On Mon, Jan 7, 2013 at 8:54 PM, Tom Van Baak t...@leapsecond.com wrote:
A week ago I asked about a 10 MHz to 16 MHz multiplier. Thanks very much for
the suggestions and interesting discussion.
What's the
After many years of faithful service, my Z3801A has stopped working.
It seems to be going through a loop at powerup. All of the LEDs blink
at once, then they blink in order, left to right. After several
seconds, this is repeated. I'll have to clear the bench of the project
I was working on so I
marginal power on the 48v input.
You may find that 50-52vdc works.
On Jan 13, 2013, at 0:14, Joseph Gray jg...@zianet.com wrote:
After many years of faithful service, my Z3801A has stopped working.
It seems to be going through a loop at powerup. All of the LEDs blink
at once, then they blink
Some time ago, a local Amateur gave me a CD with some radio related
information. Also on the CD was some information from when he was in
the Air Force. As it is Time Nuts related, some of you might find this
of interest. I have posted the images in my Dropbox and will leave
them there for a few
It has been years since I had to fool with setting up my Z3801A, so my
memory may be a bit fuzzy on things.
For a quick configuration, I installed SatStat on a laptop and hooked
up a serial cable to the Z3801A. After completing a survey, I have GPS
lock again. Although the UTC time is correct,
Hal,
I did that command earlier, but got an error. I just tried it again
and I get the same error:
-221 Settings conflict
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 7:47 PM, Hal Murray hmur...@megapathdsl.net wrote:
jg...@zianet.com said:
For a quick configuration, I installed SatStat on a
I just tried manually putting the unit into holdover and setting the
date. Same error. I'll have to try power cycling.
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 8:57 PM, Hal Murray hmur...@megapathdsl.net wrote:
jg...@zianet.com said:
I did that command earlier, but got an error. I just tried it
Forcing the date on power up worked, although a bit strangely. I
entered 2013,01,14 and got an out of range error. The date then
showed as 14 Jan 2007 briefly, before showing 14 Jan 2013.
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 9:17 PM, Joseph Gray jg...@zianet.com wrote:
I just tried manually
Well, it sort of worked. Now it won't come out of holdover. It's
telling me 1 PPS CLK Invalid: Time RAIM error. It also says GPS
1PPS CLK Invalid.
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 9:28 PM, Joseph Gray jg...@zianet.com wrote:
Forcing the date on power up worked, although a bit strangely. I
, 2013 at 9:42 PM, Joseph Gray jg...@zianet.com wrote:
Well, it sort of worked. Now it won't come out of holdover. It's
telling me 1 PPS CLK Invalid: Time RAIM error. It also says GPS
1PPS CLK Invalid.
Joe Gray
W5JG
On Sun, Jan 13, 2013 at 9:28 PM, Joseph Gray jg...@zianet.com wrote:
Forcing
I just ordered a few of these. They looked like a potential substitute
for a larger OXCO in some applications. Does anyone have any
experience with them?
http://www.ebay.com/itm/NEW-10MHz-OCXO-DIP-Micro-Crystal-x1pc-5x10E-11-Oven-Oscillator-OCVCXO-GPSDO-/310380778466
Joe Gray
W5JG
I find it amusing the number of Spectracom WWVB receivers that are on
ebay lately. With the prices being asked, it looks like everyone is
trying to dump these on the unsuspecting and make a killing on
obsolete equipment.
If they were dirt cheap, I'd probably pick one up. If you could wire
in an
Good info. I'll file it away in case I ever pick up a unit cheap.
Joe Gray
W5JG
On Wed, Jan 16, 2013 at 1:11 PM, Charles P. Steinmetz
charles_steinm...@lavabit.com wrote:
That's what I did with my 8163. You need to add a Wenzel-style two-PNP
squarer and use the squarer output to replace the
I used thttpd many years ago. It is tiny and fast. There are others.
