This patch addresses some comments raised by Scott in the last versions.
Here the changes in detail:
- Removed __maybe_unused as its not needed
- Added check for strength == 4 and error out for the unsupported
ECC strength values
- Don't set .caclulate, .correct, and .bytes for NAND_ECC_SOFT_BCH
Hi Siva,
On 14 September 2015 at 11:42, Siva Durga Prasad Paladugu
wrote:
> Hi Jagan,
>
>> -Original Message-
>> From: Jagan Teki [mailto:jt...@openedev.com]
>> Sent: Tuesday, September 08, 2015 2:52 PM
>> To: u-boot@lists.denx.de
>> Cc: Jagan Teki; Siva Durga Prasad Paladugu; Michal Sime
On Sun, 2015-09-13 at 20:51 +0200, Hans de Goede wrote:
> Hi,
>
> On 13-09-15 20:50, Ian Campbell wrote:
> > Maybe even:
> >
> > /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
> > * since it needs to fit in with the other values. By also #defining it
> > * we get warnings
Signed-off-by: Yangbo Lu
Cc: York Sun
---
include/configs/T1040QDS.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index a0390a8..8353b8f 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -599,6 +599,7 @@ uns
If adapter card type identification is supported for platform, we would
enable dat[4:7] for eMMC4.5 card.
Signed-off-by: Yangbo Lu
Cc: York Sun
---
board/freescale/common/qixis.h | 2 ++
drivers/mmc/fsl_esdhc.c| 3 +++
2 files changed, 5 insertions(+)
diff --git a/board/freescale/commo
Signed-off-by: Yangbo Lu
Cc: York Sun
---
include/configs/T1040QDS.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 8353b8f..92bc295 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -593,6 +593,7 @@ uns
Hi Fabio,
On Sun, Sep 13, 2015 at 01:11:57PM -0300, Fabio Estevam wrote:
>Hi Adrian,
>
>I noticed that the reset command fails on mx7sabresd board:
>
>=> reset
>resetting ...
>(it gets stuck here).
I have patches to fix this issue:
https://patchwork.ozlabs.org/patch/517269/
https://patchwork.ozla
Hi Thomas,
added Simon and Stephen to cc on this.
On 13.09.2015 10:32, Thomas Chou wrote:
As the io space remapping ioremap() and bridge address
translation fdt_translate_address() are not usually used
in u-boot driver model by dev_get_addr(). We would better
convert the reg address map in the
We should not simple use "writew(WCR_WDE, &wdog->wcr)" to set
wcr, since this will override bits set before reset_cpu.
Use clrsetbits_le32 instead of writew to fix this issue.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Fabio Estevam
Cc: Sebastian Siewior
---
drivers/watchdog/imx_watchdog.
When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs.
Also If still checking mux_ctrl_ofs, we have no chance to set iomux
for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs
for this register is 0.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Fabio Est
We use trigger pmic reset to reset the board, so set bit SRS to
disable internal WDOG_RESET_B_DEB to make reset stable.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Fabio Estevam
Cc: Adrian Alonso
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 10 +-
1 file changed, 9 insertions(+),
On 12.09.2015 17:20, Tom Rini wrote:
On Sat, Sep 12, 2015 at 09:46:51AM -0500, Scott Wood wrote:
On Sat, 2015-09-12 at 10:46 -0400, Tom Rini wrote:
On Sat, Sep 12, 2015 at 09:36:54AM -0500, Scott Wood wrote:
On Sat, 2015-09-12 at 08:50 -0400, Tom Rini wrote:
On Wed, Sep 02, 2015 at 02:29:12PM
Hi Stephen,
On 11.09.2015 19:07, Stephen Warren wrote:
On 09/09/2015 11:07 AM, Simon Glass wrote:
+Stephen
Hi Stefan,
On Thursday, 3 September 2015, Stefan Roese wrote:
The current "simple" address translation simple_bus_translate() is not
working on some platforms (e.g. MVEBU). As here mo
Lets consider following scenario:
- One uses echo -n "key=value" to define environment variable in a file (single
variable)
- The file content is "key=value" without any terminating byte (e.g. 0x0a or
0x0d).
