It is surprizingly difficult to find other shoppers at the Flea. I
suspoect it's because people sort of 'shop with the flow'- all moving in
the same direction.

-John

=================



> Paul,
> So you were there and I missed you then. It was hard to find anything.
> Looking in all the corners. Most of its now the monthly repeat stuff that
> doesn't seem to move.
>
> John,
> You are right it would be a TM5000 3 bay. The color is tek blue, not the
> brown of the 5000 series. Funny I don't care about color. Now I can plug
> the AA5010 into a home.
> Regards
> Paul
>
>
>
> On Mon, May 20, 2013 at 8:11 AM, Ziggy <zig...@pumpkinbrook.com> wrote:
>
>> I was there as well, but did not see much of interest. That might be
>> because Paul Swed scooped up the good stuff before I could finish the
>> first
>> pass :) Nice find Paul, hope they settle down for you. Would love to see
>> a
>> post-flea get together and put some faces with names, but I don't know
>> of
>> any places nearby.
>>
>> Paul - K9MR
>>
>> On May 19, 2013, at 10:22 PM, paul swed wrote:
>>
>> Good news at least the first EGG RB fired up and after adjusting the
>> synthesizer is locked very nicely. Letting it bake and figuring out the
>> dip
>> switches. They were wrong or purposely offset. Hard to say. Lamp voltage
>> is
>> 12 VDC I suspect thats quite a good number if compared to the old FRS
>> and
>> FRCs I have down in the 5-6V range. The FRS/C run 12 new.
>> Can't really find any documentation, but expected that.
>> Regards
>> Paul
>> WB8TSL
>>
>>
>> On Sun, May 19, 2013 at 10:09 PM, Bob Bownes <bow...@gmail.com> wrote:
>>
>> > We should plan a Time-Nuts BOF lunch after the next flea.
>> >
>> > Saw little TN gear @ Dayton save one Efretom RBI time base for $1800
>> and
>> a
>> > few 10811s of dubious quality for $50 ea. the dents put me off
>> gambling
>> on
>> > one since I was given or the afternoon before! ;)
>> >
>> > On May 19, 2013, at 21:50, paul swed <paulsw...@gmail.com> wrote:
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts@febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>


_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to