Joe Gray
W5JG
On Feb 11, 2013 3:01 PM, Jim Lux jim...@earthlink.net wrote:
I'm intrigued by the possibility of using a lightweight web server to
provide a management/user interface to test equipment or appliances (e.g.
like
Sad news. I wonder if his web pages will survive him. If not, the
Internet Archive has archived the information. The latest is at:
http://web.archive.org/web/20120823060601/http://www.rt66.com/~shera/
Joe Gray
W5JG
On Sat, Mar 23, 2013 at 1:48 PM, ewkeh...@aol.com wrote:
Brooks Shera passed
Since the list members are familiar with lots of test equipment, I'd
like to ask what the folks here think about the HP 8590A Spectrum
Analyzer. Is this model ok? Are there any particular failures I should
be aware of in this 20+ year old equipment?
I have a chance to buy one locally. The only
The dog or the planet?
On Sun, Mar 14, 2010 at 4:25 PM, Mark Sims hol...@hotmail.com wrote:
Not to mention that yesterday was Pluto's birthday!
_
Hotmail is redefining busy with tools for the New Busy. Get more from your
When in Las Cruces, go to Ranchway on Valley Drive (just south of
Picacho). It is my favorite Mexican food restaurant. Their chile is
not hot. They have a wide menu selection (including a few
non-traditional items) and good prices. They also have excellent
barbecue. It's a nice little family run
i tried ranchway yesterday. nice. i have been here for five years and
never went in before.
73
dave mallery
Once is not enough :-) You have to go back until you've sampled every
item on the menu.
Joe Gray
KA5ZEC
___
time-nuts mailing list --
http://hackaday.com/2010/01/15/know-your-resistors-tell-the-time/
I know I won't be the only one here who thinks this is very cool :-)
Joe Gray
KA5ZEC
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
If you read the comments, the color issue is discussed. Seems the only
color that isn't quite right is brown.
Joe Gray
KA5ZEC
On Tue, Apr 13, 2010 at 7:04 AM, Poul-Henning Kamp p...@phk.freebsd.dk wrote:
In message 00f401cadb08$e0ed9b90$a2c8d2...@com, Chris Stake writes:
Very cool indeed. I
Did anyone else loose GPS lock from about 0600-1200 UTC on the 11th?
My Z3801A went into holdover for the entire period, despite several
satellites being visible. I wonder if this has anything to do with
that malfunctioning WAAS bird that is supposed to be spewing RF
everywhere?
Joe Gray
KA5ZEC
I just bought one of these for cheap: National Instruments GPIB-232CV-A
Please tell me that I didn't do something stupid, and that this is
useable for taking data from an HP 5370A.
Joe Gray
W5JG
___
time-nuts mailing list -- time-nuts@febo.com
To
I had seen that site before. As far as I can tell, that PIC Plot
device is only good for sending data to a plotter/printer. It will not
allow logging data from an instrument.
Joe Gray
W5JG
On Sun, Jun 6, 2010 at 5:30 AM, gandal...@aol.com wrote:
Lovely name isn't it?:-)
Existence of this
Looking at Ulrich's EZGPIB program, it appears that I should be able
to use it. I did find the online manual for the GPIB-232CV-A. While I
wait for the device to arrive, I have some reading to do.
Antonio, just out of curiousity, what software did you use?
Joe Gray
W5JG
On Sun, Jun 6, 2010 at
-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
Behalf Of Joseph Gray
Sent: Sunday, June 06, 2010 12:50 AM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] GPIB to serial
I just bought one of these for cheap: National Instruments GPIB-232CV
My Z3801A has been going into holdover randomly for at least a month.
Sometimes it doesn't happen for many days and other times two days in
a row. The time in holdover is anywhere from under 1/2 hour to several
hours. Last night, it went into holdover again and has been that way
for over 20 hours.
As asked by another, please post a PDF of the schematic. I don't have
any software installed that can read the files you posted.
Joe Gray
W5JG
On Sun, Jun 27, 2010 at 3:54 PM, Magnus Danielson
mag...@rubidium.dyndns.org wrote:
On 06/26/2010 09:11 AM, Richard H McCorkle wrote:
Fellow
I'm just a hobbyist and have a lesser understanding of this stuff than
yourself. I'm interested to hear more about your project and also the
PICTIC+ II that is mentioned on the web page. Some specs would be nice
and if you have any type of user manual, that would even be better. If
a kit is in the
Message
From: Joseph Gray jg...@zianet.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, June 27, 2010 6:01:28 PM
Subject: Re: [time-nuts] PICTIC II
As asked by another, please post a PDF of the schematic. I don't have
any software installed
Any chance that someone could purchase a small quantity from Arrow
Germany so Stanley could include them with the boards we ordered?
