[Touch-packages] [Bug 1876065] Re: After unplug headphones and plug them again no sound can be heard
Thanks for verification. ** Tags removed: verification-needed verification-needed-focal ** Tags added: verification-done verification-done-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1876065 Title: After unplug headphones and plug them again no sound can be heard Status in pulseaudio package in Ubuntu: Fix Committed Status in pulseaudio source package in Focal: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: * Impact Sound isn't automatically redirected to headphones when those are connected to a jack interface * Test case Disconnect the headsets Start your webbrowser/music player/video player and play some sound Connect the headsets to the jack interface -> the sound should be directly redirected to the plugged headsets * Regression potential Check that audio routing when connecting/disconnecting devices to the hack entry is working correctly After startup with headset plugged in they play sound nicely - no issue. When they are unplugged, the sound is switched to the speaker (laptop) - all good. However, when I plug the headset back there is no sound. I see the app on pavucontrol, the volume is fine - everything looks fine except there is no sound. I dumped output of "pactl list" command on startup (headset plugged), after unplugging the headset, and when it is plugged back. From the comparison of these outputs, it looks like the source has got muted after the headset is plugged. Source #1 State: RUNNING Name: alsa_input.pci-_00_1f.3.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: yes Attached three outputs: headset-in.txt - after startup with headset plugged - all fine. headset-out.txt - after unplugged headset - sound through the speaker - all fine. headset-back.txt - after plugged headset back - no sound. Any help greatly appreciated. Regards, Roman To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1876065/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877793] Re: [Inspiron 13-5378, Realtek ALC3253, Speaker, Internal] No sound at all
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: alsa-driver (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1877793 Title: [Inspiron 13-5378, Realtek ALC3253, Speaker, Internal] No sound at all Status in alsa-driver package in Ubuntu: Confirmed Bug description: Is a duplicate of bug 1877766 On installation 16.04 LTS there is sound. Also sound in windows. But as soon as Ubuntu updates, no sound. Tried 18 LTS no sound Tried 20 LTS - sound comes back But I want to stick with 16.04 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.15.0-99.100~16.04.1-generic 4.15.18 Uname: Linux 4.15.0-99-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1556 F pulseaudio CurrentDesktop: Unity Date: Sat May 9 22:26:24 2020 InstallationDate: Installed on 2020-05-09 (0 days ago) InstallationMedia: Ubuntu 16.04.6 LTS "Xenial Xerus" - Release amd64 (20190227) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1556 F pulseaudio Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [Inspiron 13-5378, Realtek ALC3253, Speaker, Internal] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/10/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.28.0 dmi.board.name: 05C3PP dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.28.0:bd05/10/2019:svnDellInc.:pnInspiron13-5378:pvr:rvnDellInc.:rn05C3PP:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 13-5378 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1877793/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880266] Re: console-setup defaults prevent using automatic highdpi fonts
** Package changed: linux (Ubuntu) => console-setup (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to console-setup in Ubuntu. https://bugs.launchpad.net/bugs/1880266 Title: console-setup defaults prevent using automatic highdpi fonts Status in console-setup package in Ubuntu: Incomplete Bug description: console-setup defaults prevent using automatic highdpi fonts Kernel has built-in Terminus fonts, at multiple sizes, and it picks font based on screen resolution, including selecting high-dpi version of the font. The autogenerated default of FONTFACE=VGA and FONTSIZE=16 for Lat15 results in tiny font getting set on high-dpi laptops. Dropping this setting, makes fonts to be of correct size on highdpi screens. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/console-setup/+bug/1880266/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880266] [NEW] console-setup defaults prevent using automatic highdpi fonts
You have been subscribed to a public bug: console-setup defaults prevent using automatic highdpi fonts Kernel has built-in Terminus fonts, at multiple sizes, and it picks font based on screen resolution, including selecting high-dpi version of the font. The autogenerated default of FONTFACE=VGA and FONTSIZE=16 for Lat15 results in tiny font getting set on high-dpi laptops. Dropping this setting, makes fonts to be of correct size on highdpi screens. ** Affects: console-setup (Ubuntu) Importance: Undecided Status: Incomplete -- console-setup defaults prevent using automatic highdpi fonts https://bugs.launchpad.net/bugs/1880266 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to console-setup in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1868415] Re: Dell l322x Touchpad click drag doesn't work
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1868415 Title: Dell l322x Touchpad click drag doesn't work Status in xorg package in Ubuntu: Expired Bug description: I've upgraded (fresh installation) my OS from 14.04 to 18.04. And everything but the touchpad seems to work properly. When i try to drag and drop something or selecting some text seems dead. I tried to do the same things with an external mouse and it works well. > sudo libinput measure touchpad-pressure [sudo] password di matteog: Using CyPS/2 Cypress Trackpad: /dev/input/event6 Ready for recording data. Pressure range used: 30:25 Palm pressure range used: 130 Place a single finger on the touchpad to measure pressure values. Ctrl+C to exit Sequence 116 pressure: min: 46 max: 95 avg: 84 median: 89 tags: down Sequence 117 pressure: min: 29 max: 97 avg: 67 median: 86 tags: down Sequence 118 pressure: min: 25 max: 50 avg: 41 median: 44 tags: down Sequence 119 pressure: min: 13 max: 14 avg: 13 median: 14 tags: Sequence 120 pressure: min: 28 max: 31 avg: 29 median: 31 tags: down Sequence 121 pressure: min: 15 max: 33 avg: 26 median: 29 tags: down Sequence 122 pressure: min: 37 max: 82 avg: 66 median: 73 tags: down Sequence 123 pressure: min: 63 max: 94 avg: 83 median: 89 tags: down Sequence 124 pressure: min: 66 max: 137 avg: 118 median: 126 tags: down palm Sequence 125 pressure: min: 47 max: 73 avg: 63 median: 68 tags: down Sequence 126 pressure: min: 33 max: 66 avg: 55 median: 58 tags: down Sequence 127 pressure: min: 32 max: 100 avg: 81 median: 91 tags: down Sequence 128 pressure: min: 44 max: 86 avg: 72 median: 78 tags: down Sequence 129 pressure: min: 62 max: 108 avg: 95 median: 103 tags: down Sequence 130 pressure: min: 72 max: 131 avg: 118 median: 124 tags: down palm Sequence 131 pressure: min: 52 max: 112 avg: 96 median: 103 tags: down Sequence 132 pressure: min: 44 max: 101 avg: 83 median: 88 tags: down Sequence 133 pressure: min: 150 max: 150 avg: 150 median: 150 tags: down palm Traceback (most recent call last): File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 299, in main(sys.argv) File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 289, in main loop(device) File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 246, in loop handle_event(device, event) File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 233, in handle_event handle_abs(device, event) File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 224, in handle_abs print("\r{}".format(s)) File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 105, in __str__ return self._str_state() if self.is_active else self._str_summary() File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 114, in _str_summary self.avg(), File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-touchpad-pressure", line 96, in avg return int(sum([p.pressure for p in self.points])/len(self.points)) ZeroDivisionError: division by zero To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1868415/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880262] Re: package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1880262 Title: package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127 Status in ibus package in Ubuntu: New Bug description: Was installing Xubuntu Desktop via tasksel ProblemType: Package DistroRelease: Ubuntu 20.04 Package: ibus 1.5.22-2ubuntu2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip Date: Fri May 22 23:29:17 2020 DuplicateSignature: package:ibus:1.5.22-2ubuntu2 Removing ibus (1.5.22-2ubuntu2) ... /var/lib/dpkg/info/ibus.prerm: 7: dconf: not found dpkg: error processing package ibus (--remove): installed ibus package pre-removal script subprocess returned error exit status 127 ErrorMessage: installed ibus package pre-removal script subprocess returned error exit status 127 InstallationDate: Installed on 2020-05-21 (2 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: ibus Title: package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1880262/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880262] [NEW] package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127
Public bug reported: Was installing Xubuntu Desktop via tasksel ProblemType: Package DistroRelease: Ubuntu 20.04 Package: ibus 1.5.22-2ubuntu2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip Date: Fri May 22 23:29:17 2020 DuplicateSignature: package:ibus:1.5.22-2ubuntu2 Removing ibus (1.5.22-2ubuntu2) ... /var/lib/dpkg/info/ibus.prerm: 7: dconf: not found dpkg: error processing package ibus (--remove): installed ibus package pre-removal script subprocess returned error exit status 127 ErrorMessage: installed ibus package pre-removal script subprocess returned error exit status 127 InstallationDate: Installed on 2020-05-21 (2 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: ibus Title: package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ibus (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1880262 Title: package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127 Status in ibus package in Ubuntu: New Bug description: Was installing Xubuntu Desktop via tasksel ProblemType: Package DistroRelease: Ubuntu 20.04 Package: ibus 1.5.22-2ubuntu2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip Date: Fri May 22 23:29:17 2020 DuplicateSignature: package:ibus:1.5.22-2ubuntu2 Removing ibus (1.5.22-2ubuntu2) ... /var/lib/dpkg/info/ibus.prerm: 7: dconf: not found dpkg: error processing package ibus (--remove): installed ibus package pre-removal script subprocess returned error exit status 127 ErrorMessage: installed ibus package pre-removal script subprocess returned error exit status 127 InstallationDate: Installed on 2020-05-21 (2 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: ibus Title: package ibus 1.5.22-2ubuntu2 failed to install/upgrade: installed ibus package pre-removal script subprocess returned error exit status 127 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1880262/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876055] Re: SRU: Backport 2.4.3-1ubuntu2 from groovy to focal/eoan/bionic/xenial for newer syscalls for core20 base
** Tags added: upgrade-software-version ** Changed in: libseccomp (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libseccomp in Ubuntu. https://bugs.launchpad.net/bugs/1876055 Title: SRU: Backport 2.4.3-1ubuntu2 from groovy to focal/eoan/bionic/xenial for newer syscalls for core20 base Status in libseccomp package in Ubuntu: New Bug description: [Impact] snap-confine from snapd uses libseccomp to filter various system calls for confinement. The current version in eoan/bionic/xenial (2.4.1) is missing knowledge of various system calls for various architectures. As such this causes strange issues like python snaps segfaulting (https://github.com/snapcore/core20/issues/48) or the inadvertent denial of system calls which should be permitted by the base policy (https://forum.snapcraft.io/t/getrlimit-blocked-by-seccomp-on-focal- arm64/17237). libseccomp in groovy is using the latest upstream base release (2.4.3) plus it includes a patch to add some missing aarch64 system calls (https://bugs.launchpad.net/ubuntu/+source/libseccomp/+bug/1877633). SRUing this version back to older stable releases allows libseccomp to operate correctly on all supported architectures. [Test Case] libseccomp includes a significant unit test suite that is run during the build and as part of autopkgtests. To verify the new aarch64 system calls are resolved as expected the scmp_sys_resolver command can be used as well: $ scmp_sys_resolver -a aarch64 getrlimit 163 (whereas in the current version in focal this returns -10180 as libseccomp was not aware of this system-call at compile-time). As part of this SRU, the test suite in libseccomp has been patched to include a local copy of the architecture-specific kernel headers from the 5.4 kernel in focal *for all releases*, so that all system calls which are defined for the 5.4 kernel are known about *for the libseccomp test suite*. This allows all unit tests to pass on older releases as well and defaults the build to fail on unit test failures (whereas currently in xenial this has been overridden to ignore failures). [Regression Potential] This has a low regression potential due to significant testing with many packages that depend on libseccomp (lxc, qemu, snapd, apt, man etc) and none have shown any regression using this new version. Any possible regressions may include applications now seeing correct system call resolution whereas previously this would have failed, and so perhaps previous failures (which were erroneous) will now be permitted. However, this was always permitted previously by the policy anyway but just denied due to this bug so it is not a true regression as such. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libseccomp/+bug/1876055/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879087] Re: dbus errors, frequent roaming and unstable connectivity
** Changed in: wpa (Ubuntu Focal) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wpa in Ubuntu. https://bugs.launchpad.net/bugs/1879087 Title: dbus errors, frequent roaming and unstable connectivity Status in wpa package in Ubuntu: Fix Committed Status in wpa source package in Focal: Incomplete Bug description: * Impact extra roaming events are been generated * Test case check the output of `journalctl -lu wpa_supplicant`, it should have warnings dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/3 the roaming events should not be too frequent * Regression potential check that wifi connection keep working correctly -- When using this version of wpa_supplicant with my company WPA2-Enterprise wireless setup, I'm experiencing far too frequent roaming events (even when not moving around) accompanied by hiccups in connectivity. I also see these messages in the wpa_supplicant log: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/3 dbus: wpa_dbus_property_changed: no property RoamTime in object /fi/w1/wpa_supplicant1/Interfaces/3 dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/3 Having done a little research, at least the dbus errors seem to be fixed by this commit upstream: https://w1.fi/cgit/hostap/commit/wpa_supplicant/dbus/dbus_new.c?id=23d87687c2428f3b94865580b0d33e05c03e6756 So I built a version of wpa_supplicant including this particular patch and installed on my machine. Apart from solving the dbus errors completely, it seems to have had a positive impact on the frequent roaming and unstable connectivity as well (I've run for a day with no burst of roaming events at all, where they used to happen every few minutes most of the time.) ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: wpasupplicant 2:2.9-1ubuntu4 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: GNOME Date: Sat May 16 16:47:27 2020 InstallationDate: Installed on 2020-05-12 (4 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: wpa UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wpa/+bug/1879087/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876238] Re: [Dell Inspiron 1525, SigmaTel STAC9228] No sound at all. Internal Speaker Not Detected. Dummy Output. After Upgrading From 19.10 to 20.04 LTS Focal
*** This bug is a duplicate of bug 1876065 *** https://bugs.launchpad.net/bugs/1876065 ** This bug is no longer a duplicate of bug 1875252 Ubuntu 20.04 LTS update causing no sound coming from built-in speakers ** This bug has been marked a duplicate of bug 1876065 After unplug headphones and plug them again no sound can be heard -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1876238 Title: [Dell Inspiron 1525, SigmaTel STAC9228] No sound at all. Internal Speaker Not Detected. Dummy Output. After Upgrading From 19.10 to 20.04 LTS Focal Status in alsa-driver package in Ubuntu: Confirmed Bug description: Internal speakers were working fine until I upgraded the system from 19.10 LTS to 20.04 LTS on April 23, 2020. Uninstalled and reinstalled alsamixer and pavucontrol, but of no use. Killed pavucontrol and reloaded alsamixer numerous times, but of no use. (`pulseaudio -k && sudo alsa force-reload`) Waited for two kernel updates, but of no use. Presently on 5.4.0-29. Tried upgrading the kernel even up to 5.6, but of no use. The Intel sound card is not getting detected. Tried every trick like adding "options snd-hda-intel dmic_detect=0" in the /etc/modprobe.d/alsa-base.conf, but of no use. Out of the two external audio output sockets for headphone, one is working. So I can either connect a headphone or an external speaker to this jack to tide over the crisis for the time being. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: raj 10952 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri May 1 09:54:23 2020 InstallationDate: Installed on 2016-12-20 (1227 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed Symptom_Card: Built-in Audio - HDA Intel Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: raj 10952 F pulseaudio Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [Inspiron 1525, SigmaTel STAC9228, Speaker, Internal] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/27/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd06/27/2008:svnDellInc.:pnInspiron1525:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 1525 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.modprobe.d.alsa-base.conf: 2020-04-26T17:25:43.583147 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1876238/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877580] Re: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all
*** This bug is a duplicate of bug 1876065 *** https://bugs.launchpad.net/bugs/1876065 ** This bug is no longer a duplicate of bug 1879939 Audio stopped working after 5.4.0-31 kernel update ** This bug has been marked a duplicate of bug 1876065 After unplug headphones and plug them again no sound can be heard -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1877580 Title: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all Status in alsa-driver package in Ubuntu: New Bug description: After upgrade from 19.10 to 20.04 (xubuntu) I've lost the sound on the headphones. The internal loud speakers works ok when the headphones are not plugged in. More specifically: If I open the pavucontrol without the headphones plugged in I see that is correctly mentioning the output as Port: "Speakers (plugged-in)" and everything works ok, I have sound from the speakers. The moment I plug in the headphones, for a fraction of a second I can hear sound on the headphones, and then the output port switches to "headphones" which is the moment I lose the sound. The fraction that I hear the sound is when the jack is half-inserted and I get the sound on one channel only. When is fully inserted, the computer detects it and makes the switch. I've tried also in alsamixer all possibilities I could imagine, playing with mute/unmute and gain of each channel, with no success ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bnv1312 F pulseaudio bnv 21367 F alsamixer /dev/snd/pcmC0D0c: bnv1312 F...m pulseaudio /dev/snd/pcmC0D0p: bnv1312 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Fri May 8 15:41:08 2020 InstallationDate: Installed on 2019-08-08 (274 days ago) InstallationMedia: Xubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bnv1312 F pulseaudio bnv 21367 F alsamixer /dev/snd/pcmC0D0c: bnv1312 F...m pulseaudio /dev/snd/pcmC0D0p: bnv1312 F...m pulseaudio Symptom_Jack: Black Headphone Out, Front Symptom_Type: No sound at all Title: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/08/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0KP0FT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd11/08/2019:svnDellInc.:pnLatitude7490:pvr:rvnDellInc.:rn0KP0FT:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Latitude dmi.product.name: Latitude 7490 dmi.product.sku: 081C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1877580/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877580] Re: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all
*** This bug is a duplicate of bug 1879939 *** https://bugs.launchpad.net/bugs/1879939 ** This bug is no longer a duplicate of bug 1879989 "Failed to play sound: No such driver" ubuntu 20.04 ** This bug has been marked a duplicate of bug 1879939 Audio stopped working after 5.4.0-31 kernel update -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1877580 Title: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all