Re: [twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-07 Thread John Kalucki 
There is indeed a hard limit to the length of URLs. POST parameters,
however, can be quite large. We have many clients that send parameters with
hundreds of thousands to millions of terms, so this is broadly possible.,
Your HTTP client may or many not support this scale.

-John Kalucki
http://twitter.com/jkalucki
Infrastructure, Twitter Inc.



On Sun, Mar 7, 2010 at 5:57 PM, Mad Euchre  wrote:

> It turns out you were right with this and John was right with the
> POST. Thanks to all who replied. As soon as I changed
> (request.readuntilend()) to (request.readline()) the data started
> flowing in.
>
> I don't want to muddy the water on this thread but I will by asking
> the next predictable problem.  If I have  query string that is ?
> track=peter,paul,mary, etc for 1000 terms..won't that exceed some
> http limit on length? How does one track about 1000 terms on a single
> stream connection? even if there is a method called
> request.query(track=peter,paul,mary,etc) isn't that just a substitute
> for putting it on the actual URL thus still exceding some length
> limit?
>
> Thanks,
>
>  peter
>
> On Mar 5, 4:38 pm, Mark McBride  wrote:
> > I think this is slightly backwards.  You want to use the GET method, but
> set
> > up the URI you have (with the track=Microsoft parameter).  You will also
> > need to authenticate.
> >
> > Note that this is a streaming API.  I don't know VB all that well, but
> > there's a reasonable chance that this call only returns data when the
> HTTP
> > call has finished.  The streaming API will *never* finish, so you'll need
> to
> > parse data as it's available.  Without looking at VB doc I have no idea
> how
> > you would set that up.
> >
> >   ---Mark
> >
> > http://twitter.com/mccv
> >
> >
> >
> > On Fri, Mar 5, 2010 at 9:54 AM, Mad Euchre 
> wrote:
> > > Thanks.
> >
> > > Now I'm using the post method.
> >
> > > How should I use the track parameter? Something like this?
> >
> > >  address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
> > > track=Microsoft")
> >
> > > I'm getting connected but no data  that matches Microsoft is streaming
> > > over.No data for that matter.
> >
> > > I'm passing my name and pw in the request.credentials method. The
> > > server returned a 200 OK when I added the credentials but not when it
> > > was in the URL alone.
> >
> > > ie; address = New Uri("http://stream.twitter.com/1/statuses/
> > > filter.json?track=Microsoft - name:pw"
> >
> > > Thanks,
> >
> > > Peter
> >
> > > On Mar 2, 5:19 pm, John Kalucki  wrote:
> > > > The text file approach only applies to POST parameters set from the
> curl
> > > > command, and in no other case.
> >
> > > > When creating an HTTP client from within a program, you should be
> able to
> > > > configure the POST parameters via method calls. If you can't, it's a
> > > pretty
> > > > worthless HTTP library. Each client library is different, check your
> > > docs.
> >
> > > > -John Kaluckihttp://twitter.com/jkalucki
> > > > Infrastructure, Twitter Inc.
> >
> > > > On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre  >
> > > wrote:
> > > > > This is the VB code I would use to start any http stream
> >
> > > > >request = DirectCast(WebRequest.Create("http://
> > > > > stream.twitter.com/1/statuses/filter.json - name:pw"),
> HttpWebRequest)
> > > > >request.Credentials = New NetworkCredential("name",
> "pw")
> > > > >' Get response
> > > > >response = DirectCast(request.GetResponse(),
> > > > > HttpWebResponse)
> >
> > > > >' Get the response stream into a reader
> > > > >reader = New StreamReader(response.GetResponseStream())
> >
> > > > > The streaming api documentation says to create a file called
> track.txt
> > > > > and add text similar to this without the quotes.   "track=peter,
> paul,
> > > > > mary"
> >
> > > > > Then use curl @track.txthttp://
> > > stream.twitter.com/1/statuses/filter.json
> > > > > - name:pw
> >
> > > > > I can't believe I have to shell out to DOS and run the curl command
> > > > > line.
> >
> > > > > My direct question is how do others incorportate the @track.txt in
> the
> > > > > VB.Net web request?
> >
> > > > > Maybe something like this?
> >
> > > > >http://stream.twitter.com/1/statuses/filter.json-name:pw?
> > > > > track.txt
> >
> > > > > Thanks- Hide quoted text -
> >
> > > > - Show quoted text -- Hide quoted text -
> >
> > - Show quoted text -
>

[twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-07 Thread Mad Euchre 
It turns out you were right with this and John was right with the
POST. Thanks to all who replied. As soon as I changed
(request.readuntilend()) to (request.readline()) the data started
flowing in.