Extra payment for the chips, of course.
Joe Gray
W5JG
On Fri, Jul 9, 2010 at 7:21 PM, Richard H McCorkle
mccor...@ptialaska.net wrote:
Time-Nuts,
When the
http://www.futurlec.com/SMD_Adapters.shtml
Joe Gray
W5JG
On Fri, Jul 9, 2010 at 9:06 PM, Tom Clifton kc0...@yahoo.com wrote:
Would something like eBay 180460919851 be a suitable adaptor? The
description
says that it takes .1 header pins on .3 centers 'ready for socket insertion'.
I'm sure
Same ebay seller, different layout.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=18046092rvr_id=crlp=1_263602_263622UA=%3F*%3F%3FGUID=7c4b40741290a0b3f8f587f5ff797212itemid=18046092ff4=263602_263622
Joe Gray
W5JG
On Fri, Jul 9, 2010 at 9:06 PM, Tom Clifton kc0...@yahoo.com wrote:
Ok guys, it has been sitting on my floor far too long and I don't know
when I'll get around to working on it. When I last messed with it, I
went through quite a few of the performance tests and IIRC, most
passed. It measures frequency ok, but it's off a bit on TI
measurements. I intended to open
Without naming names, I want to suggest that if anyone on this list is
going to ship IC chips in the future (DIP in particular), that they
either use the hard plastic tube the chips come in, or put the chips
inside a box. Antistatic foam inside a padded envelope results in very
flat pancakes. Just
This has to be the coolest POV clock ever:
http://www.elektronika.ba/779/pov-propeller-clock-build/
Joe Gray
W5JG
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
This is not strictly Time Nuts, but it is about a crystal oscillator that
needs some temperature compensation, or something. Please ignore this
posting if you like. In fact, so as not to clutter up the list, it would be
best to email me directly about this.
I have an old AM transmitter that has
Can you show some pictures of the oscillator?
The wiring is point-to-point, so I don't think a picture is going to tell
you much.
Is there a tunable inductor in the oscillator circuit?
As I mentioned, nothing tunable there.
Who makes the unit?
It is an LPB RC-6A carrier current AM
Charles, you obviously are familiar with this transmitter. You don't happen
to know where I can get a schematic, do you?
Joe
On Fri, Jun 21, 2013 at 5:07 AM, Charles P. Steinmetz
charles_steinm...@lavabit.com wrote:
Joe wrote:
I have an old AM transmitter that has three 6AL11 compactrons.
Otherwise you might just as well lock it up instead.
Hmm, a 1970 vintage tube transmitter with a GPSDO frequency lock :-)
Thanks to everyone for the suggestions. I will spend more time with this
rig and see what works.
Joe Gray
W5JG
___
time-nuts
More goodies from QST. Attached is an article about the very first ARRL
Frequency Measuring Test.
At just over 2 MB, that attachment was too big for the list. Find it here
for a short while:
https://dl.dropboxusercontent.com/u/19599147/QST%20Sep%201931%20-%20FMT.pdf
And while I'm at it, here
That PDF shows 2.4 MB on this end. I guess the MIME encoding really bloats
it.
Joe
On Fri, Jun 21, 2013 at 10:50 PM, Joseph Gray jg...@zianet.com wrote:
Tom,
Thanks, but I already reposted with links to that PDF and a followup. Feel
free to post a permanent copy of both. I will delete
attachment was 3.4 MB (too large for the list) so I put a copy
here:
www.leapsecond.com/tmp/1931-Sep-QST-FMT.pdf
/tvb
- Original Message -
From: Joseph Gray
To: Discussion of precise time and frequency measurement
Sent: Friday, June 21, 2013 7:26 PM
Subject: The first FMT
More goodies
Burt,
Thanks for the information. I thought that the tolerance was supposed to
100 Hz, as You said. As far as I know, this is the original crystal that
came with the rig when NMSU bought it. I will spend more time working with
the rig this weekend.
I am looking for a solid state LPB transmitter,
1 - 100 of 508 matches
Mail list logo