===
time-nuts@febo.com was invited to join Facebook by Stanley Reynolds. If you
don't want to receive these emails from Facebook in the future, please follow
the link below to unsubscribe.
http://www.facebook.com/o.php?k=74ab50u=1348233827mid=3b6b518G505c6a63G0G8
Learn more about this email: http
Wonder if the clients of this network reduce power as cell phones do to
increase
battery life and reduce interference or they will use a dish on the fixed
clients, not that would help with interference from the sat. The web site reads
like the sat will distribute the internet signal direct to
Yes, boards and parts, please email me off list.
Stanley
snip
Speaking of PICTIC II's. Great project, but I had originally decided not to go
that route as list members were indicating that 5370Bs were to be picked up for
200 bucks. Not so in France I am afraid. I have not been able to find
Looks like a upside down wedding cake a very familiar shape for pilots, ground
receivers may not be effected if beyond the horizon of the testing device if
it is at sea level. Yes this is just a guess on my part.
Stanley
- Original Message
From: Robert Darlington
Don't guess it would help if I open my HP 54501A and backup the eproms ?
Stanley
- Original Message
From: paul swed paulsw...@gmail.com
To: Time-nuts time-nuts@febo.com
Sent: Sun, December 26, 2010 4:24:45 PM
Subject: [time-nuts] HP 54100 scope eproms images to Diddiers site Ko4bb
Try:
www.n4iqt.com/DC468simul
Stanley
- Original Message
From: jim s j...@jwsss.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Thu, December 23, 2010 8:53:56 PM
Subject: Re: [time-nuts] Truetime DC468 GOES simulator in Diddiers upload
folder
Windows XP – solutions
http://www.bmw-world.ro/?p=173
Windows 7
http://www.windowsitpro.com/article/product-review/how-do-i-disable-mouse-detection-on-a-com-port-for-ups-usage-.aspx
Stanley
- Original Message
From: Michael Baker mp...@clanbaker.org
To: time-nuts@febo.com
Sent: Mon,
A loop with preamp or an active antenna (whip with preamp). Any Loran you
receive will be DX as the US chains were turned off to pay for the tax cut :-)
Astrons need a external frequency standard to work does your receiver have a
model/Brand ?
Stanley
- Original Message
From:
184.50 CHF/chip = 190 usd, what is wrong with this world the overprinted usd
should not be on par
with CHF that is the Swiss francs correct ?
Stanley
- Original Message
From: Javier Serrano javier.serrano.par...@gmail.com
To: Discussion of precise time and frequency measurement
Lucent Cell phone site GPSDO output 15 Mhz.
Stanley
- Original Message
From: Magnus Danielson mag...@rubidium.dyndns.org
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Mon, December 13, 2010 6:10:14 PM
Subject: [time-nuts] Where 15 MHz?
Fellow
-nuts@febo.com
Sent: Mon, December 13, 2010 6:26:55 PM
Subject: Re: [time-nuts] Where 15 MHz?
On 12/14/2010 01:24 AM, Stanley Reynolds wrote:
Lucent Cell phone site GPSDO output 15 Mhz.
Yes, that I already know, but for what kind of equipment was it meant?
Cheers,
Magnus
Try www.n4iqt.com/books
I like the first part and the last part the math in the middle is over my head
:-)
Stanley
- Original Message
From: Richard W. Solomon w1...@earthlink.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, December 12, 2010
Past week wwvb propagation has been very good here in Alabama may be a good
time
to play with some of your wwvb discipline oscillators.
Winter is, of course, the time of best ground-wave propagation from WWVB, so
this is about as good as it’s ever going to get. from link :
it
on a simple travel clock placed up high on a wooden bookshelf. Still
figuring out which times of the year are best.