Status in alsa-driver package in Ubuntu: New Bug description: After upgrade from 19.10 to 20.04 (xubuntu) I've lost the sound on the headphones. The internal loud speakers works ok when the headphones are not plugged in. More specifically: If I open the pavucontrol without the headphones plugged in I see that is correctly mentioning the output as Port: "Speakers (plugged-in)" and everything works ok, I have sound from the speakers. The moment I plug in the headphones, for a fraction of a second I can hear sound on the headphones, and then the output port switches to "headphones" which is the moment I lose the sound. The fraction that I hear the sound is when the jack is half-inserted and I get the sound on one channel only. When is fully inserted, the computer detects it and makes the switch. I've tried also in alsamixer all possibilities I could imagine, playing with mute/unmute and gain of each channel, with no success ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bnv1312 F pulseaudio bnv 21367 F alsamixer /dev/snd/pcmC0D0c: bnv1312 F...m pulseaudio /dev/snd/pcmC0D0p: bnv1312 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Fri May 8 15:41:08 2020 InstallationDate: Installed on 2019-08-08 (274 days ago) InstallationMedia: Xubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bnv1312 F pulseaudio bnv 21367 F alsamixer /dev/snd/pcmC0D0c: bnv1312 F...m pulseaudio /dev/snd/pcmC0D0p: bnv1312 F...m pulseaudio Symptom_Jack: Black Headphone Out, Front Symptom_Type: No sound at all Title: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/08/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0KP0FT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd11/08/2019:svnDellInc.:pnLatitude7490:pvr:rvnDellInc.:rn0KP0FT:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Latitude dmi.product.name: Latitude 7490 dmi.product.sku: 081C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1877580/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877580] Re: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all
*** This bug is a duplicate of bug 1879989 *** https://bugs.launchpad.net/bugs/1879989 ** This bug has been marked a duplicate of bug 1879989 "Failed to play sound: No such driver" ubuntu 20.04 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1877580 Title: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all Status in alsa-driver package in Ubuntu: New Bug description: After upgrade from 19.10 to 20.04 (xubuntu) I've lost the sound on the headphones. The internal loud speakers works ok when the headphones are not plugged in. More specifically: If I open the pavucontrol without the headphones plugged in I see that is correctly mentioning the output as Port: "Speakers (plugged-in)" and everything works ok, I have sound from the speakers. The moment I plug in the headphones, for a fraction of a second I can hear sound on the headphones, and then the output port switches to "headphones" which is the moment I lose the sound. The fraction that I hear the sound is when the jack is half-inserted and I get the sound on one channel only. When is fully inserted, the computer detects it and makes the switch. I've tried also in alsamixer all possibilities I could imagine, playing with mute/unmute and gain of each channel, with no success ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bnv1312 F pulseaudio bnv 21367 F alsamixer /dev/snd/pcmC0D0c: bnv1312 F...m pulseaudio /dev/snd/pcmC0D0p: bnv1312 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Fri May 8 15:41:08 2020 InstallationDate: Installed on 2019-08-08 (274 days ago) InstallationMedia: Xubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bnv1312 F pulseaudio bnv 21367 F alsamixer /dev/snd/pcmC0D0c: bnv1312 F...m pulseaudio /dev/snd/pcmC0D0p: bnv1312 F...m pulseaudio Symptom_Jack: Black Headphone Out, Front Symptom_Type: No sound at all Title: [Latitude 7490, Realtek ALC3246, Black Headphone Out, Front] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/08/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0KP0FT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd11/08/2019:svnDellInc.:pnLatitude7490:pvr:rvnDellInc.:rn0KP0FT:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Latitude dmi.product.name: Latitude 7490 dmi.product.sku: 081C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1877580/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880222] Re: ubuntu bionic-backports Hash Sum mismatch
Are you still having trouble with this file? If you still have this file: /var/lib/apt/lists/partial/us.archive.ubuntu.com_ubuntu_dists_bionic-backports_Contents-i386.gz can you determine from looking at it if it looks remotely close to what was expected? The usual cause of this problem is ISP-deployed transparent caches, it might be worth looking into various websites for "am I behind a proxy?". I've seen apt-cacher-ng cause this problem too, but that was seven years ago. The version of this file I retrieved a few minutes ago from all four archive mirrors that I can reach were identical, and matched what the Release file says they should match. Thanks ** Information type changed from Private Security to Public Security ** Changed in: apt (Ubuntu) Status: New => Incomplete ** Changed in: update-manager (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1880222 Title: ubuntu bionic-backports Hash Sum mismatch Status in apt package in Ubuntu: Incomplete Status in update-manager package in Ubuntu: Incomplete Bug description: # apt-get update (proceeded normally until...) Err:24 http://us.archive.ubuntu.com/ubuntu bionic-backports i386 Contents (deb) Hash Sum mismatch Hashes of expected file: - Filesize:724924 [weak] - SHA256:d59f30b35a9fd0f52922cbf3a4bf1f0713e816a209cca57bac1dbc56af3c9a77 - SHA1:0d1e53232da2c41febc6cccecfc4000f930c3450 [weak] - MD5Sum:dfa1f7010a23b70c967aef7600ebd49f [weak] Hashes of received file: - SHA256:1c97d900fc3b9168c38bf870b1dd7c71be88ff72e0751c1551b8129c8de98740 - SHA1:a725025e50c3ebd60dd16058594340b4ca9c97e2 [weak] - MD5Sum:925bb2a78f81a2dc9b4269a6f5e9ece5 [weak] - Filesize:90948 [weak] Release file created at: Fri, 22 May 2020 16:49:51 + Fetched 254 MB in 51s (5,014 kB/s) Reading package lists... Done E: Failed to fetch store:/var/lib/apt/lists/partial/us.archive.ubuntu.com_ubuntu_dists_bionic-backports_Contents-i386.gz Hash Sum mismatch Hashes of expected file: - Filesize:724924 [weak] - SHA256:d59f30b35a9fd0f52922cbf3a4bf1f0713e816a209cca57bac1dbc56af3c9a77 - SHA1:0d1e53232da2c41febc6cccecfc4000f930c3450 [weak] - MD5Sum:dfa1f7010a23b70c967aef7600ebd49f [weak] Hashes of received file: - SHA256:1c97d900fc3b9168c38bf870b1dd7c71be88ff72e0751c1551b8129c8de98740 - SHA1:a725025e50c3ebd60dd16058594340b4ca9c97e2 [weak] - MD5Sum:925bb2a78f81a2dc9b4269a6f5e9ece5 [weak] - Filesize:90948 [weak] Release file created at: Fri, 22 May 2020 16:49:51 + E: Some index files failed to download. They have been ignored, or old ones used instead. $ apt-get -v apt 1.6.12ubuntu0.1 (amd64) Also, Software Updater (version 1:18.04.11.12) after hitting "Install" gives pop-up: "Requires installation of untrusted packages This requires installing packages from unauthenticated sources." Only options: "Settings..." and "OK" And it is not OK; I have not configured any unauthenticated sources! This occurs when enabling updates from Ubuntu Base (but not Security updates). I expected to not get such errors and updating to occur normally. $ lsb_release -rd Description: Ubuntu 18.04.4 LTS Release: 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1880222/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879087] Re: dbus errors, frequent roaming and unstable connectivity
> the roaming events should not be too frequent That's not an objective test case. Please provide a clear test case that anyone should be able to follow to determine whether this bug has been fixed. ** Description changed: * Impact extra roaming events are been generated * Test case - check the wpa_supplicant log, it should have warnings + check the output of `journalctl -lu wpa_supplicant`, it should have warnings dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/3 the roaming events should not be too frequent * Regression potential check that wifi connection keep working correctly - -- When using this version of wpa_supplicant with my company WPA2-Enterprise wireless setup, I'm experiencing far too frequent roaming events (even when not moving around) accompanied by hiccups in connectivity. I also see these messages in the wpa_supplicant log: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/3 dbus: wpa_dbus_property_changed: no property RoamTime in object /fi/w1/wpa_supplicant1/Interfaces/3 dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/3 Having done a little research, at least the dbus errors seem to be fixed by this commit upstream: https://w1.fi/cgit/hostap/commit/wpa_supplicant/dbus/dbus_new.c?id=23d87687c2428f3b94865580b0d33e05c03e6756 So I built a version of wpa_supplicant including this particular patch and installed on my machine. Apart from solving the dbus errors completely, it seems to have had a positive impact on the frequent roaming and unstable connectivity as well (I've run for a day with no burst of roaming events at all, where they used to happen every few minutes most of the time.) ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: wpasupplicant 2:2.9-1ubuntu4 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: GNOME Date: Sat May 16 16:47:27 2020 InstallationDate: Installed on 2020-05-12 (4 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: wpa UpgradeStatus: No upgrade log present (probably fresh install) ** Also affects: wpa (Ubuntu Focal) Importance: Undecided Status: New ** Changed in: wpa (Ubuntu Focal) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wpa in Ubuntu. https://bugs.launchpad.net/bugs/1879087 Title: dbus errors, frequent roaming and unstable connectivity Status in wpa package in Ubuntu: Fix Committed Status in wpa source package in Focal: Incomplete Bug description: * Impact extra roaming events are been generated * Test case check the output of `journalctl -lu wpa_supplicant`, it should have warnings dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/3 the roaming events should not be too frequent * Regression potential check that wifi connection keep working correctly -- When using this version of wpa_supplicant with my company WPA2-Enterprise wireless setup, I'm experiencing far too frequent roaming events (even when not moving around) accompanied by hiccups in connectivity. I also see these messages in the wpa_supplicant log: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/3 dbus: wpa_dbus_property_changed: no property RoamTime in object /fi/w1/wpa_supplicant1/Interfaces/3 dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/3 Having done a little research, at least the dbus errors seem to be fixed by this commit upstream: https://w1.fi/cgit/hostap/commit/wpa_supplicant/dbus/dbus_new.c?id=23d87687c2428f3b94865580b0d33e05c03e6756 So I built a version of wpa_supplicant including this particular patch and installed on my machine. Apart from solving the dbus errors completely, it seems to have had a positive impact on the frequent roaming and unstable connectivity as well (I've run for a day with no burst of roaming events at all, where they used to happen every few minutes most of the time.) ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: wpasupplicant 2:2.9-1ubuntu4 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: GNOME Date: Sat May 16 16:47:27 2020 InstallationDate: Installed on 2020-05-12 (4 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64
[Touch-packages] [Bug 1880258] [NEW] Add trailing dot to make connectivity-check.ubuntu.com. absolute and reduce NXDOMAIN warning noise
Public bug reported: I normally don't like this, but it's a one-character change so it's easier to start with the solution: diff -u -r1.1 /usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf --- /usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf +++ /usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf @@ -1,2 +1,2 @@ [connectivity] -uri=http://connectivity-check.ubuntu.com/ +uri=http://connectivity-check.ubuntu.com./ Making this name absolute instead of relative avoids spurious resolutions of "connectivity-check.ubuntu.com.your_domain." This removes a fair amount of NXDOMAIN error noise in journalctl. Observing the issue and the fix requires 3 terminals: 1. tcpdump -i any 'port domain' 2. journalctl --boot -u systemd-resolved -f 3. nmcli c down "Wired connection 1"; nmcli c up "Wired connection 1" => observe the NXDOMAIN noise over a couple few minutes Now make the hostname absolute with the trailing dot above and run: systemctl reload NetworkManager Wait 1 min for things to stabilize. Test again: nmcli c down "Wired connection 1"; nmcli c up "Wired connection 1" => observe non-zero but significantly reduced NXDOMAIN noise over a couple few minutes Originally reported at https://askubuntu.com/a/1242611/117217 Plenty of people annoyed by NXDOMAIN warnings, just Google it. ** Affects: systemd (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1880258 Title: Add trailing dot to make connectivity-check.ubuntu.com. absolute and reduce NXDOMAIN warning noise Status in systemd package in Ubuntu: New Bug description: I normally don't like this, but it's a one-character change so it's easier to start with the solution: diff -u -r1.1 /usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf --- /usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf +++ /usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf @@ -1,2 +1,2 @@ [connectivity] -uri=http://connectivity-check.ubuntu.com/ +uri=http://connectivity-check.ubuntu.com./ Making this name absolute instead of relative avoids spurious resolutions of "connectivity-check.ubuntu.com.your_domain." This removes a fair amount of NXDOMAIN error noise in journalctl. Observing the issue and the fix requires 3 terminals: 1. tcpdump -i any 'port domain' 2. journalctl --boot -u systemd-resolved -f 3. nmcli c down "Wired connection 1"; nmcli c up "Wired connection 1" => observe the NXDOMAIN noise over a couple few minutes Now make the hostname absolute with the trailing dot above and run: systemctl reload NetworkManager Wait 1 min for things to stabilize. Test again: nmcli c down "Wired connection 1"; nmcli c up "Wired connection 1" => observe non-zero but significantly reduced NXDOMAIN noise over a couple few minutes Originally reported at https://askubuntu.com/a/1242611/117217 Plenty of people annoyed by NXDOMAIN warnings, just Google it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1880258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1875558] Re: [SRU] libproxy1-plugin-gsettings triggers a lot of warnings
Hello Corentin, or anyone else affected, Accepted libproxy into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/libproxy/0.4.15-10ubuntu1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: libproxy (Ubuntu Focal) Status: New => Fix Committed ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libproxy in Ubuntu. https://bugs.launchpad.net/bugs/1875558 Title: [SRU] libproxy1-plugin-gsettings triggers a lot of warnings Status in libproxy package in Ubuntu: Fix Released Status in libproxy source package in Focal: Fix Committed Bug description: [Impact] * The proxy configuration from GSettings is not getting exported and thus is not used by libproxy-enabled applications. * Many GLib applications are now throwing critical messages in the logs when running. This is escpecially true for WebKitGtk applications which are throwing one message by subprocess. [Test Case] * Open a WebKitGtk application such as Epiphany (GNOME Web) with the terminal and see the critical messages GLib-GObject-WARNING **: 09:00:09.217: ../../../gobject/gsignal.c:2617: signal 'changed::' is invalid for instance '0x55b923a6b430' of type 'GSettings' [Regression Potential] * No regression is to expect from this patch [Other Info] * The patch is already in debian experimental and is available since 0.4.15-12 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libproxy/+bug/1875558/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876065] Re: After unplug headphones and plug them again no sound can be heard
After I enabled "Proposed" and update pulseaudio, the problems seems to be fixed. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1876065 Title: After unplug headphones and plug them again no sound can be heard Status in pulseaudio package in Ubuntu: Fix Committed Status in pulseaudio source package in Focal: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: * Impact Sound isn't automatically redirected to headphones when those are connected to a jack interface * Test case Disconnect the headsets Start your webbrowser/music player/video player and play some sound Connect the headsets to the jack interface -> the sound should be directly redirected to the plugged headsets * Regression potential Check that audio routing when connecting/disconnecting devices to the hack entry is working correctly After startup with headset plugged in they play sound nicely - no issue. When they are unplugged, the sound is switched to the speaker (laptop) - all good. However, when I plug the headset back there is no sound. I see the app on pavucontrol, the volume is fine - everything looks fine except there is no sound. I dumped output of "pactl list" command on startup (headset plugged), after unplugging the headset, and when it is plugged back. From the comparison of these outputs, it looks like the source has got muted after the headset is plugged. Source #1 State: RUNNING Name: alsa_input.pci-_00_1f.3.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: yes Attached three outputs: headset-in.txt - after startup with headset plugged - all fine. headset-out.txt - after unplugged headset - sound through the speaker - all fine. headset-back.txt - after plugged headset back - no sound. Any help greatly appreciated. Regards, Roman To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1876065/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1427600] Re: apport-unpack: ValueError: ['UserGroups'] has no binary content
** Tags added: rls-gg-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1427600 Title: apport-unpack: ValueError: ['UserGroups'] has no binary content Status in apport package in Ubuntu: Triaged Status in apport source package in Xenial: Triaged Bug description: When running apport-unpack to get at a core dump laney@raleigh> sudo apport-unpack _usr_lib_x86_64-linux-gnu_urfkill_urfkilld.0.crash ~/temp/zozoz [sudo] password for laney: Traceback (most recent call last): File "/usr/bin/apport-unpack", line 73, in pr.extract_keys(f, bin_keys, dir) File "/usr/lib/python3/dist-packages/problem_report.py", line 253, in extract_keys [item for item, element in b64_block.items() if element is False]) ValueError: ['UserGroups'] has no binary content laney@raleigh> apport-cli --version 2.16.2 It's not terrible, because most files are unpacked (those which sort before UserGroups, I guess). ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: apport 2.16.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 ApportLog: ApportVersion: 2.16.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Tue Mar 3 10:09:26 2015 InstallationDate: Installed on 2012-10-07 (876 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20121007) PackageArchitecture: all SourcePackage: apport UpgradeStatus: Upgraded to vivid on 2013-05-07 (665 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1427600/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected
(I'm not using Ubuntu for my desktop but I'have had the same problem. I'm running Pulseaudio 13 built with enable_bluez5_native_headset and Bluez 5.54) Solved it by adding headset=native forthe module module-bluetooth-discover in default.pa : load-module module-bluetooth-discover headset=native in ~/.pulse/default.pa (or /etc/pulse/default.pa) then restarting pulseaudio with pulseaudio -k Since Pulseaudio 11.0 has ofono support, "headset=auto" option enabled by default, pactl list shows that both profiles with available: yes Generally when using VoIP application automatically switch bluetooth profile to HSP works , but when not or when switch back to A2DP need to be done annually (for me, Blueman does the job with a few clicks). Sound with HSP profile isn't very good and HFP doesn't seems to work as I haven't setup phonesimp (ref https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Bluetooth/ ) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1576559 Title: Refused to switch profile to headset_head_unit: Not connected Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm trying to connect a bluetooth-speaker-with-microphone (Mi Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't use it as a headset with microphone. The device doesn't list in the "Input Devices" by default, and using the sound settings to change the profile of the device to HSP/HFP results in this log message: W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to headset_head_unit: Not connected I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10. pulseaudio: Installed: 1:8.0-0ubuntu3 bluez: Installed: 5.37-0ubuntu5 To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1576559/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1874824] Re: pgrep reports error "cannot allocate" when run without stack limit
** Also affects: procps (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=955697 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to procps in Ubuntu. https://bugs.launchpad.net/bugs/1874824 Title: pgrep reports error "cannot allocate" when run without stack limit Status in procps package in Ubuntu: Confirmed Status in procps package in Debian: Unknown Bug description: If you have no stack limit (ulimit -S -s unlimited), any pgrep call will fail with an error: > pgrep vim pgrep: cannot allocate 4611686018427387903 bytes If you have a high stack limit (e.g. ulimit -S -s 50), pgrep is very slow: > time pgrep vim 2196 real 8.48s user 8.40s syst 0.07s busy 99% rmem 253444 The relevant upstream bug report could be: https://gitlab.com/procps-ng/procps/-/issues/152 Archlinux bug report: https://bugs.archlinux.org/task/66093 procps: Installed: 2:3.3.16-1ubuntu2 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/procps/+bug/1874824/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1867390] Re: Update libarchive to 3.4.2
3.4.2-1 is now available in groovy which will become Ubuntu 20.10. I'll open a task for Ubuntu 20.04 LTS (focal) though. ** Changed in: libarchive (Ubuntu) Status: Triaged => Fix Released ** Also affects: libarchive (Ubuntu Focal) Importance: Undecided Status: New ** Changed in: libarchive (Ubuntu Focal) Status: New => Triaged ** Changed in: libarchive (Ubuntu Focal) Importance: Undecided => Wishlist -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libarchive in Ubuntu. https://bugs.launchpad.net/bugs/1867390 Title: Update libarchive to 3.4.2 Status in libarchive package in Ubuntu: Fix Released Status in libarchive source package in Focal: Triaged Status in libarchive package in Debian: New Bug description: Please update libarchive to 3.4.2, also fixes LP: #1814109. The bug and security fixes outweighs the new features added in 3.4.1 and 3.4.2. https://github.com/libarchive/libarchive/releases Libarchive 3.4.2 is a feature and security release. New features: support for atomic file extraction (bsdtar -x --safe-writes) (#1289) support for mbed TLS (PolarSSL) (#1301) Important bugfixes: security fixes in RAR5 reader (#1280 #1326) compression buffer fix in XAR writer (#1317) fix uname and gname longer than 32 characters in PAX writer (#1319) fix segfault when archiving hard links in ISO9660 and XAR writers (#1325) fix support for extracting 7z archive entries with Delta filter (fixes LP: #1814109) (#987) Libarchive 3.4.1 is a feature and security release. New features: Unicode filename support for reading lha/lzh archives New pax write option "xattrhdr" Important bugfixes: security fixes in wide string processing (#1276 #1298) security fixes in RAR5 reader (#1212 #1217 #1296) security fixes and optimizations to write filter logic (#351) security fix related to use of readlink(2) (1dae5a5) sparse file handling fixes (#1218 #1260) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libarchive/+bug/1867390/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879980] Re: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded
List of somewhat duplicate bugs: https://bugs.launchpad.net/ubuntu/+source/mdadm/+bug/120375 (after comment #74) https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/251164 (propose some alternative solutions we can think about, like failure hooks) https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/659899 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1003309 (partially related) blog post: feeding.cloud.geek.nz/posts/the-perils-of-raid-and-full-disk- encryption-on-ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879980 Title: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded Status in cryptsetup package in Ubuntu: Confirmed Status in initramfs-tools package in Ubuntu: Confirmed Status in mdadm package in Ubuntu: Confirmed Bug description: Description will be saved for further SRU template, the details of the issue will be exposed in comments To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1879980/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879980] Re: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded
Not a debdiff - I found easier to just add the patches as in my local git repository of the packages. ** Patch added: "cryptroot patch" https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1879980/+attachment/5375734/+files/0001-d-initramfs-cryptroot-script-Allow-some-retries-on-l.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879980 Title: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded Status in cryptsetup package in Ubuntu: Confirmed Status in initramfs-tools package in Ubuntu: Confirmed Status in mdadm package in Ubuntu: Confirmed Bug description: Description will be saved for further SRU template, the details of the issue will be exposed in comments To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1879980/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879980] Re: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded
** Patch added: "mdadm patch" https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1879980/+attachment/5375736/+files/0001-script.local-block-Improve-last-resort-mechanism.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879980 Title: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded Status in cryptsetup package in Ubuntu: Confirmed Status in initramfs-tools package in Ubuntu: Confirmed Status in mdadm package in Ubuntu: Confirmed Bug description: Description will be saved for further SRU template, the details of the issue will be exposed in comments To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1879980/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879980] Re: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded
** Patch added: "initramfs-tools patch" https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1879980/+attachment/5375735/+files/0001-scripts-local-Allow-local-block-looping-as-Debian.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879980 Title: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded Status in cryptsetup package in Ubuntu: Confirmed Status in initramfs-tools package in Ubuntu: Confirmed Status in mdadm package in Ubuntu: Confirmed Bug description: Description will be saved for further SRU template, the details of the issue will be exposed in comments To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1879980/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879980] Re: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded
The issue basically is about a failure in mounting root if we have a stacked setup of LUKS on top of RAID1, when RAID1 is degraded (like a member missing). What happens in detail is a conjuncture of factors leading to this problem: (a) The initramfs script for cryptroot currently is present in two initram stages: local-top and local-block. Problem is that if the script fails on local-top phase, it panics and opens a console, not allowing the boot process to continue. In this case, subsequent scripts are not executed automatically. (b) The mdadm initramfs script to mount degraded arrays runs on local- block stage. It provides a heuristic that tries a regular array assemble for (2/3*ROOTDELAY) times, and then it assembles the array as degraded, in which is called the "poor man last resort" mechanism. So, the first and far more serious issue is cryptroot early fail at local-top phase. So an idea I've implemented to fix this was to allow some retries on local-block stage, given local-block should loop for a while running its scripts (at least according to documentation and Debian's initramfs code). But guess what ? (c) In Ubuntu, we have wait-on-root, which aims to speed-up the boot, in my shallow understanding. Basically, we have wait-for-root consuming almost all the ROOTDELAY time (30s as default, if not specified), and local-block scripts run only once. Except...mdadm, which has the previously mentioned heuristic of running 2/3*ROOTDELAY times. And for that, we have a hack on initramfs-tools to cope with mdadm (!), as per commit: salsa.debian.org/kernel-team/initramfs-tools/-/commit/033c948bb0 . So, to fix the cryptroot inability to mount root device on top a degraded RAID1 is a matter of coordinate mdadm and cryptroot, and (if my approach is taken), loop on local-block. Below are the steps I took to circumvent this long-term issue: 1) Allows cryptsetup to retry on local-block stage, relying in a heuristic based on ROOTDELAY (we try 1/4*ROOTDELAY times) and on initramfs looping at local-block phase. 2) Reduce the heuristic frequency on mdadm, in order it doesn't "beat" the cryptroot attempts, i.e., cryptroot must execute more times. for this, we reduced the heuristic for 1/5*ROOTDELAY. 3) Make local-block on Ubuntu loop again, but still rely on wait-for- root in a first step; also, I removed that mdadm heinous hack from initramfs-tools, it works without...that...if local-block loops. Below I'll submit groovy debdiffs to gather reviews on my approach. Also, a PPA with packages built, in case somebody else wanna give them a try: https://launchpad.net/~gpiccoli/+archive/ubuntu/lp1879980 Thanks, Guilherme -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879980 Title: Fail to boot with LUKS on top of RAID1 if the array is broken/degraded Status in cryptsetup package in Ubuntu: Confirmed Status in initramfs-tools package in Ubuntu: Confirmed Status in mdadm package in Ubuntu: Confirmed Bug description: Description will be saved for further SRU template, the details of the issue will be exposed in comments To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1879980/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1861941] Re: bcache by-uuid links disappear after mounting bcache0
systemd debdiff with a fix to skip creating /dev/disk/by-uuid for bcache backing, caching devices. ** Patch added: "lp1861941-skip-bcache-links.debdiff" https://bugs.launchpad.net/ubuntu/+source/bcache-tools/+bug/1861941/+attachment/5375730/+files/lp1861941-skip-bcache-links.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1861941 Title: bcache by-uuid links disappear after mounting bcache0 Status in bcache-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Incomplete Status in linux-signed package in Ubuntu: New Status in systemd package in Ubuntu: Invalid Status in bcache-tools source package in Focal: New Status in linux source package in Focal: Invalid Status in linux-signed source package in Focal: New Status in systemd source package in Focal: Invalid Status in bcache-tools source package in Groovy: Fix Released Status in linux source package in Groovy: Incomplete Status in linux-signed source package in Groovy: New Status in systemd source package in Groovy: Invalid Bug description: 1. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 2. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 root@ubuntu:~# apt-cache policy linux-image-virtual linux-image-virtual: Installed: 5.4.0.12.15 Candidate: 5.4.0.12.15 Version table: *** 5.4.0.12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@ubuntu:~# apt-cache policy linux-image-5.4.0-12-generic linux-image-5.4.0-12-generic: Installed: 5.4.0-12.15 Candidate: 5.4.0-12.15 Version table: *** 5.4.0-12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status 3. mount /dev/bcache0 && ls -al /dev/bcache/by-uuid/ + ls -al /dev/bcache/by-uuid/ total 0 drwxr-xr-x 2 root root 60 Feb 4 23:31 . drwxr-xr-x 3 root root 60 Feb 4 23:31 .. lrwxrwxrwx 1 root root 13 Feb 4 23:31 abdfd1f6-44ce-4266-91db-24667b9ae51a -> ../../bcache0 4. root@ubuntu:~# ls -al /dev/bcache/by-uuid ls: cannot access '/dev/bcache/by-uuid': No such file or directory ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-12-generic 5.4.0-12.15 ProcVersionSignature: Ubuntu 5.4.0-12.15-generic 5.4.8 Uname: Linux 5.4.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu16 Architecture: amd64 Date: Tue Feb 4 23:31:52 2020 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-5.4 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcache-tools/+bug/1861941/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1557157] Re: apparmor profile denied for saslauthd: /run/saslauthd/mux
Can you explain the configuration process for saslauthd with slapd? Or a copy of your config file would do. ** Changed in: openldap (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/1557157 Title: apparmor profile denied for saslauthd: /run/saslauthd/mux Status in openldap package in Ubuntu: Incomplete Bug description: When using slapd with saslauthd the processes communicate via the {,/var}/run/saslauthd/mux socket (this is the default location for the saslauthd server from the sasl2-bin package in the /etc/default/saslauthd config), but the apparmor profile for usr.sbin.slapd does not allow access to this socket/file. Syslog message: apparmor="DENIED" operation="connect" profile="/usr/sbin/slapd" name="/run/saslauthd/mux" pid=1880 4 comm="slapd" requested_mask="r" denied_mask="r" fsuid=108 ouid=0 Please add the following line to /etc/apparmor.d/usr.sbin.slapd: /{,var/}run/saslauthd/mux rw, Ubuntu version: Ubuntu 14.04.4 LTS slapd version: 2.4.31-1+nmu2ubu To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/1557157/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1861941] Re: bcache by-uuid links disappear after mounting bcache0
Updated test to be a bit more resilient. ** Attachment added: "test-bcache-byuuid-links-fixed.sh" https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1861941/+attachment/5375723/+files/test-bcache-byuuid-links-fixed.sh -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1861941 Title: bcache by-uuid links disappear after mounting bcache0 Status in bcache-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Incomplete Status in linux-signed package in Ubuntu: New Status in systemd package in Ubuntu: Invalid Status in bcache-tools source package in Focal: New Status in linux source package in Focal: Invalid Status in linux-signed source package in Focal: New Status in systemd source package in Focal: Invalid Status in bcache-tools source package in Groovy: Fix Released Status in linux source package in Groovy: Incomplete Status in linux-signed source package in Groovy: New Status in systemd source package in Groovy: Invalid Bug description: 1. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 2. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 root@ubuntu:~# apt-cache policy linux-image-virtual linux-image-virtual: Installed: 5.4.0.12.15 Candidate: 5.4.0.12.15 Version table: *** 5.4.0.12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@ubuntu:~# apt-cache policy linux-image-5.4.0-12-generic linux-image-5.4.0-12-generic: Installed: 5.4.0-12.15 Candidate: 5.4.0-12.15 Version table: *** 5.4.0-12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status 3. mount /dev/bcache0 && ls -al /dev/bcache/by-uuid/ + ls -al /dev/bcache/by-uuid/ total 0 drwxr-xr-x 2 root root 60 Feb 4 23:31 . drwxr-xr-x 3 root root 60 Feb 4 23:31 .. lrwxrwxrwx 1 root root 13 Feb 4 23:31 abdfd1f6-44ce-4266-91db-24667b9ae51a -> ../../bcache0 4. root@ubuntu:~# ls -al /dev/bcache/by-uuid ls: cannot access '/dev/bcache/by-uuid': No such file or directory ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-12-generic 5.4.0-12.15 ProcVersionSignature: Ubuntu 5.4.0-12.15-generic 5.4.8 Uname: Linux 5.4.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu16 Architecture: amd64 Date: Tue Feb 4 23:31:52 2020 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-5.4 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcache-tools/+bug/1861941/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1861941] Re: bcache by-uuid links disappear after mounting bcache0
Tarball of a source package with a fix for this issue: bcache-tools_1.0.8.orig.tar.gz bcache-tools_1.0.8-4ubuntu1_amd64.build bcache-tools_1.0.8-4ubuntu1_amd64.buildinfo bcache-tools_1.0.8-4ubuntu1_amd64.changes bcache-tools_1.0.8-4ubuntu1_amd64.deb bcache-tools_1.0.8-4ubuntu1.debian.tar.xz bcache-tools_1.0.8-4ubuntu1.dsc bcache-tools_1.0.8-4ubuntu1_source.build bcache-tools_1.0.8-4ubuntu1_source.buildinfo bcache-tools_1.0.8-4ubuntu1_source.changes bcache-tools-dbgsym_1.0.8-4ubuntu1_amd64.ddeb bcache-tools-debdiff-1.0.8-4_to_1.0.8-4ubuntu1 ** Attachment added: "bcache-tools-fix-lp1861941.tar.gz" https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1861941/+attachment/5375721/+files/bcache-tools-fix-lp1861941.tar.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1861941 Title: bcache by-uuid links disappear after mounting bcache0 Status in bcache-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Incomplete Status in linux-signed package in Ubuntu: New Status in systemd package in Ubuntu: Invalid Status in bcache-tools source package in Focal: New Status in linux source package in Focal: Invalid Status in linux-signed source package in Focal: New Status in systemd source package in Focal: Invalid Status in bcache-tools source package in Groovy: Fix Released Status in linux source package in Groovy: Incomplete Status in linux-signed source package in Groovy: New Status in systemd source package in Groovy: Invalid Bug description: 1. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 2. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 root@ubuntu:~# apt-cache policy linux-image-virtual linux-image-virtual: Installed: 5.4.0.12.15 Candidate: 5.4.0.12.15 Version table: *** 5.4.0.12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@ubuntu:~# apt-cache policy linux-image-5.4.0-12-generic linux-image-5.4.0-12-generic: Installed: 5.4.0-12.15 Candidate: 5.4.0-12.15 Version table: *** 5.4.0-12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status 3. mount /dev/bcache0 && ls -al /dev/bcache/by-uuid/ + ls -al /dev/bcache/by-uuid/ total 0 drwxr-xr-x 2 root root 60 Feb 4 23:31 . drwxr-xr-x 3 root root 60 Feb 4 23:31 .. lrwxrwxrwx 1 root root 13 Feb 4 23:31 abdfd1f6-44ce-4266-91db-24667b9ae51a -> ../../bcache0 4. root@ubuntu:~# ls -al /dev/bcache/by-uuid ls: cannot access '/dev/bcache/by-uuid': No such file or directory ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-12-generic 5.4.0-12.15 ProcVersionSignature: Ubuntu 5.4.0-12.15-generic 5.4.8 Uname: Linux 5.4.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu16 Architecture: amd64 Date: Tue Feb 4 23:31:52 2020 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-5.4 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcache-tools/+bug/1861941/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1861941] Re: bcache by-uuid links disappear after mounting bcache0
debdiff of the changes ** Attachment added: "bcache-tools-debdiff-1.0.8-4_to_1.0.8-4ubuntu1" https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1861941/+attachment/5375722/+files/bcache-tools-debdiff-1.0.8-4_to_1.0.8-4ubuntu1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1861941 Title: bcache by-uuid links disappear after mounting bcache0 Status in bcache-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Incomplete Status in linux-signed package in Ubuntu: New Status in systemd package in Ubuntu: Invalid Status in bcache-tools source package in Focal: New Status in linux source package in Focal: Invalid Status in linux-signed source package in Focal: New Status in systemd source package in Focal: Invalid Status in bcache-tools source package in Groovy: Fix Released Status in linux source package in Groovy: Incomplete Status in linux-signed source package in Groovy: New Status in systemd source package in Groovy: Invalid Bug description: 1. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 2. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 root@ubuntu:~# apt-cache policy linux-image-virtual linux-image-virtual: Installed: 5.4.0.12.15 Candidate: 5.4.0.12.15 Version table: *** 5.4.0.12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@ubuntu:~# apt-cache policy linux-image-5.4.0-12-generic linux-image-5.4.0-12-generic: Installed: 5.4.0-12.15 Candidate: 5.4.0-12.15 Version table: *** 5.4.0-12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status 3. mount /dev/bcache0 && ls -al /dev/bcache/by-uuid/ + ls -al /dev/bcache/by-uuid/ total 0 drwxr-xr-x 2 root root 60 Feb 4 23:31 . drwxr-xr-x 3 root root 60 Feb 4 23:31 .. lrwxrwxrwx 1 root root 13 Feb 4 23:31 abdfd1f6-44ce-4266-91db-24667b9ae51a -> ../../bcache0 4. root@ubuntu:~# ls -al /dev/bcache/by-uuid ls: cannot access '/dev/bcache/by-uuid': No such file or directory ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-12-generic 5.4.0-12.15 ProcVersionSignature: Ubuntu 5.4.0-12.15-generic 5.4.8 Uname: Linux 5.4.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu16 Architecture: amd64 Date: Tue Feb 4 23:31:52 2020 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-5.4 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcache-tools/+bug/1861941/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879987] Re: machine get stuck at boot if specified 'console=ttyS* ' doesn't exist.
*** This bug is a duplicate of bug 1573095 *** https://bugs.launchpad.net/bugs/1573095 Sorry, dup of LP #1573095. ** This bug has been marked a duplicate of bug 1573095 Cloud images fail to boot when a serial port is not available -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879987 Title: machine get stuck at boot if specified 'console=ttyS* ' doesn't exist. Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Incomplete Bug description: kernel get stucks at boot if console=ttyS* is specified in the kernel cmdline and that serial HW isn't available on the system. Reproduced with: 4.4 (from Xenial), 4.15 (from Bionic), 5.4 (native, Focal) and 5.7-next (mainline) Removing the non-existent 'console=ttyS*' parameter fixes the situation. I tested it using KVM/qemu, but it has been brought to my attention that it was reproducible in VMware as well. I think it is safe to say that it is unlikely to be specifics to a certain virtualization technology type. Didn't test on baremetal yet. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1879987/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879987] Re: machine get stuck at boot if specified 'console=ttyS* ' doesn't exist.
*** This bug is a duplicate of bug 1573095 *** https://bugs.launchpad.net/bugs/1573095 Eric, I'll close this LP as dup of #1879987 - seems it's the same issue. I'll try also the Debian release top see what's different there...we can comment in the other bug about Debian status and what are the differences. Thanks, Guilherme -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879987 Title: machine get stuck at boot if specified 'console=ttyS* ' doesn't exist. Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Incomplete Bug description: kernel get stucks at boot if console=ttyS* is specified in the kernel cmdline and that serial HW isn't available on the system. Reproduced with: 4.4 (from Xenial), 4.15 (from Bionic), 5.4 (native, Focal) and 5.7-next (mainline) Removing the non-existent 'console=ttyS*' parameter fixes the situation. I tested it using KVM/qemu, but it has been brought to my attention that it was reproducible in VMware as well. I think it is safe to say that it is unlikely to be specifics to a certain virtualization technology type. Didn't test on baremetal yet. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1879987/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879768] Re: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport/whoopsie-upload-all@162:collect_info:process_report:add_gdb_info:crash_signature_addresses:_ad
The fix that was used for https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1866347, found in apport's focal branch r2748, works around this by not creating a crash address signature if ProcMaps contains a "Permission denied" error. However, I now wonder why permission was denied. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1879768 Title: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport /whoopsie-upload- all@162:collect_info:process_report:add_gdb_info:crash_signature_addresses:_address_to_offset:_build_proc_maps_cache Status in apport package in Ubuntu: Confirmed Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding apport. This problem was most recently seen with package version 2.20.11-0ubuntu27, the problem page at https://errors.ubuntu.com/problem/273e9176fa4ab3b0cd738b3fa4e782fabc3957a4 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1879768/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879206] Re: cups hplip not install printer
I tried installing a printer via GUI after the last suggested commands. Then I gave the commands: ~$ ls -l /var/log/cups/* -rw-r- 1 root adm 5058 mag 22 21:37 /var/log/cups/access_log -rw-r- 1 root adm 1962 mag 20 00:00 /var/log/cups/access_log.1 -rw-r- 1 root adm 7883 mag 18 22:52 /var/log/cups/access_log.2.gz -rw-r- 1 root adm 642 mag 22 21:36 /var/log/cups/error_log -rw-r- 1 root adm 458 mag 20 00:00 /var/log/cups/error_log.1 -rw-r- 1 root adm 2352 mag 18 18:53 /var/log/cups/error_log.2.gz ~$ lpinfo -v file cups-brf:/ network beh network ipps network ipp network socket network lpd network https direct hp:/usb/DeskJet_3630_series?serial=CN8AM7H3230658 serial serial:/dev/ttyS0?baud=115200 network http direct hpfax network dnssd://HP%20DeskJet%203630%20series%20%5B9B20BB%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f439099b20bb network socket://192.168.1.249:9100 network ipp://HP%20DeskJet%203630%20series%20%5B9B20BB%5D._ipp._tcp.local/ -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1879206 Title: cups hplip not install printer Status in cups package in Ubuntu: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After upgrading to Ubuntu 20.04 I can't print anymore. Description: Ubuntu 20.04 LTS Release: 20.04 cups: Installato: 2.3.1-9ubuntu1.1 Candidato: 2.3.1-9ubuntu1.1 Tabella versione: *** 2.3.1-9ubuntu1.1 500 500 http://it.archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages 100 /var/lib/dpkg/status 2.3.1-9ubuntu1 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages hplip: Installato: 3.20.3+dfsg0-2 Candidato: 3.20.3+dfsg0-2 Tabella versione: *** 3.20.3+dfsg0-2 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status I tried to reinstall the printer, but it is not being re-saved by cups / hplip ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: cups 2.3.1-9ubuntu1.1 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon May 18 02:24:07 2020 InstallationDate: Installed on 2020-05-17 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lpstat: device for DeskJet_3630: hp:/usb/DeskJet_3630_series?serial=CN8AM7H3230658 MachineType: LENOVO 80G0 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/DeskJet_3630.ppd'] failed with exit code 2: grep: /etc/cups/ppd/DeskJet_3630.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic root=UUID=6a8469e0-ecea-4a86-8040-b0caaa938fe4 ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/18/2014 dmi.bios.vendor: LENOVO dmi.bios.version: A7CN40WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: Lancer 5A6 dmi.board.vendor: LENOVO dmi.board.version: SDK0F82993WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo G50-30 dmi.modalias: dmi:bvnLENOVO:bvrA7CN40WW:bd07/18/2014:svnLENOVO:pn80G0:pvrLenovoG50-30:rvnLENOVO:rnLancer5A6:rvrSDK0F82993WIN:cvnLENOVO:ct10:cvrLenovoG50-30: dmi.product.family: IDEAPAD dmi.product.name: 80G0 dmi.product.sku: LENOVO_MT_80G0_BU_idea_FM_Lenovo G50-30 dmi.product.version: Lenovo G50-30 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1879206/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879206] Re: cups hplip not install printer
stefano@stefano-Lenovo-G50-30:~$ lpadmin -p DJ3630 -E -v ipp://DeskJet%203630%20series%20%5BCN8AM7H3230658%5D._ipp._tcp.local/ -m everywhere lpadmin: Unable to connect to "stefano-Lenovo-G50-30.local:6": Argomento non valido -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1879206 Title: cups hplip not install printer Status in cups package in Ubuntu: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After upgrading to Ubuntu 20.04 I can't print anymore. Description: Ubuntu 20.04 LTS Release: 20.04 cups: Installato: 2.3.1-9ubuntu1.1 Candidato: 2.3.1-9ubuntu1.1 Tabella versione: *** 2.3.1-9ubuntu1.1 500 500 http://it.archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages 100 /var/lib/dpkg/status 2.3.1-9ubuntu1 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages hplip: Installato: 3.20.3+dfsg0-2 Candidato: 3.20.3+dfsg0-2 Tabella versione: *** 3.20.3+dfsg0-2 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status I tried to reinstall the printer, but it is not being re-saved by cups / hplip ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: cups 2.3.1-9ubuntu1.1 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon May 18 02:24:07 2020 InstallationDate: Installed on 2020-05-17 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lpstat: device for DeskJet_3630: hp:/usb/DeskJet_3630_series?serial=CN8AM7H3230658 MachineType: LENOVO 80G0 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/DeskJet_3630.ppd'] failed with exit code 2: grep: /etc/cups/ppd/DeskJet_3630.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic root=UUID=6a8469e0-ecea-4a86-8040-b0caaa938fe4 ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/18/2014 dmi.bios.vendor: LENOVO dmi.bios.version: A7CN40WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: Lancer 5A6 dmi.board.vendor: LENOVO dmi.board.version: SDK0F82993WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo G50-30 dmi.modalias: dmi:bvnLENOVO:bvrA7CN40WW:bd07/18/2014:svnLENOVO:pn80G0:pvrLenovoG50-30:rvnLENOVO:rnLancer5A6:rvrSDK0F82993WIN:cvnLENOVO:ct10:cvrLenovoG50-30: dmi.product.family: IDEAPAD dmi.product.name: 80G0 dmi.product.sku: LENOVO_MT_80G0_BU_idea_FM_Lenovo G50-30 dmi.product.version: Lenovo G50-30 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1879206/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879206] Re: cups hplip not install printer
Could you try: lpadmin -p DJ3630 -E -v ipp://DeskJet%203630%20series%20%5BCN8AM7H3230658%5D._ipp._tcp.local/ -m everywhere -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1879206 Title: cups hplip not install printer Status in cups package in Ubuntu: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After upgrading to Ubuntu 20.04 I can't print anymore. Description: Ubuntu 20.04 LTS Release: 20.04 cups: Installato: 2.3.1-9ubuntu1.1 Candidato: 2.3.1-9ubuntu1.1 Tabella versione: *** 2.3.1-9ubuntu1.1 500 500 http://it.archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages 100 /var/lib/dpkg/status 2.3.1-9ubuntu1 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages hplip: Installato: 3.20.3+dfsg0-2 Candidato: 3.20.3+dfsg0-2 Tabella versione: *** 3.20.3+dfsg0-2 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status I tried to reinstall the printer, but it is not being re-saved by cups / hplip ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: cups 2.3.1-9ubuntu1.1 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon May 18 02:24:07 2020 InstallationDate: Installed on 2020-05-17 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lpstat: device for DeskJet_3630: hp:/usb/DeskJet_3630_series?serial=CN8AM7H3230658 MachineType: LENOVO 80G0 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/DeskJet_3630.ppd'] failed with exit code 2: grep: /etc/cups/ppd/DeskJet_3630.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic root=UUID=6a8469e0-ecea-4a86-8040-b0caaa938fe4 ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/18/2014 dmi.bios.vendor: LENOVO dmi.bios.version: A7CN40WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: Lancer 5A6 dmi.board.vendor: LENOVO dmi.board.version: SDK0F82993WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo G50-30 dmi.modalias: dmi:bvnLENOVO:bvrA7CN40WW:bd07/18/2014:svnLENOVO:pn80G0:pvrLenovoG50-30:rvnLENOVO:rnLancer5A6:rvrSDK0F82993WIN:cvnLENOVO:ct10:cvrLenovoG50-30: dmi.product.family: IDEAPAD dmi.product.name: 80G0 dmi.product.sku: LENOVO_MT_80G0_BU_idea_FM_Lenovo G50-30 dmi.product.version: Lenovo G50-30 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1879206/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879206] Re: cups hplip not install printer
~$ sudo apt install --reinstall printer-driver-hpcups printer-driver-postscript-hp libsane-hpaio hplip-gui hplip hplip-data libhpmud0 Lettura elenco dei pacchetti... Fatto Generazione albero delle dipendenze Lettura informazioni sullo stato... Fatto Pacchetti suggeriti: hplip-doc I seguenti pacchetti NUOVI saranno installati: hplip hplip-data hplip-gui libsane-hpaio printer-driver-postscript-hp 0 aggiornati, 5 installati, 2 reinstallati, 0 da rimuovere e 25 non aggiornati. È necessario scaricare 1.122 kB/8.271 kB di archivi. Dopo quest'operazione, verranno occupati 14,3 MB di spazio su disco. Scaricamento di:1 http://it.archive.ubuntu.com/ubuntu focal/main amd64 printer-driver-postscript-hp amd64 3.20.3+dfsg0-2 [1.122 kB] Recuperati 1.122 kB in 1s (2.204 kB/s) Selezionato il pacchetto hplip-data non precedentemente selezionato. (Lettura del database... 226807 file e directory attualmente installati.) Preparativi per estrarre .../0-hplip-data_3.20.3+dfsg0-2_all.deb... Estrazione di hplip-data (3.20.3+dfsg0-2)... Selezionato il pacchetto libsane-hpaio:amd64 non precedentemente selezionato. Preparativi per estrarre .../1-libsane-hpaio_3.20.3+dfsg0-2_amd64.deb... Estrazione di libsane-hpaio:amd64 (3.20.3+dfsg0-2)... Selezionato il pacchetto hplip non precedentemente selezionato. Preparativi per estrarre .../2-hplip_3.20.3+dfsg0-2_amd64.deb... Estrazione di hplip (3.20.3+dfsg0-2)... Selezionato il pacchetto hplip-gui non precedentemente selezionato. Preparativi per estrarre .../3-hplip-gui_3.20.3+dfsg0-2_all.deb... Estrazione di hplip-gui (3.20.3+dfsg0-2)... Preparativi per estrarre .../4-libhpmud0_3.20.3+dfsg0-2_amd64.deb... Estrazione di libhpmud0:amd64 (3.20.3+dfsg0-2) su (3.20.3+dfsg0-2)... Preparativi per estrarre .../5-printer-driver-hpcups_3.20.3+dfsg0-2_amd64.deb... Estrazione di printer-driver-hpcups (3.20.3+dfsg0-2) su (3.20.3+dfsg0-2)... Selezionato il pacchetto printer-driver-postscript-hp non precedentemente selezi onato. Preparativi per estrarre .../6-printer-driver-postscript-hp_3.20.3+dfsg0-2_amd64 .deb... Estrazione di printer-driver-postscript-hp (3.20.3+dfsg0-2)... Configurazione di hplip-data (3.20.3+dfsg0-2)... Configurazione di printer-driver-postscript-hp (3.20.3+dfsg0-2)... Configurazione di libhpmud0:amd64 (3.20.3+dfsg0-2)... Configurazione di libsane-hpaio:amd64 (3.20.3+dfsg0-2)... Configurazione di printer-driver-hpcups (3.20.3+dfsg0-2)... Configurazione di hplip (3.20.3+dfsg0-2)... Creating/updating hplip user account... Configurazione di hplip-gui (3.20.3+dfsg0-2)... Elaborazione dei trigger per bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu2)... Rebuilding /usr/share/applications/bamf-2.index... Elaborazione dei trigger per desktop-file-utils (0.24-1ubuntu2)... Elaborazione dei trigger per mime-support (3.64ubuntu1)... Elaborazione dei trigger per cups (2.3.1-9ubuntu1.1)... Elaborazione dei trigger per gnome-menus (3.36.0-1ubuntu1)... Elaborazione dei trigger per libc-bin (2.31-0ubuntu9)... Elaborazione dei trigger per man-db (2.9.1-1)... Elaborazione dei trigger per dbus (1.12.16-2ubuntu2)... stefano@stefano-Lenovo-G50-30:~$ lpadmin -x DeskJet_3630 stefano@stefano-Lenovo-G50-30:~$lpadmin -x HP_DeskJet_3630_series stefano@stefano-Lenovo-G50-30:~$ lpstat -v lpstat: Nessuna destinazione aggiunta. ~$ lpadmin -p DJ3630 -E -v ipp://HP%20DeskJet%203630%20series%20%5B9B20BB%5D._ipp._tcp.local/ -m everywhere lpadmin: Unable to connect to "HPF439099B20BB.local:631": Operazione ora in corso There is no driver for any printer. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1879206 Title: cups hplip not install printer Status in cups package in Ubuntu: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After upgrading to Ubuntu 20.04 I can't print anymore. Description: Ubuntu 20.04 LTS Release: 20.04 cups: Installato: 2.3.1-9ubuntu1.1 Candidato: 2.3.1-9ubuntu1.1 Tabella versione: *** 2.3.1-9ubuntu1.1 500 500 http://it.archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages 100 /var/lib/dpkg/status 2.3.1-9ubuntu1 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages hplip: Installato: 3.20.3+dfsg0-2 Candidato: 3.20.3+dfsg0-2 Tabella versione: *** 3.20.3+dfsg0-2 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status I tried to reinstall the printer, but it is not being re-saved by cups / hplip ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: cups 2.3.1-9ubuntu1.1 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip
[Touch-packages] [Bug 1875927] Re: add support for phys_port_name attribute in Xenial/16.04LTS
** Changed in: systemd (Ubuntu Xenial) Status: In Progress => Won't Fix ** Changed in: systemd (Ubuntu Xenial) Assignee: Eric Desrochers (slashd) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1875927 Title: add support for phys_port_name attribute in Xenial/16.04LTS Status in systemd package in Ubuntu: Fix Released Status in systemd source package in Xenial: Won't Fix Bug description: [Impact] In Xenial/16.04LTS, one can't generate network interface name from "phys_port_name" attribute. "phys_port_name" indicates the interface physical port name within the NIC. [Test Case] Check that udev (systemd-udevd) provides the phys_port_name property Tests should be done on kernel versions: v4.15 (HWE) # cat /sys/class/net//phys_port_name yyy Look if interface name contains the 'phys_port_name': $ ip link show 3: ens3nyyy: ... [Regression Potential] * This piece of code is already in place in Bionic (systemd) and late. AFAICT, nothing has been reported since then with regards to this feature. * phys_port_name kernel support has been introduced in v4.1, but none of the current v4.4 Xenial kernel drivers uses it (minus rocker which is a test bed software switch for devel work on switchdev, it has no real function) # Xenial - kernel v4.4 config-4.4.0-142-generic:# CONFIG_NET_SWITCHDEV is not set No drivers uses the phys_port_name method at all + NET_SWITCHDEV is not even turned on. # Xenial HWE - kernel v4.15 config-4.15.0-99-generic:CONFIG_NET_SWITCHDEV=y Meaning if a regression arise, it will be limited to the HWE kernel (v4.15) and to the "Ethernet switch device driver model (switchdev)": mlx5 mlxsw bnxt sfc (solarflar) -- drivers/net/ethernet: -- broadcom/bnxt/bnxt_vfr.c: .ndo_get_phys_port_name = bnxt_vf_rep_get_phys_port_name broadcom/bnxt/bnxt.c: .ndo_get_phys_port_name = bnxt_get_phys_port_name cavium/liquidio/lio_vf_rep.c: .ndo_get_phys_port_name = lio_vf_rep_phys_port_name, mellanox/mlx5/core/en_rep.c: .ndo_get_phys_port_name = mlx5e_rep_get_phys_port_name, mellanox/mlxsw/switchx2.c:.ndo_get_phys_port_name = mlxsw_sx_port_get_phys_port_name, mellanox/mlxsw/spectrum.c:.ndo_get_phys_port_name = mlxsw_sp_port_get_phys_port_name, netronome/nfp/nfp_net_repr.c: .ndo_get_phys_port_name = nfp_port_get_phys_port_name, netronome/nfp/nfp_net_common.c: .ndo_get_phys_port_name = nfp_port_get_phys_port_name, rocker/rocker_main.c: .ndo_get_phys_port_name = rocker_port_get_phys_port_name, sfc/efx.c:.ndo_get_phys_port_name = efx_get_phys_port_name, -- # On other more specific kernels the regression potential can be expanded to virtio-net driver as well. # cloud-init may taint the result as it renames switchdev(s) after systemd at first initialization (even without the phys_port_name support) as follows: (Testing on a sfc card / server deployed by MAAS) syslog:May 20 22:12:43 OBFUSCATED_HOST kernel: [ 36.199674] sfc :08:00.1 ens1f1: renamed from eth1 ## systemd syslog:May 20 22:12:43 OBFUSCATED_HOST kernel: [ 37.128236] sfc :08:00.0 ens1f0: renamed from eth0 ## systemd syslog:May 20 22:12:43 OBFUSCATED_HOST kernel: [ 84.653460] sfc :08:00.0 ens1f0np0: renamed from ens1f0 ## cloud-init syslog:May 20 22:12:43 OBFUSCATED_HOST kernel: [ 84.697177] sfc :08:00.1 ens1f1np1: renamed from ens1f1 ## cloud-init cloud-init.log:2020-05-20 22:04:53,980 - util.py[DEBUG]: Running command ['ip', 'link', 'set', 'ens1f0', 'name', 'ens1f0np0'] with allowed return codes [0] (shell=False, capture=True) cloud-init.log:2020-05-20 22:04:54,016 - util.py[DEBUG]: Running command ['ip', 'link', 'set', 'ens1f1', 'name', 'ens1f1np1'] with allowed return codes [0] (shell=False, capture=True) systemd: ... OBFUSCATED_HOST systemd[1]: sys-subsystem-net-devices-ens1f1.device: Dev sys-subsystem-net-devices-ens1f1.device appeared twice with different sysfs paths /sys/devices/pci:00/:00:03.0/:08:00.1/net/ens1f1 and /sys/devices/pci:00/:00:03.0/:08:00.1/net/ens1f1np1 # 1 concern was raise here by ddstreet: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1875927/comments/1 Here's the result of the test I have performed: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1875927/comments/5 This change indeed rename existing switchdev interfaces to add the 'phys_port_name' (if any) into it. I'm afraid this will be a non- acceptable behaviour change in stable release and won't be SRU'able. More discussion on this topic to come [Other informations] https://github.com/systemd/systemd/commit/4887b656c22af059d4e833de7b56544f24951184 https://github.com/systemd/systemd/pull/4506 [Original Description] It has been brought to
[Touch-packages] [Bug 1872564] Re: /proc/sys/kernel/random/boot_id rule missing from abstractions/nameservice
** Merge proposal unlinked: https://code.launchpad.net/~sergiodj/ubuntu/+source/apparmor/+git/apparmor/+merge/383796 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1872564 Title: /proc/sys/kernel/random/boot_id rule missing from abstractions/nameservice Status in apparmor package in Ubuntu: Fix Released Status in apparmor source package in Focal: Fix Committed Bug description: [Impact] On a default Focal install, systemd is used when looking up passwd and group information: # grep systemd /etc/nsswitch.conf passwd: files systemd group: files systemd Daemons confined by Apparmor that also query those "databases" will cause this Apparmor denial: audit: type=1400 audit(1586825456.411:247): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=7370 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 Many daemons confined by Apparmor also happen to downgrade their privileges so they always end up looking up user/group information. To fix this problem, we had to backport an upstream patch which adds new directives to the 'nameservices' apparmor profile. [Test Case] In order to reproduce the bug, one can: 1) launch a Focal container (named fb1 here) $ lxc launch images:ubuntu/focal fb1 2) setup apparmor inside the container (already done on official Ubuntu images) $ lxc exec fb1 -- apt update && lxc exec fb1 -- apt install apparmor -y 3) install bind9 $ lxc exec fb1 -- apt install bind9 -y 4) check kernel logs for DENIED $ journalctl -o cat -b0 -k | grep 'apparmor="DENIED"' | grep -F 'profile="/usr/sbin/named"' or, depending on how logging is configured: $ dmesg | grep 'apparmor="DENIED"' | grep -F 'profile="/usr/sbin/named"' Step 4, should not return anything. Because systemd is involved in the user/group lookups, it currently returns the following: audit: type=1400 audit(1586826072.115:266): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:267): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:268): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:269): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:270): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 [Regression Potential] In order to fix this issue, 3 separate patches had to be backported. They are simple and self-contained, especially two of them, whose purposes are to add the definition of the @{run} variable and then to add a trailing slash at the end of the "/run" pathname. The other patch, albeit very simple, adds three statements to the 'nameservice' profile in order to let processes access (read-only) files under "/run/systemd/userdb" and "/proc/sys/kernel/random/boot_id". After thinking about the possible cases, the only possible problem I could envision was for a program that, not being able to access some of these files before, will now be able to do that and therefore exercise a part of its codebase which was not being used, possibly uncovering latent bugs in this software. But this is not a regression of apparmor per se. [Original Description] (Description and Test Case were moved above) # Workaround 1) remove systemd from nsswitch.conf $ lxc exec fb1 -- sed -i 's/ systemd$/ # systemd/' /etc/nsswitch.conf 2) restart named $ lxc exec fb1 -- service named restart 3) notice no more denials in kernel logs # Additional information root@fb1:~# apt-cache policy apparmor apparmor: Installed: 2.13.3-7ubuntu4 Candidate: 2.13.3-7ubuntu4 Version table: *** 2.13.3-7ubuntu4 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@fb1:~# uname -a Linux fb1 5.3.0-46-generic #38~18.04.1-Ubuntu SMP Tue Mar 31
[Touch-packages] [Bug 1861941] Re: bcache by-uuid links disappear after mounting bcache0
OK. I've reviewed the kernel code, and there are no unexpected changes w.r.t the CACHED_UUID change event. So I don't think we will need any kernel changes which is good. With the small change to the 60-persistent-storage.rules to not attempt to create a /dev/disk/by-uuid symlink for the backing device; instead we want to only create a /dev/bcache/by-uuid symlink to the bcacheN device (that is associated with the backing device). # by-label/by-uuid links (filesystem metadata), skip bcache backing,caching devices, handled in 69-bcache.rules ENV{ID_FS_TYPE}=="bcache", GOTO="skip_fs_uuid_enc" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" LABEL="skip_fs_uuid_enc" And then with my previously proposed changed to 69-bcache.rules in place https://github.com/g2p/bcache-tools/pull/29/files The test-case works just fine. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1861941 Title: bcache by-uuid links disappear after mounting bcache0 Status in bcache-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Incomplete Status in linux-signed package in Ubuntu: New Status in systemd package in Ubuntu: Invalid Status in bcache-tools source package in Focal: New Status in linux source package in Focal: Invalid Status in linux-signed source package in Focal: New Status in systemd source package in Focal: Invalid Status in bcache-tools source package in Groovy: Fix Released Status in linux source package in Groovy: Incomplete Status in linux-signed source package in Groovy: New Status in systemd source package in Groovy: Invalid Bug description: 1. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 2. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 root@ubuntu:~# apt-cache policy linux-image-virtual linux-image-virtual: Installed: 5.4.0.12.15 Candidate: 5.4.0.12.15 Version table: *** 5.4.0.12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@ubuntu:~# apt-cache policy linux-image-5.4.0-12-generic linux-image-5.4.0-12-generic: Installed: 5.4.0-12.15 Candidate: 5.4.0-12.15 Version table: *** 5.4.0-12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status 3. mount /dev/bcache0 && ls -al /dev/bcache/by-uuid/ + ls -al /dev/bcache/by-uuid/ total 0 drwxr-xr-x 2 root root 60 Feb 4 23:31 . drwxr-xr-x 3 root root 60 Feb 4 23:31 .. lrwxrwxrwx 1 root root 13 Feb 4 23:31 abdfd1f6-44ce-4266-91db-24667b9ae51a -> ../../bcache0 4. root@ubuntu:~# ls -al /dev/bcache/by-uuid ls: cannot access '/dev/bcache/by-uuid': No such file or directory ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-12-generic 5.4.0-12.15 ProcVersionSignature: Ubuntu 5.4.0-12.15-generic 5.4.8 Uname: Linux 5.4.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu16 Architecture: amd64 Date: Tue Feb 4 23:31:52 2020 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-5.4 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcache-tools/+bug/1861941/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880209] Re: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand.
Just fixed, it might take a few minutes or hours to update on the site. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/1880209 Title: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand. Status in Ubuntu Server Guide: Fix Released Status in openldap package in Ubuntu: New Bug description: Installing slapd and ldap-utils results in missing backend dn: olcBackend={0}mdb,cn=config the installer skips the installation step. Has to be added by ldpamodify. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: slapd 2.4.49+dfsg-2ubuntu1.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CNConfig: Error: command ['pkexec', '/usr/bin/ldapsearch', '-Q', '-LLL', '-Y EXTERNAL', '-H ldapi:///', '-b cn=config'] failed with exit code 127: polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie Error executing command as another user: Not authorized This incident has been reported. CasperMD5CheckResult: skip Date: Fri May 22 18:27:59 2020 InstallationDate: Installed on 2020-04-20 (32 days ago) InstallationMedia: Ubuntu-Server 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) SourcePackage: openldap UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/serverguide/+bug/1880209/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880209] Re: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand.
Oh, I can fix that. Let me add a server-guide task. ** Also affects: serverguide Importance: Undecided Status: New ** Changed in: serverguide Assignee: (unassigned) => Andreas Hasenack (ahasenack) ** Changed in: serverguide Importance: Undecided => Low ** Changed in: serverguide Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/1880209 Title: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand. Status in Ubuntu Server Guide: Fix Released Status in openldap package in Ubuntu: New Bug description: Installing slapd and ldap-utils results in missing backend dn: olcBackend={0}mdb,cn=config the installer skips the installation step. Has to be added by ldpamodify. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: slapd 2.4.49+dfsg-2ubuntu1.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CNConfig: Error: command ['pkexec', '/usr/bin/ldapsearch', '-Q', '-LLL', '-Y EXTERNAL', '-H ldapi:///', '-b cn=config'] failed with exit code 127: polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie Error executing command as another user: Not authorized This incident has been reported. CasperMD5CheckResult: skip Date: Fri May 22 18:27:59 2020 InstallationDate: Installed on 2020-04-20 (32 days ago) InstallationMedia: Ubuntu-Server 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) SourcePackage: openldap UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/serverguide/+bug/1880209/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880209] Re: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand.
I was just following the documentation on https://ubuntu.com/server/docs /service-ldap and there it is present. It still was on 19.10. So I was just wondering. Sorry! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/1880209 Title: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand. Status in openldap package in Ubuntu: New Bug description: Installing slapd and ldap-utils results in missing backend dn: olcBackend={0}mdb,cn=config the installer skips the installation step. Has to be added by ldpamodify. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: slapd 2.4.49+dfsg-2ubuntu1.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CNConfig: Error: command ['pkexec', '/usr/bin/ldapsearch', '-Q', '-LLL', '-Y EXTERNAL', '-H ldapi:///', '-b cn=config'] failed with exit code 127: polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie Error executing command as another user: Not authorized This incident has been reported. CasperMD5CheckResult: skip Date: Fri May 22 18:27:59 2020 InstallationDate: Installed on 2020-04-20 (32 days ago) InstallationMedia: Ubuntu-Server 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) SourcePackage: openldap UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/1880209/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1880209] [NEW] slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand.
On Fri, May 22, 2020 at 04:34:52PM -, Mario Mech wrote: >Installing slapd and ldap-utils results in missing backend > >dn: olcBackend={0}mdb,cn=config > >the installer skips the installation step. Has to be added by >ldpamodify. This was done intentionally as it's much more common to configure things per-database than per-backend. What do you need the backend entry for, and why is it a problem to add it yourself? Thanks. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/1880209 Title: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand. Status in openldap package in Ubuntu: New Bug description: Installing slapd and ldap-utils results in missing backend dn: olcBackend={0}mdb,cn=config the installer skips the installation step. Has to be added by ldpamodify. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: slapd 2.4.49+dfsg-2ubuntu1.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CNConfig: Error: command ['pkexec', '/usr/bin/ldapsearch', '-Q', '-LLL', '-Y EXTERNAL', '-H ldapi:///', '-b cn=config'] failed with exit code 127: polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie Error executing command as another user: Not authorized This incident has been reported. CasperMD5CheckResult: skip Date: Fri May 22 18:27:59 2020 InstallationDate: Installed on 2020-04-20 (32 days ago) InstallationMedia: Ubuntu-Server 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) SourcePackage: openldap UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/1880209/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880209] [NEW] slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand.
Public bug reported: Installing slapd and ldap-utils results in missing backend dn: olcBackend={0}mdb,cn=config the installer skips the installation step. Has to be added by ldpamodify. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: slapd 2.4.49+dfsg-2ubuntu1.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CNConfig: Error: command ['pkexec', '/usr/bin/ldapsearch', '-Q', '-LLL', '-Y EXTERNAL', '-H ldapi:///', '-b cn=config'] failed with exit code 127: polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie Error executing command as another user: Not authorized This incident has been reported. CasperMD5CheckResult: skip Date: Fri May 22 18:27:59 2020 InstallationDate: Installed on 2020-04-20 (32 days ago) InstallationMedia: Ubuntu-Server 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) SourcePackage: openldap UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: openldap (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apparmor apport-bug focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/1880209 Title: slapd configuration does not ask for olcbackend and doesn't add one. Has to be added by hand. Status in openldap package in Ubuntu: New Bug description: Installing slapd and ldap-utils results in missing backend dn: olcBackend={0}mdb,cn=config the installer skips the installation step. Has to be added by ldpamodify. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: slapd 2.4.49+dfsg-2ubuntu1.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CNConfig: Error: command ['pkexec', '/usr/bin/ldapsearch', '-Q', '-LLL', '-Y EXTERNAL', '-H ldapi:///', '-b cn=config'] failed with exit code 127: polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie Error executing command as another user: Not authorized This incident has been reported. CasperMD5CheckResult: skip Date: Fri May 22 18:27:59 2020 InstallationDate: Installed on 2020-04-20 (32 days ago) InstallationMedia: Ubuntu-Server 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) SourcePackage: openldap UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/1880209/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1872564] Re: /proc/sys/kernel/random/boot_id rule missing from abstractions/nameservice
After pulling apparmor 2.13.3-7ubuntu5.1 from focal-proposed: Get:18 http://archive.ubuntu.com/ubuntu focal-proposed/main amd64 apparmor amd64 2.13.3-7ubuntu5.1 [494 kB] ... Unpacking apparmor (2.13.3-7ubuntu5.1) over (2.13.3-7ubuntu5) ... Setting up libapparmor1:amd64 (2.13.3-7ubuntu5.1) ... Setting up apt-utils (2.0.3) ... Setting up apparmor (2.13.3-7ubuntu5.1) ... Installing new version of config file /etc/apparmor.d/abstractions/nameservice ... Reloading AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd ... I'm happy to report the bug is fixed, thanks so much! ** Tags removed: verification-needed verification-needed-focal ** Tags added: verification-done verification-done-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1872564 Title: /proc/sys/kernel/random/boot_id rule missing from abstractions/nameservice Status in apparmor package in Ubuntu: Fix Released Status in apparmor source package in Focal: Fix Committed Bug description: [Impact] On a default Focal install, systemd is used when looking up passwd and group information: # grep systemd /etc/nsswitch.conf passwd: files systemd group: files systemd Daemons confined by Apparmor that also query those "databases" will cause this Apparmor denial: audit: type=1400 audit(1586825456.411:247): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=7370 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 Many daemons confined by Apparmor also happen to downgrade their privileges so they always end up looking up user/group information. To fix this problem, we had to backport an upstream patch which adds new directives to the 'nameservices' apparmor profile. [Test Case] In order to reproduce the bug, one can: 1) launch a Focal container (named fb1 here) $ lxc launch images:ubuntu/focal fb1 2) setup apparmor inside the container (already done on official Ubuntu images) $ lxc exec fb1 -- apt update && lxc exec fb1 -- apt install apparmor -y 3) install bind9 $ lxc exec fb1 -- apt install bind9 -y 4) check kernel logs for DENIED $ journalctl -o cat -b0 -k | grep 'apparmor="DENIED"' | grep -F 'profile="/usr/sbin/named"' or, depending on how logging is configured: $ dmesg | grep 'apparmor="DENIED"' | grep -F 'profile="/usr/sbin/named"' Step 4, should not return anything. Because systemd is involved in the user/group lookups, it currently returns the following: audit: type=1400 audit(1586826072.115:266): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:267): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:268): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:269): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:270): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 [Regression Potential] In order to fix this issue, 3 separate patches had to be backported. They are simple and self-contained, especially two of them, whose purposes are to add the definition of the @{run} variable and then to add a trailing slash at the end of the "/run" pathname. The other patch, albeit very simple, adds three statements to the 'nameservice' profile in order to let processes access (read-only) files under "/run/systemd/userdb" and "/proc/sys/kernel/random/boot_id". After thinking about the possible cases, the only possible problem I could envision was for a program that, not being able to access some of these files before, will now be able to do that and therefore exercise a part of its codebase which was not being used, possibly uncovering latent bugs in this software. But this is not a regression of apparmor per se. [Original Description] (Description and Test Case were moved above) # Workaround
[Touch-packages] [Bug 1874381] Re: LVM device unavailable after 18.04 to 20.04 upgrade Timed out waiting for device /dev/mapper/s5lp8--v g-home
You need to either execute these commands after upgrade and _before_ rebooting or chroot from a LiveUSB boot. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1874381 Title: LVM device unavailable after 18.04 to 20.04 upgrade Timed out waiting for device /dev/mapper/s5lp8--v g-home Status in Ubuntu on IBM z Systems: Confirmed Status in lvm2 package in Ubuntu: Confirmed Status in lvm2 source package in Focal: Confirmed Bug description: After upgrading an LPAR configured with LVM from 18.04 to 20.04 /home is no longer mounted. During boot the console shows Timed out waiting for device /dev/mapper/s5lp8--vg-home Please see the attached dist-upgrade logs and console output for more detail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1874381/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879206] Re: cups hplip not install printer
Please - Remove the .snap of HPLIP, it is experimental - Remove any HPLIP version installed directly from HP - Re-install Ubuntu's HPLIP via the command: sudo apt install --reinstall printer-driver-hpcups printer-driver- postscript-hp libsane-hpaio hplip-gui hplip hplip-data libhpmud0 Please post the output of this command here. - Remove your current print queues with the commands: lpadmin -x DeskJet_3630 lpadmin -x HP_DeskJet_3630_series - Unplug the printer from USB and re-plug it. Does a new print queue get created ("lpstat -v" should show it)? Can you print using this queue? - Could you create a driverless print queue (this queue does not use HPLIP but common, manufacturer-independent communication protocols of the printer)? Use the command lpadmin -p DJ3630 -E -v ipp://HP%20DeskJet%203630%20series%20%5B9B20BB%5D._ipp._tcp.local/ -m everywhere Can you print with this print queue? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1879206 Title: cups hplip not install printer Status in cups package in Ubuntu: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After upgrading to Ubuntu 20.04 I can't print anymore. Description: Ubuntu 20.04 LTS Release: 20.04 cups: Installato: 2.3.1-9ubuntu1.1 Candidato: 2.3.1-9ubuntu1.1 Tabella versione: *** 2.3.1-9ubuntu1.1 500 500 http://it.archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages 100 /var/lib/dpkg/status 2.3.1-9ubuntu1 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages hplip: Installato: 3.20.3+dfsg0-2 Candidato: 3.20.3+dfsg0-2 Tabella versione: *** 3.20.3+dfsg0-2 500 500 http://it.archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status I tried to reinstall the printer, but it is not being re-saved by cups / hplip ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: cups 2.3.1-9ubuntu1.1 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon May 18 02:24:07 2020 InstallationDate: Installed on 2020-05-17 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lpstat: device for DeskJet_3630: hp:/usb/DeskJet_3630_series?serial=CN8AM7H3230658 MachineType: LENOVO 80G0 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/DeskJet_3630.ppd'] failed with exit code 2: grep: /etc/cups/ppd/DeskJet_3630.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic root=UUID=6a8469e0-ecea-4a86-8040-b0caaa938fe4 ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/18/2014 dmi.bios.vendor: LENOVO dmi.bios.version: A7CN40WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: Lancer 5A6 dmi.board.vendor: LENOVO dmi.board.version: SDK0F82993WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo G50-30 dmi.modalias: dmi:bvnLENOVO:bvrA7CN40WW:bd07/18/2014:svnLENOVO:pn80G0:pvrLenovoG50-30:rvnLENOVO:rnLancer5A6:rvrSDK0F82993WIN:cvnLENOVO:ct10:cvrLenovoG50-30: dmi.product.family: IDEAPAD dmi.product.name: 80G0 dmi.product.sku: LENOVO_MT_80G0_BU_idea_FM_Lenovo G50-30 dmi.product.version: Lenovo G50-30 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1879206/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1874381] Re: LVM device unavailable after 18.04 to 20.04 upgrade Timed out waiting for device /dev/mapper/s5lp8--v g-home
I too tried to upgrade from 18.04 and ended up with a busybox, Ubuntu not finding my vg. Not sure how to enter those commands from a busybox Steve. Re-imaging the device with 18.04 for the time being. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1874381 Title: LVM device unavailable after 18.04 to 20.04 upgrade Timed out waiting for device /dev/mapper/s5lp8--v g-home Status in Ubuntu on IBM z Systems: Confirmed Status in lvm2 package in Ubuntu: Confirmed Status in lvm2 source package in Focal: Confirmed Bug description: After upgrading an LPAR configured with LVM from 18.04 to 20.04 /home is no longer mounted. During boot the console shows Timed out waiting for device /dev/mapper/s5lp8--vg-home Please see the attached dist-upgrade logs and console output for more detail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1874381/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1874824] Re: pgrep reports error "cannot allocate" when run without stack limit
Archlinux fixed this bug today, now in testing stage. Any news for Ubuntu? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to procps in Ubuntu. https://bugs.launchpad.net/bugs/1874824 Title: pgrep reports error "cannot allocate" when run without stack limit Status in procps package in Ubuntu: Confirmed Bug description: If you have no stack limit (ulimit -S -s unlimited), any pgrep call will fail with an error: > pgrep vim pgrep: cannot allocate 4611686018427387903 bytes If you have a high stack limit (e.g. ulimit -S -s 50), pgrep is very slow: > time pgrep vim 2196 real 8.48s user 8.40s syst 0.07s busy 99% rmem 253444 The relevant upstream bug report could be: https://gitlab.com/procps-ng/procps/-/issues/152 Archlinux bug report: https://bugs.archlinux.org/task/66093 procps: Installed: 2:3.3.16-1ubuntu2 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/procps/+bug/1874824/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1870359] Autopkgtest regression report (network-manager/1.22.10-1ubuntu2.1)
All autopkgtests for the newly accepted network-manager (1.22.10-1ubuntu2.1) for focal have finished running. The following regressions have been reported in tests triggered by the package: systemd/unknown (armhf) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/focal/update_excuses.html#network-manager [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1870359 Title: My machine as Wi-Fi Hotspot broken after upgrade to 20.04 Status in network-manager package in Ubuntu: Fix Committed Status in network-manager source package in Focal: Fix Committed Bug description: * Impact The hotspot feature fails to forward the data to the clients * Test case - log into an Ubuntu or GNOME session - connect the machine to an eth cable for internet - go to gnome-control-center -> wifi - enable the hotspot from the menu in the headerbar - connect another device to the wifi created -> the client should connect and access to internet work correctly * Regression potential the change is only updating the iptables binary location, there shouldn't be any code impact out of having the command working on systems without usrmerge when it was not before - I have a machine with a wired network connection and a wifi card. I've been using the machine as a wireless router and server in my house. I've attached a screenshot of the Wi-Fi network settings. It looks as expected. Upon updating to 20.04, none of my machines can use the connection. The linux machine will not connect. The windows machine will connect but will not have internet. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: network-manager 1.22.10-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Uname: Linux 5.4.0-21-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu22 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Apr 2 15:47:02 2020 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-09-30 (1645 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) IpRoute: default via 192.168.0.1 dev eth0 proto static metric 100 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.100 metric 100 SourcePackage: network-manager UpgradeStatus: Upgraded to focal on 2020-04-02 (0 days ago) WifiSyslog: mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-01-13T14:45:42.987041 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.22.10 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1870359/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879987] Re: machine get stuck at boot if specified 'console=ttyS* ' doesn't exist.
I tested with debian buster and I wasn't able to reproduce (w/o quiet parameter) I'm not yet too sure if it's a pure initramfs-tools or something introduced by a package hooks. I first thought that plymouth could have beeb a potential candidate, but I disabled it and even purge it and problem persisted. - Eric -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1879987 Title: machine get stuck at boot if specified 'console=ttyS* ' doesn't exist. Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Incomplete Bug description: kernel get stucks at boot if console=ttyS* is specified in the kernel cmdline and that serial HW isn't available on the system. Reproduced with: 4.4 (from Xenial), 4.15 (from Bionic), 5.4 (native, Focal) and 5.7-next (mainline) Removing the non-existent 'console=ttyS*' parameter fixes the situation. I tested it using KVM/qemu, but it has been brought to my attention that it was reproducible in VMware as well. I think it is safe to say that it is unlikely to be specifics to a certain virtualization technology type. Didn't test on baremetal yet. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1879987/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880198] [NEW] Ubuntu as bluetooth speaker - volume on bluetooth client ignored
Public bug reported: I'm using my 20.04 system as a media center. It's got a bluetooth adapter plugged into a USB port. I can connect to the system with my phone and ipad as an A2DP source and play music. The problem is that the volume on the source device is not respected When the volume on the source device goes to 0, the sound is muted as expected, but any other volume on the source device leads to the same volume on the Ubuntu server. The only way to adjust the volume is from the server. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: kodi 1455 F pulseaudio /dev/snd/controlC0: kodi 1455 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri May 22 16:42:57 2020 InstallationDate: Installed on 2015-09-30 (1695 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/04/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2404 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2404:bd03/04/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: ASUS MB dmi.product.name: All Series dmi.product.sku: All dmi.product.version: System Version dmi.sys.vendor: ASUS ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1880198 Title: Ubuntu as bluetooth speaker - volume on bluetooth client ignored Status in pulseaudio package in Ubuntu: New Bug description: I'm using my 20.04 system as a media center. It's got a bluetooth adapter plugged into a USB port. I can connect to the system with my phone and ipad as an A2DP source and play music. The problem is that the volume on the source device is not respected When the volume on the source device goes to 0, the sound is muted as expected, but any other volume on the source device leads to the same volume on the Ubuntu server. The only way to adjust the volume is from the server. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: kodi 1455 F pulseaudio /dev/snd/controlC0: kodi 1455 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri May 22 16:42:57 2020 InstallationDate: Installed on 2015-09-30 (1695 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/04/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2404 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2404:bd03/04/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: ASUS MB dmi.product.name: All Series dmi.product.sku: All dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1880198/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879211] Re: Charging my cellphone through usb breaks internet connection.
Sensible. If that were the case, a solution would rely in the capacity of the network manager to detect that the new route does not work,(and that the previous one did) My naïve solution would be to ping a reliable server (I use 8.8.8.8) and delete the new route if it timesout. Additionally, if the new cabled connection were successful initially, but later stopped working, shouldn't the network fallback to the previous connection? A similar thing already happens when multiple dns servers are specified. 2 functionalities failed for this bug to occur. (a third one if you count my phone presenting itself as a router when it can't do that, but that's not within Ubuntu's jurisdiction... is it?) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1879211 Title: Charging my cellphone through usb breaks internet connection. Status in network-manager package in Ubuntu: Incomplete Bug description: I don't know what package is responsible for this. I entered iptables because the ip command was not recognized as a package. I use the ip route to debug internet problems. Here it is before plugging my cellphone through usb: #ip route default via 192.168.0.1 dev wlp2s0 proto dhcp metric 600 25.0.0.0/8 dev ham0 proto kernel scope link src 25.69.248.65 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.0.0/24 dev wlp2s0 proto kernel scope link src 192.168.0.51 metric 600 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown Here it is after I plug my cellphone #ip route default via 192.168.42.129 dev enp0s20f0u1 proto dhcp metric 100 default via 192.168.0.1 dev wlp2s0 proto dhcp metric 600 25.0.0.0/8 dev ham0 proto kernel scope link src 25.69.248.65 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.0.0/24 dev wlp2s0 proto kernel scope link src 192.168.0.51 metric 600 192.168.42.0/24 dev enp0s20f0u1 proto kernel scope link src 192.168.42.114 metric 100 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown So my computer is trying to access all ips using my cellphone as a router, which of course fails. the command "sudo ip route del default" followed by "sudo ip route add default via 192.168.0.1 dev wlp2s0" restores my connection. Thank you for your attention. I'm available to answer any questions and fix this bug. Reporting this bug was already effort diverted from my other tasks, so let's make this count no matter how deep it cuts. P.S: I went ahead and marked this bug as a security vulnerability because I can think of ways this can be exploited, especially if the cellphone can trigger the bug and route traffic so that the user doesn't suspect it. If you feel the security impact is small and that there are other more important security issues, feel free to unmark it and we can deal with it's usability impact, which is probably more impactful. Regards, Tomás. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: iptables 1.6.1-2ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-99.100-generic 4.15.18 Uname: Linux 4.15.0-99-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.14 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun May 17 22:59:02 2020 InstallationDate: Installed on 2019-02-08 (464 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) SourcePackage: iptables UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1879211/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880190] [NEW] No sound after suspend/resume
Public bug reported: After suspend the system while Spotify was playing when I resumed again my output device was gone. Instead of "Speakers - Built in Audio" was "Dummy Output". I had to run "pulseaudio -k" to put audio working again. More info: Ubuntu Ubuntu 20.04 LTS Spotify: Version 1.1.26.501.gbe11e53b-15 (installed via snap). ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: helio 19185 F pulseaudio /dev/snd/pcmC0D0p: helio 19185 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri May 22 14:36:21 2020 InstallationDate: Installed on 2020-05-05 (16 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.11.0 dmi.board.name: 0V736W dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.11.0:bd05/14/2019:svnDellInc.:pnInspiron7560:pvr:rvnDellInc.:rn0V736W:rvrA01:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 7560 dmi.product.sku: 0782 dmi.sys.vendor: Dell Inc. ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1880190 Title: No sound after suspend/resume Status in pulseaudio package in Ubuntu: New Bug description: After suspend the system while Spotify was playing when I resumed again my output device was gone. Instead of "Speakers - Built in Audio" was "Dummy Output". I had to run "pulseaudio -k" to put audio working again. More info: Ubuntu Ubuntu 20.04 LTS Spotify: Version 1.1.26.501.gbe11e53b-15 (installed via snap). ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.2 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: helio 19185 F pulseaudio /dev/snd/pcmC0D0p: helio 19185 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri May 22 14:36:21 2020 InstallationDate: Installed on 2020-05-05 (16 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.11.0 dmi.board.name: 0V736W dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.11.0:bd05/14/2019:svnDellInc.:pnInspiron7560:pvr:rvnDellInc.:rn0V736W:rvrA01:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 7560 dmi.product.sku: 0782 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1880190/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1509717] Re: Wily LVM-RAID1 – md: personality for level 1 is not loaded
There are two things: - On servers, ubuntu-server depends on mdadm, so removing mdadm also removes ubuntu-server package, which means it's not really supported - In general, the installers don't offer installing like that. I don't know why we did not have a task for xenial. ** Description changed: [Impact] system does not boot after converting lvm volume to raid1 w/o having mdadm installed. [Test case] - 1. Install server with subiquity to LVM + 1. Install server to LVM 2. Add second disk to it 3. Run pvcreate /dev/vdb 4. Run vgextend ubuntu-vg /dev/vdb - 5. Run lvconvert -m1 --type raid1 ubuntu-vg/lv + 5. Run lvconvert -m1 --type raid1 ubuntu-vg/ubuntu-lv Reboot and check that it still boots. 6. Remove mdadm 7. Upgrade to lvm2 from proposed Reboot and check that it still boots. 8. Downgrade lvm2 to release Reboot and check that it fails to boot [Regression potential] Not really anything, we just add the raid1 module to initramfs, so it might be loaded during boot, and raid1 logical volumes might appear earlier. [Original bug report] After upgrading to Wily, raid1 LVs don't activate during the initrd phase. Since the root LV is also RAID1-mirrored, the system doesn't boot. I get the following message each time LVM tries to activate a raid1 LV: md: personality for level 1 is not loaded! Everything was fine with Vivid. I had to downgrade to Vivid kernel (3.19.0-30) to get my system to a usable state. I pretty much hope it to be a temporary workaround and I'll get the new 4.2.0 kernel work with Wily in days. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1509717 Title: Wily LVM-RAID1 – md: personality for level 1 is not loaded Status in linux package in Ubuntu: Invalid Status in lvm2 package in Ubuntu: Fix Released Status in linux source package in Bionic: Invalid Status in lvm2 source package in Bionic: Fix Released Status in linux source package in Cosmic: Invalid Status in lvm2 source package in Cosmic: Won't Fix Status in linux source package in Disco: Invalid Status in lvm2 source package in Disco: Won't Fix Status in linux source package in Eoan: Invalid Status in lvm2 source package in Eoan: Fix Released Status in lvm2 package in Debian: Incomplete Bug description: [Impact] system does not boot after converting lvm volume to raid1 w/o having mdadm installed. [Test case] 1. Install server to LVM 2. Add second disk to it 3. Run pvcreate /dev/vdb 4. Run vgextend ubuntu-vg /dev/vdb 5. Run lvconvert -m1 --type raid1 ubuntu-vg/ubuntu-lv Reboot and check that it still boots. 6. Remove mdadm 7. Upgrade to lvm2 from proposed Reboot and check that it still boots. 8. Downgrade lvm2 to release Reboot and check that it fails to boot [Regression potential] Not really anything, we just add the raid1 module to initramfs, so it might be loaded during boot, and raid1 logical volumes might appear earlier. [Original bug report] After upgrading to Wily, raid1 LVs don't activate during the initrd phase. Since the root LV is also RAID1-mirrored, the system doesn't boot. I get the following message each time LVM tries to activate a raid1 LV: md: personality for level 1 is not loaded! Everything was fine with Vivid. I had to downgrade to Vivid kernel (3.19.0-30) to get my system to a usable state. I pretty much hope it to be a temporary workaround and I'll get the new 4.2.0 kernel work with Wily in days. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1509717/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880182] [NEW] HDMI port is not working
Public bug reported: hdmi port is not working. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-101.102-generic 4.15.18 Uname: Linux 4.15.0-101-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.14 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri May 22 15:26:04 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: rtl8821ce, v5.5.2_34066.20200325, 4.15.0-101-generic, x86_64: installed rtl8821ce, v5.5.2_34066.20200325, 4.15.0-99-generic, x86_64: installed virtualbox, 5.2.34, 4.15.0-101-generic, x86_64: installed virtualbox, 5.2.34, 4.15.0-99-generic, x86_64: installed wireguard, 1.0.20200506, 4.15.0-101-generic, x86_64: installed GraphicsCard: Intel Corporation Device [8086:9b41] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:5079] InstallationDate: Installed on 2020-04-02 (50 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: LENOVO 20RD004FMH ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-101-generic root=/dev/mapper/username--vg-root ro quiet splash Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/29/2019 dmi.bios.vendor: LENOVO dmi.bios.version: R16ET21W (1.07 ) dmi.board.asset.tag: Not Available dmi.board.name: 20RD004FMH dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrR16ET21W(1.07):bd11/29/2019:svnLENOVO:pn20RD004FMH:pvrThinkPadE15:rvnLENOVO:rn20RD004FMH:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad E15 dmi.product.name: 20RD004FMH dmi.product.version: ThinkPad E15 dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101+git2005200630.bf602a~oibaf~b version.libgl1-mesa-dri: libgl1-mesa-dri 20.2~git2005220730.685e79~oibaf~b version.libgl1-mesa-glx: libgl1-mesa-glx 20.2~git2005220730.685e79~oibaf~b version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0+git2004151930.384539~oibaf~b version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git2005151930.5ca3ac~oibaf~b version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16+git2004030730.5444ca~oibaf~b ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic third-party-packages ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1880182 Title: HDMI port is not working Status in xorg package in Ubuntu: New Bug description: hdmi port is not working. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-101.102-generic 4.15.18 Uname: Linux 4.15.0-101-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.14 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri May 22 15:26:04 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: rtl8821ce, v5.5.2_34066.20200325, 4.15.0-101-generic, x86_64: installed rtl8821ce, v5.5.2_34066.20200325, 4.15.0-99-generic, x86_64: installed virtualbox, 5.2.34, 4.15.0-101-generic, x86_64: installed virtualbox, 5.2.34, 4.15.0-99-generic, x86_64: installed wireguard, 1.0.20200506, 4.15.0-101-generic, x86_64: installed GraphicsCard: Intel Corporation Device [8086:9b41] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:5079] InstallationDate: Installed on 2020-04-02 (50 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: LENOVO 20RD004FMH ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-101-generic root=/dev/mapper/username--vg-root ro quiet splash Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/29/2019 dmi.bios.vendor: LENOVO dmi.bios.version: R16ET21W (1.07 ) dmi.board.asset.tag: Not Available dmi.board.name: 20RD004FMH dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrR16ET21W(1.07):bd11/29/2019:svnLENOVO:pn20RD004FMH:pvrThinkPadE15:rvnLENOVO:rn20RD004FMH:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad E15 dmi.product.name: 20RD004FMH
[Touch-packages] [Bug 1509717] Re: Wily LVM-RAID1 – md: personality for level 1 is not loaded
Sorry, I didn't actually test Focal and Groovy. Xenial will be supported for about a year, so I think it worth to fix it there as well; however it's relative what worth to fix and what not, as most users probably left Xenial behind already or applied a workaround if they were ever affected by this issue. On the other hand it can be a real pain if you don't know about this and just happen to convert your root LV to raid1 and then your system doesn't boot. "The supported configuration for raid1 is mdadm after all, not removing mdadm and the meta packages that depend on it and using lvm's raid support." I don't know where LVM over DM-RAID is defined as the "supported configuration" as opposed to RAID1 over LVM. I always thought about them as equal alternatives for slightly different use cases. My rule of thumb is when you can afford to get identical sized disks and mirror everything, go with LVM over DM-RAID. If you can't guarantee to have identical sized disks and need a more dynamic solution, then RAID1 over LVM (i.e. using LVM's raid1 support) is more suitable. I recommend the former in productive server environments and the latter in smaller SOHO, home servers and personal computers. If one of my disks goes bye-bye, I wouldn't want to reinstall my system or lose my documents, so I have my / and /home LVs in raid1. However I couldn't care less about my Steam library because I can just re-download the games anytime, so I don't have it mirrored, as I'd rather not want it to use twice the precious disk space. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1509717 Title: Wily LVM-RAID1 – md: personality for level 1 is not loaded Status in linux package in Ubuntu: Invalid Status in lvm2 package in Ubuntu: Fix Released Status in linux source package in Bionic: Invalid Status in lvm2 source package in Bionic: Fix Released Status in linux source package in Cosmic: Invalid Status in lvm2 source package in Cosmic: Won't Fix Status in linux source package in Disco: Invalid Status in lvm2 source package in Disco: Won't Fix Status in linux source package in Eoan: Invalid Status in lvm2 source package in Eoan: Fix Released Status in lvm2 package in Debian: Incomplete Bug description: [Impact] system does not boot after converting lvm volume to raid1 w/o having mdadm installed. [Test case] 1. Install server with subiquity to LVM 2. Add second disk to it 3. Run pvcreate /dev/vdb 4. Run vgextend ubuntu-vg /dev/vdb 5. Run lvconvert -m1 --type raid1 ubuntu-vg/lv Reboot and check that it still boots. 6. Remove mdadm 7. Upgrade to lvm2 from proposed Reboot and check that it still boots. 8. Downgrade lvm2 to release Reboot and check that it fails to boot [Regression potential] Not really anything, we just add the raid1 module to initramfs, so it might be loaded during boot, and raid1 logical volumes might appear earlier. [Original bug report] After upgrading to Wily, raid1 LVs don't activate during the initrd phase. Since the root LV is also RAID1-mirrored, the system doesn't boot. I get the following message each time LVM tries to activate a raid1 LV: md: personality for level 1 is not loaded! Everything was fine with Vivid. I had to downgrade to Vivid kernel (3.19.0-30) to get my system to a usable state. I pretty much hope it to be a temporary workaround and I'll get the new 4.2.0 kernel work with Wily in days. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1509717/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1659719] Re: ssh can't call a binary from a snap without the full path
** Tags added: id-5ec69c5a5bc4156ecefb75a0 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pam in Ubuntu. https://bugs.launchpad.net/bugs/1659719 Title: ssh can't call a binary from a snap without the full path Status in Snappy: Fix Committed Status in livecd-rootfs package in Ubuntu: Fix Released Status in openssh package in Ubuntu: Confirmed Status in pam package in Ubuntu: Confirmed Status in snapd package in Ubuntu: Confirmed Status in livecd-rootfs source package in Groovy: Fix Released Status in openssh source package in Groovy: Confirmed Status in pam source package in Groovy: Confirmed Status in snapd source package in Groovy: Confirmed Bug description: ssh can't call a binary from a snap, it will only work using the full path. Let's say I have the hello snap installed in 192.168.122.24. Then: elopio@ubuntu-xenial:~/mosh$ ssh 192.168.122.24 hello elopio@192.168.122.24's password: bash: hello: command not found elopio@ubuntu-xenial:~/mosh$ ssh 192.168.122.24 /snap/bin/hello elopio@192.168.122.24's password: Hello, world! To manage notifications about this bug go to: https://bugs.launchpad.net/snappy/+bug/1659719/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1874381] Re: LVM device unavailable after 18.04 to 20.04 upgrade Timed out waiting for device /dev/mapper/s5lp8--v g-home
** Tags added: id-5ec6a06d9ddd891b690ef2e4 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1874381 Title: LVM device unavailable after 18.04 to 20.04 upgrade Timed out waiting for device /dev/mapper/s5lp8--v g-home Status in Ubuntu on IBM z Systems: Confirmed Status in lvm2 package in Ubuntu: Confirmed Status in lvm2 source package in Focal: Confirmed Bug description: After upgrading an LPAR configured with LVM from 18.04 to 20.04 /home is no longer mounted. During boot the console shows Timed out waiting for device /dev/mapper/s5lp8--vg-home Please see the attached dist-upgrade logs and console output for more detail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1874381/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876600] Re: cookie overruns can cause org.freedesktop.systemd1 dbus to hang
Validated systemd 237-3ubuntu10.41 from bionic-proposed, according to test case from bug description: ubuntu@systemd-cookie-bionic:~$ dpkg -l systemd | grep systemd ii systemd237-3ubuntu10.41 amd64system and service manager ubuntu@systemd-cookie-bionic:~$ gcc -Wall test.c -o cookie -lsystemd -g ubuntu@systemd-cookie-bionic:~$ gdb --batch --command=test.gdb --args ./cookie Breakpoint 1 at 0xe61: file test.c, line 38. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". (15s) cookie: 0x0001reply-cookie: 0x0001 Breakpoint 1, print_unit_path (bus=0x55757290) at test.c:38 38 r = sd_bus_message_new_method_call(bus, , $1 = 0x1 $2 = 0xff00 (15s) cookie: 0x8000reply-cookie: 0x8000 (29s) cookie: 0x8001reply-cookie: 0x8001 (43s) cookie: 0x8002reply-cookie: 0x8002 ** Tags removed: verification-needed verification-needed-bionic ** Tags added: verification-done verification-done-bionic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1876600 Title: cookie overruns can cause org.freedesktop.systemd1 dbus to hang Status in systemd package in Ubuntu: Fix Released Status in systemd source package in Xenial: In Progress Status in systemd source package in Bionic: Fix Committed Bug description: [Impact] Long-running services overflow the sd_bus->cookie counter, causing further communication with org.freedesktop.systemd1 to stall. [Description] Systemd dbus messages include a "cookie" value to uniquely identify them in their bus context. This value is obtained from the bus header, and incremented for each exchanged message in the same bus object. For services that run for longer periods of time and keep communicating through dbus, it's possible to overflow the cookie value, causing further messages to the org.freedesktop.systemd1 dbus to fail. This can lead to these services becoming unresponsive, as they get stuck trying to communicate with invalid bus cookie values. This issue has been fixed upstream by the commit below: - sd-bus: deal with cookie overruns (1f82f5bb4237) $ git describe --contains 1f82f5bb4237 v242-rc1~228 $ rmadison systemd systemd | 229-4ubuntu4 | xenial | source, ... systemd | 229-4ubuntu21.27 | xenial-security | source, ... systemd | 229-4ubuntu21.27 | xenial-updates | source, ... systemd | 229-4ubuntu21.28 | xenial-proposed | source, ... systemd | 237-3ubuntu10| bionic | source, ... systemd | 237-3ubuntu10.38 | bionic-security | source, ... systemd | 237-3ubuntu10.39 | bionic-updates | source, ... systemd | 237-3ubuntu10.40 | bionic-proposed | source, ... < systemd | 242-7ubuntu3 | eoan| source, ... Releases starting with Eoan already have this fix. [Test Case] There doesn't seem to be an easy test case for this, as the cookie values start at zero and won't overflow until (1<<32). There have been reports from users hitting this on Kubernetes clusters continuously running for longer periods (~5 months). Using GDB, we can construct an artificial test case to test the cookie overflow. The test case below performs the following steps: 1. Create a new system bus object through sd_bus_default_system() 2. Allocate and append a new method_call message to the bus 3. Send the message through sd_bus_call() 4. Handle the response message and free up the message objects It's essentially the example code from the sd_bus_message_new_method_call() manpage, with minor modifications: this is done continuously, to keep incrementing the bus cookie value. We step in with GDB when it reaches 0x1, and set its value to 0xff00 which then causes the test program to fail shortly afterwards. An example test run of an impacted system: ubuntu@bionic:~$ gcc -Wall test.c -o cookie -lsystemd -g ubuntu@bionic:~$ gdb --batch --command=test.gdb --args ./cookie Breakpoint 1 at 0xe61: file test.c, line 38. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". (16s) cookie: 0x0001reply-cookie: 0x0001 Breakpoint 1, print_unit_path (bus=0x55757290) at test.c:38 38 r = sd_bus_message_new_method_call(bus, , $1 = 0x1 $2 = 0xff00 Call failed: Operation not supported Sleeping and retrying... Call failed: Invalid argument Assertion 'm->n_ref > 0' failed at ../src/libsystemd/sd-bus/bus-message.c:934, function sd_bus_message_unref(). Aborting. Program received signal SIGABRT, Aborted. __GI_raise (sig=sig@entry=0x6) at ../sysdeps/unix/sysv/linux/raise.c:51 51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory. To compile and debug the
