[Touch-packages] [Bug 2062667] Re: Fails on (and should be removed from) raspi desktop
** Also affects: ubuntu-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/2062667 Title: Fails on (and should be removed from) raspi desktop Status in protection-domain-mapper package in Ubuntu: Confirmed Status in qrtr package in Ubuntu: Confirmed Status in ubuntu-meta package in Ubuntu: Confirmed Bug description: The protection-domain-mapper package (and qrtr-tools) are both installed by default on the Ubuntu Desktop for Raspberry Pi images, thanks to their inclusion in the desktop-minimal seed for arm64. However, there's no hardware that they target on these platforms, and the result is a permanently failed service (pd-mapper.service). It appears these were added to support the X13s laptop [1]. I've attempted to work around the issue by excluding these packages in the desktop-raspi seed (experimentally in my no-pd-mapper branch [2]) but this does not work (the packages still appear in the built images). Ideally, these packages should be moved into a hardware-specific seed for the X13s (and/or whatever other laptops need these things). Alternatively, at a bare minimum, the package should have some conditional that causes the service not to attempt to start when it's not on Qualcomm hardware. [1]: https://git.launchpad.net/~ubuntu-core-dev/ubuntu- seeds/+git/ubuntu/commit/desktop- minimal?id=afe820cd49514896e96d02303298ed873d8d7f8a [2]: https://git.launchpad.net/~waveform/ubuntu- seeds/+git/ubuntu/commit/?id=875bddac19675f7e971f56d9c5d39a9912dc6e38 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/protection-domain-mapper/+bug/2062667/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2062414] Re: busybox 1.36.1 FTBFS with current kernel headers on noble
** Bug watch added: Busybox Bugzilla #16042 https://bugs.busybox.net/show_bug.cgi?id=16042 ** Also affects: busybox via https://bugs.busybox.net/show_bug.cgi?id=16042 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to busybox in Ubuntu. https://bugs.launchpad.net/bugs/2062414 Title: busybox 1.36.1 FTBFS with current kernel headers on noble Status in BusyBox: Unknown Status in busybox package in Ubuntu: Fix Released Bug description: The networking/tc.c unit in busybox relies upon the CBQ (class based queue) UAPI in the kernel. Unfortunately this was removed in [1]. At present, there is no upstream patch (or even bug report that I can find), and this close to the release patching the kernel to resolve things is not going to happen. Will attach a patch re-instating the defines from the removed headers. [1]: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/noble/commit/?id=33241dca486264193ed68167c8eeae1fb197f3df To manage notifications about this bug go to: https://bugs.launchpad.net/busybox/+bug/2062414/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2062564] Re: [FFe] Seed pemmican
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu-seeds/+git/ubuntu-seeds/+merge/463674 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/2062564 Title: [FFe] Seed pemmican Status in pemmican package in Ubuntu: New Status in ubuntu-meta package in Ubuntu: New Bug description: [ Impact ] Add pemmican to raspi server and desktop images in order that Pi 5 users can be notified if/when overcurrent or undervolt events occur (potentially resulting in brownout, data-corruption, and all manner of other symptoms typically caused as a result of undervolt). [ Test Plan ] On all supported models of Pi: * Boot the image with pemmican installed * Ensure boot proceeds normally with package installed and that no warnings appear On the Pi 5 specifically: * Boot the image normally * Ensure boot proceeds normally with package installed and that no warnings appear * Using bench power-supply to back-feed the Pi, lower voltage until brownout occurs * Reboot and ensure undervolt warning is shown * Shutdown and boot with PSU that cannot negotiate 5A * Ensure deficient PSU warning is shown On the Pi 5 desktop image specifically: * Boot desktop image * Attach USB load tester and raise current draw until USB ports fail * Ensure overcurrent warning is displayed [ Regression Potential ] Quite low given all the tests noted above have already been performed on all supported models. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pemmican/+bug/2062564/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2062414] Re: busybox 1.36.1 FTBFS with current kernel headers on noble
Build reference: https://launchpad.net/ubuntu/+source/busybox/1:1.36.1-6ubuntu2/+build/28036868 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to busybox in Ubuntu. https://bugs.launchpad.net/bugs/2062414 Title: busybox 1.36.1 FTBFS with current kernel headers on noble Status in busybox package in Ubuntu: New Bug description: The networking/tc.c unit in busybox relies upon the CBQ (class based queue) UAPI in the kernel. Unfortunately this was removed in [1]. At present, there is no upstream patch (or even bug report that I can find), and this close to the release patching the kernel to resolve things is not going to happen. Will attach a patch re-instating the defines from the removed headers. [1]: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/noble/commit/?id=33241dca486264193ed68167c8eeae1fb197f3df To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/2062414/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2062414] Re: busybox 1.36.1 FTBFS with current kernel headers on noble
Revised patch with upstream bug links ** Patch added: "2-2062414.debdiff" https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/2062414/+attachment/5767659/+files/2-2062414.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to busybox in Ubuntu. https://bugs.launchpad.net/bugs/2062414 Title: busybox 1.36.1 FTBFS with current kernel headers on noble Status in busybox package in Ubuntu: New Bug description: The networking/tc.c unit in busybox relies upon the CBQ (class based queue) UAPI in the kernel. Unfortunately this was removed in [1]. At present, there is no upstream patch (or even bug report that I can find), and this close to the release patching the kernel to resolve things is not going to happen. Will attach a patch re-instating the defines from the removed headers. [1]: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/noble/commit/?id=33241dca486264193ed68167c8eeae1fb197f3df To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/2062414/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2062414] Re: busybox 1.36.1 FTBFS with current kernel headers on noble
** Patch added: "1-2062414.debdiff" https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/2062414/+attachment/5767655/+files/1-2062414.debdiff ** Tags added: update-excuse -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to busybox in Ubuntu. https://bugs.launchpad.net/bugs/2062414 Title: busybox 1.36.1 FTBFS with current kernel headers on noble Status in busybox package in Ubuntu: New Bug description: The networking/tc.c unit in busybox relies upon the CBQ (class based queue) UAPI in the kernel. Unfortunately this was removed in [1]. At present, there is no upstream patch (or even bug report that I can find), and this close to the release patching the kernel to resolve things is not going to happen. Will attach a patch re-instating the defines from the removed headers. [1]: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/noble/commit/?id=33241dca486264193ed68167c8eeae1fb197f3df To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/2062414/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2062414] [NEW] busybox 1.36.1 FTBFS with current kernel headers on noble
Public bug reported: The networking/tc.c unit in busybox relies upon the CBQ (class based queue) UAPI in the kernel. Unfortunately this was removed in [1]. At present, there is no upstream patch (or even bug report that I can find), and this close to the release patching the kernel to resolve things is not going to happen. Will attach a patch re-instating the defines from the removed headers. [1]: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/noble/commit/?id=33241dca486264193ed68167c8eeae1fb197f3df ** Affects: busybox (Ubuntu) Importance: Undecided Status: New ** Tags: rls-nn-incoming update-excuse ** Tags added: rls-nn-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to busybox in Ubuntu. https://bugs.launchpad.net/bugs/2062414 Title: busybox 1.36.1 FTBFS with current kernel headers on noble Status in busybox package in Ubuntu: New Bug description: The networking/tc.c unit in busybox relies upon the CBQ (class based queue) UAPI in the kernel. Unfortunately this was removed in [1]. At present, there is no upstream patch (or even bug report that I can find), and this close to the release patching the kernel to resolve things is not going to happen. Will attach a patch re-instating the defines from the removed headers. [1]: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/noble/commit/?id=33241dca486264193ed68167c8eeae1fb197f3df To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/2062414/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1097467] Re: bash does not fulfill --rcfile option properly
Attaching new debdiff based on the current noble version. ** Patch added: "1097467-3.debdiff" https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1097467/+attachment/5766422/+files/1097467-3.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1097467 Title: bash does not fulfill --rcfile option properly Status in Gnu Bash: New Status in bash package in Ubuntu: Confirmed Bug description: I am starting a bash shell using $ bash --noprofile --rcfile my-custom-bash-rc-file Due to the --rcflag, the newly started bash should *not* execute commands from /etc/bash.bashrc. That is at least how I interpret `man bash`: --rcfile file Execute commands from file instead of the system wide initialization file /etc/bash.bashrc and the standard personal initial‐ ization file ~/.bashrc if the shell is interactive (see INVOCATION below). However, it seems that the commands in /etc/bash.bashrc are in fact executed. To see/reproduce/diagnose this, on Ubuntu I believe one can just invoke bash like this (as the regular user): $ touch testrc $ env -i bash --noprofile --rcfile testrc The expected result would be that nothing special is printed on the terminal. However, there is an error message, which is printed from /etc/bash.bashrc. The "env -i" causes $HOME to not be set in the invoked shell, which in turn triggers the error. The error message is: > To run a command as administrator (user "root"), use "sudo ". > See "man sudo_root" for details. Another way to see this -- without the "env -i" -- is to add a command to /etc/bash.bashrc, such as echo HELLO THERE To trigger the bug(?), one can then just do $ touch testrc $ bash --noprofile --rcfile testrc The expected result would be that nothing special is shown in the terminal. However, it turns out that the string HELLO THERE is printed. To manage notifications about this bug go to: https://bugs.launchpad.net/gnubash/+bug/1097467/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2060730] Re: totem cannot install codecs via packagekit
Sorry, I should give a bit more context on this issue to clarify things. The test for this issue comes from the ISO tests for the Ubuntu Desktop for Raspberry Pi images. The test intends to check whether a fresh install can play a video "out of the box". The video used in the test is https://archive.org/download/BigBuckBunny_124/Content/big_buck_bunny_720p_surround.mp4 which is downloaded and opened normally. The video deliberately uses a codec that isn't seeded and installed by default (but is a commonly used format) in the expectation that totem will guide the user through installing the necessary bits (which it used to back in groovy, but doesn't since -- incidentally the reason this wasn't noticed in jammy is because it failed to even open the video at that point, but that's now been fixed). Seeding gstreamer1.0-packagekit is probably fine (the whole of gstreamer's in main). Seeding gnome-software is likely not (given we're using snap-store for software delivery currently). Is app-center intended to fill that gap in future? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to packagekit in Ubuntu. https://bugs.launchpad.net/bugs/2060730 Title: totem cannot install codecs via packagekit Status in App Center: Triaged Status in packagekit package in Ubuntu: Invalid Status in totem package in Ubuntu: Invalid Bug description: While attempting to play a video on Ubuntu noble desktop for raspberry pi, totem attempts to locate a package for the H.264 codec but cannot find a service providing org.freedesktop.PackageKit. This is strange given that packagekit is installed, provides packagekit.service, which declares that it provides that name over DBus. Specifically, the following is output by totem: ** Message: 21:13:39.000: Missing plugin: gstreamer|1.0|totem|MPEG-4 AAC decoder|decoder-audio/mpeg, mpegversion=(int)4, level=(string)4, base-profile=(string)lc, profile=(string)lc (MPEG-4 AAC decoder) ** Message: 21:13:39.000: Missing plugin: gstreamer|1.0|totem|H.264 (Main Profile) decoder|decoder-video/x-h264, level=(string)3.1, profile=(string)main (H.264 (Main Profile) decoder) ** Message: 21:13:39.414: PackageKit: xid = 0 ** Message: 21:13:39.414: PackageKit: desktop_id = org.gnome.Totem.desktop ** Message: 21:13:39.414: PackageKit: Codec nice name: MPEG-4 AAC decoder ** Message: 21:13:39.414: PackageKit: ignoring field named level ** Message: 21:13:39.414: PackageKit: ignoring field named base-profile ** Message: 21:13:39.414: PackageKit: ignoring field named profile ** Message: 21:13:39.414: PackageKit: field is: mpegversion, type: gint ** Message: 21:13:39.414: PackageKit: structure: gstreamer1(decoder-audio/mpeg)(mpegversion=4)()(64bit) ** Message: 21:13:39.414: PackageKit: Codec nice name: H.264 (Main Profile) decoder ** Message: 21:13:39.414: PackageKit: ignoring field named level ** Message: 21:13:39.414: PackageKit: ignoring field named profile ** Message: 21:13:39.414: PackageKit: structure: gstreamer1(decoder-video/x-h264)()(64bit) ** Message: 21:13:39.434: PackageKit: Did not install codec: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.PackageKit was not provided by any .service files ** Message: 21:13:39.441: No installation candidate for missing plugins found. The packagekit.service is defined as: $ systemctl cat packagekit.service # /usr/lib/systemd/system/packagekit.service [Unit] Description=PackageKit Daemon # PK doesn't know how to do anything on ostree-managed systems; # currently the design is to have dedicated daemons like # eos-updater and rpm-ostree, and gnome-software talks to those. ConditionPathExists=!/run/ostree-booted Wants=network-online.target [Service] Type=dbus BusName=org.freedesktop.PackageKit User=root ExecStart=/usr/libexec/packagekitd And just to demonstrate packagekit is actually running: $ systemctl status packagekit.service ● packagekit.service - PackageKit Daemon Loaded: loaded (/usr/lib/systemd/system/packagekit.service; static) Active: active (running) since Tue 2024-04-09 21:11:35 BST; 2min 23s ago Main PID: 1565 (packagekitd) Tasks: 4 (limit: 3864) Memory: 6.2M (peak: 6.7M) CPU: 180ms CGroup: /system.slice/packagekit.service └─1565 /usr/libexec/packagekitd Apr 09 21:11:34 fozzie systemd[1]: Starting packagekit.service - PackageKit Daemon... Apr 09 21:11:34 fozzie PackageKit[1565]: daemon start Apr 09 21:11:35 fozzie systemd[1]: Started packagekit.service - PackageKit Daemon. To manage notifications about this bug go to: https://bugs.launchpad.net/app-center/+bug/2060730/+subscriptions -- Mailing
[Touch-packages] [Bug 1097467] Re: bash does not fulfill --rcfile option properly
Bah, looks like this upload got accidentally dropped by the subsequent merge for noble. I'll rebase and re-proposed it when I've got some time... ** Changed in: bash (Ubuntu) Status: Fix Committed => Confirmed ** Changed in: bash (Ubuntu) Assignee: Dan Bungert (dbungert) => Dave Jones (waveform) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1097467 Title: bash does not fulfill --rcfile option properly Status in Gnu Bash: New Status in bash package in Ubuntu: Confirmed Bug description: I am starting a bash shell using $ bash --noprofile --rcfile my-custom-bash-rc-file Due to the --rcflag, the newly started bash should *not* execute commands from /etc/bash.bashrc. That is at least how I interpret `man bash`: --rcfile file Execute commands from file instead of the system wide initialization file /etc/bash.bashrc and the standard personal initial‐ ization file ~/.bashrc if the shell is interactive (see INVOCATION below). However, it seems that the commands in /etc/bash.bashrc are in fact executed. To see/reproduce/diagnose this, on Ubuntu I believe one can just invoke bash like this (as the regular user): $ touch testrc $ env -i bash --noprofile --rcfile testrc The expected result would be that nothing special is printed on the terminal. However, there is an error message, which is printed from /etc/bash.bashrc. The "env -i" causes $HOME to not be set in the invoked shell, which in turn triggers the error. The error message is: > To run a command as administrator (user "root"), use "sudo ". > See "man sudo_root" for details. Another way to see this -- without the "env -i" -- is to add a command to /etc/bash.bashrc, such as echo HELLO THERE To trigger the bug(?), one can then just do $ touch testrc $ bash --noprofile --rcfile testrc The expected result would be that nothing special is shown in the terminal. However, it turns out that the string HELLO THERE is printed. To manage notifications about this bug go to: https://bugs.launchpad.net/gnubash/+bug/1097467/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2060693] Re: No welcome/login sound on Ubuntu desktop
** Summary changed: - No login sound on Ubuntu desktop + No welcome/login sound on Ubuntu desktop -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libcanberra in Ubuntu. https://bugs.launchpad.net/bugs/2060693 Title: No welcome/login sound on Ubuntu desktop Status in libcanberra package in Ubuntu: New Bug description: Under the Ubuntu desktop for Raspberry Pi, for several recent releases, the startup sound from the Yaru sound theme has failed to play both at the initial setup (from oem-config, where it used to play just before language selection), and at the greeter. This worked in Jammy (22.04), but on at least mantic (23.10) and the forthcoming noble (24.04) (and possibly earlier), this has failed. It's not due to a crash in canberra-gtk-play (used to play the sound). The only hint that something has failed appears in the oem-config.log: Failed to play sound: Not available Unfortunately there's nothing else in the log that hints at why canberra-gtk-play is failing. There are several similar bug report, but I doubt they are related given their age (e.g. LP: #1002114 relates to ubuntu 12.04 which had a very different sound stack and predates the preinstalled desktop images). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libcanberra/+bug/2060693/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1942260] Re: compress firmware in /lib/firmware
This was fixed with version 11 of linux-firmware-raspi in noble; I don't see a great deal of point in expending the effort to backport this to mantic, however, so I'll set that to invalid. ** Changed in: linux-firmware-raspi (Ubuntu) Status: Confirmed => Fix Released ** Changed in: linux-firmware-raspi (Ubuntu Mantic) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1942260 Title: compress firmware in /lib/firmware Status in firmware-sof package in Ubuntu: Fix Released Status in initramfs-tools package in Ubuntu: Fix Released Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware-raspi package in Ubuntu: Fix Released Status in firmware-sof source package in Mantic: Fix Released Status in initramfs-tools source package in Mantic: Fix Released Status in linux-firmware source package in Mantic: Fix Released Status in linux-firmware-raspi source package in Mantic: Won't Fix Bug description: -- initramfs-tools [Impact] * linux supports xz compressed linux-firmware which saves disk space. In focal, initramfs-tools only knows how to included uncompressed firmware files (even when kernel supports loading compressed ones). Newer releases of linux-firmware may use compressed firmware files only, in such cases it would be nice for focal's initramfs-tools to support compressed firmware files in case of partial or incomplete upgrades (i.e. linux-firmware force installed or upgraded, without newer initramfs-tools). The proposed changes to initramfs-tools are backwards and forwards compatible, they prefer to include uncompressed firmware files; and if missing, include compressed firmware files in their uncompressed form. Thus maintaining compatibility with any kernels, irrespective of compressed/uncompressed firmware inputs. [Test Plan] * Compress all files shipped by linux-firmware with xz * Rebuild initrd * Check that all the same firmware files are still included in the initramfs, in their uncompressed form as before [Where problems could occur] * This SRU is precautionary to prevent accidental installation of compressed linux-firmware from generating incorrect initramfs. It should be noted that whilst initramfs-tools would create a compatible initramfs with any kernels, pre-v5.3 kernels do not support xz compressed firmware files at runtime. Mixing this new initramfs with compressed firmwares and pre 5.3 kernels may lead to expectations of supporting compressed firmware files with them only working at initrd stage and not at runtime. [Other Info] Original bug report Some facts: - The linux kernel has supported loading xz compressed firmware since 5.3 - The size of /lib/firmware in impish is ~650Mb (and growing) - The compressed size of firmware could be ~230Mb It would be nice to install compressed firmware to save space. Here are the plans from the Fedora project: https://fedoraproject.org/wiki/Changes/CompressKernelFirmware To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firmware-sof/+bug/1942260/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2060730] Re: totem cannot install codecs via packagekit