Jim
On Sunday, 5 December 2010, Stanley Reynolds stanley_reyno...@yahoo.com wrote:
Past week wwvb propagation has been very good here in Alabama may be a good
time
to play
Matt,
As a follow up just ran across this which is good to get started with :
http://www.wriley.com/Examples%20of%201%20PPS%20Clock%20Measuring%20Systems.pdf
In fact Mr. Riley has a very good selection of material at :
http://www.wriley.com/#papers
Stanley
- Original Message
From:
I have been a software hacker for years but have never really done too
much hardware hacking. I have been looking at oxco modules, but the
data sheets of various vendors do not really provide me with a good
basis as to what such an oscillator would provide me. I assume its
just oscillation
No not compatible. But check Paul Swedberg's Loran simulator here:
http://www.n4iqt.com/simloran/
Stanley
- Original Message
From: Perry Sandeen sandee...@yahoo.com
To: time-nuts-requ...@febo.com time-nuts@febo.com
Sent: Sun, October 3, 2010 5:19:02 PM
Subject: [time-nuts] AUSTRON
Depends on which one you have but the one with heat sink fins on the front has
a
adjustment pot under a screw on the front appears as a break in the 3rd fin
from
the left. Don't know about the gold color case one's.
Stanley
- Original Message
From: Perry Sandeen
- Original Message
From: paul swed paulsw...@gmail.com
To: j...@quik.com; Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Sun, October 3, 2010 10:06:40 PM
Subject: Re: [time-nuts] AUSTRON MODEL 2100F Conversion
Won't work completely different. I built a
Yahoo has problems try http://n4iqt.com/simloran/
Stanley
- Original Message
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, October 3, 2010 10:26:37 PM
Subject: Re: [time-nuts] AUSTRON MODEL
On the crazy side another common view object is the lunar laser ranging
retroreflector array. Has been improvements in cost of lasers and telescopes in
the past 41 years and it doesn't appear to be headed for shutdown anytime soon.
Stanley
- Original Message
From: Mark J. Blair
snip
If you have to work with the existing corner cubes, I don't see how to start
with a pulse at one site, bounce it off the moon, and get it back to another
site that isn't nearby.
If you didn't send the pulse it would be hard to time the trip anyway no start
time. But it one site is
How to keep hundreds of miles of copper stable or predict it's delay ?
Stanley
- Original Message
From: J. L. Trantham, M. D. jlt...@att.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Fri, September 10, 2010 6:44:35 PM
Subject: Re: [time-nuts]
-nuts-boun...@febo.com] On
Behalf Of Stanley Reynolds
Sent: Friday, September 10, 2010 7:13 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Timing Distribution in Mountainous Terrain
How to keep hundreds of miles of copper stable or predict it's delay ?
Stanley
Does the GPS backup include other sats ? As long as all sites could see the
same
sat then using it as a standard they would drift together.
Stanley
- Original Message
From: Ralph Smith ra...@ralphsmith.org
To: Discussion of precise time and frequency measurement time-nuts@febo.com
I not able to organize a parts order but did notice a break in price on the
transformers at mini-circuits at quantity 10, went from $9.95 to $2.29 this
maybe a mistake, as this is the only part that had such a break.
Stanley
___
time-nuts mailing
Yes we do need leap-Centimeters for MSL :-D
Stanley
snip
Some bureaucrat adjusted MSL by 1.3m quietly because it would be
politically incorrect to admit that the globe was actually warming.
We have some idea of how time is adjusted for GPS. Does anyone know
how and when MSL is adjusted? I
: Stanley Reynolds
stanley_reyno...@yahoo.com
To: time-nuts@febo.com
Sent: Saturday, September 04, 2010 3:28 PM
Subject: [time-nuts] Small DMTD project PCBs Group Buy Update,boards are here !
Packing them up to take to the PO.
Paypal to stanley_reyno...@yahoo.com
$9.50 per board $47.50 for the set
] Small DMTD project PCBs Group Buy Update, boards are
here !
Hi Stanley,
I'm very interested in building this project. Do you have documentation
online? I'd like to read through it then send you the $47 for the boards.
Thanks,
Bob
On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds stanley_reyno
pressure was used to push blood
cells to the center of a capillary tube) but all I really did was layout.
No software for me on that one.
-Bob
On Tue, Sep 7, 2010 at 11:40 AM, Stanley Reynolds
stanley_reyno...@yahoo.com wrote:
Yes this file:
http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf
Test the box minus the screws in a microwave oven if the material heats up then
it is not transparent. May not be the plastic but a pigment that was added to
give the box it's color.
