Re: [time-nuts] nuts about position

On Wed, 25 Apr 2018 18:02:53 -0400, time-nuts-requ...@febo.com wrote: > time-nuts Digest, Vol 165, Issue 50 > > Message: 3 > Date: Wed, 25 Apr 2018 10:19:38 -0500 > From: Dana Whitlow > To: Tom Van Baak , Discussion of precise time and >

Re: [time-nuts] Slightly OT: interest in a four-output, > ultra-low jitter, synthesizer block?

On Thu, 25 Jan 2018 21:13:44 -0500, time-nuts-requ...@febo.com wrote: > > Message: 2 > Date: Thu, 25 Jan 2018 16:16:59 -0500 > From: John Ackermann N8UR > To: time-nuts@febo.com > Subject: Re: [time-nuts] Slightly OT: interest in a four-output, > ultra-low jitter,

Re: [time-nuts] AM vs PM noise of signal sources

> -- > > Message: 2 > Date: Sat, 6 Jan 2018 09:19:31 -0500 > From: Bob kb8tq > To: Discussion of precise time and frequency measurement > > Subject: Re: [time-nuts] AM vs PM noise of signal sources > Message-ID:

Re: [time-nuts] AM vs PM noise of signal sources

signal sources > Message-ID: <d286e789-d466-ed27-d436-d2bdbdb30...@rubidium.dyndns.org> > Content-Type: text/plain; charset=utf-8 > > Joseph, > > On 01/05/2018 09:16 PM, Joseph Gwinn wrote: >> On Fri, 05 Jan 2018 12:00:01 -0500, time-nuts-requ...@febo.com wrote: >

Re: [time-nuts] AM vs PM noise of signal sources

On Fri, 05 Jan 2018 12:00:01 -0500, time-nuts-requ...@febo.com wrote: > Send time-nuts mailing list submissions to > time-nuts@febo.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > or, via email, send a

Re: [time-nuts] Machining some aluminum help!

ng formed. Joe Gwinn > Content by Scott > Typos by Siri > >> On Jul 29, 2017, at 6:41 PM, Joseph Gwinn <joegw...@comcast.net> wrote: >> >>> On Sat, 29 Jul 2017 12:00:02 -0400, time-nuts-requ...@febo.com wrote: >>> Send time-nuts mailing list submissions to

Re: [time-nuts] Machining some aluminum help!

On Sat, 29 Jul 2017 12:00:02 -0400, time-nuts-requ...@febo.com wrote: > Send time-nuts mailing list submissions to > time-nuts@febo.com > > Message: 7 > Date: Fri, 28 Jul 2017 14:11:09 -0700 > From: "Gary E. Miller" > To: Discussion of precise time and frequency

Re: [time-nuts] Machining some aluminum help!

On Fri, 19 May 2017 12:00:01 -0400, time-nuts-requ...@febo.com wrote: > Re: [time-nuts] Machining some aluminum help! It's much easier to use thread-forming taps in aluminum than thread cutting, and the threads are far stronger. Blind holes are not as large a problem. Lubricate with soft wax,

Re: [time-nuts] over-determined clock solution

On Sat, 25 Jun 2016 22:00:25 -0400, time-nuts-requ...@febo.com wrote: > > Message: 3 > Date: Sat, 25 Jun 2016 10:07:30 -0400 > From: Steve > To: Discussion of precise time and frequency measurement > > Subject: [time-nuts] over-determined clock

[time-nuts] Conjugate Regenerative Frequency Divider with Offset Frequency

After a recent Time Nuts thread on Coherent Regenerative Frequency Dividers, I did a small patent search, from curiosity, and came upon a interesting patent granted last year. It is US 9,112,483 to Peter L Delos et al, titled "Offset Regenerative Frequency Divider". Use Google Patents to

[time-nuts] Gipsy-Oasis can track continental drift

On Mon, 30 Nov 2015 12:00:01 -0500, time-nuts-requ...@febo.com wrote: > Message: 2 > Date: Sun, 29 Nov 2015 08:31:18 -0800 > From: "Tom Van Baak" > To: "Discussion of precise time and frequency measurement" > > Subject: Re: [time-nuts] Einstein

Re: [time-nuts] IRIG-B audio decoder circuits and ICs sought

Message-ID: 55617edb.5070...@nic.fi Content-Type: text/plain; charset=UTF-8; format=flowed Joseph Gwinn kirjoitti: When I last used IRIG-B005, the vendor (Symmetricom?) said it was good for a few meters only on shielded twisted pair. I recall that the handling of shield grounds