Adding affects packagekit as I've no idea if this is totem's fault or packagekit's. ** Also affects: packagekit (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to packagekit in Ubuntu. https://bugs.launchpad.net/bugs/2060730 Title: totem cannot install codecs via packagekit Status in packagekit package in Ubuntu: New Status in totem package in Ubuntu: New Bug description: While attempting to play a video on Ubuntu noble desktop for raspberry pi, totem attempts to locate a package for the H.264 codec but cannot find a service providing org.freedesktop.PackageKit. This is strange given that packagekit is installed, provides packagekit.service, which declares that it provides that name over DBus. Specifically, the following is output by totem: ** Message: 21:13:39.000: Missing plugin: gstreamer|1.0|totem|MPEG-4 AAC decoder|decoder-audio/mpeg, mpegversion=(int)4, level=(string)4, base-profile=(string)lc, profile=(string)lc (MPEG-4 AAC decoder) ** Message: 21:13:39.000: Missing plugin: gstreamer|1.0|totem|H.264 (Main Profile) decoder|decoder-video/x-h264, level=(string)3.1, profile=(string)main (H.264 (Main Profile) decoder) ** Message: 21:13:39.414: PackageKit: xid = 0 ** Message: 21:13:39.414: PackageKit: desktop_id = org.gnome.Totem.desktop ** Message: 21:13:39.414: PackageKit: Codec nice name: MPEG-4 AAC decoder ** Message: 21:13:39.414: PackageKit: ignoring field named level ** Message: 21:13:39.414: PackageKit: ignoring field named base-profile ** Message: 21:13:39.414: PackageKit: ignoring field named profile ** Message: 21:13:39.414: PackageKit: field is: mpegversion, type: gint ** Message: 21:13:39.414: PackageKit: structure: gstreamer1(decoder-audio/mpeg)(mpegversion=4)()(64bit) ** Message: 21:13:39.414: PackageKit: Codec nice name: H.264 (Main Profile) decoder ** Message: 21:13:39.414: PackageKit: ignoring field named level ** Message: 21:13:39.414: PackageKit: ignoring field named profile ** Message: 21:13:39.414: PackageKit: structure: gstreamer1(decoder-video/x-h264)()(64bit) ** Message: 21:13:39.434: PackageKit: Did not install codec: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.PackageKit was not provided by any .service files ** Message: 21:13:39.441: No installation candidate for missing plugins found. The packagekit.service is defined as: $ systemctl cat packagekit.service # /usr/lib/systemd/system/packagekit.service [Unit] Description=PackageKit Daemon # PK doesn't know how to do anything on ostree-managed systems; # currently the design is to have dedicated daemons like # eos-updater and rpm-ostree, and gnome-software talks to those. ConditionPathExists=!/run/ostree-booted Wants=network-online.target [Service] Type=dbus BusName=org.freedesktop.PackageKit User=root ExecStart=/usr/libexec/packagekitd And just to demonstrate packagekit is actually running: $ systemctl status packagekit.service ● packagekit.service - PackageKit Daemon Loaded: loaded (/usr/lib/systemd/system/packagekit.service; static) Active: active (running) since Tue 2024-04-09 21:11:35 BST; 2min 23s ago Main PID: 1565 (packagekitd) Tasks: 4 (limit: 3864) Memory: 6.2M (peak: 6.7M) CPU: 180ms CGroup: /system.slice/packagekit.service └─1565 /usr/libexec/packagekitd Apr 09 21:11:34 fozzie systemd[1]: Starting packagekit.service - PackageKit Daemon... Apr 09 21:11:34 fozzie PackageKit[1565]: daemon start Apr 09 21:11:35 fozzie systemd[1]: Started packagekit.service - PackageKit Daemon. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/packagekit/+bug/2060730/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037015] Re: Screen corruption of slides during install on Raspberry Pi 4
There's an intriguingly different style of corruption in the noble images on the Pi 5. It's still just on the installer's slides, but it's more ... "chunky"? I'll attach a photo... ** Attachment added: "slide-corruption-2.jpg" https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/2037015/+attachment/5762908/+files/slide-corruption-2.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2037015 Title: Screen corruption of slides during install on Raspberry Pi 4 Status in mesa package in Ubuntu: Confirmed Status in ubiquity package in Ubuntu: Confirmed Status in webkit2gtk package in Ubuntu: Confirmed Bug description: During the initial configuration of the Ubuntu Desktop for Raspberry Pi (the oem-config process, derived from ubiquity), on the Mantic beta images, after the various pages of information have been filled out and the process moves onto configuration, the "slide deck" that is usually displayed during the process appeared corrupted as if a horizontal stride were incorrectly set somewhere. I'm attached a photo of the screen (as, while I could take a screenshot during the process, it evidently wasn't saved somewhere persistent). I originally thought this might be a regression of LP: #1924251 as the corruption in the window looks very similar (incorrect horizontal stride causing "banding"), but I tested the embedded browser (via the help system) after completing setup and it worked perfectly so that's *probably* unrelated. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/2037015/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2060693] [NEW] No login sound on Ubuntu desktop
Public bug reported: Under the Ubuntu desktop for Raspberry Pi, for several recent releases, the startup sound from the Yaru sound theme has failed to play both at the initial setup (from oem-config, where it used to play just before language selection), and at the greeter. This worked in Jammy (22.04), but on at least mantic (23.10) and the forthcoming noble (24.04) (and possibly earlier), this has failed. It's not due to a crash in canberra-gtk-play (used to play the sound). The only hint that something has failed appears in the oem-config.log: Failed to play sound: Not available Unfortunately there's nothing else in the log that hints at why canberra-gtk-play is failing. There are several similar bug report, but I doubt they are related given their age (e.g. LP: #1002114 relates to ubuntu 12.04 which had a very different sound stack and predates the preinstalled desktop images). ** Affects: libcanberra (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libcanberra in Ubuntu. https://bugs.launchpad.net/bugs/2060693 Title: No login sound on Ubuntu desktop Status in libcanberra package in Ubuntu: New Bug description: Under the Ubuntu desktop for Raspberry Pi, for several recent releases, the startup sound from the Yaru sound theme has failed to play both at the initial setup (from oem-config, where it used to play just before language selection), and at the greeter. This worked in Jammy (22.04), but on at least mantic (23.10) and the forthcoming noble (24.04) (and possibly earlier), this has failed. It's not due to a crash in canberra-gtk-play (used to play the sound). The only hint that something has failed appears in the oem-config.log: Failed to play sound: Not available Unfortunately there's nothing else in the log that hints at why canberra-gtk-play is failing. There are several similar bug report, but I doubt they are related given their age (e.g. LP: #1002114 relates to ubuntu 12.04 which had a very different sound stack and predates the preinstalled desktop images). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libcanberra/+bug/2060693/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2057927] Re: lxd vga console throws "Operation not permitted" error
I see a basically identical message (and dmesg apparmor output) with "lxc profile edit default": unshare: write failed /proc/self/uid_map: Operation not permitted And the dmesg entry: [ 194.625507] audit: type=1400 audit(1711709095.424:293): apparmor="DENIED" operation="capable" class="cap" profile="unprivileged_userns" pid=6885 comm="unshare" capability=21 capname="sys_admin" -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/2057927 Title: lxd vga console throws "Operation not permitted" error Status in apparmor package in Ubuntu: Confirmed Status in lxd package in Ubuntu: Confirmed Bug description: Since I upgraded to Noble the lxd vga console doesn't work anymore. I am using the lxd latest/stable snap (5.20-f3dd836). When trying to attach a vga console to an lxd vm I get: unshare: write failed /proc/self/uid_map: Operation not permitted It seems to be related to apparmor, I can see a matching DENIAL message in dmesg: [ 4735.233989] audit: type=1400 audit(1710419600.517:300): apparmor="DENIED" operation="capable" class="cap" profile="unprivileged_userns" pid=13157 comm="unshare" capability=21 capname="sys_admin" To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2057927/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2036358] Re: systemd wait-online now times out after jammy and lunar upgrade
> If you have a bunch of unmanaged interfaces, then you should use a > drop-in configuration to pass the --any flag to > systemd-networkd-wait-online: > > cat > /etc/systemd/system/systemd-networkd-wait-online.service.d/any.conf << > EOF > [Service] > ExecStart= > ExecStart=/lib/systemd/systemd-networkd-wait-online --any > EOF > > This makes it so that systemd-networkd-wait-online will return success once > at least one interface becomes configured. Unfortunately this doesn't appear to work. I've tried this on the current noble dailies (which also suffer the 2 minute boot delay on the server images due to this issue). The default netplan config is simply: network: version: 2 ethernets: eth0: dhcp4: true optional: true This displays the issue, even with --any presumably because wlan0 is unmanaged so networkctl reports the online state is "unknown" (even when eth0 is happily configured and routable). I attempting making wlan0 "managed" but optional. This requires a mandatory access point to be defined to conform to the YAML schema, so I added a fake one (I should open a separate issue for this because I shouldn't have to make up access points just to mark an interface optional): network: version: 2 ethernets: eth0: dhcp4: true optional: true wifis: wlan0: dhcp4: true optional: true access-points: foo: password: foobarbaz Unfortunately this also displays the issue. This time wlan0 is managed, but "configuring" and the online state is still "unknown". So far as I can tell, the --any option doesn't match the behaviour claimed in the man-page (i.e. "exits with success when at least one interface becomes online"). > There is no workaround for this with the stock netplan config on > raspberry pi, which trips this bug. But you can customize > /etc/netplan/ on your system to mark your expected/required network > interfaces as "optional: false" (which is the default if > unspecified); AIUI that would avoid this issue with > systemd-networkd. This *does* work ... assuming the Pi actually has a network interface. If the Pi is networkless, it's unfortunately doomed to the 2 minute delay still. And obviously I don't want to make eth0 mandatory by default in the images (which would break the 3A+ and Zero 2W, which lack eth0 entirely). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/2036358 Title: systemd wait-online now times out after jammy and lunar upgrade Status in systemd package in Ubuntu: Invalid Status in systemd source package in Jammy: Fix Released Status in systemd source package in Lunar: Fix Released Bug description: [NOTE] If you are running a desktop system and you see this issue, you should run: $ systemctl disable --now systemd-networkd.service This will disable systemd-networkd and associated units, including systemd-networkd-wait-online.service. NetworkManager and systemd- networkd should not be running at the same time. On desktop, NetworkManager is the default network stack. [Impact] When all interfaces are "not required for online", e.g. when they are marked "optional: true" in netplan, systemd-networkd-wait-online will timeout. Or, in other words, systemd-networkd-wait-online will timeout even though all interfaces are ignored, hence none of them will ever be marked as "ready." Depending on what units depend on network- online.target, this can delay boot by 120 seconds (the default timeout for systemd-networkd-wait-online). [Test Plan] 1. Create a new LXD container. These instructions assume jammy is the release, but the same can be done for lunar. $ lxc launch ubuntu-daily:jammy jammy $ lxc exec jammy bash 2. Once in the container, modify the default /etc/netplan/10-lxc.yaml so that eth0 is configured with "optional: true": $ vi /etc/netplan/50-cloud-init.yaml # Use whatever editor you like $ cat /etc/netplan/50-cloud-init.yaml network: version: 2 ethernets: eth0: dhcp4: true dhcp-identifier: mac optional: true 3. Re-generate and apply the netplan configuration. $ netplan generate $ netplan apply 4. Manually run systemd-networkd-wait-online, and observe that all links are ignored, and the command times out: $ SYSTEMD_LOG_LEVEL=debug /lib/systemd/systemd-networkd-wait-online --timeout=10 Found link lo(1) Found link eth0(19) lo: link is ignored eth0: link is ignored Timeout occurred while waiting for network connectivity. [Where problems could occur] This patch partially re-instates a patch remove in bug 1982218. However, instead of exiting if all links are unmanaged, we exit if all links are ignored in manager_configured(). If the patch was wrong, we may re-introduce bug 1982218, so as part of this
[Touch-packages] [Bug 2055351] Re: [amdgpu] Firefox and Chromium browser windows are corrupt in Xorg
This looks like it's the same issue as this: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/2004532 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2055351 Title: [amdgpu] Firefox and Chromium browser windows are corrupt in Xorg Status in mesa package in Ubuntu: New Status in xserver-xorg-video-amdgpu package in Ubuntu: New Bug description: I downloaded the 22.04.4 iso and did a fresh install on an AMD Athlon 200GE using built-in graphics. (Radeon™ Vega 3 Graphics) Firefox and Chromium browsers had their windows corrupted to the point where they were unreadable. I think this is an xorg bug, because when I installed Wayland and logged in with a Wayland session, the browsers displayed correctly. Same behaviour with an Athlon 220GE. KDE or Ubuntu's Gnome desktop made no difference - it seemed to be xorg vs Wayland that was the critical difference. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CompositorRunning: None CurrentDesktop: ubuntu:GNOME DistUpgraded: Fresh install DistroCodename: jammy DistroRelease: Ubuntu 22.04 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev cb) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. PRIME Motherboard [1043:876b] InstallationDate: Installed on 2024-02-26 (3 days ago) InstallationMedia: Kubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240216.1) MachineType: System manufacturer System Product Name Package: xorg-server (not installed) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-21-generic root=UUID=7e6c3c76-1566-4670-97ab-3755e9a04b18 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-21.21~22.04.1-generic 6.5.8 Tags: jammy wayland-session ubuntu Uname: Linux 6.5.0-21-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/04/2023 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 6210 dmi.board.asset.tag: Default string dmi.board.name: PRIME A320M-K dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr6210:bd09/04/2023:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEA320M-K:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.113-2~ubuntu0.22.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.2.1-1ubuntu3.1~22.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.4-2ubuntu1.7~22.04.8 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CompositorRunning: None CurrentDesktop: ubuntu:GNOME DistUpgraded: Fresh install DistroCodename: jammy DistroRelease: Ubuntu 22.04 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev cb) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. PRIME Motherboard [1043:876b] InstallationDate: Installed on 2024-02-26 (3 days ago) InstallationMedia: Kubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240216.1) MachineType: System manufacturer System Product Name Package: xorg-server (not installed) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-21-generic root=UUID=7e6c3c76-1566-4670-97ab-3755e9a04b18 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-21.21~22.04.1-generic 6.5.8 Tags: jammy ubuntu Uname: Linux 6.5.0-21-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True
[Touch-packages] [Bug 2054683] Re: Please merge lvm2 2.03.16-3 from Debian unstable.
Created MP as suggested by Bryce on the last merge (LP: #2020464) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2054683 Title: Please merge lvm2 2.03.16-3 from Debian unstable. Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-3 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2054683/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2054683] [NEW] Please merge lvm2 2.03.16-3 from Debian unstable.
Public bug reported: Please merge lvm2 2.03.16-3 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. ** Affects: lvm2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2054683 Title: Please merge lvm2 2.03.16-3 from Debian unstable. Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-3 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2054683/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2054683] Re: Please merge lvm2 2.03.16-3 from Debian unstable.
Test builds may be found in ppa:waveform/lvm2 (https://launchpad.net/~waveform/+archive/ubuntu/lvm2) ** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/lvm2/+git/lvm2/+merge/461016 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2054683 Title: Please merge lvm2 2.03.16-3 from Debian unstable. Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-3 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2054683/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2054683] Re: Please merge lvm2 2.03.16-3 from Debian unstable.