Stanley
- Original Message
From: Peter Krengel krengelda...@gmx.de
To: time-nuts@febo.com
Sent: Sun,
The plastic may also function as a lens particularly the corners of the box
see:
http://authors.library.caltech.edu/10409/1/ZMUieeetmtt92.pdf
figure 2 shows a polyethylene lens.
Stanley
- Original Message
From: Peter Krengel krengelda...@gmx.de
To: time-nuts@febo.com
Sent: Sun,
I would try a search for cake pans in the archive. Large funnel inverted to
cover.
http://www.mail-archive.com/time-nuts@febo.com/msg27517.html
http://www.mail-archive.com/time-nuts@febo.com/msg27561.html
Stanley
- Original Message
From: Peter Krengel krengelda...@gmx.de
To:
Packing them up to take to the PO.
Paypal to stanley_reyno...@yahoo.com
$9.50 per board $47.50 for the set of 5.
If you mail your payment to:
Stanley Reynolds
225 Alpine Street
Birmingham, AL 35210
then $9 per board $45 for the set of 5.
Yes I have plenty of extra boards.
Notice arrow has a good
ROHN 9H50 34 Foot Telescopic TV Wireless Antenna Push Up Mast
http://www.3starinc.com/rohn_telescopic_masts.html
I don't know this vendor just the first that came up in google.
Stanley
- Original Message
From: Charles P. Steinmetz charles_steinm...@lavabit.com
To: Discussion of
Picked that one as it fit the 3 wide request and is UPS shippable. The
brackets
and ground plate were also available.
Stanley
- Original Message
From: J. Forster j...@quik.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Thu, September 2, 2010
8:49:24 PM
Subject: Re: [time-nuts] Freestanding mast
Make sure you are sitting down when you check the shipping
charges.
73, Dick, W1KSZ
-Original Message-
From: Stanley Reynolds stanley_reyno...@yahoo.com
Sent: Sep 2, 2010 9:16 PM
To: Discussion of precise time and frequency
Boards will be here Friday September 3.
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
If you are looking for a project vs a turn key solution check out :
http://www.febo.com/time-freq/ntp/soekris/index.html
Stanley
- Original Message
From: Colby Gutierrez-Kraybill co...@astro.berkeley.edu
To: time-nuts@febo.com
Sent: Tue, August 31, 2010 11:10:47 AM
Subject:
I would use a surplus thunderbolt vs the HP Z3801A GPS disciplined oscillator
for cost reasons but would check to make sure a working driver exist for which
ever gps receiver is connected to the RS232 port. Thunderbolt would feed the
clock-block in either case. This is on my list to do but I'm
- Original Message
From: Neville Michie namic...@gmail.com
snip
It seems strange, with all those satellites, whose position is known with such
accuracy,
that we can not get an accurate azimuth, but then we do not have a sighting
device to observe a referred object or satellites.
You can use www.timenuts.com to reach my forum, I can be reached here or there
and several other places, all are welcome.
Stanley
- Original Message
From: Steve Rooke sar10...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wed, August 25,
Not cheap but VOR was used when I was flying.
http://en.wikipedia.org/wiki/VHF_omnidirectional_range
Stanley
- Original Message
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wed, August 25, 2010 9:25:31 PM
Subject: Re:
google Icom IC-A24
Stanley
- Original Message
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wed, August 25, 2010 9:25:31 PM
Subject: Re: [time-nuts] Slightly OT - GPS-Based Accurate Direction Finding
Hi
GPS is not very
You still need to DF the VOR station to get your direction. guess any radio
that
receives 108 to 117 MHz is good for that.
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Started setting up a time-nuts board at:
http://forums.n4iqt.com/modules.php?name=Forums
Need ideas for topics.
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and
:36:24 PM
Subject: Re: [time-nuts] Bulletin Board / Forum
Whats the reason and motive for this ?
On 8/24/2010 8:50 PM, Stanley Reynolds wrote:
Started setting up a time-nuts board at:
http://forums.n4iqt.com/modules.php?name=Forums
Need ideas for topics.
Stanley
and respected internationally, is a
form
of prior art and may well constitute a form of copyright. I would suggest
that not only is it proper to ask him his feelings but may require his
permission
for use of his list moniker.
