I was there as well, but did not see much of interest. That might be because Paul Swed scooped up the good stuff before I could finish the first pass :) Nice find Paul, hope they settle down for you. Would love to see a post-flea get together and put some faces with names, but I don't know of any places nearby.
Paul - K9MR On May 19, 2013, at 10:22 PM, paul swed wrote: Good news at least the first EGG RB fired up and after adjusting the synthesizer is locked very nicely. Letting it bake and figuring out the dip switches. They were wrong or purposely offset. Hard to say. Lamp voltage is 12 VDC I suspect thats quite a good number if compared to the old FRS and FRCs I have down in the 5-6V range. The FRS/C run 12 new. Can't really find any documentation, but expected that. Regards Paul WB8TSL On Sun, May 19, 2013 at 10:09 PM, Bob Bownes <bow...@gmail.com> wrote: > We should plan a Time-Nuts BOF lunch after the next flea. > > Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and a > few 10811s of dubious quality for $50 ea. the dents put me off gambling on > one since I was given or the afternoon before! ;) > > On May 19, 2013, at 21:50, paul swed <paulsw...@gmail.com> wrote: _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.