Attaching patch against Debian unstable. For ease of review, relevant commits and tags have been pushed to the following repository: https://code.launchpad.net/~waveform/ubuntu/+source/lvm2/+git/lvm2 Specifically: * logical/2.03.16-2ubuntu1 represents our split-out delta on top of old/debian (2.03.16-2) * logical/2.03.16-3ubuntu1 represents our rebased delta on top of new/debian (2.03.16-3) * merge/2.03.16-3ubuntu1 adds changelog and maintainer changes on top of logical/2.03.16-3ubuntu1 Hence, the following command may produce output useful to the purposes of review: git range-diff --creation-factor=100 old/debian..logical/2.03.16-2ubuntu1 new/debian..logical/2.03.16-3ubuntu1 ** Patch added: "1-2054683.debdiff" https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2054683/+attachment/5748479/+files/1-2054683.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2054683 Title: Please merge lvm2 2.03.16-3 from Debian unstable. Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-3 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2054683/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2054517] Re: webkit2gtk renders as corrupt in Raspberry Pi Xorg sessions
This may be a duplicate of LP: #2037015 -- we saw this on mantic first, then noble, in the oem-config process (the first-time setup wizard). Previously it *didn't* affect jammy, but I'm currently running through the ISO tests for the jammy .4 release and it's cropped up there now as well. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2054517 Title: webkit2gtk renders as corrupt in Raspberry Pi Xorg sessions Status in mesa package in Ubuntu: New Status in webkit2gtk package in Ubuntu: New Bug description: webkit2gtk renders as corrupt in Raspberry Pi Xorg sessions. Assuming it doesn't crash first. You first see the corruption in the initial setup wizard on first boot of noble-preinstalled-desktop-arm64+raspi.img.xz but the same corruption is then visible in the Help app on Xorg. ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: libwebkit2gtk-4.1-0 2.43.3-1 ProcVersionSignature: Ubuntu 6.5.0-1005.7-raspi 6.5.3 Uname: Linux 6.5.0-1005-raspi aarch64 ApportVersion: 2.27.0-0ubuntu7 Architecture: arm64 CasperMD5CheckResult: unknown CloudArchitecture: aarch64 CloudID: none CloudName: none CloudPlatform: none CloudSubPlatform: config Date: Wed Feb 21 14:38:56 2024 ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: webkit2gtk UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/2054517/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039104] Re: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control
Tested on mantic install, and as Robie suggested, performed binary debdiff against old versions to ensure only change was the version number. Marking verification done. ** Tags removed: verification-needed-mantic ** Tags added: verification-done-mantic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2039104 Title: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-settings source package in Mantic: Fix Committed Bug description: [SRU Justification] In response to LP: #2038964 and due to the timing we have forked ubuntu-raspi-settings into a separate source package. ubuntu-settings must therefore be updated to drop ubuntu-raspi- settings* from debian/control as otherwise binary builds of the package will be rejected by the archive (if the version number is <= 23.10.6) or will wrongly supersede the fixes that have just been uploaded to mantic (if the version number is > 23.10.6). [Test case] No testing is planned beyond any autopkgtests which may be none (the package itself doesn't have any). This should not be released to -updates on its own, but should be staged in -proposed so any future SRUs needed don't fail to copy due to out-of-date packages. [Where problems may occur] It is unlikely but possible that the removal of the raspi binary package from this source package will have inadvertently modified the contents of the other remaining binary packages. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2039104/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039873] Re: [SRU] liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases
** Summary changed: - liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases + [SRU] liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/2039873 Title: [SRU] liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases Status in lxc package in Ubuntu: Fix Committed Status in lxc source package in Jammy: Confirmed Status in lxc source package in Mantic: Confirmed Status in lxc source package in Noble: Fix Committed Bug description: [ Impact ] LXC 5.0.0 was built with LXC_DEVEL=1 set for Jammy. But for release build we should have LXC_DEVEL=0. LXC_DEVEL is a variable that appears in the /usr/include/lxc/version.h and then can be (and actually it is) used by other projects to detect if liblxc-dev is a development build or stable. Having LXC_DEVEL=1 makes problems for the users who want to build projects those are depend on liblxc from source (for example, LXD, go-lxc: https://github.com/canonical/lxd/pull/12420). Q: Why it was not a problem for so long? A: Because LXC API was stable for a long time, but recently we have extended liblxc API (https://github.com/lxc/lxc/pull/4260) and dependant package go-lxc was updated too (https://github.com/lxc/go-lxc/pull/166). This change was developed properly to be backward compatible with the old versions of liblxc. But, there is a problem. If LXC_DEVEL=1 then the macro check VERSION_AT_LEAST (https://github.com/lxc/go-lxc/blob/ccae595aa49e779f7ecc9250329967aa546acd31/lxc-binding.h#L7) is disabled. That's why we should *not* have LXC_DEVEL=1 for *any* release build of LXC. [ Test Plan ] Install liblxc-dev package and check /usr/include/lxc/version.h file LXC_DEVEL should be 0 [ Where problems could occur ] Theoretically, build of a software which depends on liblxc-dev may start to fail if it assumes that LXC_DEVEL is 1. [ Other Info ] - To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/2039873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039873] Re: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases
Noble's now in proposed and looks to have built successfully so I'll mark that Fix Committed. I'm just uploading the mantic and jammy SRUs (the jammy one took a little longer as the fix is slightly different there; appears the build system changed between jammy and mantic). ** Changed in: lxc (Ubuntu Noble) Status: Confirmed => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/2039873 Title: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases Status in lxc package in Ubuntu: Fix Committed Status in lxc source package in Jammy: Confirmed Status in lxc source package in Mantic: Confirmed Status in lxc source package in Noble: Fix Committed Bug description: [ Impact ] LXC 5.0.0 was built with LXC_DEVEL=1 set for Jammy. But for release build we should have LXC_DEVEL=0. LXC_DEVEL is a variable that appears in the /usr/include/lxc/version.h and then can be (and actually it is) used by other projects to detect if liblxc-dev is a development build or stable. Having LXC_DEVEL=1 makes problems for the users who want to build projects those are depend on liblxc from source (for example, LXD, go-lxc: https://github.com/canonical/lxd/pull/12420). Q: Why it was not a problem for so long? A: Because LXC API was stable for a long time, but recently we have extended liblxc API (https://github.com/lxc/lxc/pull/4260) and dependant package go-lxc was updated too (https://github.com/lxc/go-lxc/pull/166). This change was developed properly to be backward compatible with the old versions of liblxc. But, there is a problem. If LXC_DEVEL=1 then the macro check VERSION_AT_LEAST (https://github.com/lxc/go-lxc/blob/ccae595aa49e779f7ecc9250329967aa546acd31/lxc-binding.h#L7) is disabled. That's why we should *not* have LXC_DEVEL=1 for *any* release build of LXC. [ Test Plan ] Install liblxc-dev package and check /usr/include/lxc/version.h file LXC_DEVEL should be 0 [ Where problems could occur ] Theoretically, build of a software which depends on liblxc-dev may start to fail if it assumes that LXC_DEVEL is 1. [ Other Info ] - To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/2039873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039873] Re: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases
Okay, good enough for me -- I'll sponsor my aforementioned branch for noble and have a look at the mantic and jammy SRUs tomorrow, assuming everything builds happily in noble. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/2039873 Title: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases Status in lxc package in Ubuntu: Confirmed Status in lxc source package in Jammy: Confirmed Status in lxc source package in Mantic: Confirmed Status in lxc source package in Noble: Confirmed Bug description: [ Impact ] LXC 5.0.0 was built with LXC_DEVEL=1 set for Jammy. But for release build we should have LXC_DEVEL=0. LXC_DEVEL is a variable that appears in the /usr/include/lxc/version.h and then can be (and actually it is) used by other projects to detect if liblxc-dev is a development build or stable. Having LXC_DEVEL=1 makes problems for the users who want to build projects those are depend on liblxc from source (for example, LXD, go-lxc: https://github.com/canonical/lxd/pull/12420). Q: Why it was not a problem for so long? A: Because LXC API was stable for a long time, but recently we have extended liblxc API (https://github.com/lxc/lxc/pull/4260) and dependant package go-lxc was updated too (https://github.com/lxc/go-lxc/pull/166). This change was developed properly to be backward compatible with the old versions of liblxc. But, there is a problem. If LXC_DEVEL=1 then the macro check VERSION_AT_LEAST (https://github.com/lxc/go-lxc/blob/ccae595aa49e779f7ecc9250329967aa546acd31/lxc-binding.h#L7) is disabled. That's why we should *not* have LXC_DEVEL=1 for *any* release build of LXC. [ Test Plan ] Install liblxc-dev package and check /usr/include/lxc/version.h file LXC_DEVEL should be 0 [ Where problems could occur ] Theoretically, build of a software which depends on liblxc-dev may start to fail if it assumes that LXC_DEVEL is 1. [ Other Info ] - To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/2039873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039873] Re: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases
I had a little time to look over this again in my patch-pilot shift. I agree it's almost certainly best to just get LXC_DEVEL set correctly quickly. Andreas' suggested branch is a good start, but I agree with the critique that the DEP-8 test should be checking the installed headers rather than the built source. Due to this, it's probably also best if the test is named something other than "build". Also, I agree it shouldn't be marked "superficial". I've pushed a few commits on top of Andreas' to another clone here, which also fixes a build-failure on noble (lib/systemd instead of usr/lib/systemd in d/lxc-utils.install): https://code.launchpad.net/~waveform/ubuntu/+source/lxc/+git/lxc I've tested the DEP-8 passes with the branch, and crucially that it fails when the LXC_DEVEL fix is reverted (which it does). If this looks sane to someone else, I'm happy to sponsor this into noble (and start SRU proceedings for mantic and jammy). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/2039873 Title: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases Status in lxc package in Ubuntu: Confirmed Status in lxc source package in Jammy: Confirmed Status in lxc source package in Mantic: Confirmed Status in lxc source package in Noble: Confirmed Bug description: [ Impact ] LXC 5.0.0 was built with LXC_DEVEL=1 set for Jammy. But for release build we should have LXC_DEVEL=0. LXC_DEVEL is a variable that appears in the /usr/include/lxc/version.h and then can be (and actually it is) used by other projects to detect if liblxc-dev is a development build or stable. Having LXC_DEVEL=1 makes problems for the users who want to build projects those are depend on liblxc from source (for example, LXD, go-lxc: https://github.com/canonical/lxd/pull/12420). Q: Why it was not a problem for so long? A: Because LXC API was stable for a long time, but recently we have extended liblxc API (https://github.com/lxc/lxc/pull/4260) and dependant package go-lxc was updated too (https://github.com/lxc/go-lxc/pull/166). This change was developed properly to be backward compatible with the old versions of liblxc. But, there is a problem. If LXC_DEVEL=1 then the macro check VERSION_AT_LEAST (https://github.com/lxc/go-lxc/blob/ccae595aa49e779f7ecc9250329967aa546acd31/lxc-binding.h#L7) is disabled. That's why we should *not* have LXC_DEVEL=1 for *any* release build of LXC. [ Test Plan ] Install liblxc-dev package and check /usr/include/lxc/version.h file LXC_DEVEL should be 0 [ Where problems could occur ] Theoretically, build of a software which depends on liblxc-dev may start to fail if it assumes that LXC_DEVEL is 1. [ Other Info ] - To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/2039873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039873] Re: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases
Thanks very much for the updated debdiff. There's a lot of changes here to look at and unfortunately I've run out of time looking through it all during my patch-pilot shift, but here's what I've got so far: The major thing that I think needs correction is that this patch is built on top of ubuntu/noble-devel by importing the upstream 5.0.3, but what Stéphane suggested in comment 14 was to take the Debian upstream (currently 5.0.3-2) and build on top of that. In this case, the commits in the repo would be based on debian/sid rather than ubuntu/noble-devel. This would ensure we incorporate the changes Debian has placed on top of lxc, as well as our own (and means in future we can follow the git- ubuntu merge process for this package). The proposed changes also include package renames (which will be necessary if we're basing off the upstream Debian version). As far as I can tell they look sane but I haven't dug deep into this bit yet (it's something I always need to read the policy guides and manuals for!). The requested autopkgtest to ensure LXC_DEVEL==0 is present, and looks good. I have to dash to an appointment now, but I'll try and add some more notes later this evening. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/2039873 Title: liblxc-dev was built with LXC_DEVEL=1 in Ubuntu 22.04 and later releases Status in lxc package in Ubuntu: Confirmed Bug description: [ Impact ] LXC 5.0.0 was built with LXC_DEVEL=1 set for Jammy. But for release build we should have LXC_DEVEL=0. LXC_DEVEL is a variable that appears in the /usr/include/lxc/version.h and then can be (and actually it is) used by other projects to detect if liblxc-dev is a development build or stable. Having LXC_DEVEL=1 makes problems for the users who want to build projects those are depend on liblxc from source (for example, LXD, go-lxc: https://github.com/canonical/lxd/pull/12420). Q: Why it was not a problem for so long? A: Because LXC API was stable for a long time, but recently we have extended liblxc API (https://github.com/lxc/lxc/pull/4260) and dependant package go-lxc was updated too (https://github.com/lxc/go-lxc/pull/166). This change was developed properly to be backward compatible with the old versions of liblxc. But, there is a problem. If LXC_DEVEL=1 then the macro check VERSION_AT_LEAST (https://github.com/lxc/go-lxc/blob/ccae595aa49e779f7ecc9250329967aa546acd31/lxc-binding.h#L7) is disabled. That's why we should *not* have LXC_DEVEL=1 for *any* release build of LXC. [ Test Plan ] Install liblxc-dev package and check /usr/include/lxc/version.h file LXC_DEVEL should be 0 [ Where problems could occur ] Theoretically, build of a software which depends on liblxc-dev may start to fail if it assumes that LXC_DEVEL is 1. [ Other Info ] - To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/2039873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1951586] Re: Need option to specify wifi regulatory domain
Setting network-manager back to confirmed as I think the case is made that this is an issue, despite upstream having reservations about whether network-manager is quite the right place for this particular setting. Also setting netplan.io in jammy to fix released as 0.105 was back-ported there quite a while ago now and the current (22.04.3) image should support setting this at first-boot. Setting kinetic to won't fix (as it's EOL). ** Changed in: network-manager (Ubuntu Kinetic) Status: Incomplete => Won't Fix ** Changed in: network-manager (Ubuntu Jammy) Status: Incomplete => Confirmed ** Changed in: network-manager (Ubuntu) Status: Incomplete => Confirmed ** Changed in: netplan.io (Ubuntu Jammy) Status: Triaged => Fix Released ** Changed in: netplan Assignee: Lukas Märdian (slyon) => (unassigned) ** Also affects: network-manager (Ubuntu Lunar) Importance: Undecided Status: New ** Also affects: netplan.io (Ubuntu Lunar) Importance: Undecided Status: New ** Also affects: network-manager (Ubuntu Noble) Importance: Low Status: Confirmed ** Also affects: netplan.io (Ubuntu Noble) Importance: Medium Status: Fix Released ** Also affects: network-manager (Ubuntu Mantic) Importance: Undecided Status: New ** Also affects: netplan.io (Ubuntu Mantic) Importance: Undecided Status: New ** Changed in: netplan.io (Ubuntu Lunar) Status: New => Fix Released ** Changed in: netplan.io (Ubuntu Mantic) Status: New => Fix Released ** Changed in: network-manager (Ubuntu Lunar) Importance: Undecided => Low ** Changed in: network-manager (Ubuntu Lunar) Status: New => Confirmed ** Changed in: network-manager (Ubuntu Mantic) Importance: Undecided => Low ** Changed in: network-manager (Ubuntu Mantic) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1951586 Title: Need option to specify wifi regulatory domain Status in cloud-init: Invalid Status in netplan: Fix Released Status in NetworkManager: New Status in netplan.io package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Confirmed Status in netplan.io source package in Jammy: Fix Released Status in network-manager source package in Jammy: Confirmed Status in netplan.io source package in Kinetic: Fix Released Status in network-manager source package in Kinetic: Won't Fix Status in netplan.io source package in Lunar: Fix Released Status in network-manager source package in Lunar: Confirmed Status in netplan.io source package in Mantic: Fix Released Status in network-manager source package in Mantic: Confirmed Status in netplan.io source package in Noble: Fix Released Status in network-manager source package in Noble: Confirmed Bug description: It would be nice if netplan offered an option to specify the wifi regulatory domain (country code). For devices such as the Raspberry Pi you are currently advertising that users can simply setup Ubuntu Server headless by putting the wifi configuration details in cloudinit/netplan's "network-config" on the FAT partition of the SD card: https://ubuntu.com/tutorials/how-to-install-ubuntu-on-your-raspberry-pi#3-wifi-or-ethernet But an option to set the wifi country code there does not seem to exist, so may not work. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1951586/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1924251] Re: Embedded browser display corruption under Wayland on Pi desktop
This has been fixed for a couple of releases now (since lunar I believe), and if I recall correctly the issue was indeed the wpe backend mentioned in comment 17. That would suggest this should be "invalid" for gtk and yelp, and "fix released" for webkit2gtk. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1924251 Title: Embedded browser display corruption under Wayland on Pi desktop Status in gtk+3.0 package in Ubuntu: Incomplete Status in webkit2gtk package in Ubuntu: Incomplete Status in yelp package in Ubuntu: Incomplete Bug description: On the jammy Pi desktop, under a wayland session, the body of a window containing an HTML renderer (e.g. help text or a login page) displays corruption. These reproduction cases may not be entirely reliable given that *some* pages appear to render correctly, but I'll include a couple in the hopes of making it reliably reproducible: 1. Open the Lights Off game 2. Select "Help" from the menu 3. In the help window that appears, select any link "Basics", "Rules", and "Strategy" all reliably reproduce the issue for me, but "Help Translate" doesn't so you may need to click around some links until the corruption appears -- however, once it does even navigating back to the prior page which rendered happily now displays the same corruption. Another reproduction case: 1. Open the Settings application 2. Select the Online Applications option from the left 3. Select the Google entry in the list 4. The login window that appears always displays corruption for me The Microsoft option always reliably corrupts for me, but the Facebook one doesn't so again I wonder how reproducible this may be for others (might be worth trying several options if the first doesn't display corruption). The corruption appears in the form of "shredded" content as if a horizontal stride is set incorrectly somewhere, but only appears in the body of the window; the window decorations are unaffected. I'll attach a screenshot of the corrupted help window to illustrate. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1924251/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Changed in: pulseaudio (Ubuntu) Assignee: Dave Jones (waveform) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: Invalid Status in pulseaudio source package in Jammy: Confirmed Status in ubuntu-settings source package in Jammy: Invalid Status in pulseaudio source package in Kinetic: Won't Fix Status in ubuntu-settings source package in Kinetic: Invalid Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1097467] Re: bash does not fulfill --rcfile option properly
Doh, I always forget something... ** Patch added: "1097467-2.debdiff" https://bugs.launchpad.net/gnubash/+bug/1097467/+attachment/5719318/+files/1097467-2.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1097467 Title: bash does not fulfill --rcfile option properly Status in Gnu Bash: New Status in bash package in Ubuntu: Confirmed Bug description: I am starting a bash shell using $ bash --noprofile --rcfile my-custom-bash-rc-file Due to the --rcflag, the newly started bash should *not* execute commands from /etc/bash.bashrc. That is at least how I interpret `man bash`: --rcfile file Execute commands from file instead of the system wide initialization file /etc/bash.bashrc and the standard personal initial‐ ization file ~/.bashrc if the shell is interactive (see INVOCATION below). However, it seems that the commands in /etc/bash.bashrc are in fact executed. To see/reproduce/diagnose this, on Ubuntu I believe one can just invoke bash like this (as the regular user): $ touch testrc $ env -i bash --noprofile --rcfile testrc The expected result would be that nothing special is printed on the terminal. However, there is an error message, which is printed from /etc/bash.bashrc. The "env -i" causes $HOME to not be set in the invoked shell, which in turn triggers the error. The error message is: > To run a command as administrator (user "root"), use "sudo ". > See "man sudo_root" for details. Another way to see this -- without the "env -i" -- is to add a command to /etc/bash.bashrc, such as echo HELLO THERE To trigger the bug(?), one can then just do $ touch testrc $ bash --noprofile --rcfile testrc The expected result would be that nothing special is shown in the terminal. However, it turns out that the string HELLO THERE is printed. To manage notifications about this bug go to: https://bugs.launchpad.net/gnubash/+bug/1097467/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1097467] Re: bash does not fulfill --rcfile option properly