I don't want to muddy the water on this thread but I will by asking
the next predictable problem.  If I have  query string that is ?
track=peter,paul,mary, etc for 1000 terms..won't that exceed some
http limit on length? How does one track about 1000 terms on a single
stream connection? even if there is a method called
request.query(track=peter,paul,mary,etc) isn't that just a substitute
for putting it on the actual URL thus still exceding some length
limit?

Thanks,

 peter

On Mar 5, 4:38 pm, Mark McBride  wrote:
> I think this is slightly backwards.  You want to use the GET method, but set
> up the URI you have (with the track=Microsoft parameter).  You will also
> need to authenticate.
>
> Note that this is a streaming API.  I don't know VB all that well, but
> there's a reasonable chance that this call only returns data when the HTTP
> call has finished.  The streaming API will *never* finish, so you'll need to
> parse data as it's available.  Without looking at VB doc I have no idea how
> you would set that up.
>
>   ---Mark
>
> http://twitter.com/mccv
>
>
>
> On Fri, Mar 5, 2010 at 9:54 AM, Mad Euchre  wrote:
> > Thanks.
>
> > Now I'm using the post method.
>
> > How should I use the track parameter? Something like this?
>
> >  address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
> > track=Microsoft")
>
> > I'm getting connected but no data  that matches Microsoft is streaming
> > over.No data for that matter.
>
> > I'm passing my name and pw in the request.credentials method. The
> > server returned a 200 OK when I added the credentials but not when it
> > was in the URL alone.
>
> > ie; address = New Uri("http://stream.twitter.com/1/statuses/
> > filter.json?track=Microsoft - name:pw"
>
> > Thanks,
>
> > Peter
>
> > On Mar 2, 5:19 pm, John Kalucki  wrote:
> > > The text file approach only applies to POST parameters set from the curl
> > > command, and in no other case.
>
> > > When creating an HTTP client from within a program, you should be able to
> > > configure the POST parameters via method calls. If you can't, it's a
> > pretty
> > > worthless HTTP library. Each client library is different, check your
> > docs.
>
> > > -John Kaluckihttp://twitter.com/jkalucki
> > > Infrastructure, Twitter Inc.
>
> > > On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre 
> > wrote:
> > > > This is the VB code I would use to start any http stream
>
> > > >            request = DirectCast(WebRequest.Create("http://
> > > > stream.twitter.com/1/statuses/filter.json - name:pw"), HttpWebRequest)
> > > >            request.Credentials = New NetworkCredential("name", "pw")
> > > >            ' Get response
> > > >            response = DirectCast(request.GetResponse(),
> > > > HttpWebResponse)
>
> > > >            ' Get the response stream into a reader
> > > >            reader = New StreamReader(response.GetResponseStream())
>
> > > > The streaming api documentation says to create a file called track.txt
> > > > and add text similar to this without the quotes.   "track=peter, paul,
> > > > mary"
>
> > > > Then use curl @track.txthttp://
> > stream.twitter.com/1/statuses/filter.json
> > > > - name:pw
>
> > > > I can't believe I have to shell out to DOS and run the curl command
> > > > line.
>
> > > > My direct question is how do others incorportate the @track.txt in the
> > > > VB.Net web request?
>
> > > > Maybe something like this?
>
> > > >http://stream.twitter.com/1/statuses/filter.json-name:pw?
> > > > track.txt
>
> > > > Thanks- Hide quoted text -
>
> > > - Show quoted text -- Hide quoted text -
>
> - Show quoted text -

