Hi YanHong,
There are some errors when "make htmldocs".
I thought v4 was the final patch set and these are minor build errors,
so I have fixed them up on my side.
Now that since you are adding new defconfig and spinning a v5 patch set,
could you also fix those build errors that came from "make
On 2023/3/21 5:25, Conor Dooley wrote:
> On Thu, Mar 16, 2023 at 10:53:31AM +0800, Yanhong Wang wrote:
>> Add initial device tree for StarFive VisionFive v2 board.
>>
>> Signed-off-by: Yanhong Wang
>> Tested-by: Conor Dooley
>
> btw, are you running some sort of cc suppression argument to
>
On 2023/3/21 21:51, Andreas Schwab wrote:
> On Mär 21 2023, yanhong wang wrote:
>
>> Except for CONFIG_DEFAULT_DEVICE_TREE and CONFIG_DEFAULT_FDT_FILE,
>> 1.2a and 1.3b versions use the same config.
>>
>> Version 1.3b uses the following configuration:
>>
On 3/19/23 20:45, Marek Behún wrote:
On Sun, 19 Mar 2023 18:06:45 +0100
Marek Vasut wrote:
Replace PHY_INTERFACE_MODE_SGMII_2500 with PHY_INTERFACE_MODE_SGMII and
phydev->speed check where applicable. The PHY_INTERFACE_MODE_SGMII_2500
does not exist in Linux, so remove it from U-Boot too.
On 3/21/23 20:31, Tom Rini wrote:
Given efforts to add an m68k target to CI, build qemu for it.
Signed-off-by: Tom Rini
---
Cc: Marek Vasut
Reviewed-by: Marek Vasut
+CC Angelo too.
On Tue, 21 Mar 2023 at 15:42, Heinrich Schuchardt wrote:
>
> On 3/20/23 06:54, Masahisa Kojima wrote:
> > The FMP Payload Header which EDK2 capsule generation scripts
> > insert contains lowest supported version.
> > This commit reads the lowest supported version stored in the
> > "FmpState"
On Tue, 21 Mar 2023 at 15:30, Heinrich Schuchardt wrote:
>
> On 3/20/23 06:54, Masahisa Kojima wrote:
> > Firmware version management is not implemented in the current
> > FMP protocol.
> > EDK2 reference implementation capsule generation script inserts
> > the FMP Payload Header right before the
The TF-A blobs used to boot RK3568 and RK3588 boards is based on atf
v2.3. Mainline atf v2.3 contains an issue that could lead to a crash
when it fails to parse the fdt blob being passed as the platform param.
An issue that was fixed in atf v2.4.
The vendor TF-A seem to suffer from a similar
Add fdtoverlay_addr_r, kernel_comp_addr_r and imply use of
OF_LIBFDT_OVERLAY on RK3568 and RK3588 to support fdtoverlay
and kernel compression.
Signed-off-by: Jonas Karlman
Reviewed-by: Simon Glass
---
v2:
- Drop parts that convert to use bootstd
- Collect r-b tag
Running U-Boot from a SD-card on ROCK 5 Model B fails to load atf using
DMA and prints debug_uart messages.
U-Boot SPL 2023.04-rc3 (Mar 12 2023 - 00:30:16 +)
Trying to boot from MMC1
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ...
There is no support to initialize DRAM on RK3588 SoCs using U-Boot TPL
and instead an external TPL binary must be used to generate a bootable
u-boot-rockchip.bin image.
Enable ROCKCHIP_EXTERNAL_TPL by default for RK3588, add build steps for
RK3588 to documentation and clean up CONFIG_BINMAN_FDT
This series contains fixes for RK3568 and RK3588.
Patch 1 imply use of ROCKCHIP_TPL for RK3588 to generate bootable
firmware image.
Patch 2 fixes sdmmc boot on rk3588-rock-5b.
Patch 3 fixes boot of rk3568-rock-3a, an issue introduced in v1.
Patch 4 add fdtoverlay and compressed kernel addresses
This brings in the main SoC device tree used by the
Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x.
This is taken from the latest Linux kernel.