** Patch added: "1097467-1.debdiff" https://bugs.launchpad.net/gnubash/+bug/1097467/+attachment/5719274/+files/1097467-1.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1097467 Title: bash does not fulfill --rcfile option properly Status in Gnu Bash: Unknown Status in bash package in Ubuntu: Confirmed Bug description: I am starting a bash shell using $ bash --noprofile --rcfile my-custom-bash-rc-file Due to the --rcflag, the newly started bash should *not* execute commands from /etc/bash.bashrc. That is at least how I interpret `man bash`: --rcfile file Execute commands from file instead of the system wide initialization file /etc/bash.bashrc and the standard personal initial‐ ization file ~/.bashrc if the shell is interactive (see INVOCATION below). However, it seems that the commands in /etc/bash.bashrc are in fact executed. To see/reproduce/diagnose this, on Ubuntu I believe one can just invoke bash like this (as the regular user): $ touch testrc $ env -i bash --noprofile --rcfile testrc The expected result would be that nothing special is printed on the terminal. However, there is an error message, which is printed from /etc/bash.bashrc. The "env -i" causes $HOME to not be set in the invoked shell, which in turn triggers the error. The error message is: > To run a command as administrator (user "root"), use "sudo ". > See "man sudo_root" for details. Another way to see this -- without the "env -i" -- is to add a command to /etc/bash.bashrc, such as echo HELLO THERE To trigger the bug(?), one can then just do $ touch testrc $ bash --noprofile --rcfile testrc The expected result would be that nothing special is shown in the terminal. However, it turns out that the string HELLO THERE is printed. To manage notifications about this bug go to: https://bugs.launchpad.net/gnubash/+bug/1097467/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1097467] Re: bash does not fulfill --rcfile option properly
It appears this has come up before, and was discussed upstream. [1] and [2] cover discussion of whether --rcfile should ignore the system-wide bashrc (SYS_BASHRC hereafter), with the conclusion from upstream that it should not. [3] is an attempt by someone to fix this upstream by modifying bash's behaviour, which is rejected by the upstream developers. [4] and [5] are the upstream Debian bugs (which I'll link this bug to). At any rate, upstream bash devs have made their position quite clear: the Debian-patched documentation is wrong, and the behaviour of bash is as expected. So, the solution to this bug is to fix the documentation. I'll propose an updated patch here and see if we can't put this decade- old bug to bed! I'll also try and rebase the noble patch upstream for Debian (there's already a patch there, but it's predictably ancient). [1]: https://lists.gnu.org/archive/html/bug-bash/2018-01/msg3.html [2]: https://lists.gnu.org/archive/html/bug-bash/2009-05/msg00031.html [3]: https://savannah.gnu.org/support/index.php?107950 [4]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516152 [5]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=343673 ** Bug watch added: Debian Bug tracker #516152 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516152 ** Bug watch added: Debian Bug tracker #343673 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=343673 ** Also affects: gnubash via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516152 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1097467 Title: bash does not fulfill --rcfile option properly Status in Gnu Bash: Unknown Status in bash package in Ubuntu: Confirmed Bug description: I am starting a bash shell using $ bash --noprofile --rcfile my-custom-bash-rc-file Due to the --rcflag, the newly started bash should *not* execute commands from /etc/bash.bashrc. That is at least how I interpret `man bash`: --rcfile file Execute commands from file instead of the system wide initialization file /etc/bash.bashrc and the standard personal initial‐ ization file ~/.bashrc if the shell is interactive (see INVOCATION below). However, it seems that the commands in /etc/bash.bashrc are in fact executed. To see/reproduce/diagnose this, on Ubuntu I believe one can just invoke bash like this (as the regular user): $ touch testrc $ env -i bash --noprofile --rcfile testrc The expected result would be that nothing special is printed on the terminal. However, there is an error message, which is printed from /etc/bash.bashrc. The "env -i" causes $HOME to not be set in the invoked shell, which in turn triggers the error. The error message is: > To run a command as administrator (user "root"), use "sudo ". > See "man sudo_root" for details. Another way to see this -- without the "env -i" -- is to add a command to /etc/bash.bashrc, such as echo HELLO THERE To trigger the bug(?), one can then just do $ touch testrc $ bash --noprofile --rcfile testrc The expected result would be that nothing special is shown in the terminal. However, it turns out that the string HELLO THERE is printed. To manage notifications about this bug go to: https://bugs.launchpad.net/gnubash/+bug/1097467/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039104] Re: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/455407 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2039104 Title: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-settings source package in Mantic: New Bug description: In response to LP: #2038964 and due to the timing we have forked ubuntu-raspi-settings into a separate source package. ubuntu-settings must therefore be updated to drop ubuntu-raspi- settings* from debian/control as otherwise binary builds of the package will be rejected by the archive (if the version number is <= 23.10.6) or will wrongly supersede the fixes that have just been uploaded to mantic (if the version number is > 23.10.6). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2039104/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039104] Re: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control
Thanks for the quick review! Could someone set up a "mantic" branch on the lp:~ubuntu-desktop/ubuntu/+source/ubuntu-settings repository so I can propose a merge to fix mantic too? (basically the same commit with a lower version number) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2039104 Title: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-settings source package in Mantic: New Bug description: In response to LP: #2038964 and due to the timing we have forked ubuntu-raspi-settings into a separate source package. ubuntu-settings must therefore be updated to drop ubuntu-raspi- settings* from debian/control as otherwise binary builds of the package will be rejected by the archive (if the version number is <= 23.10.6) or will wrongly supersede the fixes that have just been uploaded to mantic (if the version number is > 23.10.6). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2039104/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2039104] Re: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/455178 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2039104 Title: ubuntu-settings must drop ubuntu-raspi-settings* from debian/control Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-settings source package in Mantic: New Bug description: In response to LP: #2038964 and due to the timing we have forked ubuntu-raspi-settings into a separate source package. ubuntu-settings must therefore be updated to drop ubuntu-raspi- settings* from debian/control as otherwise binary builds of the package will be rejected by the archive (if the version number is <= 23.10.6) or will wrongly supersede the fixes that have just been uploaded to mantic (if the version number is > 23.10.6). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2039104/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1951586] Re: Need option to specify wifi regulatory domain
Is this fixed in noble now? No. Is this due to be fixed; I've not heard anything, but happy to be corrected if this is on a roadmap somewhere? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1951586 Title: Need option to specify wifi regulatory domain Status in cloud-init: Invalid Status in netplan: Fix Released Status in NetworkManager: New Status in netplan.io package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Incomplete Status in netplan.io source package in Jammy: Triaged Status in network-manager source package in Jammy: Incomplete Status in netplan.io source package in Kinetic: Fix Released Status in network-manager source package in Kinetic: Incomplete Bug description: It would be nice if netplan offered an option to specify the wifi regulatory domain (country code). For devices such as the Raspberry Pi you are currently advertising that users can simply setup Ubuntu Server headless by putting the wifi configuration details in cloudinit/netplan's "network-config" on the FAT partition of the SD card: https://ubuntu.com/tutorials/how-to-install-ubuntu-on-your-raspberry-pi#3-wifi-or-ethernet But an option to set the wifi country code there does not seem to exist, so may not work. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1951586/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037642] Re: [FFe] Raspberry Pi 5 support
** Changed in: ubuntu-release-notes Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2037642 Title: [FFe] Raspberry Pi 5 support Status in Release Notes for Ubuntu: Fix Released Status in libcamera package in Ubuntu: Triaged Status in linux-meta-raspi package in Ubuntu: Fix Released Status in linux-raspi package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Fix Released Status in pipewire package in Ubuntu: Invalid Status in rpi-eeprom package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Fix Released Bug description: [ Impact ] * HWE for Raspberry Pi 5 https://raspberrypi.com/5 [ Test Plan ] * Private builds tested on all existing/supported Raspberry Pi SKUs in armhf & arm64 variants * No regressions on any existing SKUs * Test that Raspberry Pi 5 boards work [ Where problems could occur ] * Mesa is upgraded, and there are patches to mesa, the raspberry-pi specific provider this has been tested but not as extensively. Separately there is mesa FFe granted to upgrade to latest release, thus these changes piggy-back on top of it. * libcamera has new build-depends on new package libpisp for the raspberry-pi specific provider which also affects pipewire to provide full webcam support. * These dependencies, will need to make their way into gnome platform snaps to be usable by default in Firefox. [ Other Info ] * The proposed code changes have been tested in private, prior to public announcement To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/2037642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] Re: raspi ethernet rename is racy
Figured out a work-around: ensure the matching state of the rename rule matches the end-state of the rename rule so the networkd state machine stops flopping between the two rules. Linked the MP with the required change; will tag ubuntu-release to see if it's not too late for a re- spin. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: Confirmed Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] Re: raspi ethernet rename is racy
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/453340 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: Confirmed Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] Re: raspi ethernet rename is racy
There does seem to be something unusual going on with the lan78xx re- initializing (or restarting?) part way through the boot sequence, causing another round of renaming to kick off (and then everything fails). Bizarre. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: Confirmed Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] Re: raspi ethernet rename is racy
** Changed in: ubuntu-settings (Ubuntu) Importance: Undecided => High ** Changed in: ubuntu-settings (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: Confirmed Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] Re: raspi ethernet rename is racy
** Attachment added: "kern.log from unaffected 2B (rev 1.2)" https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+attachment/5708342/+files/unaffected.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: New Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] Re: raspi ethernet rename is racy
** Attachment added: "kern.log from affected 3B+" https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+attachment/5708341/+files/affected.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: New Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2038964] [NEW] raspi ethernet rename is racy
Public bug reported: The renaming of the ethernet interface (controlled by 10-raspi-eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Tags: raspi-image ** Tags added: raspi-image -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2038964 Title: raspi ethernet rename is racy Status in ubuntu-settings package in Ubuntu: New Bug description: The renaming of the ethernet interface (controlled by 10-raspi- eth0.link in ubuntu-raspi-settings) turns out to be racy. Specifically, in the final mantic server images (but not the desktop images), under armhf or arm64, on the Raspberry Pi 3B+ (but not any other supported board, including the 3B), the interface renames several times during boot. By the end, the interface is left in the enxMACMACMAC state and the netplan configuration fails to apply. Will attach kern.log from an affected platform, and another from an unaffected platform. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2038964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037642] Re: [FFe] Raspberry Pi 5 support
Added text to the release notes [1] detailing Pi 5 support, including the planned SRU of libcamera support. Can others double-check the raspberry pi sections look reasonable, and let me know if we want to mention anything else specific? I've also updated the "known issues" section, removing a couple of bits (totem now works and the audio output selection is now sane out of the box), and adding others (slide corruption on the pi4 during installation). Again, if there's anything missing that should be mentioned please either let me know or feel free to add it yourself! [1]: https://discourse.ubuntu.com/t/mantic-minotaur-release-notes/35534 ** Changed in: ubuntu-release-notes Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2037642 Title: [FFe] Raspberry Pi 5 support Status in Release Notes for Ubuntu: In Progress Status in libcamera package in Ubuntu: Triaged Status in linux-meta-raspi package in Ubuntu: Fix Released Status in linux-raspi package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Fix Released Status in pipewire package in Ubuntu: Invalid Status in rpi-eeprom package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Fix Released Bug description: [ Impact ] * HWE for Raspberry Pi 5 https://raspberrypi.com/5 [ Test Plan ] * Private builds tested on all existing/supported Raspberry Pi SKUs in armhf & arm64 variants * No regressions on any existing SKUs * Test that Raspberry Pi 5 boards work [ Where problems could occur ] * Mesa is upgraded, and there are patches to mesa, the raspberry-pi specific provider this has been tested but not as extensively. Separately there is mesa FFe granted to upgrade to latest release, thus these changes piggy-back on top of it. * libcamera has new build-depends on new package libpisp for the raspberry-pi specific provider which also affects pipewire to provide full webcam support. * These dependencies, will need to make their way into gnome platform snaps to be usable by default in Firefox. [ Other Info ] * The proposed code changes have been tested in private, prior to public announcement To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/2037642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2036358] Re: systemd wait-online now times out after jammy and lunar upgrade
Seeing the same results as comment 27 with the Pi lunar (23.04) image. After installing -proposed and checking systemd-networkd-wait-online, with wlan0 undefined in the netplan configuration (but eth0 set as the default DHCP and optional), it still waits for the full 2 minutes, presumably because wlan0 is not explicitly marked as "not required" as it's not a defined interface in the netplan config? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/2036358 Title: systemd wait-online now times out after jammy and lunar upgrade Status in systemd package in Ubuntu: Invalid Status in systemd source package in Jammy: Fix Committed Status in systemd source package in Lunar: Fix Committed Bug description: [NOTE] If you are running a desktop system and you see this issue, you should run: $ systemctl disable --now systemd-networkd.service This will disable systemd-networkd and associated units, including systemd-networkd-wait-online.service. NetworkManager and systemd- networkd should not be running at the same time. On desktop, NetworkManager is the default network stack. [Impact] When all interfaces are "not required for online", e.g. when they are marked "optional: true" in netplan, systemd-networkd-wait-online will timeout. Or, in other words, systemd-networkd-wait-online will timeout even though all interfaces are ignored, hence none of them will ever be marked as "ready." Depending on what units depend on network- online.target, this can delay boot by 120 seconds (the default timeout for systemd-networkd-wait-online). [Test Plan] 1. Create a new LXD container. These instructions assume jammy is the release, but the same can be done for lunar. $ lxc launch ubuntu-daily:jammy jammy $ lxc exec jammy bash 2. Once in the container, modify the default /etc/netplan/10-lxc.yaml so that eth0 is configured with "optional: true": $ vi /etc/netplan/50-cloud-init.yaml # Use whatever editor you like $ cat /etc/netplan/50-cloud-init.yaml network: version: 2 ethernets: eth0: dhcp4: true dhcp-identifier: mac optional: true 3. Re-generate and apply the netplan configuration. $ netplan generate $ netplan apply 4. Manually run systemd-networkd-wait-online, and observe that all links are ignored, and the command times out: $ SYSTEMD_LOG_LEVEL=debug /lib/systemd/systemd-networkd-wait-online --timeout=10 Found link lo(1) Found link eth0(19) lo: link is ignored eth0: link is ignored Timeout occurred while waiting for network connectivity. [Where problems could occur] This patch partially re-instates a patch remove in bug 1982218. However, instead of exiting if all links are unmanaged, we exit if all links are ignored in manager_configured(). If the patch was wrong, we may re-introduce bug 1982218, so as part of this SRU verification, that bug should be tested too. Any other regressions would also be related to systemd-networkd-wait-online behavior. [Original Description] On Ubuntu 22.04 desktop system using network-manager and upgrading to systemd 249.11-0ubuntu3.10, wait-online now times out which prevents logins (GDM, ssh, console) until it does time out. This seems to be introduced by the change for https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1982218. https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1982218/comments/21 also mentioned the problem on Lunar. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/2036358/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1923363] Re: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/452468 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1923363 Title: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules Status in cloud-init package in Ubuntu: Fix Released Status in ubiquity package in Ubuntu: Invalid Status in ubuntu-settings package in Ubuntu: Confirmed Status in user-setup package in Ubuntu: Invalid Status in cloud-init source package in Impish: Won't Fix Status in ubiquity source package in Impish: Invalid Status in ubuntu-settings source package in Impish: Won't Fix Status in user-setup source package in Impish: Invalid Status in cloud-init source package in Jammy: Confirmed Status in ubiquity source package in Jammy: Invalid Status in ubuntu-settings source package in Jammy: Confirmed Status in user-setup source package in Jammy: Invalid Status in cloud-init source package in Kinetic: Won't Fix Status in ubiquity source package in Kinetic: Invalid Status in ubuntu-settings source package in Kinetic: Won't Fix Status in user-setup source package in Kinetic: Invalid Status in cloud-init source package in Lunar: Won't Fix Status in ubiquity source package in Lunar: Invalid Status in ubuntu-settings source package in Lunar: Won't Fix Status in user-setup source package in Lunar: Invalid Status in cloud-init source package in Mantic: Fix Released Status in ubiquity source package in Mantic: Invalid Status in ubuntu-settings source package in Mantic: Confirmed Status in user-setup source package in Mantic: Invalid Bug description: We're attempting to make the GPIO system on the Raspberry Pi images work "out of the box" on the new image. By default, GPIO kernel devices are made available to members of the "dialout" group which the initial user is added to by default on our server images. However, we've noticed that this isn't the case on the desktop images. The regression potential is minimal; the group already exists and we're simply adding the freshly created user to a new group and not removing any existing memberships. The group in question ("dialout") is also rarely used these days except for providing access to serial consoles, and as mentioned above is already a default membership on the server images. The change has been tested on the desktop image successfully. A test build of the updated image will be made under https://launchpad.net/~waveform/+archive/ubuntu/ubiquity and I'll attach a debdiff shortly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1923363/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037642] Re: [FFe] Raspberry Pi 5 support