[Touch-packages] [Bug 1878517] Re: please apply bash 5.0 patch 17
** Tags added: id-5ec6a2b21639eb7938a123eb -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1878517 Title: please apply bash 5.0 patch 17 Status in bash package in Ubuntu: Triaged Status in bash source package in Focal: Triaged Bug description: I am using Ubuntu 20.04 for development and has hit a bug in bash 5.0 patch 16. I can't reproduce it in pure bash, but with bats from https://github.com/bats-core/bats-core/ it is very easy to repro: ``` # cat << EOF > ya.bats check() { echo "check $@" ls -l /proc/self/fd } @test "here file" { check -p <(echo "hey") false } EOF $ bats ya.bats ``` Normally the output should contain the line lr-x-- 1 kir kir 64 May 14 02:01 63 -> pipe:[4616918] which is a result of a "here file" created by bash via <(echo "hey"). In my testing, about 50% of runs don't have /dev/fd/63 listed. I found out this is a manifest of a bug introduced in bash 5.0 patch 16 (see http://ftp.gnu.org/gnu/bash/bash-5.0-patches/bash50-016) The bug is fixed in 5.0 patch 17 (see http://ftp.gnu.org/gnu/bash/bash-5.0-patches/bash50-017). Please update bash to patchlevel 17. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1878517/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1774843] Re: apport python exception for python versions which python-apt is not built on
Łukasz's remark on focal: +1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1774843 Title: apport python exception for python versions which python-apt is not built on Status in Apport: New Status in apport package in Ubuntu: Fix Released Status in python3.7 package in Ubuntu: Invalid Status in python3.8 package in Ubuntu: Invalid Status in apport source package in Bionic: Fix Committed Status in python3.7 source package in Bionic: Won't Fix Status in python3.8 source package in Bionic: Won't Fix Status in apport source package in Eoan: Fix Committed Status in python3.7 source package in Eoan: Won't Fix Status in python3.8 source package in Eoan: Won't Fix Status in apport source package in Focal: Invalid Status in python3.7 source package in Focal: Invalid Status in python3.8 source package in Focal: Invalid Bug description: [Impact] apport's python crash handler runs for every installed version of python e.g. on Ubuntu 18.04 LTS it will run for crashes with python3.6 or python3.7 as an interpreter. However, python apt modules are only available for the the supported version of python so the crash handler generates an exception which is annoying. [Test Case] 1) Install the non-default version of python3 e.g. python3.7 on Ubuntu 18.04 LTS. 2) Run 'python3.7 -c 'print hello' and observe a Traceback re apt_pkg not being found. With the version of python3-apport from -proposed you'll not receive the Traceback from step # 2. [Regression Potential] Its possible the crash handler change is incorrect so it should be confirmed that we still get python crashes about the system version of python. One way to do this is to run 'apport-cli coreutils < /dev/null'. [NOTE] It isn't necessary to fix this in Ubuntu 20.04 LTS, as there is only python3.8 available, so I haven't. [Original Description] it seems apport installs an exception hook whenever running python3. This hook is apparently installed for python3.7 too. This exception handler has a dependency on apt_pkg, which is a binary that is not compatible with python3.7 it seems (you can't import it, see below) As a result, whenever I run a python3.7 script and run into an exception (which happens often when writing code), I get an additional exception in the exception handler + a copy of the original exception, so three stacktraces in total. A solution would be to only install the exception hook for the system python i.e. python3.6 $ lsb_release -rd Description: Ubuntu 18.04 LTS Release: 18.04 apport: 2.20.9-0ubuntu7 python-apt: 1.6.0 python3.7: 3.7.0~b3-1 Demo with a trivial error: $ python3 -c 'print hello' File "", line 1 print hello ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(hello)? $ python3.7 -c 'print hello' File "", line 1 print hello ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(hello)? Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 63, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python3/dist-packages/apport/__init__.py", line 5, in from apport.report import Report File "/usr/lib/python3/dist-packages/apport/report.py", line 30, in import apport.fileutils File "/usr/lib/python3/dist-packages/apport/fileutils.py", line 23, in from apport.packaging_impl import impl as packaging File "/usr/lib/python3/dist-packages/apport/packaging_impl.py", line 24, in import apt File "/usr/lib/python3/dist-packages/apt/__init__.py", line 23, in import apt_pkg ModuleNotFoundError: No module named 'apt_pkg' Original exception was: File "", line 1 print hello ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(hello)? Python 3.6.5 (default, Apr 1 2018, 05:46:30) [GCC 7.3.0] on linux Type "help", "copyright", "credits" or "license" for more information. >>> import sys >>> sys.excepthook >>> import apt_pkg >>> apt_pkg.__file__ '/usr/lib/python3/dist-packages/apt_pkg.cpython-36m-x86_64-linux-gnu.so' >>> Python 3.7.0b3 (default, Mar 30 2018, 04:35:22) [GCC 7.3.0] on linux Type "help", "copyright", "credits" or "license" for more information. >>> import sys >>> sys.excepthook >> import apt_pkg Traceback (most recent call last): File "", line 1, in ModuleNotFoundError: No module named 'apt_pkg' To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1774843/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe :
[Touch-packages] [Bug 1879751] Re: ALSA sees my intel soundcards but pulseaudio does not. Error is : "Failed to open module /usr/lib/pulse-13.99.1/modules/module-alsa-card.so: /usr/lib/pulse-13.99.1/m
Thank you, but didn't help. "debuild" and plain old make failed: ... CCLD alsa-mixer-path-test /usr/bin/ld: ./.libs/libalsa-util.so: undefined reference to `snd_use_case_parse_ctl_elem_id' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:6955: alsa-mixer-path-test] Error 1 make[3]: Leaving directory '/root/DEV/pulseaudio-13.99.1/src' make[2]: *** [Makefile:5401: all] Error 2 make[2]: Leaving directory '/root/DEV/pulseaudio-13.99.1/src' make[1]: *** [Makefile:833: all-recursive] Error 1 make[1]: Leaving directory '/root/DEV/pulseaudio-13.99.1' make: *** [Makefile:648: all] Error 2 # ~/DEV/pulseaudio-13.99.1# dpkg -l | grep libasound ii libasound2:amd64 1.2.2-2.1 amd64shared library for ALSA applications ii libasound2:i3861.2.2-2.1 i386 shared library for ALSA applications ii libasound2-data1.2.2-2.1 all Configuration files and profiles for ALSA drivers ii libasound2-dev:amd64 1.2.2-2.1 amd64shared library for ALSA applications -- development files ii libasound2-plugins:amd64 1.2.2-1ubuntu1 amd64ALSA library additional plugins rc libasound2-plugins:i3861.2.2-1ubuntu1 i386 ALSA library additional plugins -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1879751 Title: ALSA sees my intel soundcards but pulseaudio does not. Error is : "Failed to open module /usr/lib/pulse-13.99.1/modules/module-alsa- card.so: /usr/lib/pulse-13.99.1/modules/libalsa-util.so: undefined symbol: snd_use_case_parse_ctl_elem_id, version ALSA_0.9" Status in pulseaudio package in Ubuntu: Incomplete Bug description: ALSA sees my intel soundcards but pulseaudio does not. 'pavucontrol' sees only a "Dummy" device. #journalctl|grep pulse' gives "pulseaudio[18489]: Failed to open module /usr/lib/pulse-13.99.1/modules/module-alsa-card.so: /usr/lib/pulse-13.99.1/modules/libalsa-util.so: undefined symbol: snd_use_case_parse_ctl_elem_id, version ALSA_0.9" Making pulseaudio from source fixes the problem/ (Linux CF-C2CQAZXCM 5.4.0-29-generic #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux 20.04) ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.2 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D8p', '/dev/snd/pcmC1D7p', '/dev/snd/pcmC1D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: GNOME-Flashback:GNOME Date: Wed May 20 12:48:07 2020 InstallationDate: Installed on 2015-04-29 (1848 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/tcsh SourcePackage: pulseaudio UpgradeStatus: Upgraded to focal on 2020-05-05 (15 days ago) dmi.bios.date: 09/12/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V2.00L21 dmi.board.asset.tag: No Asset Tag dmi.board.name: CFC2-2 dmi.board.vendor: Panasonic Corporation dmi.board.version: 1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Panasonic Corporation dmi.chassis.version: 001 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV2.00L21:bd09/12/2018:svnPanasonicCorporation:pnCF-C2CQAZXCM:pvr002:rvnPanasonicCorporation:rnCFC2-2:rvr1:cvnPanasonicCorporation:ct10:cvr001: dmi.product.family: CFC2-2 dmi.product.name: CF-C2CQAZXCM dmi.product.sku: CF-C2CQAZXCM dmi.product.version: 002 dmi.sys.vendor: Panasonic Corporation mtime.conffile..etc.init.d.apport: 2020-02-26T22:18:45 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1879751/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1774843] Re: apport python exception for python versions which python-apt is not built on
Verified on Ubuntu 19.10 on 19.10 python3-apt is built for pyton3.7, the system python for 19.10 so i tested against python3.8 from universe. bart@DH170:~$ apt-cache policy python3-apport python3-apport: Geïnstalleerd: 2.20.11-0ubuntu8.9 Kandidaat: 2.20.11-0ubuntu8.9 Versietabel: *** 2.20.11-0ubuntu8.9 400 400 http://nl.archive.ubuntu.com/ubuntu eoan-proposed/main amd64 Packages 400 http://nl.archive.ubuntu.com/ubuntu eoan-proposed/main i386 Packages 100 /var/lib/dpkg/status 2.20.11-0ubuntu8.8 500 500 http://nl.archive.ubuntu.com/ubuntu eoan-updates/main amd64 Packages 500 http://nl.archive.ubuntu.com/ubuntu eoan-updates/main i386 Packages 500 http://nl.archive.ubuntu.com/ubuntu eoan-security/main amd64 Packages 500 http://nl.archive.ubuntu.com/ubuntu eoan-security/main i386 Packages 2.20.11-0ubuntu8 500 500 http://nl.archive.ubuntu.com/ubuntu eoan/main amd64 Packages 500 http://nl.archive.ubuntu.com/ubuntu eoan/main i386 Packages bart@DH170:~$ python3.7 -c 'import apt_pkg' bart@DH170:~$ python3.8 -c 'import apt_pkg' Traceback (most recent call last): File "", line 1, in ModuleNotFoundError: No module named 'apt_pkg' bart@DH170:~$ python3.8 -c 'print hello' File "", line 1 print hello ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(hello)? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1774843 Title: apport python exception for python versions which python-apt is not built on Status in Apport: New Status in apport package in Ubuntu: Fix Released Status in python3.7 package in Ubuntu: Invalid Status in python3.8 package in Ubuntu: Invalid Status in apport source package in Bionic: Fix Committed Status in python3.7 source package in Bionic: Won't Fix Status in python3.8 source package in Bionic: Won't Fix Status in apport source package in Eoan: Fix Committed Status in python3.7 source package in Eoan: Won't Fix Status in python3.8 source package in Eoan: Won't Fix Status in apport source package in Focal: Invalid Status in python3.7 source package in Focal: Invalid Status in python3.8 source package in Focal: Invalid Bug description: [Impact] apport's python crash handler runs for every installed version of python e.g. on Ubuntu 18.04 LTS it will run for crashes with python3.6 or python3.7 as an interpreter. However, python apt modules are only available for the the supported version of python so the crash handler generates an exception which is annoying. [Test Case] 1) Install the non-default version of python3 e.g. python3.7 on Ubuntu 18.04 LTS. 2) Run 'python3.7 -c 'print hello' and observe a Traceback re apt_pkg not being found. With the version of python3-apport from -proposed you'll not receive the Traceback from step # 2. [Regression Potential] Its possible the crash handler change is incorrect so it should be confirmed that we still get python crashes about the system version of python. One way to do this is to run 'apport-cli coreutils < /dev/null'. [NOTE] It isn't necessary to fix this in Ubuntu 20.04 LTS, as there is only python3.8 available, so I haven't. [Original Description] it seems apport installs an exception hook whenever running python3. This hook is apparently installed for python3.7 too. This exception handler has a dependency on apt_pkg, which is a binary that is not compatible with python3.7 it seems (you can't import it, see below) As a result, whenever I run a python3.7 script and run into an exception (which happens often when writing code), I get an additional exception in the exception handler + a copy of the original exception, so three stacktraces in total. A solution would be to only install the exception hook for the system python i.e. python3.6 $ lsb_release -rd Description: Ubuntu 18.04 LTS Release: 18.04 apport: 2.20.9-0ubuntu7 python-apt: 1.6.0 python3.7: 3.7.0~b3-1 Demo with a trivial error: $ python3 -c 'print hello' File "", line 1 print hello ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(hello)? $ python3.7 -c 'print hello' File "", line 1 print hello ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(hello)? Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 63, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python3/dist-packages/apport/__init__.py", line 5, in from apport.report import Report File "/usr/lib/python3/dist-packages/apport/report.py", line 30, in import apport.fileutils File
[Touch-packages] [Bug 1872564] Re: /proc/sys/kernel/random/boot_id rule missing from abstractions/nameservice
Hello Simon, or anyone else affected, Accepted apparmor into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/apparmor/2.13.3-7ubuntu5.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: apparmor (Ubuntu Focal) Status: In Progress => Fix Committed ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1872564 Title: /proc/sys/kernel/random/boot_id rule missing from abstractions/nameservice Status in apparmor package in Ubuntu: Fix Released Status in apparmor source package in Focal: Fix Committed Bug description: [Impact] On a default Focal install, systemd is used when looking up passwd and group information: # grep systemd /etc/nsswitch.conf passwd: files systemd group: files systemd Daemons confined by Apparmor that also query those "databases" will cause this Apparmor denial: audit: type=1400 audit(1586825456.411:247): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=7370 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 Many daemons confined by Apparmor also happen to downgrade their privileges so they always end up looking up user/group information. To fix this problem, we had to backport an upstream patch which adds new directives to the 'nameservices' apparmor profile. [Test Case] In order to reproduce the bug, one can: 1) launch a Focal container (named fb1 here) $ lxc launch images:ubuntu/focal fb1 2) setup apparmor inside the container (already done on official Ubuntu images) $ lxc exec fb1 -- apt update && lxc exec fb1 -- apt install apparmor -y 3) install bind9 $ lxc exec fb1 -- apt install bind9 -y 4) check kernel logs for DENIED $ journalctl -o cat -b0 -k | grep 'apparmor="DENIED"' | grep -F 'profile="/usr/sbin/named"' or, depending on how logging is configured: $ dmesg | grep 'apparmor="DENIED"' | grep -F 'profile="/usr/sbin/named"' Step 4, should not return anything. Because systemd is involved in the user/group lookups, it currently returns the following: audit: type=1400 audit(1586826072.115:266): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:267): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:268): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:269): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 audit: type=1400 audit(1586826072.115:270): apparmor="DENIED" operation="open" namespace="root//lxd-fb1_" profile="/usr/sbin/named" name="/proc/sys/kernel/random/boot_id" pid=13756 comm="named" requested_mask="r" denied_mask="r" fsuid=100 ouid=100 [Regression Potential] In order to fix this issue, 3 separate patches had to be backported. They are simple and self-contained, especially two of them, whose purposes are to add the definition of the @{run} variable and then to add a trailing slash at the end of the "/run"
[Touch-packages] [Bug 1879702] Re: The software properties screen freezes when I update the software cache
I saved the output of 'journalctl -b 0' to a file. It's in the attachments. ** Attachment added: "journalctl.log" https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1879702/+attachment/5375608/+files/journalctl.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1879702 Title: The software properties screen freezes when I update the software cache Status in software-properties package in Ubuntu: Incomplete Bug description: I am currently using Ubuntu 20.04, but I had the same problem in 19.10. When I make changes to the software resources, when closing the program, "Update the software cache?" I come across the question. If I say yes, it updates the cache but the window freezes. It cannot be closed in any way. 'lsb_release -rd': Description: Ubuntu 20.04 LTS Release: 20.04 'apt-cache policy software-properties': software-properties: Installed: (none) Candidate: (none) Release schedule: ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: software-properties-gtk 0.98.9 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 20 16:08:11 2020 ExecutablePath: /usr/bin/software-properties-gtk InstallationDate: Installed on 2017-06-10 (1075 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) InterpreterPath: /usr/bin/python3.8 PackageArchitecture: all Python3Details: /usr/local/bin/python3.7, Python 3.7.2, unpackaged PythonDetails: /usr/bin/python2.7, Python 2.7.18rc1, python-is-python2, 2.7.17-4 SourcePackage: software-properties UpgradeStatus: Upgraded to focal on 2020-05-11 (8 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1879702/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876065] Re: After unplug headphones and plug them again no sound can be heard
I am an affected soul. See bug 1876238 and bug 1878327 which were marked as duplicate. I had earlier tested the patch from Kai-Heng Feng's (kaihengfeng) PPA, and it was working fine. I had enabled to receive Pre-released updates. I downloaded the proposed update (1:13.99.1-1ubuntu3.3), applied it, and tested the update. The internal speakers, both the headphone jacks and the internal mic, all are working fine now. Unplugged the headphones and plugged them again and again. Sound can be heard. Sound is getting automatically redirected to the headphones when connected to jack interfaces and back to the internal speakers when headphones are unplugged. Tested/tried multiple times and is working fine every time. Thank you. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1876065 Title: After unplug headphones and plug them again no sound can be heard Status in pulseaudio package in Ubuntu: Fix Committed Status in pulseaudio source package in Focal: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: * Impact Sound isn't automatically redirected to headphones when those are connected to a jack interface * Test case Disconnect the headsets Start your webbrowser/music player/video player and play some sound Connect the headsets to the jack interface -> the sound should be directly redirected to the plugged headsets * Regression potential Check that audio routing when connecting/disconnecting devices to the hack entry is working correctly After startup with headset plugged in they play sound nicely - no issue. When they are unplugged, the sound is switched to the speaker (laptop) - all good. However, when I plug the headset back there is no sound. I see the app on pavucontrol, the volume is fine - everything looks fine except there is no sound. I dumped output of "pactl list" command on startup (headset plugged), after unplugging the headset, and when it is plugged back. From the comparison of these outputs, it looks like the source has got muted after the headset is plugged. Source #1 State: RUNNING Name: alsa_input.pci-_00_1f.3.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: yes Attached three outputs: headset-in.txt - after startup with headset plugged - all fine. headset-out.txt - after unplugged headset - sound through the speaker - all fine. headset-back.txt - after plugged headset back - no sound. Any help greatly appreciated. Regards, Roman To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1876065/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1870359] Re: My machine as Wi-Fi Hotspot broken after upgrade to 20.04