Re: [twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-05 Thread Mark McBride 
Let me clarify... You can do one of

1) Use GET, and specify the parameters as part of the URL query string
(e.g. 
"http://stream.twitter.com/1/statuses/filter.json?track=Microsoft
")
2) Use POST, and pass your arguments in through some VB method.  In this
case the URL will be
"http://stream.twitter.com/1/statuses/filter.json
"

  ---Mark

http://twitter.com/mccv


On Fri, Mar 5, 2010 at 2:55 PM, Mad Euchre  wrote:

> I switch to post after reading John's response.
>
> When creating an HTTP client from within a program, you should be able
> to
> configure the POST parameters via method calls. If you can't, it's a
> pretty
> worthless HTTP library. Each client library is different, check your
> docs.
>
> -John Kalucki
>
> On Mar 5, 4:38 pm, Mark McBride  wrote:
> > I think this is slightly backwards.  You want to use the GET method, but
> set
> > up the URI you have (with the track=Microsoft parameter).  You will also
> > need to authenticate.
> >
> > Note that this is a streaming API.  I don't know VB all that well, but
> > there's a reasonable chance that this call only returns data when the
> HTTP
> > call has finished.  The streaming API will *never* finish, so you'll need
> to
> > parse data as it's available.  Without looking at VB doc I have no idea
> how
> > you would set that up.
> >
> >   ---Mark
> >
> > http://twitter.com/mccv
> >
> >
> >
> > On Fri, Mar 5, 2010 at 9:54 AM, Mad Euchre 
> wrote:
> > > Thanks.
> >
> > > Now I'm using the post method.
> >
> > > How should I use the track parameter? Something like this?
> >
> > >  address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
> > > track=Microsoft")
> >
> > > I'm getting connected but no data  that matches Microsoft is streaming
> > > over.No data for that matter.
> >
> > > I'm passing my name and pw in the request.credentials method. The
> > > server returned a 200 OK when I added the credentials but not when it
> > > was in the URL alone.
> >
> > > ie; address = New Uri("http://stream.twitter.com/1/statuses/
> > > filter.json?track=Microsoft - name:pw"
> >
> > > Thanks,
> >
> > > Peter
> >
> > > On Mar 2, 5:19 pm, John Kalucki  wrote:
> > > > The text file approach only applies to POST parameters set from the
> curl
> > > > command, and in no other case.
> >
> > > > When creating an HTTP client from within a program, you should be
> able to
> > > > configure the POST parameters via method calls. If you can't, it's a
> > > pretty
> > > > worthless HTTP library. Each client library is different, check your
> > > docs.
> >
> > > > -John Kaluckihttp://twitter.com/jkalucki
> > > > Infrastructure, Twitter Inc.
> >
> > > > On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre  >
> > > wrote:
> > > > > This is the VB code I would use to start any http stream
> >
> > > > >request = DirectCast(WebRequest.Create("http://
> > > > > stream.twitter.com/1/statuses/filter.json - name:pw"),
> HttpWebRequest)
> > > > >request.Credentials = New NetworkCredential("name",
> "pw")
> > > > >' Get response
> > > > >response = DirectCast(request.GetResponse(),
> > > > > HttpWebResponse)
> >
> > > > >' Get the response stream into a reader
> > > > >reader = New StreamReader(response.GetResponseStream())
> >
> > > > > The streaming api documentation says to create a file called
> track.txt
> > > > > and add text similar to this without the quotes.   "track=peter,
> paul,
> > > > > mary"
> >
> > > > > Then use curl @track.txthttp://
> > > stream.twitter.com/1/statuses/filter.json
> > > > > - name:pw
> >
> > > > > I can't believe I have to shell out to DOS and run the curl command
> > > > > line.
> >
> > > > > My direct question is how do others incorportate the @track.txt in
> the
> > > > > VB.Net web request?
> >
> > > > > Maybe something like this?
> >
> > > > >http://stream.twitter.com/1/statuses/filter.json-name:pw?
> > > > > track.txt
> >
> > > > > Thanks- Hide quoted text -
> >
> > > > - Show quoted text -- Hide quoted text -
> >
> > - Show quoted text -
>

[twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-05 Thread Mad Euchre 
I switch to post after reading John's response.