- The file is loaded to u-boot non zero'ed RAM buffer (with load command).
- Then "env imp
Without this patch memory is not released on early exit.
Signed-off-by: Lukasz Majewski
---
lib/hashtable.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 7df424a..02b4105 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -842,
On Mon, Sep 14, 2015 at 05:29:04AM +0900, Nobuhiro Iwamatsu wrote:
> Hi Tom,
>
> Please pull u-boot-sh rmobile branch.
>
> The following changes since commit f875bbb49111c308b90b9ca74d1b79f69498b278:
>
> ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support
> (2015-08-31 00:29:23
Hi Tom,
Please pull u-boot-sh rmobile branch.
The following changes since commit f875bbb49111c308b90b9ca74d1b79f69498b278:
ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support
(2015-08-31 00:29:23 +0900)
are available in the git repository at:
git://git.denx.de/u-boot-sh.git
Hi,
On 13-09-15 20:50, Ian Campbell wrote:
On Sun, 2015-09-13 at 18:38 +0200, Hans de Goede wrote:
Hi,
On 13-09-15 18:33, Ian Campbell wrote:
On Sun, 2015-09-13 at 17:42 +0200, Hans de Goede wrote:
index 7c1507b..6aa1bf2 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi
On Sun, 2015-09-13 at 18:38 +0200, Hans de Goede wrote:
> Hi,
>
> On 13-09-15 18:33, Ian Campbell wrote:
> > On Sun, 2015-09-13 at 17:42 +0200, Hans de Goede wrote:
> >> index 7c1507b..6aa1bf2 100644
> >> --- a/include/configs/sunxi-common.h
> >> +++ b/include/configs/sunxi-common.h
> >> @@ -73,6
Hi,
On 13-09-15 19:13, Maxime Ripard wrote:
On Thu, Sep 10, 2015 at 08:47:03PM +0200, Hans de Goede wrote:
Hi,
On 03-09-15 23:41, Maxime Ripard wrote:
Hi Hans,
On Tue, Sep 01, 2015 at 11:01:06AM +0200, Hans de Goede wrote:
Hi,
On 31-08-15 16:46, Maxime Ripard wrote:
The A13-Olinuxino has
On Thu, Sep 10, 2015 at 08:47:03PM +0200, Hans de Goede wrote:
> Hi,
>
> On 03-09-15 23:41, Maxime Ripard wrote:
> >Hi Hans,
> >
> >On Tue, Sep 01, 2015 at 11:01:06AM +0200, Hans de Goede wrote:
> >>Hi,
> >>
> >>On 31-08-15 16:46, Maxime Ripard wrote:
> >>>The A13-Olinuxino has a mini-USB connecto
On Sun, Sep 06, 2015 at 03:28:34PM -0400, Tom Rini wrote:
> On Sun, Sep 06, 2015 at 01:27:20PM +0200, Maxime Ripard wrote:
> > On Fri, Sep 04, 2015 at 01:20:38PM -0400, Tom Rini wrote:
> > > On Mon, Aug 31, 2015 at 04:46:04PM +0200, Maxime Ripard wrote:
> > >
> > > > To check the alignment of the
Hi,
On 13-09-15 18:54, Karsten Merker wrote:
On Sun, Sep 13, 2015 at 05:25:57PM +0200, Hans de Goede wrote:
For the upcoming nand support we need a bigger heap, esp. ubi[fs] uses
quite a bit of memory, increase the heap size to 64 MB.
[...]
/*
- * 240M RAM (256M minimum minus space for the
On Tuesday 08 September 2015 08:56:12 Joe Hershberger wrote:
> On Mon, Sep 7, 2015 at 10:12 PM, Stefan BrĂ¼ns
>
> wrote:
> > Using NAKs on empty RX fifo for bulk in transfers is the right choice
> > for a interrupt driven model, but U-Boot uses polling and expects an
> > immediate answer if there
Hi,
On 13-09-15 18:33, Ian Campbell wrote:
On Sun, 2015-09-13 at 17:42 +0200, Hans de Goede wrote:
index 7c1507b..6aa1bf2 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -73,6 +73,9 @@
#define CONFIG_SYS_LOAD_ADDR 0x2200 /* default
load address
On Sun, 2015-09-13 at 17:42 +0200, Hans de Goede wrote:
> common/dlmalloc.c is quite big, both in .text and .data usage. E.g.
> for a
> Mele_M9 sun6i board build this reduces .text from 0x4214 to 0x3b94
> bytes,
> and .data from 0x54c to 0x144 bytes.
>
> Signed-off-by: Hans de Goede
Acked-by: Ia
On Sun, 2015-09-13 at 17:42 +0200, Hans de Goede wrote:
> index 7c1507b..6aa1bf2 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -73,6 +73,9 @@
> #define CONFIG_SYS_LOAD_ADDR 0x2200 /* default
> load address */
> #define CONFIG_SYS_TEXT_BASE
On Sun, 2015-09-13 at 17:42 +0200, Hans de Goede wrote:
> crt0.S will both memset the bss sectioan and call board_init_r for
> us,
> so there is no need to do either ourselves.
>
> Signed-off-by: Hans de Goede
Acked-by: Ian Campbell
___
U-Boot mailing
On Sun, 2015-09-13 at 17:25 +0200, Hans de Goede wrote:
> For the upcoming nand support we need a bigger heap, esp. ubi[fs]
> uses
> quite a bit of memory, increase the heap size to 64 MB.
>
> Our video code returns unused reserved framebuffer memory to the
> kernel
> before booting it. Drop the #
Hi Adrian,
I noticed that the reset command fails on mx7sabresd board:
=> reset
resetting ...
(it gets stuck here).
Could you please look at it?
Regards,
Fabio Estevam
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo
From: Fabio Estevam
Include in order to fix the following sparse warning:
board/freescale/mx7dsabresd/mx7dsabresd.c:538:5: warning: symbol
'board_ehci_hcd_init' was not declared. Should it be static?
Signed-off-by: Fabio Estevam
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 1 +
1 file ch
From: Fabio Estevam
iox74lv_set() is not used anywhere, so let's remove it.
Signed-off-by: Fabio Estevam
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 38 ---
1 file changed, 38 deletions(-)
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c
b/board/freescal
From: Fabio Estevam
get_board_rev() is not actually providing the board revision.
It just returns the CPU revision instead.
As the CPU revision is already printed on boot, there is no
reason to have get_board_rev(), so let's remove it.
Signed-off-by: Fabio Estevam
---
board/freescale/mx7dsab
From: Fabio Estevam
CONFIG_FEC_DMA_MINALIGN is not used anywhere, so let's remove it.
Signed-off-by: Fabio Estevam
---
include/configs/mx7dsabresd.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index ec6e0a6..2a736c4 100644
--
From: Fabio Estevam
Make the internal symbols static when possible.
This prevents sparse build warnings.
Signed-off-by: Fabio Estevam
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/freescale/mx7dsabresd/mx7dsabre
Hi Siva,
On 10 September 2015 at 15:26, Siva Durga Prasad Paladugu
wrote:
> Define CONFIG_SYS_SPI_ARGS_OFFS, CONFIG_SYS_SPI_ARGS_SIZE
> and CONFIG_SYS_SPI_KERNEL_OFFS which will be used in SPL
> spi mode.
Please add proper description about memory allots of SPI-SPL configs.
>
> Signed-off-by: S
crt0.S will both memset the bss sectioan and call board_init_r for us,
so there is no need to do either ourselves.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/board.c | 5 -
1 file changed, 5 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi
common/dlmalloc.c is quite big, both in .text and .data usage. E.g. for a
Mele_M9 sun6i board build this reduces .text from 0x4214 to 0x3b94 bytes,
and .data from 0x54c to 0x144 bytes.
Signed-off-by: Hans de Goede
---
arch/arm/Kconfig | 1 +
include/configs/sunxi-common.h | 3 ---
common/dlmalloc.c is quite big, both in .text and .data usage, therefor
on some boards the SPL is build to use only malloc_simple.c and not the
dlmalloc.c code. This is done in various include/configs/foo.h with the
following construct:
This commit introduces a SPL_MALLOC_SIMPLE Kconfig bool which
Hi Simon,
Here is a patch-set to add support to keep using simple-malloc after dram
is available in the SPL, using the spl stack relocation function to
switch to a new heap which uses a chunk of the now in DRAM stack.
I think you're the best candidate to review and merge the core patches
(patches
spl_relocate_stack_gd only gets called from arch/arm/lib/crt0.S which
clears the bss directly after calling it, so there is no need to clear
it from spl_relocate_stack_gd.
Signed-off-by: Hans de Goede
---
common/spl/spl.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/common/spl/spl.c b/c
Select CONFIG_SPL_STACK_R for sunxi boards, this gives us much more
room on the stack once we've the DRAM running.
Besides being a good change to have on itself, this also paves the
way for switching to using malloc_simple in the SPL which cuts of
close to 4KiB of the SPL size.
Signed-off-by: Han
From: Philipp Rosenberger
The gd->malloc_ptr and the gd->malloc_limit are offsets to gd->malloc_base.
But the addr variable contains the absolute address. The new_ptr must be:
addr + bytes - gd->malloc_base.
Signed-off-by: Philipp Rosenberger
Reviewed-by: Hans de Goede
Signed-off-by: Hans de G
malloc_simple uses a part of the stack as heap, initially it uses
SYS_MALLOC_F_LEN bytes which typically is quite small as the initial
stacks sits in SRAM and we do not have that much SRAM to work with.
When DRAM becomes available we may switch the stack from SRAM to DRAM
to give use more room. Th
For the upcoming nand support we need a bigger heap, esp. ubi[fs] uses
quite a bit of memory, increase the heap size to 64 MB.
Our video code returns unused reserved framebuffer memory to the kernel
before booting it. Drop the #ifdef-ery and simply always reserve 16 MB.
Adjust bootm_size for the
On Sunday, September 13, 2015 at 12:03:18 PM, Lukasz Majewski wrote:
> Hi Marek,
Hi,
[...]
> > > > Now from this thread I see that there're other reasons that might
> > > > affect length of at least write operation. In other words it
> > > > could be complicated unfortunately.
> > >
> > > My gu
On Sunday, September 13, 2015 at 03:40:04 PM, Thomas Chou wrote:
> Add ioremap() to map physical address to uncached virtual
> address. We need this to convert the reg address from the
> device tree.
>
> The order of headers inclusion in interrupts.c is changed
> because common.h will include boar
On Sunday, September 13, 2015 at 10:32:09 AM, Thomas Chou wrote:
> As the io space remapping ioremap() and bridge address
> translation fdt_translate_address() are not usually used
> in u-boot driver model by dev_get_addr(). We would better
> convert the reg address map in the device tree of nios2
On Sunday, September 13, 2015 at 10:32:10 AM, Thomas Chou wrote:
> Convert altera_jtag_uart to driver model.
>
> Signed-off-by: Thomas Chou
[...]
> -static int altera_jtag_serial_init(void)
> +static int altera_jtaguart_putc(struct udevice *dev, const char c)
> {
> - return 0;
> -}
> +
Simon,
2015-09-04 10:10 GMT+09:00 Simon Glass :
> On 31 August 2015 at 07:22, Simon Glass wrote:
>> On 31 August 2015 at 04:36, Masahiro Yamada
>> wrote:
>>> These properties are necessary to use full-featured pinctrl drivers
>>> in SPL.
>>>
>>> Signed-off-by: Masahiro Yamada
>>> ---
>>>
>>>
Hi Sergey,
On 13 September 2015 at 03:42, sergey kostanbaev
wrote:
> Hi Simon,
>
> I posted a patch http://patchwork.ozlabs.org/patch/516053/ to move this
> board to generic but still haven't got any feedback.
>
OK, sorry I missed it. Tom has applied this now so my patch will be dropped.
Regard
On 3 September 2015 at 11:54, Tom Rini wrote:
> Tested on my OMAP3 uEVM.
>
> Signed-off-by: Tom Rini
> ---
> include/configs/omap3_evm_common.h |1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Simon Glass
Build-tested also:
Tested-by: Simon Glass
_
On 3 September 2015 at 11:54, Tom Rini wrote:
> Tested on my TI186x rev E. (PG2.0) and take over maintainership.
>
> Signed-off-by: Tom Rini
> ---
> board/ti/ti816x/MAINTAINERS |2 +-
> include/configs/ti816x_evm.h |1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
Reviewed-by: Si
On 3 September 2015 at 11:54, Tom Rini wrote:
> Take over maintainership as well. Not tested as PG2.0 (which I have)
> needs additional work over PG1.0 (which Matt has).
>
> Cc: Matt Porter
> Signed-off-by: Tom Rini
> ---
> board/ti/ti814x/MAINTAINERS |2 +-
> include/configs/ti814x_evm.h
On Thu, Sep 03, 2015 at 11:12:20AM +0200, Simon Guinot wrote:
> From: Simon Guinot
>
> On the LaCie boards netspace_max_v2 and net2big_v2, two internal hard
> drives are available. Additionally on the d2net_v2 board, an extra hard
> drive can be plugged via eSATA.
>
> This patch updates CONFIG_
On Tue, Sep 01, 2015 at 07:01:02PM +0200, Simon Guinot wrote:
> From: Simon Guinot
>
> This patch enables generic board support for the following
> Kirkwood-based LaCie boards:
>
> - Network Space v2 (Mini, Lite and Max).
> - Internet Space v2.
> - D2 Network v2.
> - 2Big Network v2.
>
> Signe
On Thu, Sep 10, 2015 at 01:40:01AM +0300, Sergey Kostanbaev wrote:
> From: Sergey Kostanbaev
>
> Use CONFIG_SYS_GENERIC_BOARD in EDB93XX board family
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot
On Sun, Sep 13, 2015 at 11:22:15AM +0200, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 922f735ecf0de23eb0e01c208f5b422f39f6aed9:
>
> Merge git://git.denx.de/u-boot-usb (2015-09-12 15:50:02 -0400)
>
> are available in the git
As the device tree handlers in driver model does not
translate address across bridges, we would remove the
bridges in device tree and translate the reg address.
We want to use the same device tree for both u-boot
and linux. The ioremap() should be used to map the
address returned from dev_get_addr
Add ioremap() to map physical address to uncached virtual
address. We need this to convert the reg address from the
device tree.
The order of headers inclusion in interrupts.c is changed
because common.h will include board header that contains
IO_REGION_BASE.
In the future, the IO_REGION_BASE sho
Update the dts and convert altera_jtag_uart to driver model.
v2
add ioremap.
make the change to dts compatible with linux.
Thomas Chou (3):
nios2: map physical address to uncached virtual address
nios2: remove bridges in device tree
nios2: convert altera_jtag_uart to driver model
arch
Convert altera_jtag_uart to driver model.
Signed-off-by: Thomas Chou
---
arch/nios2/dts/3c120_devboard.dts | 5 ++
configs/nios2-generic_defconfig | 3 +
drivers/serial/Kconfig| 13
drivers/serial/altera_jtag_uart.c | 125 +-
include/co
Hi,
On 08-09-15 12:41, Philipp Rosenberger wrote:
The gd->malloc_ptr and the gd->malloc_limit are offsets to gd->malloc_base.
But the addr variable contains the absolute address. The new_ptr must be:
addr + bytes - gd->malloc_base.
Signed-off-by: Philipp Rosenberger
You're right, good catch:
Hi Marek,
> On Friday, September 11, 2015 at 11:45:28 PM, Lukasz Majewski wrote:
> > Hi Alexey,
>
> Hi,
>
> > > Hi Marek, Lukasz,
> > >
> > > > On Wednesday, September 09, 2015 at 09:01:30 AM, Lukasz Majewski
> > > >
> > > > wrote:
> > > > > Hi,
> > > > >
> > > > > > The commit: d9dbb97be0e4a
Hi Simon,
I posted a patch http://patchwork.ozlabs.org/patch/516053/ to move this
board to generic but still haven't got any feedback.
On Sat, Sep 12, 2015 at 8:50 PM, Simon Glass wrote:
> This board has not been converted to generic board by the deadline.
> Remove it.
>
> Signed-off-by: Simon
Hi Simon,
On Sun, Sep 13, 2015 at 5:06 AM, Simon Glass wrote:
> Hi Bin,
>
> I have a Galileo Gen 2 and am trying to get U-Boot to start on it. The
> first problem I have is that the schematic says the chip is a W25Q64FV
> which I think is an 8MB part, but the image produced is only 1MB.
Yes, the
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit 922f735ecf0de23eb0e01c208f5b422f39f6aed9:
Merge git://git.denx.de/u-boot-usb (2015-09-12 15:50:02 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch c
On 09/09/2015 14:26, Fabio Estevam wrote:
> Hi Peng and Stefano,
>
> On Wed, Sep 9, 2015 at 4:37 AM, Stefano Babic wrote:
>
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
>>>
>>> Can we keep this? Without this, we need to burn
On 08/09/2015 19:43, Fabio Estevam wrote:
> It is not very useful to have the message below on every boot
> (especially when we are using early silicon):
>
> U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300)
>
> CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
> CPU:
On 07/09/2015 08:59, Peng Fan wrote:
> Discard the 'select CPU_V7' from Kconfig in arch/arm/cpu/armv7/mx6
> for different targets, because ARCH_MX6 selects CPU_V7.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 07/09/2015 08:59, Peng Fan wrote:
> Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
> because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> Cc: Heiko Schocher
> Cc: Christian Gmeiner
> Cc: Stefan Roese
> Cc: Troy Kisky
On 06/09/2015 10:48, Nikita Kiryanov wrote:
> This series provides a fix necessary for early models of Utilite, a miniature
> desktop based on CM-FX6. It implements a dynamic modification to the device
> tree
> that is necessary for mmc boot.
>
> Cc: Stefano Babic
> Cc: Igor Grinberg
>
> Cha
On 06/09/2015 09:02, Peng Fan wrote:
> This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk,
> the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are:
> 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC.
> 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x
As the io space remapping ioremap() and bridge address
translation fdt_translate_address() are not usually used
in u-boot driver model by dev_get_addr(). We would better
convert the reg address map in the device tree of nios2
boards, so that it is io mapped and bridge translated.
Signed-off-by: Th
Convert altera_jtag_uart to driver model.
Signed-off-by: Thomas Chou
---
configs/nios2-generic_defconfig | 3 +
drivers/serial/Kconfig| 13
drivers/serial/altera_jtag_uart.c | 124 +-
include/configs/nios2-generic.h | 3 -
4 files cha
On 01/09/2015 05:03, Peng Fan wrote:
> We have CONFIG_MXC_OCOTP and CONFIG_CMD_FUSE in mx6_common.h,
> discard duplicated macro definitions in board header files.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> Cc: Peter Robinson
> Cc: Otavio Salvador
> ---
> include/configs/cgtqmx6eval.h
On 01/09/2015 05:03, Peng Fan wrote:
> This reverts commit 059323fb6a8f21637bb617919715c2427f24777c.
>
> This commit 059323fb6a8f21637bb617919715c2427f24777c use JESD79-3E which
> is not the newest spec. Should use JESD79-3F in which tRFC is 260ns for
> 4Gb chip.
>
> Signed-off-by: Peng Fan
>
On 03/09/2015 18:49, Adrian Alonso wrote:
> * Add i.MX7D SABRESD target board support with enabled modules:
> UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX.
>
> Build target: mx7dsabresd_config
>
> Signed-off-by: Peng Fan
> Signed-off-by: Fugang Duan
> Signed-off-by: Ye.Li
> Signed-
On 02/09/2015 20:54, Adrian Alonso wrote:
> Add imx-common cpu support for imx7d SoC
> - Update reset_cause for imx7d
> - Enable watchdog driver built for imx7d
>
> Signed-off-by: Adrian Alonso
> Signed-off-by: Peng Fan
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
==
On 02/09/2015 20:54, Adrian Alonso wrote:
> Rework imx_set_wdog_powerdown to be reused by imx6 and imx7
>
> Signed-off-by: Adrian Alonso
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software E
On 02/09/2015 20:54, Adrian Alonso wrote:
> Add imx7 SoC thermal driver support
>
> Signed-off-by: Adrian Alonso
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Ma
On 02/09/2015 20:54, Adrian Alonso wrote:
> Add imx7d basic SoC system support
> Misc arch dependent functions for system bring up
>
> Signed-off-by: Adrian Alonso
> Signed-off-by: Peng Fan
> Signed-off-by: Ye.Li
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
==
On 02/09/2015 20:54, Adrian Alonso wrote:
> Extend init_aips to support imx7 SoC, use is_soc_type
> and is_cpu_type to resolve at run time aips3 settings
>
> Signed-off-by: Adrian Alonso
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
==
On 02/09/2015 20:54, Adrian Alonso wrote:
> * Add Clock control module (CCM) support
> * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock
> root frequency generation denominated clock slices.
> Core clock slice: hihg speed clock for ARM core
> Bus clock slice: for bus clocks
On 02/09/2015 20:54, Adrian Alonso wrote:
> * Add system arch level header files
> - imx-regs.h: iMX7D SoC system architecture registers
> - crm_regs.h: Clock control module registers
> - sys_proto.h: helper callback function for SoC setup
>
> Signed-off-by: Adrian Alonso
> Signed-off-by:
On 02/09/2015 20:54, Adrian Alonso wrote:
> Add system counter driver for imx7d and mx6ul
> imx7 and imx6ul supports system counter timer as well as
> GPT timer (arch/arm/imx-common/timer.c); The default for
> imx7 is systemcounter timer.
>
> Signed-off-by: Ye.Li
> Signed-off-by: Adrian Alonso
On 02/09/2015 20:54, Adrian Alonso wrote:
> Rework imx_thermal driver to be used across i.MX
> processor that support thermal sensor
>
> Signed-off-by: Adrian Alonso
> Signed-off-by: Peng Fan
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
On 02/09/2015 20:54, Adrian Alonso wrote:
> Move common imx6 arch init setup, init.c can be extended
> and reused to support imx7 SoC keeping init arch common
> code.
>
> Signed-off-by: Adrian Alonso
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
On 02/09/2015 20:54, Adrian Alonso wrote:
> Rework cache settings for imx6, move cache configuration
> to imx-common/cache.c so it can be reused for newer SoC
>
> Signed-off-by: Adrian Alonso
> ---
> Changes for V2: Resend
> Changes for V3: Resend
>
> arch/arm/cpu/armv7/mx6/soc.c | 95 --
Hi Adrian,
thanks for pushing mx7 !
On 02/09/2015 20:54, Adrian Alonso wrote:
> Add helper macro is_soc_type to identify iMX SoC family
>
> Signed-off-by: Adrian Alonso
> ---
> Changes for V2: Rework for common sys_proto header file
> Changes for V3: Rework for latest master
>
> arch/arm/incl
On Sat, 2015-09-12 at 14:48 +0200, Hans de Goede wrote:
> I believe that the user having to have mkimage available (the calling
> of it can be scripted away) is not a big deal.
The fel tool could even call it automatically, couldn't it?
___
U-Boot mailin
91 matches
Mail list logo