BillWB6BNQ
Stanley Reynolds wrote:
Started setting up a time
http://cgi.ebay.com/5-pcs-N-Channel-Transistor-2SK369-K369-Low-Noise-BL-/150471697656
Stanley
- Original Message
From: ewkeh...@aol.com ewkeh...@aol.com
To: time-nuts@febo.com
Sent: Sat, August 21, 2010 6:07:25 AM
Subject: Re: [time-nuts] Phase noise measurement (was - no subject)
PICTIC II option for the expanded DMTD.
73 Brice KA8MAV
- Original Message -
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Thursday, August 19, 2010 12:27 AM
Subject: Re: [time-nuts] Small DMTD project PCBs
My crystal ball indicates the comparison is used Lpro and used Tbolt, original
poster wanted to know why expend $100 for Tbolt when Lpro is cheaper.
Stanley
From: Dan Rae dan...@verizon.net
To: Discussion of precise time and frequency measurement
Will place order in the next few days please email me with any suggested
changes
to the mixer or DDS boards.
Stanley
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: time-nuts@febo.com
Sent: Sun, August 15, 2010 3:14:50 PM
Subject: [time-nuts] Small DMTD
Synergy Motorola info here :
http://www.wa5rrn.com/GPS%20Other/Motorola%20M12/5vltb.pdf
UT+ Oncore R5xxxU Customer Specials
trimble resolution t
http://trl.trimble.com/docushare/dsweb/Get/Document-183796/13441+Resolution+FA2.pdf
The small DMDT uses no interpolator and a 50 Mhz derived from the 10Mhz
reference
Software just use the counter value or Interpolator gain 0
Hardware looking at page 2 of the schmatic all you need is C1,C2,C3 and U1 on
that page
do not install:
U3,U5,U8,U10
R1 - R23
to do a group
purchase?
Thanks!
73 Brice KA8MAV
- Original Message - From: Stanley Reynolds
stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wednesday, August 18, 2010 4:50 PM
Subject: [time-nuts] Small DMTD project PCBs Group
) needed to make the dmtd setup work?
Thanks,
Eric
Sent from my Banana Jr. mobile device
On Aug 18, 2010, at 1:50 PM, Stanley Reynolds stanley_reyno...@yahoo.com
wrote:
Will place order in the next few days please email me with any suggested
changes
to the mixer or DDS boards.
Stanley
Their forums are good source of info, I don't think the student version is
limited but you can ask there : http://forums.ni.com/
In a past life I was a programmer but found the virtual instrument hard to
understand, could be it's too easy.
CTL T which brings up two windows was one key,
From: Don Latham d...@montana.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Mon, August 16, 2010 12:56:48 AM
Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy
Thank You, for the source.
This morning I have added
- Original Message
From: Steve Rooke sar10...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, August 15, 2010 7:05:40 AM
Subject: Re: [time-nuts] PicTic Data
On 15 August 2010 17:01, Stanley Reynolds stanley_reyno...@yahoo.com wrote
Files here : www.n4iqt.com/BillRiley
removed the spaces in the file names but they are still a mix of upper and
lower
case
still checking them to make sure they are OK
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Files here www.n4iqt.com/BillRiley
If you rename the PCB and or the SCH files you will need to relink them in the
expressPCB program. The mixer board has a netlink warning but this maybe on
purpose as it is with the ground and maybe the isolation mentioned in the notes.
Stanley
-
Any interest in boards at 8 USD each as before ?
The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS
board.
5 boards plus shipping about 47.50 usd
Please email me off list with your interest.
I not sure if using the pictic II vs I board will present problems for the
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, August 14, 2010 7:05:35 AM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
Heathkid
Hi
This isn't my design
temperature of
the PICTIC II?
Thanks.
73 Brice KA8MAV
- Original Message - From: Stanley Reynolds
stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Saturday, August 14, 2010 10:43 AM
Subject: Re: [time-nuts] What's the latest correct
Duplicate message without in-line picture.
- Forwarded Message
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, August 14, 2010 11:41:36 AM
Subject: Re: [time-nuts] What's the latest correct PICTIC
My last two posts made it to the Archives at febo.com and I guess other members
mail boxes, but not my in box or spam folder. Just wonder why as this doesn't
seem to happen with time-nuts posts by others ? Is this a yahoo mail problem ?
Stanley
___
Attached is my first pictic ii data. It is the difference between the PPS
output
of a Trak 8820 and a Odetics Comsync. Turned on the counter display at the end
of the run to show that most of the data was the interpolars.
Stanley
001073
001075
001072
001072
001066
http://risorse.dei.polimi.it/digital/pubblications.html
then scroll down
Stanley
- Original Message
From: Bruce Griffiths bruce.griffi...@xtra.co.nz
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, August 14, 2010 7:05:03 PM
Subject: [time-nuts]
time interval interpolation technique
Scroll to the bottom of the first list, or search for 'LC tanks'
Don't know why Bruce's link doesn't work, but I get 404 - file not found.
Bill Hawkins
-Original Message-
From: Stanley Reynolds
http://risorse.dei.polimi.it/digital
oh well no credit for me, but what happened to the missing space when so many
other spaces made it thru as %20 ?
- Original Message
From: Hal Murray hmur...@megapathdsl.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, August 14, 2010 8:27:09
My guess as to what the data may indicate is performance of the 10 Mhz 20PPM
PICTIC internal oscillator, need to repeat test with precision 10Mhz and auto
calibrate off. Fatness of the line/width maybe PICTIC error. Note graph seems
to
show me leaving the room and returning via the outside
One problem is the door opens don't move in the same direction, a rain storm
did
cool things off outside during the test but it was still warmer outside both
times.
I will place a box over the Pictic and rerun the test.
Stanley
- Original Message
From: Stanley Reynolds
-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
Behalf Of Stanley Reynolds
Sent: Saturday, August 14, 2010 7:12 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] PicTic Data
My guess as to what the data may indicate is performance
14, 2010 11:46:49 PM
Subject: Re: [time-nuts] PicTic Data
Here's your first run in red, compared to your second one in green...
-- john, KE5FX
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
Behalf Of Stanley Reynolds
Sent: Saturday, August
From: Alan Melia alan.me...@btinternet.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Tue, August 10, 2010 6:01:59 AM
Subject: Re: [time-nuts] Remove Pictic boards from envelopes
Could
there maybe be a thin flux
Stanley time would have 10 seconds per minute, 10 minutes per hour, 10 hours
per
day ... No need for leap seconds if we remove all connections to celestial
movements. To avoid any politics's in picking a starting point now would be
zero
and the past measured as negative time.
Please remove Pictic boards from envelopes when you receive them.
Received a report that the tinning on the bottom of the board was discolored
perhaps due to some contamination in the envelope. Will wrap boards in plastic
wrap in the future.
Stanley
Let me see first it was :
Melamine in pet
The boards were PB free so the finish is a flat silver . My thinking is the
envelopes are acidic and any moisture would cause a reaction. The boards were
shipped to me vacuum sealed in plastic 25 boards per pack. They were not brown
or discolored when I put them in the envelopes so what ever
for your time and efforts. I know what they are in
quantities of 50. I'll pay $2 each. That should make it worth while... with
fees, etc... I'll send you $25 for 10 of them.
Will you do this?
73 Brice KA8MAV
- Original Message - From: Stanley Reynolds
stanley_reyno...@yahoo.com
I have had good luck with Quest they are showing stock.
www.questcomp.com
They do have a $25 min.
Stanley
- Original Message
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, August 1, 2010 4:20:44 PM
Subject: Re:
- Original Message
From: Hal Murray hmur...@megapathdsl.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Thu, July 29, 2010 12:48:55 AM
Subject: Re: [time-nuts] Updated Shera controller
stanley_reyno...@yahoo.com said:
Full circle back to the
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Thursday, July 29, 2010 8:11:46 AM
Subject: Re: [time-nuts] Please send your paypal for PicTic II PCBs
Op 22 jul 2010, om 16:37 heeft Stanley Reynolds het volgende geschreven:
Just tried to invoice the ones
Full circle back to the software, the number of units sold, the cost per hour
and time to complete project would determine the software cost. Would not
surprise me if the software would be the biggest expense till you break the
1000
unit mark unless the cost per hour was very low. As a
Here: www.n4iqt.com/picticii/assembled
I think it would be possible to use the side adjust square trimmers but not the
rectangular ones as they are too big and the holes would be too far apart to
mount them close to the board. The top adjust would be the first choice because
they would be
R25 a 10 K resistor only used with the TTL computer interface option, not used
with the RS232 chip, is listed twice as 1% or 5% either will work but you don't
need both.
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
My attempt to understand your diagram, not sure about how the quadrature hybrid
is connected.
Stanley
- Original Message
From: J. Forster j...@quik.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, July 25, 2010 10:29:23 AM
Subject: Re:
Corrected Drawing.attachment: Jfoster.jpg___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Just tried to invoice the ones not paid yet but paypal doesn't allow enough
time
for me to complete the invoice and thinks it is OK to dump my work up to that
point, note to self sell ebay stock short and use money to hire someone to do
paperwork.
The people in the EU / UK I wanted to ship at
bags for onward despatch.
TTFN,
Peter Vince (England)
On 20 July 2010 23:08, Stanley Reynolds stanley_reyno...@yahoo.com wrote:
Paypal to stanley_reyno...@yahoo.com . Yes I still have extra boards.
Stanley
___
time-nuts mailing list
Bob,
Thank you for the video
Now all we need is a robot and software to filter the jitter from my hands.
Maybe a little less expensive than the da Vinci robot.
http://www.davincisurgery.com/
Stanley
- Original Message
From: Bob Bownes bow...@gmail.com
To: Discussion of precise time
Paypal to stanley_reyno...@yahoo.com . Yes I still have extra boards.
Stanley
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Picture of board here:
www.n4iqt.com/stanley_reynolds/picticii/Picticboard001.JPG
- Original Message
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: time-nuts@febo.com
Sent: Tue, July 20, 2010 5:08:22 PM
Subject: [time-nuts] Pictic II boards are here !
Paypal to stanley_reyno
Corrected link to picture:
www.n4iqt.com/picticii/Picticboard001.JPG
- Original Message
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Tue, July 20, 2010 5:26:44 PM
Subject: Re: [time-nuts] Pictic
Adam,
Cold solder joints on the connector or chip would be my first guess after the
power supply was checked.
Stanley
- Original Message
From: Adam Feigin a...@iis.ee.ethz.ch
To: time-nuts@febo.com
Sent: Sun, July 18, 2010 3:53:36 AM
Subject: Re: [time-nuts] Did my Tbolt die ?
Learning about the differences between families now know why a 74F is not a
substitute for 74AC.
But remembering something I read in Brooks Shera, W5OJM GPSDO notes Take care
about which 4046 chips you use for U1 and U3. The Phillips 74HCT4046 chips
(formerly sold by Radio Shack) are fine. So
Claude,
No problem you are on the list, the 74AC175PC is correct chip, not 74ACT175PC.
Stanley
- Original Message
From: Claude Houde va2...@aei.ca
To: time-nuts@febo.com
Sent: Tue, July 13, 2010 8:15:25 PM
Subject: [time-nuts] PIC-TIC boards
Hello !
I know I'm a bit late, but is it
I found them yesterday, and they show my order shipped today, let you know when
I receive it.
Stanley
- Original Message
From: Peter Vince pvi...@theiet.org
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Mon, July 12, 2010 2:30:14 PM
Subject:
A order with BIGeSTOCK.com did not work out last week, I think some of these
people don't stock but re-list others stock. In this case they came back with a
price 5 times what they said when I ordered.
Stanley
- Original Message
From: Stanley Reynolds stanley_reyno...@yahoo.com
Very Nice, but way too neat, tell me you cleaned up for the pictures.
Stanley
- Original Message
From: ulm...@vaxman.de ulm...@vaxman.de
To: TIME-NUTS@febo.com
Sent: Sun, July 11, 2010 2:40:01 PM
Subject: [time-nuts] Rubidium oscillator controlled clock
Dear list members -
a couple
A terminal emulator like PuTTY is a good starting point to talk to PICTIC. But
I
was thinking of a GUI that would appear like a virtual instrument. Buttons
instead of the @ commands, display of various settings and data. My language of
choice is Basic looking at Just Basic now. Wonder if
1 - 100 of 344 matches
Mail list logo