When creating an HTTP client from within a program, you should be able
to
configure the POST parameters via method calls. If you can't, it's a
pretty
worthless HTTP library. Each client library is different, check your
docs.

-John Kalucki

On Mar 5, 4:38 pm, Mark McBride  wrote:
> I think this is slightly backwards.  You want to use the GET method, but set
> up the URI you have (with the track=Microsoft parameter).  You will also
> need to authenticate.
>
> Note that this is a streaming API.  I don't know VB all that well, but
> there's a reasonable chance that this call only returns data when the HTTP
> call has finished.  The streaming API will *never* finish, so you'll need to
> parse data as it's available.  Without looking at VB doc I have no idea how
> you would set that up.
>
>   ---Mark
>
> http://twitter.com/mccv
>
>
>
> On Fri, Mar 5, 2010 at 9:54 AM, Mad Euchre  wrote:
> > Thanks.
>
> > Now I'm using the post method.
>
> > How should I use the track parameter? Something like this?
>
> >  address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
> > track=Microsoft")
>
> > I'm getting connected but no data  that matches Microsoft is streaming
> > over.No data for that matter.
>
> > I'm passing my name and pw in the request.credentials method. The
> > server returned a 200 OK when I added the credentials but not when it
> > was in the URL alone.
>
> > ie; address = New Uri("http://stream.twitter.com/1/statuses/
> > filter.json?track=Microsoft - name:pw"
>
> > Thanks,
>
> > Peter
>
> > On Mar 2, 5:19 pm, John Kalucki  wrote:
> > > The text file approach only applies to POST parameters set from the curl
> > > command, and in no other case.
>
> > > When creating an HTTP client from within a program, you should be able to
> > > configure the POST parameters via method calls. If you can't, it's a
> > pretty
> > > worthless HTTP library. Each client library is different, check your
> > docs.
>
> > > -John Kaluckihttp://twitter.com/jkalucki
> > > Infrastructure, Twitter Inc.
>
> > > On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre 
> > wrote:
> > > > This is the VB code I would use to start any http stream
>
> > > >            request = DirectCast(WebRequest.Create("http://
> > > > stream.twitter.com/1/statuses/filter.json - name:pw"), HttpWebRequest)
> > > >            request.Credentials = New NetworkCredential("name", "pw")
> > > >            ' Get response
> > > >            response = DirectCast(request.GetResponse(),
> > > > HttpWebResponse)
>
> > > >            ' Get the response stream into a reader
> > > >            reader = New StreamReader(response.GetResponseStream())
>
> > > > The streaming api documentation says to create a file called track.txt
> > > > and add text similar to this without the quotes.   "track=peter, paul,
> > > > mary"
>
> > > > Then use curl @track.txthttp://
> > stream.twitter.com/1/statuses/filter.json
> > > > - name:pw
>
> > > > I can't believe I have to shell out to DOS and run the curl command
> > > > line.
>
> > > > My direct question is how do others incorportate the @track.txt in the
> > > > VB.Net web request?
>
> > > > Maybe something like this?
>
> > > >http://stream.twitter.com/1/statuses/filter.json-name:pw?
> > > > track.txt
>
> > > > Thanks- Hide quoted text -
>
> > > - Show quoted text -- Hide quoted text -
>
> - Show quoted text -

Re: [twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-05 Thread Andrew Badera 
You need a client returning incremental HTTP responses. I don't think
WebResponse does that. TcpClient definitely does, that's what I'm
using in C#.

∞ Andy Badera
∞ +1 518-641-1280 Google Voice
∞ This email is: [ ] bloggable [x] ask first [ ] private
∞ Google me: http://www.google.com/search?q=andrew%20badera



On Fri, Mar 5, 2010 at 4:38 PM, Mark McBride  wrote:
> I think this is slightly backwards.  You want to use the GET method, but set
> up the URI you have (with the track=Microsoft parameter).  You will also
> need to authenticate.
> Note that this is a streaming API.  I don't know VB all that well, but
> there's a reasonable chance that this call only returns data when the HTTP
> call has finished.  The streaming API will *never* finish, so you'll need to
> parse data as it's available.  Without looking at VB doc I have no idea how
> you would set that up.
>
>   ---Mark
>
> http://twitter.com/mccv
>
>
> On Fri, Mar 5, 2010 at 9:54 AM, Mad Euchre  wrote:
>>
>> Thanks.
>>
>> Now I'm using the post method.
>>
>> How should I use the track parameter? Something like this?
>>
>>  address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
>> track=Microsoft")
>>
>> I'm getting connected but no data  that matches Microsoft is streaming
>> over.No data for that matter.
>>
>> I'm passing my name and pw in the request.credentials method. The
>> server returned a 200 OK when I added the credentials but not when it
>> was in the URL alone.
>>
>> ie; address = New Uri("http://stream.twitter.com/1/statuses/
>> filter.json?track=Microsoft - name:pw"
>>
>> Thanks,
>>
>> Peter
>>
>>
>>
>>
>>
>>
>>
>>
>> On Mar 2, 5:19 pm, John Kalucki  wrote:
>> > The text file approach only applies to POST parameters set from the curl
>> > command, and in no other case.
>> >
>> > When creating an HTTP client from within a program, you should be able
>> > to
>> > configure the POST parameters via method calls. If you can't, it's a
>> > pretty
>> > worthless HTTP library. Each client library is different, check your
>> > docs.
>> >
>> > -John Kaluckihttp://twitter.com/jkalucki
>> > Infrastructure, Twitter Inc.
>> >
>> >
>> >
>> > On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre 
>> > wrote:
>> > > This is the VB code I would use to start any http stream
>> >
>> > >            request = DirectCast(WebRequest.Create("http://
>> > > stream.twitter.com/1/statuses/filter.json - name:pw"), HttpWebRequest)
>> > >            request.Credentials = New NetworkCredential("name", "pw")
>> > >            ' Get response
>> > >            response = DirectCast(request.GetResponse(),
>> > > HttpWebResponse)
>> >
>> > >            ' Get the response stream into a reader
>> > >            reader = New StreamReader(response.GetResponseStream())
>> >
>> > > The streaming api documentation says to create a file called track.txt
>> > > and add text similar to this without the quotes.   "track=peter, paul,
>> > > mary"
>> >
>> > > Then use curl
>> > > @track.txthttp://stream.twitter.com/1/statuses/filter.json
>> > > - name:pw
>> >
>> > > I can't believe I have to shell out to DOS and run the curl command
>> > > line.
>> >
>> > > My direct question is how do others incorportate the @track.txt in the
>> > > VB.Net web request?
>> >
>> > > Maybe something like this?
>> >
>> > >http://stream.twitter.com/1/statuses/filter.json- name:pw?
>> > > track.txt
>> >
>> > > Thanks- Hide quoted text -
>> >
>> > - Show quoted text -
>
>

Re: [twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-05 Thread Mark McBride 
I think this is slightly backwards.  You want to use the GET method, but set
up the URI you have (with the track=Microsoft parameter).  You will also
need to authenticate.

Note that this is a streaming API.  I don't know VB all that well, but
there's a reasonable chance that this call only returns data when the HTTP
call has finished.  The streaming API will *never* finish, so you'll need to
parse data as it's available.  Without looking at VB doc I have no idea how
you would set that up.

  ---Mark

http://twitter.com/mccv


On Fri, Mar 5, 2010 at 9:54 AM, Mad Euchre  wrote:

