Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd pictic as an option.
If you had another offset source no need for the DDS board. If you have Time interval counters that are interfaced to a computer then no need for the PicTic boards. Guess you could use the DDS board for other projects also. Each mixer board has two identical channels so it would be possible to use just one in some applications. I 'm offering the boards in any combination. Stanley ________________________________ From: Eric Garner <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Wed, August 18, 2010 10:58:36 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Just to be clear, the ~48 dollar total includes all of the required boards( minus components) needed to make the dmtd setup work? Thanks, Eric Sent from my Banana Jr. mobile device On Aug 18, 2010, at 1:50 PM, Stanley Reynolds <[email protected]> wrote: > Will place order in the next few days please email me with any suggested >changes > to the mixer or DDS boards. > > Stanley > > > > ________________________________ > From: Stanley Reynolds <[email protected]> > To: [email protected] > Sent: Sun, August 15, 2010 3:14:50 PM > Subject: [time-nuts] Small DMTD project PCBs Group Buy > > Any interest in boards at 8 USD each as before ? > > The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS >board. > > > > 5 boards plus shipping about 47.50 usd > > Please email me off list with your interest. > > I not sure if using the pictic II vs I board will present problems for the > software. > > Would also like to workout any changes to the DDS or Mixer Boards before I >place > > the order. > > Yes I still have PICTIC II boards from the first order and other parts for >them. > > Stanley > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
