Looks like I can get the 74AC161 in DIP from Mouser. Thanks to everyone for the suggestions. I still like DIP for prototyping on breadboards.
Joe Gray W5JG On Fri, Nov 7, 2014 at 4:45 PM, Alex Pummer <[email protected]> wrote: > > > check if you could get a 74AC161, which could be connected to divide by 5 > at 125 MHz see here http://ecee.colorado.edu/~mcleod/pdfs/IADE/references/ > 74AC161.pdf to be sure to work at 125MHz run with 5,5 to 6V... > > 73 > Alex > > > > On 11/7/2014 1:12 PM, Joseph Gray wrote: > >> I need to divide a 125 Mhz clock by five. I have looked on Mouser and >> every >> chip I find is either obsolete or in SMT. Can anyone recommend a chip that >> is fast enough and comes in DIP? >> >> Joe Gray >> W5JG >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/ >> mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