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/452468 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2037642 Title: [FFe] Raspberry Pi 5 support Status in libcamera package in Ubuntu: Triaged Status in linux-meta-raspi package in Ubuntu: Triaged Status in linux-raspi package in Ubuntu: Triaged Status in mesa package in Ubuntu: Triaged Status in pipewire package in Ubuntu: Triaged Status in rpi-eeprom package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Triaged Bug description: [ Impact ] * HWE for Raspberry Pi 5 https://raspberrypi.com/5 [ Test Plan ] * Private builds tested on all existing/supported Raspberry Pi SKUs in armhf & arm64 variants * No regressions on any existing SKUs * Test that Raspberry Pi 5 boards work [ Where problems could occur ] * Mesa is upgraded, and there are patches to mesa, the raspberry-pi specific provider this has been tested but not as extensively. Separately there is mesa FFe granted to upgrade to latest release, thus these changes piggy-back on top of it. * libcamera has new build-depends on new package libpisp for the raspberry-pi specific provider which also affects pipewire to provide full webcam support. * These dependencies, will need to make their way into gnome platform snaps to be usable by default in Firefox. [ Other Info ] * The proposed code changes have been tested in private, prior to public announcement To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libcamera/+bug/2037642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037642] Re: [FFe] Raspberry Pi 5 support
** Changed in: rpi-eeprom (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) ** Changed in: ubuntu-settings (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2037642 Title: [FFe] Raspberry Pi 5 support Status in libcamera package in Ubuntu: Triaged Status in linux-meta-raspi package in Ubuntu: Triaged Status in linux-raspi package in Ubuntu: Triaged Status in mesa package in Ubuntu: Triaged Status in pipewire package in Ubuntu: Triaged Status in rpi-eeprom package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: Triaged Bug description: [ Impact ] * HWE for Raspberry Pi 5 https://raspberrypi.com/5 [ Test Plan ] * Private builds tested on all existing/supported Raspberry Pi SKUs in armhf & arm64 variants * No regressions on any existing SKUs * Test that Raspberry Pi 5 boards work [ Where problems could occur ] * Mesa is upgraded, and there are patches to mesa, the raspberry-pi specific provider this has been tested but not as extensively. Separately there is mesa FFe granted to upgrade to latest release, thus these changes piggy-back on top of it. * libcamera has new build-depends on new package libpisp for the raspberry-pi specific provider which also affects pipewire to provide full webcam support. * These dependencies, will need to make their way into gnome platform snaps to be usable by default in Firefox. [ Other Info ] * The proposed code changes have been tested in private, prior to public announcement To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libcamera/+bug/2037642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037642] Re: [FFe] Raspberry Pi 5 support
The rpiboot package can be skipped for now; according to upstream the updated package won't be ready at release. The separate bug LP: #2032178 will track updates if/when I can get the uploaded. ** No longer affects: rpiboot (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2037642 Title: [FFe] Raspberry Pi 5 support Status in libcamera package in Ubuntu: Confirmed Status in linux-firmware-raspi package in Ubuntu: Confirmed Status in linux-meta-raspi package in Ubuntu: Confirmed Status in linux-raspi package in Ubuntu: Confirmed Status in mesa package in Ubuntu: Confirmed Status in pipewire package in Ubuntu: Confirmed Status in rpi-eeprom package in Ubuntu: Confirmed Status in ubuntu-settings package in Ubuntu: Confirmed Bug description: [ Impact ] * HWE for Raspberry Pi 5 https://raspberrypi.com/5 [ Test Plan ] * Private builds tested on all existing/supported Raspberry Pi SKUs in armhf & arm64 variants * No regressions on any existing SKUs * Test that Raspberry Pi 5 boards work [ Where problems could occur ] * Mesa is upgraded, and there are patches to mesa, the raspberry-pi specific provider this has been tested but not as extensively. Separately there is mesa FFe granted to upgrade to latest release, thus these changes piggy-back on top of it. * libcamera has new build-depends on new package libpisp for the raspberry-pi specific provider which also affects pipewire to provide full webcam support. * These dependencies, will need to make their way into gnome platform snaps to be usable by default in Firefox. [ Other Info ] * The proposed code changes have been tested in private, prior to public announcement To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libcamera/+bug/2037642/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2036358] Re: systemd wait-online now times out after jammy and lunar upgrade
Also appears to be affecting the Pi server images (which have no network manager and only use networkd for networking); I've only checked lunar so far. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/2036358 Title: systemd wait-online now times out after jammy and lunar upgrade Status in systemd package in Ubuntu: New Bug description: On Ubuntu 22.04 desktop system using network-manager and upgrading to systemd 249.11-0ubuntu3.10, wait-online now times out which prevents logins (GDM, ssh, console) until it does time out. This seems to be introduced by the change for https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1982218. https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1982218/comments/21 also mentioned the problem on Lunar. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/2036358/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2026637] Re: [mantic] many useful apps are marked for auto removal
** Tags removed: rls-mm-incoming ** Tags added: foundations-todo -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/2026637 Title: [mantic] many useful apps are marked for auto removal Status in ubuntu-meta package in Ubuntu: Triaged Status in ubuntu-release-upgrader package in Ubuntu: Triaged Bug description: Today update want remove a lot of apps. This happens on two systems installed from ISO dated 2023-06-07 and 2023-05-21 corrado@corrado-n03-mm-0607:~$ sudo apt update && sudo apt upgrade [sudo] password for corrado: Hit:1 http://archive.ubuntu.com/ubuntu mantic InRelease Hit:2 http://archive.ubuntu.com/ubuntu mantic-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu mantic-backports InRelease Hit:4 http://archive.ubuntu.com/ubuntu mantic-security InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: aisleriot baobab branding-ubuntu cheese cheese-common file-roller gir1.2-rb-3.0 gnome-mahjongg gnome-mines gnome-sudoku gnome-video-effects gstreamer1.0-clutter-3.0 guile-3.0-libs libavahi-ui-gtk3-0 libcairomm-1.16-1 libcdr-0.1-1 libchamplain-0.12-0 libchamplain-gtk-0.12-0 libcheese-gtk25 libcheese8 libclutter-gst-3.0-0 libdmapsharing-4.0-3 libevent-2.1-7 libfreehand-0.1-1 libfreerdp-client2-2 libglibmm-2.68-1 libgnome-games-support-1-3 libgnome-games-support-common libgpod-common libgpod4 libgtkmm-4.0-0 libgupnp-igd-1.0-4 libixml10 liblc3-0 libminiupnpc17 libmspub-0.1-1 libmujs2 libnatpmp1 libpagemaker-0.0-0 libpangomm-2.48-1 libqqwing2v5 libreoffice-calc libreoffice-draw libreoffice-gnome libreoffice-gtk3 libreoffice-impress librhythmbox-core10 libsdl-image1.2 libsdl1.2debian libsgutils2-1.46-2 libsigc++-3.0-0 libupnp13 libvisio-0.1-1 lp-solve media-player-info python3-mako python3-renderpm python3-reportlab-accel remmina remmina-common remmina-plugin-rdp remmina-plugin-secret remmina-plugin-vnc rhythmbox rhythmbox-data rhythmbox-plugin-alternative-toolbar rhythmbox-plugins shotwell shotwell-common simple-scan transmission-common transmission-gtk Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. corrado@corrado-n03-mm-0607: ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: ubuntu-desktop 1.505 ProcVersionSignature: Ubuntu 6.3.0-7.7-generic 6.3.5 Uname: Linux 6.3.0-7-generic x86_64 ApportVersion: 2.26.1-0ubuntu3 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Jul 9 08:53:45 2023 InstallationDate: Installed on 2023-06-07 (31 days ago) InstallationMedia: Ubuntu 23.10 "Mantic Minotaur" - Daily amd64 (20230607) ProcEnviron: LANG=en_US.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: ubuntu-meta UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-meta/+bug/2026637/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2027847] Re: Bump minimum /boot size in ubuntu-release-upgrader
** Tags removed: rls-ll-incoming ** Tags added: foundations-todo -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/2027847 Title: Bump minimum /boot size in ubuntu-release-upgrader Status in apt package in Ubuntu: Won't Fix Status in dpkg package in Ubuntu: Invalid Status in kernel-package package in Ubuntu: Invalid Status in linux package in Ubuntu: Invalid Status in linux-firmware package in Ubuntu: Invalid Status in linux-kernel-headers package in Ubuntu: Invalid Status in linux-restricted-modules package in Ubuntu: Invalid Status in ubuntu-release-upgrader package in Ubuntu: New Bug description: System information: ubuntu 23.04 x86_64 6.2.0-24-generic Upgrading the system: $ sudo dpkg --configure -a Setting up linux-firmware (20230323.gitbcdcfbcf-0ubuntu1.2) ... update-initramfs: Generating /boot/initrd.img-6.2.0-24-generic I: The initramfs will attempt to resume from /dev/dm-2 I: (/dev/mapper/ubuntu--vg-swap_1) I: Set the RESUME variable to override this. zstd: error 70 : Write error : cannot write block : No space left on device E: mkinitramfs failure zstd -q -1 -T0 70 Check space left (none): $ df -h /boot Filesystem Size Used Avail Use% Mounted on /dev/sdb2 707M 693M 0 100% /boot What is required is to remove older kernels (and purge them most likely). List all the installed kernels except the current one: $ dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' linux-headers-6.2.0-23 linux-headers-6.2.0-23-generic linux-headers-6.2.0-25 linux-headers-6.2.0-25-generic linux-image-6.2.0-23-generic linux-libc-dev:amd64 linux-libc-dev:i386 linux-modules-6.2.0-23-generic linux-modules-6.2.0-25-generic linux-modules-extra-6.2.0-23-generic linux-modules-extra-6.2.0-25-generic Is not possible to uninstall any kernel because fails: $ sudo apt purge linux-headers-6.2.0-23 E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Reconfigure fails again so some kernel have to be manually removed to free up space: $ sudo rm /boot/initrd.img-6.2.0-23-generic $ sudo rm -rf /boot/initrd.img-6.2.0-25-generic.new Now you can reconfigure: $ Remove kernels: $ sudo apt purge linux-headers-6.2.0-23 linux-headers-6.2.0-23-generic linux-headers-6.2.0-25 linux-headers-6.2.0-25-generic linux-image-6.2.0-23-generic linux-modules-6.2.0-23-generic linux-modules-6.2.0-25-generic linux-modules-extra-6.2.0-23-generic linux-modules-extra-6.2.0-25-generic Reboot: $ sudo reboot Upgrade as usual: $ sudo apt update && sudo apt upgrade Before upgrading new kernels I need to check for free space and remove older kernels manually. Fix this so there's only one kernel left. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/2027847/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1923363] Re: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules
** Changed in: ubuntu-settings (Ubuntu Mantic) Assignee: (unassigned) => Dave Jones (waveform) ** Changed in: ubuntu-settings (Ubuntu Jammy) Assignee: (unassigned) => Dave Jones (waveform) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1923363 Title: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules Status in cloud-init package in Ubuntu: Confirmed Status in ubiquity package in Ubuntu: Invalid Status in ubuntu-settings package in Ubuntu: Confirmed Status in user-setup package in Ubuntu: Invalid Status in cloud-init source package in Impish: Won't Fix Status in ubiquity source package in Impish: Invalid Status in ubuntu-settings source package in Impish: Won't Fix Status in user-setup source package in Impish: Invalid Status in cloud-init source package in Jammy: Confirmed Status in ubiquity source package in Jammy: Invalid Status in ubuntu-settings source package in Jammy: Confirmed Status in user-setup source package in Jammy: Invalid Status in cloud-init source package in Kinetic: Won't Fix Status in ubiquity source package in Kinetic: Invalid Status in ubuntu-settings source package in Kinetic: Won't Fix Status in user-setup source package in Kinetic: Invalid Status in cloud-init source package in Lunar: Won't Fix Status in ubiquity source package in Lunar: Invalid Status in ubuntu-settings source package in Lunar: Won't Fix Status in user-setup source package in Lunar: Invalid Status in cloud-init source package in Mantic: Confirmed Status in ubiquity source package in Mantic: Invalid Status in ubuntu-settings source package in Mantic: Confirmed Status in user-setup source package in Mantic: Invalid Bug description: We're attempting to make the GPIO system on the Raspberry Pi images work "out of the box" on the new image. By default, GPIO kernel devices are made available to members of the "dialout" group which the initial user is added to by default on our server images. However, we've noticed that this isn't the case on the desktop images. The regression potential is minimal; the group already exists and we're simply adding the freshly created user to a new group and not removing any existing memberships. The group in question ("dialout") is also rarely used these days except for providing access to serial consoles, and as mentioned above is already a default membership on the server images. The change has been tested on the desktop image successfully. A test build of the updated image will be made under https://launchpad.net/~waveform/+archive/ubuntu/ubiquity and I'll attach a debdiff shortly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1923363/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1923363] Re: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules
Added PR for cloud-init to remove the default groups that were removed (ages ago) from the desktop image (excepting the lxd group which was added in a reasonably recent commit and so is presumably wanted): https://github.com/canonical/cloud-init/pull/4258 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1923363 Title: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules Status in cloud-init package in Ubuntu: Confirmed Status in ubiquity package in Ubuntu: Invalid Status in ubuntu-settings package in Ubuntu: Confirmed Status in user-setup package in Ubuntu: Invalid Status in cloud-init source package in Impish: Won't Fix Status in ubiquity source package in Impish: Invalid Status in ubuntu-settings source package in Impish: Won't Fix Status in user-setup source package in Impish: Invalid Status in cloud-init source package in Jammy: Confirmed Status in ubiquity source package in Jammy: Invalid Status in ubuntu-settings source package in Jammy: Confirmed Status in user-setup source package in Jammy: Invalid Status in cloud-init source package in Kinetic: Won't Fix Status in ubiquity source package in Kinetic: Invalid Status in ubuntu-settings source package in Kinetic: Won't Fix Status in user-setup source package in Kinetic: Invalid Status in cloud-init source package in Lunar: Won't Fix Status in ubiquity source package in Lunar: Invalid Status in ubuntu-settings source package in Lunar: Won't Fix Status in user-setup source package in Lunar: Invalid Status in cloud-init source package in Mantic: Confirmed Status in ubiquity source package in Mantic: Invalid Status in ubuntu-settings source package in Mantic: Confirmed Status in user-setup source package in Mantic: Invalid Bug description: We're attempting to make the GPIO system on the Raspberry Pi images work "out of the box" on the new image. By default, GPIO kernel devices are made available to members of the "dialout" group which the initial user is added to by default on our server images. However, we've noticed that this isn't the case on the desktop images. The regression potential is minimal; the group already exists and we're simply adding the freshly created user to a new group and not removing any existing memberships. The group in question ("dialout") is also rarely used these days except for providing access to serial consoles, and as mentioned above is already a default membership on the server images. The change has been tested on the desktop image successfully. A test build of the updated image will be made under https://launchpad.net/~waveform/+archive/ubuntu/ubiquity and I'll attach a debdiff shortly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1923363/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1923363] Re: Users are not added to various groups (dialout, video, etc.)
Per vorlon's comments on the merge request, I've closed the merge and will re-submit an alternative method using udev rules instead of group membership. Adding ubuntu-settings for the udev rules, and cloud-init as we presumably want to remove membership in those groups from server instances too. ** Tags added: foundations-todo ** Summary changed: - Users are not added to various groups (dialout, video, etc.) + Grant access to hardware (UARTs, I2C, etc.) via custom udev rules ** Also affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Also affects: cloud-init (Ubuntu) Importance: Undecided Status: New ** Changed in: cloud-init (Ubuntu Impish) Status: New => Won't Fix ** Changed in: cloud-init (Ubuntu Jammy) Status: New => Confirmed ** Changed in: cloud-init (Ubuntu Kinetic) Status: New => Won't Fix ** Changed in: cloud-init (Ubuntu Lunar) Status: New => Won't Fix ** Changed in: cloud-init (Ubuntu Mantic) Status: New => Confirmed ** Changed in: ubiquity (Ubuntu Impish) Status: Won't Fix => Invalid ** Changed in: ubiquity (Ubuntu Jammy) Status: Confirmed => Invalid ** Changed in: ubiquity (Ubuntu Kinetic) Status: Won't Fix => Invalid ** Changed in: ubiquity (Ubuntu Lunar) Status: Won't Fix => Invalid ** Changed in: ubiquity (Ubuntu Mantic) Status: Confirmed => Invalid ** Changed in: ubuntu-settings (Ubuntu Impish) Status: New => Won't Fix ** Changed in: ubuntu-settings (Ubuntu Jammy) Status: New => Confirmed ** Changed in: ubuntu-settings (Ubuntu Kinetic) Status: New => Won't Fix ** Changed in: ubuntu-settings (Ubuntu Lunar) Status: New => Won't Fix ** Changed in: ubuntu-settings (Ubuntu Mantic) Status: New => Confirmed ** Changed in: user-setup (Ubuntu Impish) Status: Won't Fix => Invalid ** Changed in: user-setup (Ubuntu Jammy) Status: Confirmed => Invalid ** Changed in: user-setup (Ubuntu Kinetic) Status: Won't Fix => Invalid ** Changed in: user-setup (Ubuntu Lunar) Status: Won't Fix => Invalid ** Changed in: user-setup (Ubuntu Mantic) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1923363 Title: Grant access to hardware (UARTs, I2C, etc.) via custom udev rules Status in cloud-init package in Ubuntu: Confirmed Status in ubiquity package in Ubuntu: Invalid Status in ubuntu-settings package in Ubuntu: Confirmed Status in user-setup package in Ubuntu: Invalid Status in cloud-init source package in Impish: Won't Fix Status in ubiquity source package in Impish: Invalid Status in ubuntu-settings source package in Impish: Won't Fix Status in user-setup source package in Impish: Invalid Status in cloud-init source package in Jammy: Confirmed Status in ubiquity source package in Jammy: Invalid Status in ubuntu-settings source package in Jammy: Confirmed Status in user-setup source package in Jammy: Invalid Status in cloud-init source package in Kinetic: Won't Fix Status in ubiquity source package in Kinetic: Invalid Status in ubuntu-settings source package in Kinetic: Won't Fix Status in user-setup source package in Kinetic: Invalid Status in cloud-init source package in Lunar: Won't Fix Status in ubiquity source package in Lunar: Invalid Status in ubuntu-settings source package in Lunar: Won't Fix Status in user-setup source package in Lunar: Invalid Status in cloud-init source package in Mantic: Confirmed Status in ubiquity source package in Mantic: Invalid Status in ubuntu-settings source package in Mantic: Confirmed Status in user-setup source package in Mantic: Invalid Bug description: We're attempting to make the GPIO system on the Raspberry Pi images work "out of the box" on the new image. By default, GPIO kernel devices are made available to members of the "dialout" group which the initial user is added to by default on our server images. However, we've noticed that this isn't the case on the desktop images. The regression potential is minimal; the group already exists and we're simply adding the freshly created user to a new group and not removing any existing memberships. The group in question ("dialout") is also rarely used these days except for providing access to serial consoles, and as mentioned above is already a default membership on the server images. The change has been tested on the desktop image successfully. A test build of the updated image will be made under https://launchpad.net/~waveform/+archive/ubuntu/ubiquity and I'll attach a debdiff shortly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1923363/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to :
[Touch-packages] [Bug 1939537] Re: Tests in ubuntu_lxc failed with "ERROR: Couldn't find a matching image." on X-hwe and older releases
Is there anything left to do on this bug? Any further series to target for lxc, and/or anything to do with the ubuntu-kernel-tests? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1939537 Title: Tests in ubuntu_lxc failed with "ERROR: Couldn't find a matching image." on X-hwe and older releases Status in ubuntu-kernel-tests: New Status in lxc package in Ubuntu: Confirmed Status in lxc source package in Bionic: Fix Released Bug description: [ Impact ] * The following tests fail as they try to use inexistent LXC images: * lxc-test-apparmor-mount * lxc-test-autostart * lxc-test-unpriv * lxc-test-usernic * Having them fixed for the affected series (for example, Bionic) will allow us to run the LXC test suite without maintaining local changes for these tests. [ Test Plan ] * Run the affected tests on an affected series (e.g. Bionic). * The tests should pass. [ Where problems could occur ] * The regression risk is very low and the changes only affect the tests so the regression scope is minimal. [Other info] Original bug report: Issue found on node onibi 4.15.0-142-generic #146~16.04.1 With bug 1916087 resolved, the following tests: * lxc-test-apparmor-mount * lxc-test-autostart * lxc-test-unpriv * lxc-test-usernic Are now failing with: ERROR: Couldn't find a matching image. This is because with lxc version 2.0.11-0ubuntu1~16.04.3 the default target release is "trusty" or the system release if supported. It will be checked with: ubuntu-distro-info --supported However Xenial is an ESM series now, it won't use xenial as the target release but use trusty instead. The attempt to download trusty image will fail with this error. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1939537/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020464] Re: Please merge lvm 2.03.16-2 from Debian unstable