> Thanks.
>
> Now I'm using the post method.
>
> How should I use the track parameter? Something like this?
>
>  address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
> track=Microsoft")
>
> I'm getting connected but no data  that matches Microsoft is streaming
> over.No data for that matter.
>
> I'm passing my name and pw in the request.credentials method. The
> server returned a 200 OK when I added the credentials but not when it
> was in the URL alone.
>
> ie; address = New Uri("http://stream.twitter.com/1/statuses/
> filter.json?track=Microsoft - name:pw"
>
> Thanks,
>
> Peter
>
>
>
>
>
>
>
>
> On Mar 2, 5:19 pm, John Kalucki  wrote:
> > The text file approach only applies to POST parameters set from the curl
> > command, and in no other case.
> >
> > When creating an HTTP client from within a program, you should be able to
> > configure the POST parameters via method calls. If you can't, it's a
> pretty
> > worthless HTTP library. Each client library is different, check your
> docs.
> >
> > -John Kaluckihttp://twitter.com/jkalucki
> > Infrastructure, Twitter Inc.
> >
> >
> >
> > On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre 
> wrote:
> > > This is the VB code I would use to start any http stream
> >
> > >request = DirectCast(WebRequest.Create("http://
> > > stream.twitter.com/1/statuses/filter.json - name:pw"), HttpWebRequest)
> > >request.Credentials = New NetworkCredential("name", "pw")
> > >' Get response
> > >response = DirectCast(request.GetResponse(),
> > > HttpWebResponse)
> >
> > >' Get the response stream into a reader
> > >reader = New StreamReader(response.GetResponseStream())
> >
> > > The streaming api documentation says to create a file called track.txt
> > > and add text similar to this without the quotes.   "track=peter, paul,
> > > mary"
> >
> > > Then use curl @track.txthttp://
> stream.twitter.com/1/statuses/filter.json
> > > - name:pw
> >
> > > I can't believe I have to shell out to DOS and run the curl command
> > > line.
> >
> > > My direct question is how do others incorportate the @track.txt in the
> > > VB.Net web request?
> >
> > > Maybe something like this?
> >
> > >http://stream.twitter.com/1/statuses/filter.json- name:pw?
> > > track.txt
> >
> > > Thanks- Hide quoted text -
> >
> > - Show quoted text -
>

[twitter-dev] Re: Need help with the streaming API syntax....specifically how to point to the track text file without using curl

2010-03-05 Thread Mad Euchre 
Thanks.

Now I'm using the post method.

How should I use the track parameter? Something like this?

 address = New Uri("http://stream.twitter.com/1/statuses/filter.json?
track=Microsoft")

I'm getting connected but no data  that matches Microsoft is streaming
over.No data for that matter.

I'm passing my name and pw in the request.credentials method. The
server returned a 200 OK when I added the credentials but not when it
was in the URL alone.

ie; address = New Uri("http://stream.twitter.com/1/statuses/
filter.json?track=Microsoft - name:pw"

Thanks,

Peter








On Mar 2, 5:19 pm, John Kalucki  wrote:
> The text file approach only applies to POST parameters set from the curl
> command, and in no other case.
>
> When creating an HTTP client from within a program, you should be able to
> configure the POST parameters via method calls. If you can't, it's a pretty
> worthless HTTP library. Each client library is different, check your docs.
>
> -John Kaluckihttp://twitter.com/jkalucki
> Infrastructure, Twitter Inc.
>
>
>
> On Tue, Mar 2, 2010 at 12:42 PM, Mad Euchre  wrote:
> > This is the VB code I would use to start any http stream
>
> >            request = DirectCast(WebRequest.Create("http://
> > stream.twitter.com/1/statuses/filter.json - name:pw"), HttpWebRequest)
> >            request.Credentials = New NetworkCredential("name", "pw")
> >            ' Get response
> >            response = DirectCast(request.GetResponse(),
> > HttpWebResponse)
>
> >            ' Get the response stream into a reader
> >            reader = New StreamReader(response.GetResponseStream())
>
> > The streaming api documentation says to create a file called track.txt
> > and add text similar to this without the quotes.   "track=peter, paul,
> > mary"
>
> > Then use curl @track.txthttp://stream.twitter.com/1/statuses/filter.json
> > - name:pw
>
> > I can't believe I have to shell out to DOS and run the curl command
> > line.
>
> > My direct question is how do others incorportate the @track.txt in the
> > VB.Net web request?
>
> > Maybe something like this?
>
> >http://stream.twitter.com/1/statuses/filter.json- name:pw?
> > track.txt
>
> > Thanks- Hide quoted text -
>
> - Show quoted text -