[time-nuts] IRIG-B audio decoder circuits and ICs sought

: [time-nuts] IRIG-B audio decoder circuits and ICs sought Message-ID: CAJ_qRvZ+1Zep_Wx8k+o-qY=h3dxgdnlcpj20tuaw_ncffmi...@mail.gmail.com Content-Type: text/plain; charset=UTF-8 On Thu, May 21, 2015 at 10:22 PM, Joseph Gwinn joegw...@comcast.net wrote: The definition of good here

Re: [time-nuts] IRIG-B audio decoder circuits and ICs sought

Multiple answers interspersed below. Joe On Fri, 22 May 2015 12:00:02 -0400, time-nuts-requ...@febo.com wrote: Send time-nuts mailing list submissions to Message: 5 Date: Thu, 21 May 2015 22:22:12 -0400 From: Joseph Gwinn joegw...@comcast.net To: time-nuts@febo.com Subject: Re: [time

Re: [time-nuts] IRIG-B audio decoder circuits and ICs sought

...@rubidium.se Subject: Re: [time-nuts] IRIG-B audio decoder circuits and ICs sought -- Joe, On 05/19/2015 03:51 PM, Joseph Gwinn wrote: I'm studying up on how IRIG-B decoder circuits work. What are the good approaches, the bad approaches, especially in the presence

Re: [time-nuts] IRIG-B audio decoder circuits and ICs sought

On Wed, 20 May 2015 12:00:01 -0400, time-nuts-requ...@febo.com wrote: Message: 1 Date: Wed, 20 May 2015 09:19:47 -0500 From: Graham / KE9H ke9h.gra...@gmail.com To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: Re: [time-nuts] IRIG-B audio decoder

[time-nuts] IRIG-B audio decoder circuits and ICs sought

I'm studying up on how IRIG-B decoder circuits work. What are the good approaches, the bad approaches, especially in the presence of noise? (I asked on the NTP group, with little result beyond the C/C++ decoder software written for the audio channel of a 1990s Sun workstation, which it ate

Re: [time-nuts] simple explanation of noise spectra with mixing

time-nuts Digest, Vol 128, Issue 1, Message: 8 Date: Sat, 28 Feb 2015 17:46:18 -0800 From: Jim Lux jim...@earthlink.net To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: [time-nuts] simple explanation of noise spectra with mixing, etc.

Re: [time-nuts] lightening protection of a GPSDO system

Time-nuts Digest, Vol 124, Issue 119 On Thu, 27 Nov 2014 11:23:14 -0500, time-nuts-requ...@febo.com wrote: Message: 5 Date: Thu, 27 Nov 2014 09:24:38 + From: Dr. David Kirkby (Kirkby Microwave Ltd) drkir...@kirkbymicrowave.co.uk To: Discussion of precise time and frequency

Re: [time-nuts] GPS antenna in snowy environment (was: LEA-6T Software.)

On Thu, 28 Aug 2014 09:15:18 -0400, time-nuts-requ...@febo.com wrote: Message: 5 Date: Thu, 28 Aug 2014 15:04:36 +0200 From: Attila Kinali att...@kinali.ch To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: [time-nuts] GPS antenna in snowy

Re: [time-nuts] GPSDO simulation tool

On Sun, 23 Mar 2014 21:33:07 -0400, time-nuts-requ...@febo.com wrote: Message: 1 Date: Mon, 24 Mar 2014 00:48:01 +0100 From: Magnus Danielson mag...@rubidium.dyndns.org To: time-nuts@febo.com Subject: Re: [time-nuts] GPSDO simulation tool Jim, On 23/03/14 16:00, Jim Miller wrote: To

Re: [time-nuts] time-nuts Digest, Vol 112, Issue 65

On Thu, 21 Nov 2013 09:40:44 -0500, time-nuts-requ...@febo.com wrote: time-nuts Digest, Vol 112, Issue 65 Message: 8 Date: Thu, 21 Nov 2013 06:40:14 -0800 From: Tom Van Baak t...@leapsecond.com To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: Re:

Re: [time-nuts] Strange 100ns jumps on Motorola M12+T

On Thu, 21 Nov 2013 03:55:57 -0500, time-nuts-requ...@febo.com wrote: time-nuts Digest, Vol 112, Issue 64 Message: 6 Date: Thu, 21 Nov 2013 10:49:43 +0200 From: Stephan Sandenbergh ssandenbe...@gmail.com To: Discussion of precise time and frequency measurement time-nuts@febo.com

Re: [time-nuts] Strange 100ns jumps on Motorola M12+T

On Tue, 19 Nov 2013 08:51:32 -0500, time-nuts-requ...@febo.com wrote: (time-nuts Digest, Vol 112, Issue 59) Message: 1 Date: Tue, 19 Nov 2013 13:17:26 +0200 From: Stephan Sandenbergh ssandenbe...@gmail.com To: Discussion of precise time and frequency measurement time-nuts@febo.com

Re: [time-nuts] exponential+linear fit

Re: time-nuts Digest, Vol 111, Issue 21 On Sat, 05 Oct 2013 11:54:08 -0400, time-nuts-requ...@febo.com wrote: Message: 6 Date: Sat, 05 Oct 2013 08:53:52 -0700 From: Jim Lux jim...@earthlink.net To: time-nuts@febo.com Subject: Re: [time-nuts] exponential+linear fit Message-ID:

Re: [time-nuts] exponential+linear fit

On Fri, 04 Oct 2013 14:30:40 -0400, time-nuts-requ...@febo.com wrote: -- Message: 4 Date: Fri, 04 Oct 2013 10:38:07 -0700 From: Jim Lux jim...@earthlink.net To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: [time-nuts]

Re: [time-nuts] sub-minute time-precision in court-case

Re: time-nuts Digest, Vol 110, Issue 13 On Tue, 03 Sep 2013 19:52:17 -0400, time-nuts-requ...@febo.com wrote: Date: Wed, 04 Sep 2013 00:27:18 +0200 From: Magnus Danielson mag...@rubidium.dyndns.org To: time-nuts@febo.com Subject: Re: [time-nuts] sub-minute time-precision in court-case

Re: [time-nuts] Removing goop was: =Re: 10811 Outer oven controller schematic

On Thu, 01 Aug 2013 04:45:14 -0400, time-nuts-requ...@febo.com wrote: Re: time-nuts Digest, Vol 109, Issue 2 Message: 1 Date: Thu, 01 Aug 2013 00:29:06 -0600 From: John Marvin jm-t...@themarvins.org To: time-nuts@febo.com Subject: Re: [time-nuts] Removing goop was: =Re: 10811 Outer oven

Re: [time-nuts] HP Z3801 melted rubber feet. Heads up

time-nuts Digest, Vol 108, Issue 135 On Fri, 26 Jul 2013 18:58:26 -0400, time-nuts-requ...@febo.com wrote: Message: 5 Date: Fri, 26 Jul 2013 18:58:14 -0400 From: paul swed paulsw...@gmail.com To: paul swed paulsw...@gmail.com, Time-nuts time-nuts@febo.com Subject: [time-nuts] HP Z3801 melted

Re: [time-nuts] Speaking of Costas loops (WAAS)

) Message-ID: 51d84c61.3070...@rubidium.dyndns.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed On 07/06/2013 06:29 PM, Joseph Gwinn wrote: Code/Carrier Frequency Coherence: The lack of coherence between the broadcast carrier phase and the code phase shall be limited. The short

Re: [time-nuts] Speaking of Costas loops (WAAS)

Message-ID: 51d74855.9090...@rubidium.dyndns.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed On 07/05/2013 10:39 PM, Joseph Gwinn wrote: Re: time-nuts Digest, Vol 108, Issue 28 Message: 2 Date: Fri, 05 Jul 2013 09:18:39 -0700 From: Jim Luxjim...@earthlink.net To: time-nuts

Re: [time-nuts] Speaking of Costas loops (WAAS)

Re: time-nuts Digest, Vol 108, Issue 35 On Sat, 06 Jul 2013 12:00:01 -0400, time-nuts-requ...@febo.com wrote: Message: 5 Date: Sat, 06 Jul 2013 08:56:46 -0700 From: Jim Lux jim...@earthlink.net To: time-nuts@febo.com Subject: Re: [time-nuts] Speaking of Costas loops (WAAS) Message-ID:

Re: [time-nuts] Speaking of Costas loops

Re: time-nuts Digest, Vol 108, Issue 28 Message: 2 Date: Fri, 05 Jul 2013 09:18:39 -0700 From: Jim Lux jim...@earthlink.net To: time-nuts@febo.com Subject: Re: [time-nuts] Speaking of Costas loops Message-ID: 51d6f1df.9090...@earthlink.net Content-Type: text/plain; charset=ISO-8859-1;

Re: [time-nuts] Looking for an old french dissertation

On Sat, 15 Jun 2013 09:49:11 -0400, time-nuts-requ...@febo.com wrote: -- Message: 3 Date: Sat, 15 Jun 2013 08:59:40 +0200 From: Attila Kinali att...@kinali.ch To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: Re:

Re: [time-nuts] MASER at room temperature (Timeok)

From vol 102 issue 65 Message: 1 Date: Thu, 17 Jan 2013 14:24:30 +0100 From: Timeok tim...@timeok.it To: time-nuts@febo.com Subject: [time-nuts] MASER at room temperature Message-ID: 5bb3e02588162d8d8508b7a2d871b...@www.timeok.it Content-Type: text/plain; charset=UTF-8; format=flowed

[time-nuts] This week's weather forecast

attachment: 29336784.jpg___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.