Hello Krister, or anyone else affected, Accepted network-manager into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/network- manager/1.22.10-1ubuntu2.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: network-manager (Ubuntu Focal) Status: New => Fix Committed ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1870359 Title: My machine as Wi-Fi Hotspot broken after upgrade to 20.04 Status in network-manager package in Ubuntu: Fix Committed Status in network-manager source package in Focal: Fix Committed Bug description: * Impact The hotspot feature fails to forward the data to the clients * Test case - log into an Ubuntu or GNOME session - connect the machine to an eth cable for internet - go to gnome-control-center -> wifi - enable the hotspot from the menu in the headerbar - connect another device to the wifi created -> the client should connect and access to internet work correctly * Regression potential the change is only updating the iptables binary location, there shouldn't be any code impact out of having the command working on systems without usrmerge when it was not before - I have a machine with a wired network connection and a wifi card. I've been using the machine as a wireless router and server in my house. I've attached a screenshot of the Wi-Fi network settings. It looks as expected. Upon updating to 20.04, none of my machines can use the connection. The linux machine will not connect. The windows machine will connect but will not have internet. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: network-manager 1.22.10-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Uname: Linux 5.4.0-21-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu22 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Apr 2 15:47:02 2020 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-09-30 (1645 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) IpRoute: default via 192.168.0.1 dev eth0 proto static metric 100 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.100 metric 100 SourcePackage: network-manager UpgradeStatus: Upgraded to focal on 2020-04-02 (0 days ago) WifiSyslog: mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-01-13T14:45:42.987041 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.22.10 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1870359/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1509717] Re: Wily LVM-RAID1 – md: personality for level 1 is not loaded
That's certainly incorrect, lvm2 was fixed in focal (and hence groovy). That only leaves xenial, but updating xenial close to its EOL for something as unusual as this seems unneccessary. The supported configuration for raid1 is mdadm after all, not removing mdadm and the meta packages that depend on it and using lvm's raid support. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1509717 Title: Wily LVM-RAID1 – md: personality for level 1 is not loaded Status in linux package in Ubuntu: Invalid Status in lvm2 package in Ubuntu: Fix Released Status in linux source package in Bionic: Invalid Status in lvm2 source package in Bionic: Fix Released Status in linux source package in Cosmic: Invalid Status in lvm2 source package in Cosmic: Won't Fix Status in linux source package in Disco: Invalid Status in lvm2 source package in Disco: Won't Fix Status in linux source package in Eoan: Invalid Status in lvm2 source package in Eoan: Fix Released Status in lvm2 package in Debian: Incomplete Bug description: [Impact] system does not boot after converting lvm volume to raid1 w/o having mdadm installed. [Test case] 1. Install server with subiquity to LVM 2. Add second disk to it 3. Run pvcreate /dev/vdb 4. Run vgextend ubuntu-vg /dev/vdb 5. Run lvconvert -m1 --type raid1 ubuntu-vg/lv Reboot and check that it still boots. 6. Remove mdadm 7. Upgrade to lvm2 from proposed Reboot and check that it still boots. 8. Downgrade lvm2 to release Reboot and check that it fails to boot [Regression potential] Not really anything, we just add the raid1 module to initramfs, so it might be loaded during boot, and raid1 logical volumes might appear earlier. [Original bug report] After upgrading to Wily, raid1 LVs don't activate during the initrd phase. Since the root LV is also RAID1-mirrored, the system doesn't boot. I get the following message each time LVM tries to activate a raid1 LV: md: personality for level 1 is not loaded! Everything was fine with Vivid. I had to downgrade to Vivid kernel (3.19.0-30) to get my system to a usable state. I pretty much hope it to be a temporary workaround and I'll get the new 4.2.0 kernel work with Wily in days. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1509717/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880126] [NEW] After resume from suspend the desktop image is broken
Public bug reported: Wheb you resume from suspend Ubuntu 20.04 and unlock your session, the desktop image is corrupted as shown on screenshot. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia wl .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] je adresářem: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 340.108 Wed Dec 11 11:06:58 PST 2019 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2) .proc.driver.nvidia.warnings.fbdev: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Operace zamítnuta: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri May 22 11:43:37 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: bcmwl, 6.30.223.271+bdcom, 5.4.0-29-generic, x86_64: installed bcmwl, 6.30.223.271+bdcom, 5.4.0-31-generic, x86_64: installed nvidia-340, 340.108, 5.4.0-29-generic, x86_64: installed nvidia-340, 340.108, 5.4.0-31-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation G98M [GeForce 9200M GS] [10de:06e8] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company G98M [GeForce 9200M GS] [103c:3629] InstallationDate: Installed on 2020-04-27 (24 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=cs_CZ.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=2bd6e5fb-c1e4-4103-902e-36c3fd5ea356 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/10/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.25 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3629 dmi.board.vendor: Quanta dmi.board.version: 18.3E dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.25:bd07/10/2009:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvrRev1:rvnQuanta:rn3629:rvr18.3E:cvnQuanta:ct10:cvrN/A: dmi.product.family: 103C_5335KV dmi.product.name: HP Pavilion dv6 Notebook PC dmi.product.sku: NG735EA#ABZ dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug corruption focal ubuntu ** Attachment added: "Snímek obrazovky pořízený 2020-05-22 11-45-16.png" https://bugs.launchpad.net/bugs/1880126/+attachment/5375575/+files/Sn%C3%ADmek%20obrazovky%20po%C5%99%C3%ADzen%C3%BD%202020-05-22%2011-45-16.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1880126 Title: After resume from suspend the desktop image is broken Status in xorg package in Ubuntu: New Bug description: Wheb you resume from suspend Ubuntu 20.04 and unlock your session, the desktop image is corrupted as shown on screenshot. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia wl .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] je adresářem: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 340.108 Wed Dec 11 11:06:58 PST 2019 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2) .proc.driver.nvidia.warnings.fbdev: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics
[Touch-packages] [Bug 1869819] Re: [SRU] System can't detect external headset in the codec of Conexant
Hello hugh, or anyone else affected, Accepted pulseaudio into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/pulseaudio/1:11.1-1ubuntu7.8 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-bionic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: pulseaudio (Ubuntu Bionic) Status: In Progress => Fix Committed ** Tags removed: verification-failed-bionic ** Tags added: verification-needed verification-needed-bionic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1869819 Title: [SRU] System can't detect external headset in the codec of Conexant Status in OEM Priority Project: Confirmed Status in OEM Priority Project bionic series: New Status in pulseaudio package in Ubuntu: Fix Released Status in pulseaudio source package in Bionic: Fix Committed Status in pulseaudio source package in Focal: Fix Released Bug description: [Impact] In some hp's devices, there are two audio jacks(one headset and one headphone) in the audio interface which is using the codec of Conexant, and apparently it's not working, the system can't detect the headset in current codec. [Test Case] 1. Insert 4 rings(3 stripes) headset into front audio port (headset icon) 2. Check System Setting->Sound->Output [Expected result] Can detect external headset [Actual result] Only shows internal speaker. External headset microphone was detected. Another front audio port (earphone icon) works fine. [Regression Potential] Low. [Failure rate] 100% [Additional information] system-product-name: HP EliteDesk 800 G5 SFF CPU: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz (8x) GPU: 00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3e98] (rev 02) OS-version: 18.04 kernel-version: 4.15.0-1065-oem pulseaudio-version: 1:11.1-1ubuntu7.2 Upstream issue: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/272 Ubuntu-Focal-Source: https://code.launchpad.net/~hugh712/ubuntu/+source/pulseaudio/+git/pulseaudio/+ref/focal-1869819 PPA: https://launchpad.net/~hugh712/+archive/ubuntu/sru-1869819 To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1869819/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876065] Re: After unplug headphones and plug them again no sound can be heard
Hello Roman, or anyone else affected, Accepted pulseaudio into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/pulseaudio/1:13.99.1-1ubuntu3.3 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: pulseaudio (Ubuntu Focal) Status: In Progress => Fix Committed ** Tags removed: verification-failed verification-failed-focal ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1876065 Title: After unplug headphones and plug them again no sound can be heard Status in pulseaudio package in Ubuntu: Fix Committed Status in pulseaudio source package in Focal: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: * Impact Sound isn't automatically redirected to headphones when those are connected to a jack interface * Test case Disconnect the headsets Start your webbrowser/music player/video player and play some sound Connect the headsets to the jack interface -> the sound should be directly redirected to the plugged headsets * Regression potential Check that audio routing when connecting/disconnecting devices to the hack entry is working correctly After startup with headset plugged in they play sound nicely - no issue. When they are unplugged, the sound is switched to the speaker (laptop) - all good. However, when I plug the headset back there is no sound. I see the app on pavucontrol, the volume is fine - everything looks fine except there is no sound. I dumped output of "pactl list" command on startup (headset plugged), after unplugging the headset, and when it is plugged back. From the comparison of these outputs, it looks like the source has got muted after the headset is plugged. Source #1 State: RUNNING Name: alsa_input.pci-_00_1f.3.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: yes Attached three outputs: headset-in.txt - after startup with headset plugged - all fine. headset-out.txt - after unplugged headset - sound through the speaker - all fine. headset-back.txt - after plugged headset back - no sound. Any help greatly appreciated. Regards, Roman To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1876065/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1879211] Re: Charging my cellphone through usb breaks internet connection.
** Changed in: network-manager (Ubuntu) Importance: Undecided => Low ** Changed in: network-manager (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1879211 Title: Charging my cellphone through usb breaks internet connection. Status in network-manager package in Ubuntu: Incomplete Bug description: I don't know what package is responsible for this. I entered iptables because the ip command was not recognized as a package. I use the ip route to debug internet problems. Here it is before plugging my cellphone through usb: #ip route default via 192.168.0.1 dev wlp2s0 proto dhcp metric 600 25.0.0.0/8 dev ham0 proto kernel scope link src 25.69.248.65 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.0.0/24 dev wlp2s0 proto kernel scope link src 192.168.0.51 metric 600 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown Here it is after I plug my cellphone #ip route default via 192.168.42.129 dev enp0s20f0u1 proto dhcp metric 100 default via 192.168.0.1 dev wlp2s0 proto dhcp metric 600 25.0.0.0/8 dev ham0 proto kernel scope link src 25.69.248.65 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.0.0/24 dev wlp2s0 proto kernel scope link src 192.168.0.51 metric 600 192.168.42.0/24 dev enp0s20f0u1 proto kernel scope link src 192.168.42.114 metric 100 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown So my computer is trying to access all ips using my cellphone as a router, which of course fails. the command "sudo ip route del default" followed by "sudo ip route add default via 192.168.0.1 dev wlp2s0" restores my connection. Thank you for your attention. I'm available to answer any questions and fix this bug. Reporting this bug was already effort diverted from my other tasks, so let's make this count no matter how deep it cuts. P.S: I went ahead and marked this bug as a security vulnerability because I can think of ways this can be exploited, especially if the cellphone can trigger the bug and route traffic so that the user doesn't suspect it. If you feel the security impact is small and that there are other more important security issues, feel free to unmark it and we can deal with it's usability impact, which is probably more impactful. Regards, Tomás. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: iptables 1.6.1-2ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-99.100-generic 4.15.18 Uname: Linux 4.15.0-99-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.14 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun May 17 22:59:02 2020 InstallationDate: Installed on 2019-02-08 (464 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) SourcePackage: iptables UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1879211/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1876046] Re: [XPS L501X, Realtek ALC665, Speaker, Internal] "Analog Stereo" and "Build-in speaker" appears "unplugged/unavailable"
*** This bug is a duplicate of bug 1876065 *** https://bugs.launchpad.net/bugs/1876065 For me, upgrading from groovy helped Add and uncomment lines to sources.list #deb http://pl.archive.ubuntu.com/ubuntu/ groovy main restricted universe multiverse #deb http://pl.archive.ubuntu.com/ubuntu/ groovy-backports main restricted universe multiverse #deb http://pl.archive.ubuntu.com/ubuntu/ groovy-security main restricted universe multiverse #deb http://pl.archive.ubuntu.com/ubuntu/ groovy-updates main restricted universe multiverse #deb http://pl.archive.ubuntu.com/ubuntu/ groovy-proposed main restricted universe multiverse apt update apt install libpulse0/groovy-proposed apt install pulseaudio/groovy-proposed ! comment out those lines in sources.list again ! run apt update again ! do not upgrade your ubuntu when groovy repositories are turned on -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1876046 Title: [XPS L501X, Realtek ALC665, Speaker, Internal] "Analog Stereo" and "Build-in speaker" appears "unplugged/unavailable" Status in pulseaudio package in Ubuntu: Incomplete Bug description: After upgrading from 19.04 to 20.04 sound did not work. "Analog Stereo" and "Build-in speaker" appears "unplugged/unavaiable". I can change it in volume control -> configuration to Analog Stereo Duplex (unplugged)(unavaiable) and sound does play, but after each reboot computer changes to Digital Stereo IEC985 and do not play sound until changed again. I did reinstall of alsa and pulse according to some forums but this didn't work. Before upgrade everything always worked out of the box since 2009 on this computer. I know it's a little old but it works excellent! Please help. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-28.32-generic 5.4.30 Uname: Linux 5.4.0-28-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: kwiatek1472 F pulseaudio /dev/snd/controlC0: kwiatek1472 F pulseaudio /dev/snd/pcmC0D0c: kwiatek1472 F...m pulseaudio /dev/snd/pcmC0D0p: kwiatek1472 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Thu Apr 30 09:25:27 2020 InstallationDate: Installed on 2020-02-25 (64 days ago) InstallationMedia: Xubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:MID successful Symptom_Card: Built-in Audio - HDA Intel MID Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: kwiatek1472 F pulseaudio /dev/snd/controlC0: kwiatek1472 F pulseaudio /dev/snd/pcmC0D0c: kwiatek1472 F...m pulseaudio /dev/snd/pcmC0D0p: kwiatek1472 F...m pulseaudio Symptom_Jack: Speaker, Internal Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [XPS L501X, Realtek ALC665, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to focal on 2020-04-25 (4 days ago) dmi.bios.date: 07/26/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.vendor: Dell Inc. dmi.board.version: A08 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A08 dmi.modalias: dmi:bvnDellInc.:bvrA08:bd07/26/2011:svnDellInc.:pnXPSL501X:pvrA08:rvnDellInc.:rn:rvrA08:cvnDellInc.:ct8:cvrA08: dmi.product.name: XPS L501X dmi.product.version: A08 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1876046/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880095] Re: Keyboard entry stopped working
When the problem happens can you still operate anything with the mouse? ** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu) ** Also affects: compiz (Ubuntu) Importance: Undecided Status: New ** Changed in: compiz (Ubuntu) Status: New => Incomplete ** Changed in: xorg-server (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1880095 Title: Keyboard entry stopped working Status in compiz package in Ubuntu: Incomplete Status in xorg-server package in Ubuntu: Incomplete Bug description: I was toggling between text entry languages when the keyboard entry suddenly stopped working. Even the onscreen keyboard was not able to entry any keys. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xserver-xorg-input-all (not installed) ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..07.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:07:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2) .tmp.unity_support_test.0: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: CasperMD5CheckResult: skip CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7:ubuntu Date: Fri May 22 09:18:07 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia, 435.21, 5.4.0-31-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1080] [10de:1b80] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1080] [1462:3362] InstallationDate: Installed on 2012-03-23 (2981 days ago) InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: Gigabyte Technology Co., Ltd. X570 AORUS ELITE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=20aa0109-67bb-46a0-95c6-626f0f0487eb ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/06/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F11 dmi.board.asset.tag: Default string dmi.board.name: X570 AORUS ELITE dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF11:bd12/06/2019:svnGigabyteTechnologyCo.,Ltd.:pnX570AORUSELITE:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570AORUSELITE:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: X570 AORUS ELITE dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.14.1+20.04.20200211-0ubuntu1 version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 20.0.4-2ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 xserver.bootTime: Fri May 22 09:13:46 2020 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.20.8-2ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1880095/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1880095] [NEW] Keyboard entry stopped working
Public bug reported: I was toggling between text entry languages when the keyboard entry suddenly stopped working. Even the onscreen keyboard was not able to entry any keys. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xserver-xorg-input-all (not installed) ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..07.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:07:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2) .tmp.unity_support_test.0: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: CasperMD5CheckResult: skip CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7:ubuntu Date: Fri May 22 09:18:07 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia, 435.21, 5.4.0-31-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1080] [10de:1b80] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1080] [1462:3362] InstallationDate: Installed on 2012-03-23 (2981 days ago) InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: Gigabyte Technology Co., Ltd. X570 AORUS ELITE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-31-generic root=UUID=20aa0109-67bb-46a0-95c6-626f0f0487eb ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/06/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F11 dmi.board.asset.tag: Default string dmi.board.name: X570 AORUS ELITE dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF11:bd12/06/2019:svnGigabyteTechnologyCo.,Ltd.:pnX570AORUSELITE:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570AORUSELITE:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: X570 AORUS ELITE dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.14.1+20.04.20200211-0ubuntu1 version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 20.0.4-2ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 xserver.bootTime: Fri May 22 09:13:46 2020 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.20.8-2ubuntu2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 focal possible-manual-nvidia-install ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1880095 Title: Keyboard entry stopped working Status in xorg package in Ubuntu: New Bug description: I was toggling between text entry languages when the keyboard entry suddenly stopped working. Even the onscreen keyboard was not able to entry any keys. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xserver-xorg-input-all (not installed) ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34 Uname: Linux 5.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..07.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:07:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 GCC version: gcc version 9.3.0 (Ubuntu
[Touch-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected
Fresh install of Ubuntu 20.04 with a TT BH060 (TaoTronics): Device E8:AB:FA:*:*:* (public) Name: TAOTRONICS SoundSurge 60 Alias: TAOTRONICS SoundSurge 60 Class: 0x00240418 Icon: audio-card Paired: yes Trusted: yes Blocked: no Connected: yes LegacyPairing: no UUID: Headset (1108--1000-8000-00805f9b34fb) UUID: Audio Sink(110b--1000-8000-00805f9b34fb) UUID: A/V Remote Control Target (110c--1000-8000-00805f9b34fb) UUID: Advanced Audio Distribu.. (110d--1000-8000-00805f9b34fb) UUID: A/V Remote Control(110e--1000-8000-00805f9b34fb) UUID: Handsfree (111e--1000-8000-00805f9b34fb) UUID: PnP Information (1200--1000-8000-00805f9b34fb) Modalias: bluetooth:v000Apd Also, kernel messages (hundreds): [149342.549626] Bluetooth: hci0: SCO packet for unknown connection handle 0 [149342.549628] Bluetooth: hci0: SCO packet for unknown connection handle 12289 Switching to HSP/HFP just deactivates it completely. Only A2DP works as expected. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1576559 Title: Refused to switch profile to headset_head_unit: Not connected Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm trying to connect a bluetooth-speaker-with-microphone (Mi Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't use it as a headset with microphone. The device doesn't list in the "Input Devices" by default, and using the sound settings to change the profile of the device to HSP/HFP results in this log message: W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to headset_head_unit: Not connected I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10. pulseaudio: Installed: 1:8.0-0ubuntu3 bluez: Installed: 5.37-0ubuntu5 To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1576559/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp