Re: [time-nuts] Connector options for HP10811A?

Hi Yes, I have used all the parts I mentioned. They all had the right spacing / right number of pins. I have no idea what the spec drawing on the 520-201 is trying to show. Bob > On Apr 11, 2020, at 12:42 AM, Robert DiRosario wrote: > > Have you used the Mouser part you listed? When you loo

Re: [time-nuts] Connector options for HP10811A?

Have you used the Mouser part you listed? When you look at the spec sheet it only shows 8 of the 15 pins installed in the connector. https://www.mouser.com/datasheet/2/123/307-030-520-201_-_EDAC_Card_Edge_Connector-1653445.pdf I have used this, and it show all the pins installed: https://www

Re: [time-nuts] Connector options for HP10811A?

I just ordered some from Mouser in November, this is it: https://www.mouser.com/ProductDetail/587-305-50-030 They list 41 in stock, for 1 to 9 the price is $8.43 Robert On 04/08/2020 09:39 PM, Frank O'Donnell wrote: I recently bought an HP10811A oscillator on eBay, only belatedly realizing t

Re: [time-nuts] Connector options for HP10811A?...

Thanks for all of the replies to my question about a connector for the HP10811A. Sounds like a number of good options. Frank ___ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nut

Re: [time-nuts] Connector options for HP10811A?...

Or with wire tab for hand soldering wires Mouser #: 587-306-50-015 Mfr. #: 306-015-500-102 Mfr.: EDAC Description: Standard Card Edge Connectors 15P SOLDER EYELETS CENTER SPACE $7.39 On Thu, Apr 9, 2020 at 7:26 AM Graham / KE9H wrote: > A connector which works well for connecting to the HP108

Re: [time-nuts] Connector options for HP10811A?...

A connector which works well for connecting to the HP10811 is in stock at Mouser, which is open and shipping. Mouser #: 587-306-52-015 Mfr. #: 306-015-520-102 Mfr.: EDAC Description: Standard Card Edge Connectors 15P SOLDER TAIL CENTER SPACE Price Quantity 1: $11.47 --- Graham On Wed, Apr 8, 20

Re: [time-nuts] Connector options for HP10811A?

Sorry guys. I thought I was writing directly to Frank. My eyes aren't always pointy enough for my phone thingy. Burt, K6OQK On April 8, 2020 7:54:05 PM PDT, b...@att.net wrote: >Also... rather than clip leads, solder wires onto the board, not the >connector pins. Use those to hook up the pow

Re: [time-nuts] Connector options for HP10811A?

Also... rather than clip leads, solder wires onto the board, not the connector pins. Use those to hook up the power supply. Me On April 8, 2020 6:39:39 PM PDT, Frank O'Donnell wrote: >I recently bought an HP10811A oscillator on eBay, only belatedly >realizing that it's designed to interface t

Re: [time-nuts] Connector options for HP10811A?...

Frank, Can you send me a picture of the connector? Are you familiar with APEX (Surplus) Electronics in Sun Valley. The sometimes have unusual connectors. The problem is, you may have to look through the place for it. The good news is that they can tell you where to start looking. me A

Re: [time-nuts] Connector options for HP10811A?

Hi The connector is a very normal 2 x 15 position 0.156” spaced edge connector. You can buy them on Amazon: https://www.amazon.com/gp/product/B0721L5VSD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1