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/lvm2/+git/lvm2/+merge/444199 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2020464 Title: Please merge lvm 2.03.16-2 from Debian unstable Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-2 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2020464/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020604] Re: After mesa upgrades, Chrome won't show graphics
As I have multiple profiles, I chose to simply delete all Cache directories $ find ~/.config/google-chrome \( -name "*Cache" \) | xargs -d '\n' -L 1 rm -rf -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2020604 Title: After mesa upgrades, Chrome won't show graphics Status in chromium-browser package in Ubuntu: Fix Committed Status in mesa package in Ubuntu: Triaged Bug description: After today's Ubuntu 22.04 mesa upgrades many of our users reported problems viewing graphics when using Google Chrome (Stable). The mesa upgrades we installed were: [UPGRADE] libegl-mesa0:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 [UPGRADE] libegl1-mesa:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 [UPGRADE] libgl1-mesa-dri:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 [UPGRADE] libgl1-mesa-glx:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 [UPGRADE] libglapi-mesa:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 [UPGRADE] libglx-mesa0:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 [UPGRADE] mesa-vulkan-drivers:amd64 22.2.5-0ubuntu0.1~22.04.1 -> 22.2.5-0ubuntu0.1~22.04.2 We documented the problem in AskUbuntu before we realized it was probably related to mesa, so wanted to link to that report here: https://askubuntu.com/questions/1469116/since-23-may-2023-ubuntu-22-04-mesa- updates-chrome-wont-display-website-graphi There are several useful pointers and bypasses listed in that AskUbuntu link (one being to remove affected users' GPUCache directories, which does not destroy their profiles and seems to work in many but not all cases). Not sure if this is an issue with mesa or Chrome or specific machine graphics or an interaction between them. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/2020604/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1971425] Re: The "look" cli dictionary only sees capitalized words
** Tags removed: regression-release rls-jj-incoming ** Tags added: foundations-todo -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1971425 Title: The "look" cli dictionary only sees capitalized words Status in util-linux package in Ubuntu: Confirmed Status in util-linux package in Debian: Unknown Bug description: In Ubuntu 20.04; ~ > look accident accident accident's accidental accidental's accidentally accidentals accidents In Ubuntu 22.04; ~ > look accident (nothing) ~ > look acc Accenture Accenture's Accra Accra's Digging deeper; the dictionary at /usr/share/dict/words seems OK. If I copy the "look" binary from Ubuntu 20.04 and use it on Ubuntu 22.04 it works; ~ > ./look accident accident accidental accidentally accidental's accidentals accident's accidents ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: bsdextrautils 2.37.2-4ubuntu3 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: XFCE Date: Tue May 3 14:19:57 2022 InstallationDate: Installed on 2018-09-07 (1334 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) SourcePackage: util-linux UpgradeStatus: Upgraded to jammy on 2022-05-01 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1971425/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2019940] Re: Directly manipulating NetworkManager keyfiles
** Tags removed: rls-mm-incoming ** Tags added: foundations-todo -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/2019940 Title: Directly manipulating NetworkManager keyfiles Status in augeas package in Ubuntu: New Status in calamares package in Ubuntu: New Status in cloud-init package in Ubuntu: Invalid Status in cruft package in Ubuntu: Won't Fix Status in cruft-ng package in Ubuntu: New Status in dracut package in Ubuntu: New Status in forensic-artifacts package in Ubuntu: New Status in guestfs-tools package in Ubuntu: New Status in guix package in Ubuntu: New Status in ltsp package in Ubuntu: Invalid Status in netcfg package in Ubuntu: Won't Fix Status in netplan.io package in Ubuntu: Invalid Status in network-manager package in Ubuntu: New Status in refpolicy package in Ubuntu: New Status in sosreport package in Ubuntu: Invalid Status in ubiquity package in Ubuntu: New Status in uhd package in Ubuntu: New Status in vagrant package in Ubuntu: New Bug description: The affected packages can manipulate NetworkManager keyfiles directly on disk, which might not be appropriate anymore on Ubuntu, since the Netplan integration was enabled in NetworkManager (starting with Mantic), migrating any keyfile configuration from /etc/NetworkManager/system-connections/*[.nmconnection] to /etc/netplan/90-NM-*.yaml See Netplan's documentation for how connections are handled: https://netplan.readthedocs.io/en/latest/netplan-everywhere/ PS: Packages were queried using: https://codesearch.debian.net/search?q=%2Fsystem-connections=1=1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/augeas/+bug/2019940/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020464] Re: Please merge lvm 2.03.16-2 from Debian unstable
Test packages built in ppa:waveform/lvm2 (https://launchpad.net/~waveform/+archive/ubuntu/lvm2) ** Tags added: fr-4283 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2020464 Title: Please merge lvm 2.03.16-2 from Debian unstable Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-2 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2020464/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020464] Re: Please merge lvm 2.03.16-2 from Debian unstable
Attaching patch against Debian unstable. For ease of review, relevant commits and tags have been pushed to the following repository: https://code.launchpad.net/~waveform/ubuntu/+source/lvm2/+git/lvm2 Specifically: * logical/2.03.16-1ubuntu1 represents our split-out delta on top of old/debian (2.03.16-1) * logical/2.03.16-2ubuntu1 represents our rebased delta on top of new/debian (2.03.16-2) * merge/2.03.16-2ubuntu1 adds changelog and maintainer changes on top of logical/2.03.16-2ubuntu1 Hence, the following command may produce output useful to the purposes of review: git range-diff --creation-factor=100 old/debian..logical/2.03.16-1ubuntu1 new/debian..logical/2.03.16-2ubuntu1 ** Patch added: "1-2020464.debdiff" https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2020464/+attachment/5674963/+files/1-2020464.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2020464 Title: Please merge lvm 2.03.16-2 from Debian unstable Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-2 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2020464/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020464] [NEW] Please merge lvm 2.03.16-2 from Debian unstable
Public bug reported: Please merge lvm2 2.03.16-2 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. ** Affects: lvm2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/2020464 Title: Please merge lvm 2.03.16-2 from Debian unstable Status in lvm2 package in Ubuntu: New Bug description: Please merge lvm2 2.03.16-2 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/2020464/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020110] Re: Migrate netplan settings to this package
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/443210 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2020110 Title: Migrate netplan settings to this package Status in ubuntu-settings package in Ubuntu: New Bug description: The current netplan configuration that specifies Network Manager as the renderer comes from a livecd-rootfs hack and results in an "unowned" file in /etc/netplan/01-use-network-manager.yaml. It was decided at the engineering sprint to migrate this to /lib/netplan (with a slightly tweaked filename starting 00- for precedence) owned by ubuntu-settings which will ease maintenance (and image builds) in future. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2020110/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020110] Re: Migrate netplan settings to this package
Test package building in ppa:waveform/ubuntu-settings for mantic (https://launchpad.net/~waveform/+archive/ubuntu/ubuntu-settings) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2020110 Title: Migrate netplan settings to this package Status in ubuntu-settings package in Ubuntu: New Bug description: The current netplan configuration that specifies Network Manager as the renderer comes from a livecd-rootfs hack and results in an "unowned" file in /etc/netplan/01-use-network-manager.yaml. It was decided at the engineering sprint to migrate this to /lib/netplan (with a slightly tweaked filename starting 00- for precedence) owned by ubuntu-settings which will ease maintenance (and image builds) in future. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2020110/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2020110] [NEW] Migrate netplan settings to this package
Public bug reported: The current netplan configuration that specifies Network Manager as the renderer comes from a livecd-rootfs hack and results in an "unowned" file in /etc/netplan/01-use-network-manager.yaml. It was decided at the engineering sprint to migrate this to /lib/netplan (with a slightly tweaked filename starting 00- for precedence) owned by ubuntu-settings which will ease maintenance (and image builds) in future. ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2020110 Title: Migrate netplan settings to this package Status in ubuntu-settings package in Ubuntu: New Bug description: The current netplan configuration that specifies Network Manager as the renderer comes from a livecd-rootfs hack and results in an "unowned" file in /etc/netplan/01-use-network-manager.yaml. It was decided at the engineering sprint to migrate this to /lib/netplan (with a slightly tweaked filename starting 00- for precedence) owned by ubuntu-settings which will ease maintenance (and image builds) in future. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2020110/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2015778] Re: conffile prompt during release upgrade
@enr0n ah, that makes sense (and apologies to @zhsj; I suspect I misinterpreted comment 2!) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/2015778 Title: conffile prompt during release upgrade Status in binutils package in Ubuntu: Triaged Status in binutils source package in Lunar: Triaged Bug description: I was upgrading from Kinetic to Lunar today and received a question about a configuration file I had not touched. Setting up binutils-common:amd64 (2.40-2ubuntu3) ...^M ^M Configuration file '/etc/gprofng.rc'^M ==> File on system created by you or by a script.^M ==> File also in package provided by package maintainer.^M What would you like to do about it ? Your options are:^M Y or I : install the package maintainer's version^M N or O : keep your currently-installed version^M D : show the differences between the versions^M Z : start a shell to examine the situation^M The default action is to keep your current version.^M *** gprofng.rc (Y/I/N/O/D/Z) [default=N] ? d^M ^[[?1h^[=^M--- /etc/gprofng.rc 2022-12-01 03:11:36.0 -0800^[[m^M +++ /etc/gprofng.rc.dpkg-new2023-03-05 00:47:46.0 -0800^[[m^M @@ -1,4 +1,4 @@^[[m^M -# Copyright (C) 2021 Free Software Foundation, Inc.^[[m^M +# Copyright (C) 2021-2023 Free Software Foundation, Inc.^[[m^M #^[[m^M # This file is free software; you can redistribute it and/or modify^[[m^M # it under the terms of the GNU General Public License as published by^[[m^M ^M^[[K^[[?1l^[>^M Configuration file '/etc/gprofng.rc'^M ==> File on system created by you or by a script.^M ==> File also in package provided by package maintainer.^M What would you like to do about it ? Your options are:^M Y or I : install the package maintainer's version^M N or O : keep your currently-installed version^M D : show the differences between the versions^M Z : start a shell to examine the situation^M The default action is to keep your current version.^M *** gprofng.rc (Y/I/N/O/D/Z) [default=N] ? i^M Installing new version of config file /etc/gprofng.rc ...^M To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/2015778/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2016285] Re: Redundant creation of oem user in rpi desktop images
Setting to critical as this currently prevents the creation of the ubuntu rpi desktop images. ** Changed in: livecd-rootfs (Ubuntu) Importance: Undecided => Critical ** Changed in: ubuntu-settings (Ubuntu) Importance: Undecided => Critical -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2016285 Title: Redundant creation of oem user in rpi desktop images Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: There are two (semi-related) issues which are currently preventing the creation of Ubuntu desktop images for the Raspberry Pi: The first is that livecd-rootfs is erroneously trying to create the oem user (and run oem-config-prepare) twice in live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot. The second is that the ubuntu-raspi-settings-desktop package is attempt to create the oem user and run oem-config-prepare in its postinst. This is the wrong place to accomplish this as there's no guarantee that oem-config-prepare is installed at the time that ubuntu-raspi-settings-desktop is installed. It cannot be a dependency because oem-config is uninstalled after first boot. It's likely that the *correct* place to do this configuration is in neither of these places, but in oem-config's postinst (along with some check that it's being installed in an image that's never been booted, e.g. check for the existence of some sentinel created on first boot ... maybe /var/log/boot.log or something). Still, that fix can wait until it's not release week! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2016285/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2016286] [NEW] growroot-almost service failure after upgrade
Public bug reported: Users upgrading Ubuntu desktop for Raspberry Pi from kinetic to lunar may notice that the new growroot-almost.service persistently fails as the root is already resized. The unit should be updated to fail silently and prevent future runs. ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/441072 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2016286 Title: growroot-almost service failure after upgrade Status in ubuntu-settings package in Ubuntu: New Bug description: Users upgrading Ubuntu desktop for Raspberry Pi from kinetic to lunar may notice that the new growroot-almost.service persistently fails as the root is already resized. The unit should be updated to fail silently and prevent future runs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2016286/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2016285] Re: Redundant creation of oem user in rpi desktop images
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/441072 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2016285 Title: Redundant creation of oem user in rpi desktop images Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: There are two (semi-related) issues which are currently preventing the creation of Ubuntu desktop images for the Raspberry Pi: The first is that livecd-rootfs is erroneously trying to create the oem user (and run oem-config-prepare) twice in live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot. The second is that the ubuntu-raspi-settings-desktop package is attempt to create the oem user and run oem-config-prepare in its postinst. This is the wrong place to accomplish this as there's no guarantee that oem-config-prepare is installed at the time that ubuntu-raspi-settings-desktop is installed. It cannot be a dependency because oem-config is uninstalled after first boot. It's likely that the *correct* place to do this configuration is in neither of these places, but in oem-config's postinst (along with some check that it's being installed in an image that's never been booted, e.g. check for the existence of some sentinel created on first boot ... maybe /var/log/boot.log or something). Still, that fix can wait until it's not release week! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2016285/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2016285] [NEW] Redundant creation of oem user in rpi desktop images
Public bug reported: There are two (semi-related) issues which are currently preventing the creation of Ubuntu desktop images for the Raspberry Pi: The first is that livecd-rootfs is erroneously trying to create the oem user (and run oem-config-prepare) twice in live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot. The second is that the ubuntu-raspi-settings-desktop package is attempt to create the oem user and run oem-config-prepare in its postinst. This is the wrong place to accomplish this as there's no guarantee that oem- config-prepare is installed at the time that ubuntu-raspi-settings- desktop is installed. It cannot be a dependency because oem-config is uninstalled after first boot. It's likely that the *correct* place to do this configuration is in neither of these places, but in oem-config's postinst (along with some check that it's being installed in an image that's never been booted, e.g. check for the existence of some sentinel created on first boot ... maybe /var/log/boot.log or something). Still, that fix can wait until it's not release week! ** Affects: livecd-rootfs (Ubuntu) Importance: Undecided Status: New ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Also affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Changed in: livecd-rootfs (Ubuntu) Milestone: None => ubuntu-23.04 ** Changed in: ubuntu-settings (Ubuntu) Milestone: None => ubuntu-23.04 ** Merge proposal linked: https://code.launchpad.net/~waveform/livecd-rootfs/+git/livecd-rootfs/+merge/441071 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2016285 Title: Redundant creation of oem user in rpi desktop images Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: There are two (semi-related) issues which are currently preventing the creation of Ubuntu desktop images for the Raspberry Pi: The first is that livecd-rootfs is erroneously trying to create the oem user (and run oem-config-prepare) twice in live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot. The second is that the ubuntu-raspi-settings-desktop package is attempt to create the oem user and run oem-config-prepare in its postinst. This is the wrong place to accomplish this as there's no guarantee that oem-config-prepare is installed at the time that ubuntu-raspi-settings-desktop is installed. It cannot be a dependency because oem-config is uninstalled after first boot. It's likely that the *correct* place to do this configuration is in neither of these places, but in oem-config's postinst (along with some check that it's being installed in an image that's never been booted, e.g. check for the existence of some sentinel created on first boot ... maybe /var/log/boot.log or something). Still, that fix can wait until it's not release week! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2016285/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2004430] Re: Migrate raspberry pi image hacks from livecd-rootfs
Fix-released in livecd-rootfs 2.818 ** Changed in: livecd-rootfs (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2004430 Title: Migrate raspberry pi image hacks from livecd-rootfs Status in livecd-rootfs package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Fix Released Bug description: There are currently several "hacks" in livecd-rootfs that introduce unpackaged files and/or services. In particular, everything in https://git.launchpad.net/ubuntu/+source/livecd-rootfs/tree/live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot dealing with the fstab and the swapfile needs to go. The new ubuntu-image based process for generating images won't be using these; anything to do with the fstab needs to go in the image-definition yaml, and the swapfile services ought to be owned by the ubuntu-raspi-settings- desktop package anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2004430/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2013080] Re: On rpi desktop images, grow root leaving slack for LUKS
This was fixed-released in livecd-rootfs 2.818 ** Changed in: livecd-rootfs (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2013080 Title: On rpi desktop images, grow root leaving slack for LUKS Status in livecd-rootfs package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Fix Released Bug description: To aid in user-implemented FDE we wish to leave 16MB of the file- system unexpanded during first boot. The growth of the partition is unaffected, but rather than relying on systemd's growfs facility in fstab, we should use a service that runs a simple script to handle calculating the resize in early boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2013080/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1951586] Re: Need option to specify wifi regulatory domain
netplan added support for configuring the regulatory domain in kinetic and it works pretty nicely (it's one of the things I test before release). However, that's relying on cloud-init to inject the netplan configuration and that's only on the server images -- it's not a solution for the preinstalled desktop images. Having said that ... it might be if cloud-init gets included in the preinstalled desktop images, but that's not happening in lunar as it caused other issues. Still, even if it did that's still a rather command-line / text-configuration-file interface that's nowhere near as "good" as having it integrated into the first time GUI setup (as RaspiOS does). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1951586 Title: Need option to specify wifi regulatory domain Status in cloud-init: Invalid Status in netplan: Fix Released Status in NetworkManager: New Status in netplan.io package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Incomplete Status in netplan.io source package in Jammy: Triaged Status in network-manager source package in Jammy: Incomplete Status in netplan.io source package in Kinetic: Fix Released Status in network-manager source package in Kinetic: Incomplete Bug description: It would be nice if netplan offered an option to specify the wifi regulatory domain (country code). For devices such as the Raspberry Pi you are currently advertising that users can simply setup Ubuntu Server headless by putting the wifi configuration details in cloudinit/netplan's "network-config" on the FAT partition of the SD card: https://ubuntu.com/tutorials/how-to-install-ubuntu-on-your-raspberry-pi#3-wifi-or-ethernet But an option to set the wifi country code there does not seem to exist, so may not work. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1951586/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2015778] Re: conffile prompt during release upgrade
