Re: [time-nuts] TU60-D120-041 power up

Hello Michael, Re: setting GPS data formats As I mentioned previously, my GPS unit works perfectly with the TAC32 evaluation software. I can see the NMEA sentences on the screen every second. In addition, the 1 pulse-per-second is working, and so is the 10 kHz output. So, I have a working

Re: [time-nuts] TU60-D120-041 power up

sjdeha...@gmail.com said: I think you pointed out that this GPS unit defaults to the Navman Binary mode. I have tried to use HyperTerminal via a serial port and about all I see is @@EA followed by a burst of random characters every second. I tried 4800 and 9600 baud. I would like to be

Re: [time-nuts] TU60-D120-041 power up

I wonder if these are similar to the TU30 series. On those, grounding Pin 7 on J1 would bring the unit up @ 4800 baud NMEA... Mike On 10/22/2014 4:20 PM, Hal Murray wrote: sjdeha...@gmail.com said: I think you pointed out that this GPS unit defaults to the Navman Binary mode. I have tried

Re: [time-nuts] TU60-D120-041 power up

Hello Michael, I apologize for the long delay to your reply. I have spent a lot of time upgrading my computers from Windows XP to Windows 7 and I ended up losing a lot of information - my fault. I have been using the TAC32 demonstration software and I have been able to verify that my GPS

Re: [time-nuts] TU60-D120-041 power up

Hi Michael, Thank you for your suggestion. This is my first post to the group so I hope I am replying correctly. I have downloaded WinLabMon (for Windows XP?) and WinOncore12 but I have not been able to communicate with the GPS receiver yet. Yes, please send me the program you mentioned and

Re: [time-nuts] TU60-D120-041 power up

Michael, OZ2ELA -Oprindelig meddelelse- Fra: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] På vegne af Jerry Sendt: 24. juni 2014 04:14 Til: time-nuts@febo.com Emne: Re: [time-nuts] TU60-D120-041 power up Hi Michael, Thank you for your suggestion. This is my first post

[time-nuts] TU60-D120-041 power up

I bought a receiver labelled as Conexant Jupiter-T TU60-D120-041. I constructed an RS-232 serial interface, a 1 Pulse per Second LED and a 10 kHz test point. After a few minutes the 1 pulse per second LED syncs up with the audible ticks on WWV so it seems that the receiver is receiving the

Re: [time-nuts] TU60-D120-041 power up

-Oprindelig meddelelse- Fra: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] På vegne af Jerry Sendt: 23. juni 2014 05:53 Til: time-nuts@febo.com Emne: [time-nuts] TU60-D120-041 power up I bought a receiver labelled as Conexant Jupiter-T TU60-D120-041. I constructed an RS-232