Quad Driven Mixer 5 to 10 MHz Doubler Atricle
Hello,
I have a printout / .pdf file / about this article.
Please contact me off lone the I will send as an attached file.
Rgds Ernie.
-Original Message-
From: time-nuts-request time-nuts-requ...@febo.com
To: time-nuts
Hi,
I am interested a complete KIT ready made and tested. Also if this version is
not available then just the simple KIT including PCB...parts and so on. PIC
programmed.
Rgds Ernie.
-Original Message-
From: time-nuts-request time-nuts-requ...@febo.com
To: time-nuts
Hi Jason,
I figured out a different pin assignments
hold the PCB so that the SMA antenna connector is looking to right and under
the PCB.
open- 1 2- Ant powerpresently connected to pin nbr 4
TX- 3 4- Main power +3 volt
RX- 5 6- 1PPS
open- 7 8-
Hi,
I have a few of this GPS board / iTrax130 / but unable to figure out the pin
assignment...it has 8pins on the board and somebody told me it is same as the
Trimble Resolution-T but seems to me it is not .
Any help?
Thanks a lot in advance.
Ernie.
-Original Message-
Hi Bert,
I would appreciate your info/experience about the GPSDO and using this GPS
receiver module...if this gives any additional preciosity of the present known
system...or what kind of special data from the receiver improve the GPSDO
parameters..
Just found recently that the
Hello,
Just got this board from a Chinese ebayer, but unable to find any document
about the
pin-assignment.
Anybody can help...
Many thanks and brgds,
Ernie.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
TEST
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hi Jim,
here is the typeSanyo ML621 ML 621 Rechargeable 3V cmos Backup BatteryNEW!
available on ebay..
best regards,
Ernie. HG5ED.
-Original Message-
From: Jim Miller j...@jtmiller.com
To: time-nuts time-nuts@febo.com
Sent: Sat, Apr 5, 2014 1:04 pm
Subject: Re:
Hi Anders,
please contact me offline and I will send you a copy of the QEX article.
Rgds Ernie.
-Original Message-
From: Mike George mgeo...@tuffmail.us
To: time-nuts time-nuts@febo.com
Sent: Fri, Mar 28, 2014 7:43 pm
Subject: Re: [time-nuts] Using GPS to Fine Tune a Rubidium
Hi Mike,
your msg is on the list.
Rgds Ernie.
-Original Message-
From: mike cook michael.c...@sfr.fr
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Tue, Jan 28, 2014 12:14 pm
Subject: [time-nuts] test after email address change and repost of PRS10
Hi,
try this link
http://217.34.103.131/products/Transformers.shtml
Rgds Ernie.
-Original Message-
From: cdelect cdel...@juno.com
To: time-nuts time-nuts@febo.com
Sent: Tue, Jan 28, 2014 7:28 pm
Subject: [time-nuts] Mini Circuits RF TX question
Hi,
Does anyone know
11 matches
Mail list logo