Just ran into this on a test upgrade of the raspi desktop image. The card was originally flashed with kinetic and I noted /etc/gprofng.rc was *not* present initially (@zhsj is correct this doesn't *ship* with kinetic), but appeared after the initial upgrade required before do- release-upgrade (in other words /etc/gprofng.rc is introduced by the version of binutils-common in kinetic-updates). The /etc/gprofng.rc file was unmodified before proceeding to do-release- upgrade, yet I was prompted to merge changes during the upgrade (which was otherwise uneventful), despite there being no local changes to the file, and the only diff being that shown in the description above (a change in the copyright notice in the header). Some issue in the configuration merge mechanism, perhaps? Or maybe something iffy being done to the config file in the binutils-common maintscripts (if any)? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/2015778 Title: conffile prompt during release upgrade Status in binutils package in Ubuntu: New Status in binutils source package in Lunar: New Bug description: I was upgrading from Kinetic to Lunar today and received a question about a configuration file I had not touched. Setting up binutils-common:amd64 (2.40-2ubuntu3) ...^M ^M Configuration file '/etc/gprofng.rc'^M ==> File on system created by you or by a script.^M ==> File also in package provided by package maintainer.^M What would you like to do about it ? Your options are:^M Y or I : install the package maintainer's version^M N or O : keep your currently-installed version^M D : show the differences between the versions^M Z : start a shell to examine the situation^M The default action is to keep your current version.^M *** gprofng.rc (Y/I/N/O/D/Z) [default=N] ? d^M ^[[?1h^[=^M--- /etc/gprofng.rc 2022-12-01 03:11:36.0 -0800^[[m^M +++ /etc/gprofng.rc.dpkg-new2023-03-05 00:47:46.0 -0800^[[m^M @@ -1,4 +1,4 @@^[[m^M -# Copyright (C) 2021 Free Software Foundation, Inc.^[[m^M +# Copyright (C) 2021-2023 Free Software Foundation, Inc.^[[m^M #^[[m^M # This file is free software; you can redistribute it and/or modify^[[m^M # it under the terms of the GNU General Public License as published by^[[m^M ^M^[[K^[[?1l^[>^M Configuration file '/etc/gprofng.rc'^M ==> File on system created by you or by a script.^M ==> File also in package provided by package maintainer.^M What would you like to do about it ? Your options are:^M Y or I : install the package maintainer's version^M N or O : keep your currently-installed version^M D : show the differences between the versions^M Z : start a shell to examine the situation^M The default action is to keep your current version.^M *** gprofng.rc (Y/I/N/O/D/Z) [default=N] ? i^M Installing new version of config file /etc/gprofng.rc ...^M To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/2015778/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1951586] Re: Need option to specify wifi regulatory domain
Given there doesn't seem much interest in fixing this from the network manager angle (and there's even a question as to whether that's the right place to fix this), I'm going to take a leaf out of the RaspiOS book, and see if I can persuade someone that the installer is the right place to fix this (or more specifically, the new installer, subiquity). That's not going to do anything for lunar which won't be using subiquity on the raspi images, so I'll hold off on adding the project to the "affected" list until lunar's out, but it should be something I can try and push for in the m-animal cycle. @jgneff many thanks for the additional report -- it's extremely useful to have stuff like this I can point to and say "look! It's actually a problem!" -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1951586 Title: Need option to specify wifi regulatory domain Status in cloud-init: Invalid Status in netplan: Fix Released Status in NetworkManager: New Status in netplan.io package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Incomplete Status in netplan.io source package in Jammy: Triaged Status in network-manager source package in Jammy: Incomplete Status in netplan.io source package in Kinetic: Fix Released Status in network-manager source package in Kinetic: Incomplete Bug description: It would be nice if netplan offered an option to specify the wifi regulatory domain (country code). For devices such as the Raspberry Pi you are currently advertising that users can simply setup Ubuntu Server headless by putting the wifi configuration details in cloudinit/netplan's "network-config" on the FAT partition of the SD card: https://ubuntu.com/tutorials/how-to-install-ubuntu-on-your-raspberry-pi#3-wifi-or-ethernet But an option to set the wifi country code there does not seem to exist, so may not work. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1951586/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2013080] Re: On rpi desktop images, grow root leaving slack for LUKS
** Also affects: livecd-rootfs (Ubuntu) Importance: Undecided Status: New ** Changed in: livecd-rootfs (Ubuntu) Milestone: None => ubuntu-23.04 ** Changed in: livecd-rootfs (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2013080 Title: On rpi desktop images, grow root leaving slack for LUKS Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: To aid in user-implemented FDE we wish to leave 16MB of the file- system unexpanded during first boot. The growth of the partition is unaffected, but rather than relying on systemd's growfs facility in fstab, we should use a service that runs a simple script to handle calculating the resize in early boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2013080/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2013080] Re: On rpi desktop images, grow root leaving slack for LUKS
This should only be merged once LP: #2004430 as it builds upon those commits. ** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/439835 ** Merge proposal linked: https://code.launchpad.net/~waveform/livecd-rootfs/+git/livecd-rootfs/+merge/439842 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2013080 Title: On rpi desktop images, grow root leaving slack for LUKS Status in ubuntu-settings package in Ubuntu: New Bug description: To aid in user-implemented FDE we wish to leave 16MB of the file- system unexpanded during first boot. The growth of the partition is unaffected, but rather than relying on systemd's growfs facility in fstab, we should use a service that runs a simple script to handle calculating the resize in early boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2013080/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2013080] [NEW] On rpi desktop images, grow root leaving slack for LUKS
Public bug reported: To aid in user-implemented FDE we wish to leave 16MB of the file-system unexpanded during first boot. The growth of the partition is unaffected, but rather than relying on systemd's growfs facility in fstab, we should use a service that runs a simple script to handle calculating the resize in early boot. ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Assignee: Dave Jones (waveform) Status: New ** Changed in: ubuntu-settings (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) ** Changed in: ubuntu-settings (Ubuntu) Milestone: None => ubuntu-23.04 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2013080 Title: On rpi desktop images, grow root leaving slack for LUKS Status in ubuntu-settings package in Ubuntu: New Bug description: To aid in user-implemented FDE we wish to leave 16MB of the file- system unexpanded during first boot. The growth of the partition is unaffected, but rather than relying on systemd's growfs facility in fstab, we should use a service that runs a simple script to handle calculating the resize in early boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/2013080/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2001568] Re: unattended-upgrades 2.9.1+nmu2ubuntu1 failing autopkgtest on arm64
It looks like Debian independently fixed the running_escape_regexp line in January (in 2.9.1+nmu3 [1]). The d/t/control fix isn't *strictly* necessary to fix this and is more a matter of fixing semantics -- but I'll try and forward that change if I can figure out where to submit a PR (doesn't appear u-u is in salsa, and the GH Vcs-Git repo is way behind where it's meant to be). [1]: https://tracker.debian.org/news/1405664/accepted-unattended- upgrades-291nmu3-source-into-unstable/ ** Changed in: unattended-upgrades (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unattended-upgrades in Ubuntu. https://bugs.launchpad.net/bugs/2001568 Title: unattended-upgrades 2.9.1+nmu2ubuntu1 failing autopkgtest on arm64 Status in unattended-upgrades package in Ubuntu: Fix Released Bug description: u-u is currently failing autopkgtest on arm64. It does not look like this is a new failure (2.8ubuntu1 appears to have had exactly the same failure) but it's due to the kernel-patterns test assuming that kernel flavors cannot be a suffix of each other. This is true under Debian, and under several architectures on Ubuntu, but the arm64 architecture on Ubuntu has -generic and -generic-64k flavors which cause the test to fail. The attached debdiff corrects the test for this case. One may wonder why the test currently passes under armhf, which has -generic and -generic-lpae flavors (I certainly did!). It turns out this is only because Ubuntu autopkgtest runs armhf in a container so the kernel release reported by "uname -r" (used in the test) does not meaningfully match anything in the apt cache. Given this, the attached debdiff also restricts the kernel-patterns test to isolation-machine as the test assumes a meaningful link between the running kernel and the packages in the archive which is only true in a VM or on the bare metal. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/2001568/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2006669] Re: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915])
Looking at mesa git staging/23.0 it looks like 78a75e0d2 and 4c986c58b may also be required. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2006669 Title: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915]) Status in mesa package in Ubuntu: New Status in mesa source package in Jammy: New Status in mesa source package in Kinetic: New Status in mesa source package in Lunar: New Bug description: GUI hard lock during zoom session and gnome-terminal kern.log shows a mix of errors __ kernel: [ 3627.948545] Asynchronous wait on fence :00:02.0:gnome-shell[4236]:40810 timed out (hint:intel_atomic_commit_ready [i915]) kernel: [ 3631.063832] i915 :00:02.0: [drm] GPU HANG: ecode 12:1:85db, in chrome [5521] kernel: [ 3631.064218] i915 :00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 kernel: [ 3631.165642] i915 :00:02.0: [drm] chrome[5521] context reset due to GPU hang kernel: [ 3631.165719] i915 :00:02.0: [drm] GuC firmware i915/adlp_guc_70.1.1.bin version 70.1 kernel: [ 3631.165725] i915 :00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9 kernel: [ 3631.187377] i915 :00:02.0: [drm] HuC authenticated kernel: [ 3631.187670] i915 :00:02.0: [drm] GuC submission enabled kernel: [ 3631.187672] i915 :00:02.0: [drm] GuC SLPC enabled ___ I suspect this issue to be upstream: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7755 upstream commit: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20169/commits?commit_id=b9403b1c477e7af04114ae6a4e16ca370e22253c#d6ffde011ad32c6371611e7d64affaeb21b6b217 Reproducer: Although I don't have my own reproducer, the upstream mesa reproducer does trigger a hang on my machine. Upstream Reproducer: Open https://kartikmandhang.netlify.app/ when it loads, you will see pikachu. Press "S", he will go back. My whole system freezes from this in Wayland, regardless of the browser. Kernel: 6.0.0-1008-oem Mesa: 22.2.5-0ubuntu0.1~22.04.1 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1008.8-oem 6.0.9 Uname: Linux 6.0.0-1008-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Feb 8 21:40:19 2023 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Alder Lake-P Integrated Graphics Controller [8086:46a6] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0b1a] Subsystem: Dell Device [1028:0b1a] InstallationDate: Installed on 2022-07-13 (211 days ago) InstallationMedia: Ubuntu-Server 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220421) MachineType: Dell Inc. Precision 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-6.0.0-1008-oem root=/dev/mapper/ubuntu--vg-ubuntu--lv ro pcie_aspm=force quiet splash mem_sleep_default=deep vt.handoff=7 SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2022 dmi.bios.release: 1.9 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.9.1 dmi.board.name: 03M8N5 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.9.1:bd11/21/2022:br1.9:svnDellInc.:pnPrecision5570:pvr:rvnDellInc.:rn03M8N5:rvrA00:cvnDellInc.:ct10:cvr:sku0B1A: dmi.product.family: Precision dmi.product.name: Precision 5570 dmi.product.sku: 0B1A dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.113-2~ubuntu0.22.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.2.5-0ubuntu0.1~22.04.1 version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/2006669/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to :
[Touch-packages] [Bug 2006669] Re: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915])
The above referenced commits are committed into mesa 23.0.0. I see references to backports of this onto stable, but I'm not familiar enough with mesa as a project just yet. ** Also affects: mesa (Ubuntu Lunar) Importance: Undecided Assignee: Dave Chiluk (chiluk) Status: New ** Also affects: mesa (Ubuntu Jammy) Importance: Undecided Status: New ** Also affects: mesa (Ubuntu Kinetic) Importance: Undecided Status: New ** Changed in: mesa (Ubuntu Jammy) Assignee: (unassigned) => Dave Chiluk (chiluk) ** Changed in: mesa (Ubuntu Lunar) Assignee: Dave Chiluk (chiluk) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2006669 Title: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915]) Status in mesa package in Ubuntu: New Status in mesa source package in Jammy: New Status in mesa source package in Kinetic: New Status in mesa source package in Lunar: New Bug description: GUI hard lock during zoom session and gnome-terminal kern.log shows a mix of errors __ kernel: [ 3627.948545] Asynchronous wait on fence :00:02.0:gnome-shell[4236]:40810 timed out (hint:intel_atomic_commit_ready [i915]) kernel: [ 3631.063832] i915 :00:02.0: [drm] GPU HANG: ecode 12:1:85db, in chrome [5521] kernel: [ 3631.064218] i915 :00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 kernel: [ 3631.165642] i915 :00:02.0: [drm] chrome[5521] context reset due to GPU hang kernel: [ 3631.165719] i915 :00:02.0: [drm] GuC firmware i915/adlp_guc_70.1.1.bin version 70.1 kernel: [ 3631.165725] i915 :00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9 kernel: [ 3631.187377] i915 :00:02.0: [drm] HuC authenticated kernel: [ 3631.187670] i915 :00:02.0: [drm] GuC submission enabled kernel: [ 3631.187672] i915 :00:02.0: [drm] GuC SLPC enabled ___ I suspect this issue to be upstream: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7755 upstream commit: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20169/commits?commit_id=b9403b1c477e7af04114ae6a4e16ca370e22253c#d6ffde011ad32c6371611e7d64affaeb21b6b217 Reproducer: Although I don't have my own reproducer, the upstream mesa reproducer does trigger a hang on my machine. Upstream Reproducer: Open https://kartikmandhang.netlify.app/ when it loads, you will see pikachu. Press "S", he will go back. My whole system freezes from this in Wayland, regardless of the browser. Kernel: 6.0.0-1008-oem Mesa: 22.2.5-0ubuntu0.1~22.04.1 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1008.8-oem 6.0.9 Uname: Linux 6.0.0-1008-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Feb 8 21:40:19 2023 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Alder Lake-P Integrated Graphics Controller [8086:46a6] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0b1a] Subsystem: Dell Device [1028:0b1a] InstallationDate: Installed on 2022-07-13 (211 days ago) InstallationMedia: Ubuntu-Server 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220421) MachineType: Dell Inc. Precision 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-6.0.0-1008-oem root=/dev/mapper/ubuntu--vg-ubuntu--lv ro pcie_aspm=force quiet splash mem_sleep_default=deep vt.handoff=7 SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2022 dmi.bios.release: 1.9 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.9.1 dmi.board.name: 03M8N5 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.9.1:bd11/21/2022:br1.9:svnDellInc.:pnPrecision5570:pvr:rvnDellInc.:rn03M8N5:rvrA00:cvnDellInc.:ct10:cvr:sku0B1A: dmi.product.family: Precision dmi.product.name: Precision 5570 dmi.product.sku: 0B1A dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.113-2~ubuntu0.22.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.2.5-0ubuntu0.1~22.04.1 version.xserver-xorg-core:
[Touch-packages] [Bug 2006669] Re: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915])
** Tags added: indeed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2006669 Title: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915]) Status in mesa package in Ubuntu: New Bug description: GUI hard lock during zoom session and gnome-terminal kern.log shows a mix of errors __ kernel: [ 3627.948545] Asynchronous wait on fence :00:02.0:gnome-shell[4236]:40810 timed out (hint:intel_atomic_commit_ready [i915]) kernel: [ 3631.063832] i915 :00:02.0: [drm] GPU HANG: ecode 12:1:85db, in chrome [5521] kernel: [ 3631.064218] i915 :00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 kernel: [ 3631.165642] i915 :00:02.0: [drm] chrome[5521] context reset due to GPU hang kernel: [ 3631.165719] i915 :00:02.0: [drm] GuC firmware i915/adlp_guc_70.1.1.bin version 70.1 kernel: [ 3631.165725] i915 :00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9 kernel: [ 3631.187377] i915 :00:02.0: [drm] HuC authenticated kernel: [ 3631.187670] i915 :00:02.0: [drm] GuC submission enabled kernel: [ 3631.187672] i915 :00:02.0: [drm] GuC SLPC enabled ___ I suspect this issue to be upstream: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7755 upstream commit: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20169/commits?commit_id=b9403b1c477e7af04114ae6a4e16ca370e22253c#d6ffde011ad32c6371611e7d64affaeb21b6b217 Reproducer: Although I don't have my own reproducer, the upstream mesa reproducer does trigger a hang on my machine. Upstream Reproducer: Open https://kartikmandhang.netlify.app/ when it loads, you will see pikachu. Press "S", he will go back. My whole system freezes from this in Wayland, regardless of the browser. Kernel: 6.0.0-1008-oem Mesa: 22.2.5-0ubuntu0.1~22.04.1 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1008.8-oem 6.0.9 Uname: Linux 6.0.0-1008-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Feb 8 21:40:19 2023 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Alder Lake-P Integrated Graphics Controller [8086:46a6] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0b1a] Subsystem: Dell Device [1028:0b1a] InstallationDate: Installed on 2022-07-13 (211 days ago) InstallationMedia: Ubuntu-Server 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220421) MachineType: Dell Inc. Precision 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-6.0.0-1008-oem root=/dev/mapper/ubuntu--vg-ubuntu--lv ro pcie_aspm=force quiet splash mem_sleep_default=deep vt.handoff=7 SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2022 dmi.bios.release: 1.9 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.9.1 dmi.board.name: 03M8N5 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.9.1:bd11/21/2022:br1.9:svnDellInc.:pnPrecision5570:pvr:rvnDellInc.:rn03M8N5:rvrA00:cvnDellInc.:ct10:cvr:sku0B1A: dmi.product.family: Precision dmi.product.name: Precision 5570 dmi.product.sku: 0B1A dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.113-2~ubuntu0.22.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.2.5-0ubuntu0.1~22.04.1 version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/2006669/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2006669] [NEW] Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915])
Public bug reported: GUI hard lock during zoom session and gnome-terminal kern.log shows a mix of errors __ kernel: [ 3627.948545] Asynchronous wait on fence :00:02.0:gnome-shell[4236]:40810 timed out (hint:intel_atomic_commit_ready [i915]) kernel: [ 3631.063832] i915 :00:02.0: [drm] GPU HANG: ecode 12:1:85db, in chrome [5521] kernel: [ 3631.064218] i915 :00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 kernel: [ 3631.165642] i915 :00:02.0: [drm] chrome[5521] context reset due to GPU hang kernel: [ 3631.165719] i915 :00:02.0: [drm] GuC firmware i915/adlp_guc_70.1.1.bin version 70.1 kernel: [ 3631.165725] i915 :00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9 kernel: [ 3631.187377] i915 :00:02.0: [drm] HuC authenticated kernel: [ 3631.187670] i915 :00:02.0: [drm] GuC submission enabled kernel: [ 3631.187672] i915 :00:02.0: [drm] GuC SLPC enabled ___ I suspect this issue to be upstream: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7755 upstream commit: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20169/commits?commit_id=b9403b1c477e7af04114ae6a4e16ca370e22253c#d6ffde011ad32c6371611e7d64affaeb21b6b217 Reproducer: Although I don't have my own reproducer, the upstream mesa reproducer does trigger a hang on my machine. Upstream Reproducer: Open https://kartikmandhang.netlify.app/ when it loads, you will see pikachu. Press "S", he will go back. My whole system freezes from this in Wayland, regardless of the browser. Kernel: 6.0.0-1008-oem Mesa: 22.2.5-0ubuntu0.1~22.04.1 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1008.8-oem 6.0.9 Uname: Linux 6.0.0-1008-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Feb 8 21:40:19 2023 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Alder Lake-P Integrated Graphics Controller [8086:46a6] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0b1a] Subsystem: Dell Device [1028:0b1a] InstallationDate: Installed on 2022-07-13 (211 days ago) InstallationMedia: Ubuntu-Server 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220421) MachineType: Dell Inc. Precision 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-6.0.0-1008-oem root=/dev/mapper/ubuntu--vg-ubuntu--lv ro pcie_aspm=force quiet splash mem_sleep_default=deep vt.handoff=7 SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2022 dmi.bios.release: 1.9 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.9.1 dmi.board.name: 03M8N5 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.9.1:bd11/21/2022:br1.9:svnDellInc.:pnPrecision5570:pvr:rvnDellInc.:rn03M8N5:rvrA00:cvnDellInc.:ct10:cvr:sku0B1A: dmi.product.family: Precision dmi.product.name: Precision 5570 dmi.product.sku: 0B1A dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.113-2~ubuntu0.22.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.2.5-0ubuntu0.1~22.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.2.5-0ubuntu0.1~22.04.1 version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: mesa (Ubuntu) Importance: Undecided Assignee: Dave Chiluk (chiluk) Status: New ** Tags: amd64 apport-bug jammy ubuntu uec-images wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2006669 Title: Asynchronous wait on fence ... timed out (hint:intel_atomic_commit_ready [i915]) Status in mesa package in Ubuntu: New Bug description: GUI hard lock during zoom session and gnome-terminal kern.log shows a mix of errors __ kernel: [ 3627.948545] Asynchronous wait on fence :00:02.0:gnome-shell[4236]:40810 timed out (hint:intel_atomic_commit_ready [i915]) kernel: [ 3631.063832] i915 :00:02.0: [drm] GPU HANG: ecode 12:1:85db, in ch
[Touch-packages] [Bug 1211700] Re: [gallium] EGL clients using a gallium driver (radeon, nouveau, freedreno) that saturate the GPU cause the Mir server to slow, freeze and stutter, displaying very few
Closing this ticket where I can as there's no update for 5 years. Plus mir has been supplanted by wayland. ** Changed in: mesa (Ubuntu) Status: New => Won't Fix ** Changed in: mir (Ubuntu) Status: Triaged => Won't Fix ** Changed in: mir Status: Triaged => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1211700 Title: [gallium] EGL clients using a gallium driver (radeon, nouveau, freedreno) that saturate the GPU cause the Mir server to slow, freeze and stutter, displaying very few frames Status in Mir: Fix Released Status in mesa package in Ubuntu: Won't Fix Status in mir package in Ubuntu: Won't Fix Bug description: GPU-heavy clients on Mesa gallium drivers (e.g. radeon, nouveau and freedreno) cause the Mir server to slow, sometimes to a halt. This is seen as a frozen screen, unable to move surfaces, or unable to switch VTs (for a while). For example: mir_demo_client_egltriangle -n mir_demo_client_eglplasma -n The -n flag (swapinterval = 0) seems to cause the client to overload the mir server to the point where it cannot render physical frames very often. $ es2_info EGL_VERSION = 1.4 (Gallium) EGL_VENDOR = Mesa Project EGL_EXTENSIONS = EGL_WL_bind_wayland_display EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_KHR_surfaceless_context EGL_NOK_swap_region EGL_NV_post_sub_buffer EGL_CLIENT_APIS = OpenGL OpenGL_ES OpenGL_ES2 OpenVG GL_VERSION: OpenGL ES 3.0 Mesa 9.2.0-devel GL_RENDERER: Gallium 0.4 on AMD CEDAR ... $ es2_info EGL_VERSION = 1.4 (Gallium) EGL_VENDOR = Mesa Project EGL_EXTENSIONS = EGL_WL_bind_wayland_display EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_KHR_surfaceless_context EGL_NOK_swap_region EGL_NV_post_sub_buffer EGL_CLIENT_APIS = OpenGL OpenGL_ES OpenGL_ES2 OpenVG GL_VERSION: OpenGL ES 3.0 Mesa 9.2.0-devel GL_RENDERER: Gallium 0.4 on NVA8 ... To manage notifications about this bug go to: https://bugs.launchpad.net/mir/+bug/1211700/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2004430] Re: Migrate raspberry pi image hacks from livecd-rootfs
** Changed in: livecd-rootfs (Ubuntu) Milestone: None => ubuntu-23.04 ** Changed in: ubuntu-settings (Ubuntu) Milestone: None => ubuntu-23.04 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2004430 Title: Migrate raspberry pi image hacks from livecd-rootfs Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: There are currently several "hacks" in livecd-rootfs that introduce unpackaged files and/or services. In particular, everything in https://git.launchpad.net/ubuntu/+source/livecd-rootfs/tree/live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot dealing with the fstab and the swapfile needs to go. The new ubuntu-image based process for generating images won't be using these; anything to do with the fstab needs to go in the image-definition yaml, and the swapfile services ought to be owned by the ubuntu-raspi-settings- desktop package anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2004430/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2004430] Re: Migrate raspberry pi image hacks from livecd-rootfs
** Merge proposal linked: https://code.launchpad.net/~waveform/ubuntu/+source/ubuntu-settings/+git/ubuntu-settings/+merge/436647 ** Merge proposal linked: https://code.launchpad.net/~waveform/livecd-rootfs/+git/livecd-rootfs/+merge/436648 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2004430 Title: Migrate raspberry pi image hacks from livecd-rootfs Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: There are currently several "hacks" in livecd-rootfs that introduce unpackaged files and/or services. In particular, everything in https://git.launchpad.net/ubuntu/+source/livecd-rootfs/tree/live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot dealing with the fstab and the swapfile needs to go. The new ubuntu-image based process for generating images won't be using these; anything to do with the fstab needs to go in the image-definition yaml, and the swapfile services ought to be owned by the ubuntu-raspi-settings- desktop package anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2004430/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2004430] [NEW] Migrate raspberry pi image hacks from livecd-rootfs
Public bug reported: There are currently several "hacks" in livecd-rootfs that introduce unpackaged files and/or services. In particular, everything in https://git.launchpad.net/ubuntu/+source/livecd-rootfs/tree/live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot dealing with the fstab and the swapfile needs to go. The new ubuntu-image based process for generating images won't be using these; anything to do with the fstab needs to go in the image-definition yaml, and the swapfile services ought to be owned by the ubuntu-raspi-settings-desktop package anyway. ** Affects: livecd-rootfs (Ubuntu) Importance: Undecided Assignee: Dave Jones (waveform) Status: New ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Assignee: Dave Jones (waveform) Status: New ** Also affects: livecd-rootfs (Ubuntu) Importance: Undecided Status: New ** Changed in: livecd-rootfs (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) ** Changed in: ubuntu-settings (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/2004430 Title: Migrate raspberry pi image hacks from livecd-rootfs Status in livecd-rootfs package in Ubuntu: New Status in ubuntu-settings package in Ubuntu: New Bug description: There are currently several "hacks" in livecd-rootfs that introduce unpackaged files and/or services. In particular, everything in https://git.launchpad.net/ubuntu/+source/livecd-rootfs/tree/live- build/ubuntu/hooks/099-ubuntu-image-customization.chroot dealing with the fstab and the swapfile needs to go. The new ubuntu-image based process for generating images won't be using these; anything to do with the fstab needs to go in the image-definition yaml, and the swapfile services ought to be owned by the ubuntu-raspi-settings- desktop package anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/livecd-rootfs/+bug/2004430/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2003743] Re: Fix Plasma + Realtek ALC4080 USB audio device support
wrong package ** Package changed: pulseaudio (Ubuntu) => pipewire (Ubuntu) ** Attachment removed: "ProcEnviron.txt" https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+attachment/5643065/+files/ProcEnviron.txt ** Attachment removed: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+attachment/5643064/+files/ProcCpuinfoMinimal.txt ** Attachment removed: "PaInfo.txt" https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+attachment/5643063/+files/PaInfo.txt ** Attachment removed: "Dependencies.txt" https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+attachment/5643062/+files/Dependencies.txt ** Attachment removed: "CurrentDmesg.txt" https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+attachment/5643061/+files/CurrentDmesg.txt ** Attachment removed: "AlsaInfo.txt" https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+attachment/5643060/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/2003743 Title: Fix Plasma + Realtek ALC4080 USB audio device support Status in pipewire package in Ubuntu: New Bug description: Audio does not work on the MSI Z690 TOMAHAWK WIFI DDR4 (MS-7D32) motherboard when using Kubuntu 22.10 due to Realtek ALC4080 USB audio device issues. Earlier ALC4080 problems were resolved against Gnome but under Plasma desktop it's still broken due to a pipewire problem. This patch https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1429 resolves the issue and has been merged to pipewire master. Please patch kinetic so MSI Z690 Plasma users don't have to wait another 6 months for this to be resolved in kinetic-updates. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: pulseaudio 1:16.1+dfsg1-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-29.30-generic 5.19.17 Uname: Linux 5.19.0-29-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.23.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dave 7291 F wireplumber /dev/snd/controlC1: dave 7291 F wireplumber /dev/snd/seq:dave 7288 F pipewire CasperMD5CheckResult: pass CurrentDesktop: KDE Date: Mon Jan 23 10:57:51 2023 InstallationDate: Installed on 2022-05-03 (264 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio Symptom: audio UpgradeStatus: Upgraded to kinetic on 2022-12-02 (52 days ago) dmi.bios.date: 03/21/2022 dmi.bios.release: 5.24 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: 1.31 dmi.board.asset.tag: Default string dmi.board.name: MAG Z690 TOMAHAWK WIFI DDR4 (MS-7D32) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvr1.31:bd03/21/2022:br5.24:svnMicro-StarInternationalCo.,Ltd.:pnMS-7D32:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMAGZ690TOMAHAWKWIFIDDR4(MS-7D32):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0:skuDefaultstring: dmi.product.family: Default string dmi.product.name: MS-7D32 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pipewire/+bug/2003743/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2003743] [NEW] Fix Plasma + Realtek ALC4080 USB audio device support
Public bug reported: Audio does not work on the MSI Z690 TOMAHAWK WIFI DDR4 (MS-7D32) motherboard when using Kubuntu 22.10 due to Realtek ALC4080 USB audio device issues. Earlier ALC4080 problems were resolved against Gnome but under Plasma desktop it's still broken due to a pipewire problem. This patch https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1429 resolves the issue and has been merged to pipewire master. Please patch kinetic so MSI Z690 Plasma users don't have to wait another 6 months for this to be resolved in kinetic-updates. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: pulseaudio 1:16.1+dfsg1-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-29.30-generic 5.19.17 Uname: Linux 5.19.0-29-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.23.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dave 7291 F wireplumber /dev/snd/controlC1: dave 7291 F wireplumber /dev/snd/seq:dave 7288 F pipewire CasperMD5CheckResult: pass CurrentDesktop: KDE Date: Mon Jan 23 10:57:51 2023 InstallationDate: Installed on 2022-05-03 (264 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio Symptom: audio UpgradeStatus: Upgraded to kinetic on 2022-12-02 (52 days ago) dmi.bios.date: 03/21/2022 dmi.bios.release: 5.24 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: 1.31 dmi.board.asset.tag: Default string dmi.board.name: MAG Z690 TOMAHAWK WIFI DDR4 (MS-7D32) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvr1.31:bd03/21/2022:br5.24:svnMicro-StarInternationalCo.,Ltd.:pnMS-7D32:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMAGZ690TOMAHAWKWIFIDDR4(MS-7D32):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0:skuDefaultstring: dmi.product.family: Default string dmi.product.name: MS-7D32 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kinetic wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/2003743 Title: Fix Plasma + Realtek ALC4080 USB audio device support Status in pulseaudio package in Ubuntu: New Bug description: Audio does not work on the MSI Z690 TOMAHAWK WIFI DDR4 (MS-7D32) motherboard when using Kubuntu 22.10 due to Realtek ALC4080 USB audio device issues. Earlier ALC4080 problems were resolved against Gnome but under Plasma desktop it's still broken due to a pipewire problem. This patch https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1429 resolves the issue and has been merged to pipewire master. Please patch kinetic so MSI Z690 Plasma users don't have to wait another 6 months for this to be resolved in kinetic-updates. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: pulseaudio 1:16.1+dfsg1-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-29.30-generic 5.19.17 Uname: Linux 5.19.0-29-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.23.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dave 7291 F wireplumber /dev/snd/controlC1: dave 7291 F wireplumber /dev/snd/seq: dave 7288 F pipewire CasperMD5CheckResult: pass CurrentDesktop: KDE Date: Mon Jan 23 10:57:51 2023 InstallationDate: Installed on 2022-05-03 (264 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio Symptom: audio UpgradeStatus: Upgraded to kinetic on 2022-12-02 (52 days ago) dmi.bios.date: 03/21/2022 dmi.bios.release: 5.24 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: 1.31 dmi.board.asset.tag: Default string dmi.board.name: MAG Z690 TOMAHAWK WIFI DDR4 (MS-7D32) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvr1.31:bd03/21/
[Touch-packages] [Bug 2002318] Re: Please merge lsb 11.5 from Debian unstable.
Attaching patch against Debian unstable. For ease of review, relevant commits and tags have been pushed to the following repository: https://code.launchpad.net/~waveform/ubuntu/+source/lsb/+git/lsb Specifically: * logical/11.2ubuntu1 represents our split-out delta on top of old/debian (11.2) * logical/11.5ubuntu1 represents our rebased delta on top of new/debian (11.5) * merge/11.5ubuntu1 adds changelog and maintainer changes on top of logical/11.5ubuntu1, and then a pile of fixes to tidy up all the lintian warnings and patch various historically broken pieces. Hence, the following commands may produce output useful to the purposes of review. The first compares the rebased delta against the old delta: git range-diff --creation-factor=100 old/debian..logical/11.2ubuntu1 new/debian..logical/11.5ubuntu1 The second shows the additional fixes added to the rebased delta to fix the lintian warnings and historically broken functionality: git show logical/11.5ubuntu1..merge/11.5ubuntu1 I should additionally note that the historical breakage mentioned above includes the fact that certain aspects of lsbinstall have not worked for roughly 17 years (save_lsbinstall_info in initdutils.py has had the wrong argument order to cPickle.dump / pickle.dump for its entire history). We should try and determine if anything in this package is really still used (if it ever was) and follow Debian in expunging it if not because at this point the entire package is pretty much a delta. Incidentally, this is why I've also taken the liberty of replacing "Debian" with "Ubuntu" in the d/control descriptions as it seems unfair to be referencing Debian when the package is now empty upstream. ** Patch added: "1-2002318.debdiff" https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/2002318/+attachment/5640743/+files/1-2002318.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/2002318 Title: Please merge lsb 11.5 from Debian unstable. Status in lsb package in Ubuntu: New Bug description: Please merge lsb 11.5 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/2002318/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2002318] [NEW] Please merge lsb 11.5 from Debian unstable.
Public bug reported: Please merge lsb 11.5 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. ** Affects: lsb (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/2002318 Title: Please merge lsb 11.5 from Debian unstable. Status in lsb package in Ubuntu: New Bug description: Please merge lsb 11.5 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/2002318/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2001568] Re: unattended-upgrades 2.9.1+nmu2ubuntu1 failing autopkgtest on arm64
** Patch added: "uu-arm64-kernels.patch" https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/2001568/+attachment/5639009/+files/uu-arm64-kernels.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unattended-upgrades in Ubuntu. https://bugs.launchpad.net/bugs/2001568 Title: unattended-upgrades 2.9.1+nmu2ubuntu1 failing autopkgtest on arm64 Status in unattended-upgrades package in Ubuntu: New Bug description: u-u is currently failing autopkgtest on arm64. It does not look like this is a new failure (2.8ubuntu1 appears to have had exactly the same failure) but it's due to the kernel-patterns test assuming that kernel flavors cannot be a suffix of each other. This is true under Debian, and under several architectures on Ubuntu, but the arm64 architecture on Ubuntu has -generic and -generic-64k flavors which cause the test to fail. The attached debdiff corrects the test for this case. One may wonder why the test currently passes under armhf, which has -generic and -generic-lpae flavors (I certainly did!). It turns out this is only because Ubuntu autopkgtest runs armhf in a container so the kernel release reported by "uname -r" (used in the test) does not meaningfully match anything in the apt cache. Given this, the attached debdiff also restricts the kernel-patterns test to isolation-machine as the test assumes a meaningful link between the running kernel and the packages in the archive which is only true in a VM or on the bare metal. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/2001568/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2001568] [NEW] unattended-upgrades 2.9.1+nmu2ubuntu1 failing autopkgtest on arm64
Public bug reported: u-u is currently failing autopkgtest on arm64. It does not look like this is a new failure (2.8ubuntu1 appears to have had exactly the same failure) but it's due to the kernel-patterns test assuming that kernel flavors cannot be a suffix of each other. This is true under Debian, and under several architectures on Ubuntu, but the arm64 architecture on Ubuntu has -generic and -generic-64k flavors which cause the test to fail. The attached debdiff corrects the test for this case. One may wonder why the test currently passes under armhf, which has -generic and -generic-lpae flavors (I certainly did!). It turns out this is only because Ubuntu autopkgtest runs armhf in a container so the kernel release reported by "uname -r" (used in the test) does not meaningfully match anything in the apt cache. Given this, the attached debdiff also restricts the kernel-patterns test to isolation-machine as the test assumes a meaningful link between the running kernel and the packages in the archive which is only true in a VM or on the bare metal. ** Affects: unattended-upgrades (Ubuntu) Importance: Undecided Status: New ** Patch added: "uu-arm64-kernels.patch" https://bugs.launchpad.net/bugs/2001568/+attachment/5639008/+files/uu-arm64-kernels.patch ** Patch removed: "uu-arm64-kernels.patch" https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/2001568/+attachment/5639008/+files/uu-arm64-kernels.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unattended-upgrades in Ubuntu. https://bugs.launchpad.net/bugs/2001568 Title: unattended-upgrades 2.9.1+nmu2ubuntu1 failing autopkgtest on arm64 Status in unattended-upgrades package in Ubuntu: New Bug description: u-u is currently failing autopkgtest on arm64. It does not look like this is a new failure (2.8ubuntu1 appears to have had exactly the same failure) but it's due to the kernel-patterns test assuming that kernel flavors cannot be a suffix of each other. This is true under Debian, and under several architectures on Ubuntu, but the arm64 architecture on Ubuntu has -generic and -generic-64k flavors which cause the test to fail. The attached debdiff corrects the test for this case. One may wonder why the test currently passes under armhf, which has -generic and -generic-lpae flavors (I certainly did!). It turns out this is only because Ubuntu autopkgtest runs armhf in a container so the kernel release reported by "uname -r" (used in the test) does not meaningfully match anything in the apt cache. Given this, the attached debdiff also restricts the kernel-patterns test to isolation-machine as the test assumes a meaningful link between the running kernel and the packages in the archive which is only true in a VM or on the bare metal. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/2001568/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1999258] Re: Please merge dbus 1.14.4-1 from Debian unstable.
Attaching patch against Debian unstable. For ease of review, relevant commits and tags have been pushed to the following repository: https://code.launchpad.net/~waveform/ubuntu/+source/dbus/+git/dbus Specifically: * logical/1.14.0-2ubuntu3 represents our split-out delta on top of old/debian (1.14.0-2) * logical/1.14.4-1ubuntu1 represents our rebased delta on top of new/debian (1.14.4-1) * merge/1.14.4-1ubuntu1 just adds changelog and maintainer changes on top of logical/1.14.4-1ubuntu1 Hence, the following command may produce output useful to the purposes of review: git range-diff old/debian..logical/1.14.0-2ubuntu3 new/debian..logical/1.14.4-1ubuntu1 Test packages are building in ppa:waveform/dbus (https://launchpad.net/~waveform/+archive/ubuntu/dbus) ** Patch added: "1-1999258.debdiff" https://bugs.launchpad.net/ubuntu/+source/dbus/+bug/1999258/+attachment/5635632/+files/1-1999258.debdiff ** Tags added: fr-3127 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dbus in Ubuntu. https://bugs.launchpad.net/bugs/1999258 Title: Please merge dbus 1.14.4-1 from Debian unstable. Status in dbus package in Ubuntu: New Bug description: Please merge dbus 1.14.4-1 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dbus/+bug/1999258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1999258] [NEW] Please merge dbus 1.14.4-1 from Debian unstable.
Public bug reported: Please merge dbus 1.14.4-1 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. ** Affects: dbus (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dbus in Ubuntu. https://bugs.launchpad.net/bugs/1999258 Title: Please merge dbus 1.14.4-1 from Debian unstable. Status in dbus package in Ubuntu: New Bug description: Please merge dbus 1.14.4-1 from Debian unstable. Updated changelog and diff against Debian unstable to be attached below. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dbus/+bug/1999258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp