Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby. Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
Paul, So you were there and I missed you then. It was hard to find anything. Looking in all the corners. Most of its now the monthly repeat stuff that doesn't seem to move. John, You are right it would be a TM5000 3 bay. The color is tek blue, not the brown of the 5000 series. Funny I don't care about color. Now I can plug the AA5010 into a home. Regards Paul On Mon, May 20, 2013 at 8:11 AM, Ziggy zig...@pumpkinbrook.com wrote: I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby. Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
There are cafe/pizza options in the Strattion Student Center, although seating is somewhat limited. But there are other places in the same building. It's a short walk from the flea site (Mass Ave at Vasser Street) Bldg W-20 -John I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby. Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
It is surprizingly difficult to find other shoppers at the Flea. I suspoect it's because people sort of 'shop with the flow'- all moving in the same direction. -John = Paul, So you were there and I missed you then. It was hard to find anything. Looking in all the corners. Most of its now the monthly repeat stuff that doesn't seem to move. John, You are right it would be a TM5000 3 bay. The color is tek blue, not the brown of the 5000 series. Funny I don't care about color. Now I can plug the AA5010 into a home. Regards Paul On Mon, May 20, 2013 at 8:11 AM, Ziggy zig...@pumpkinbrook.com wrote: I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby. Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
Plenty of good stuff in the area; Flour, Area Four, Catalyst, Friendly Toast, Blue Room, CBC, and so on. I live in the area - recent MIT graduate - and would be happy to set something up (though I think my gf's birthday is that day, so maybe not) Andy Bardagjy bardagjy.com On Mon, May 20, 2013 at 8:34 AM, J. Forster j...@quikus.com wrote: There are cafe/pizza options in the Strattion Student Center, although seating is somewhat limited. But there are other places in the same building. It's a short walk from the flea site (Mass Ave at Vasser Street) Bldg W-20 -John I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby. Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
IMO, it would be good to have any gathering place w/in easy walking distance of the flea. Parking in Cambridge is not easy in the best of times. YMMV, -John = Plenty of good stuff in the area; Flour, Area Four, Catalyst, Friendly Toast, Blue Room, CBC, and so on. I live in the area - recent MIT graduate - and would be happy to set something up (though I think my gf's birthday is that day, so maybe not) Andy Bardagjy bardagjy.com On Mon, May 20, 2013 at 8:34 AM, J. Forster j...@quikus.com wrote: There are cafe/pizza options in the Strattion Student Center, although seating is somewhat limited. But there are other places in the same building. It's a short walk from the flea site (Mass Ave at Vasser Street) Bldg W-20 -John I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby. Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
A gentle reminder to keep postings to time-nuts as technical as possible, and on-topic. The occasional mention of upcoming local events or conferences is welcome (it's a great way to build community), but I suggest subsequent details, follow-up, meeting arrangements, and where to get pizza should be done by private email. The list now has 1300 members world-wide. Thanks, /tvb http://leapsecond.com/time-nuts.htm ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Time Nut Pickens at the MIT Flea ?
Anyone got any Time Nut quality items at the MIT fleamarket today ? Stan, W1LE Cape Cod ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
Not me. IMO, the pickings were pretty slim. I think a number of ventors opted for Dayton. -John == Anyone got any Time Nut quality items at the MIT fleamarket today ? Stan, W1LE Cape Cod ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
I grabbed a real nice Leitech distribution amplifier - but I took it home and it was empty! I walked back and returned it for a refund, but the seller said he had a whole stack in his office. I was gonna post to the list when I sort it out - it was a real bargin, and he said he might be willing to ship them around. Andy Bardagjy bardagjy.com On Sun, May 19, 2013 at 4:42 PM, Stan, W1LE stanw...@verizon.net wrote: Anyone got any Time Nut quality items at the MIT fleamarket today ? Stan, W1LE Cape Cod __**_ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/** mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: Hello to the group. I did see the leitch video DA's. Was a good price if the DA's were in the case. The other thing to watch out for is that Leitch made all types of DAs digital also. You want the simple vide monitoring DA, Equalizing DAs are OK also delays are a pain. John it was good to see you and Jim. Great Wx. As for the pickens not much at all. I picked up to EGG RB oscillators and warming one up right now to see if it will work. At $20 each worth a try. Other then that parts and the real find a HPIB frame for Tek modules for $20. Been looking for one for quite a while. But really little time-nuttery stuff. Stan one day one way or another would be good to run into you. I also did not see Paul. (The other one who is also a slight time nut) Regards Paul On Sun, May 19, 2013 at 6:55 PM, Andy Bardagjy a...@bardagjy.com wrote: I grabbed a real nice Leitech distribution amplifier - but I took it home and it was empty! I walked back and returned it for a refund, but the seller said he had a whole stack in his office. I was gonna post to the list when I sort it out - it was a real bargin, and he said he might be willing to ship them around. Andy Bardagjy bardagjy.com On Sun, May 19, 2013 at 4:42 PM, Stan, W1LE stanw...@verizon.net wrote: Anyone got any Time Nut quality items at the MIT fleamarket today ? Stan, W1LE Cape Cod __**_ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/** mailman/listinfo/time-nuts https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Time Nut Pickens at the MIT Flea ?
Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes bow...@gmail.com wrote: We should plan a Time-Nuts BOF lunch after the next flea. Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a few 10811s of dubious quality for $50 ea. the dents put me off gambling on one since I was given or the afternoon before! ;) On May 19, 2013, at 21:50, paul swed paulsw...@gmail.com wrote: Hello to the group. I did see the leitch video DA's. Was a good price if the DA's were in the case. The other thing to watch out for is that Leitch made all types of DAs digital also. You want the simple vide monitoring DA, Equalizing DAs are OK also delays are a pain. John it was good to see you and Jim. Great Wx. As for the pickens not much at all. I picked up to EGG RB oscillators and warming one up right now to see if it will work. At $20 each worth a try. Other then that parts and the real find a HPIB frame for Tek modules for $20. Been looking for one for quite a while. But really little time-nuttery stuff. Stan one day one way or another would be good to run into you. I also did not see Paul. (The other one who is also a slight time nut) Regards Paul On Sun, May 19, 2013 at 6:55 PM, Andy Bardagjy a...@bardagjy.com wrote: I grabbed a real nice Leitech distribution amplifier - but I took it home and it was empty! I walked back and returned it for a refund, but the seller said he had a whole stack in his office. I was gonna post to the list when I sort it out - it was a real bargin, and he said he might be willing to ship them around. Andy Bardagjy bardagjy.com On Sun, May 19, 2013 at 4:42 PM, Stan, W1LE stanw...@verizon.net wrote: Anyone got any Time Nut quality items at the MIT fleamarket today ? Stan, W1LE Cape Cod __**_ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/** mailman/listinfo/time-nuts https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.