Cc: Rafał Miłecki
Signed-off-by: Linus Walleij
---
ChangeLog v1->v3:
- Bundle with the iproc nand and algo select patches
---
The original Northstar is an ARM SoC series that comprise
BCM4709x and BCM5301x and uses a dual-core Cortex A9, the
global timer and a few other things.
This series should not be confused with North Star Plus
(NSP) which is partly supported by U-Boot already.
The SoC is well supported by the
This adds a simple Northstar "BRCMNS" board to be used with
the BCM4709x and BCM5301x chips.
The main intention is to use this with the D-Link DIR-890L
and DIR-885L routers for loading the kernel into RAM from
NAND memory using the BCH-1 ECC and using the separately
submitted SEAMA load command,
Add support for the iproc Broadcom NAND controller,
used in Northstar SoCs for example. Based on the Linux
driver.
Cc: Philippe Reynes
Cc: Dario Binacchi
Acked-by: William Zhang
Reviewed-by: Michael Trimarchi
Signed-off-by: Linus Walleij
---
ChangeLog v2->v3:
- Collect William Zhang's ACK
-
For BRCMNAND with 1-bit BCH ECC (BCH-1) such as used on the
D-Link DIR-885L and DIR-890L routers, we need to explicitly
select the ECC like this in the device tree:
nand-ecc-algo = "bch";
nand-ecc-strength = <1>;
nand-ecc-step-size = <512>;
This is handled by the Linux kernel but U-Boot
This adds the device trees and minimal code needed to run
U-Boot on Broadcom Northstar SoCs.
This is needed to properly boot the D-Link DIR-890L router
as it refuse to directly boot compressed kernels bigger
than 2MB, and well our compressed kernel is bigger than
2MB so let's put in U-Boot.
On Fri, Feb 10, 2023 at 6:49 PM Tom Rini wrote:
> On Thu, Feb 02, 2023 at 12:37:45AM +0100, Linus Walleij wrote:
>
> > This adds a simple Northstar "BRCMNS" board to be used with
> > the BCM4709x and BCM5301x chips.
> >
> > The main intention is to use this with the D-Link DIR-890L
> > and
On Tue, Feb 28, 2023 at 08:34:20PM -0700, Simon Glass wrote:
> This is actually skipped at present due to the condition in the file.
> Fix this by running all vpl tests.
>
> Signed-off-by: Simon Glass
> ---
>
> .azure-pipelines.yml | 2 +-
> .gitlab-ci.yml | 2 +-
> 2 files changed, 2
On Tuesday 21 March 2023 20:56:02 Pali Rohár wrote:
> On Tuesday 21 March 2023 18:25:56 Pali Rohár wrote:
> > On Tuesday 21 March 2023 08:34:24 Martin Rowe wrote:
> > > On Mon, 20 Mar 2023 at 21:33, Pali Rohár wrote:
> > >
> > > > On Monday 20 March 2023 18:45:01 Pali Rohár wrote:
> > > > > On
On Tuesday 21 March 2023 18:25:56 Pali Rohár wrote:
> On Tuesday 21 March 2023 08:34:24 Martin Rowe wrote:
> > On Mon, 20 Mar 2023 at 21:33, Pali Rohár wrote:
> >
> > > On Monday 20 March 2023 18:45:01 Pali Rohár wrote:
> > > > On Monday 20 March 2023 12:01:03 Martin Rowe wrote:
> > > > > On
On 3/20/23 18:13, Ilias Apalodimas wrote:
Tom reports that compiling with LTO & EFI breaks armv7 and arm11*
builds. The reason is that LTO (maybe a binutils bug?) replaces the
asm version of allow_unaligned() with the __weak definition of the
function. As a result EFI code ends up running with
Given efforts to add an m68k target to CI, build qemu for it.
Signed-off-by: Tom Rini
---
Cc: Marek Vasut
---
tools/docker/Dockerfile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile
index fdcb0c7f3d29..2d94ed9fbacf 100644
Update to using the latest "Jammy" tag as our base.
Signed-off-by: Tom Rini
---
tools/docker/Dockerfile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile
index 2d94ed9fbacf..bd02531be249 100644
--- a/tools/docker/Dockerfile
+++
As this is now the stable release, move to using that now for our tests.
Signed-off-by: Tom Rini
---
.azure-pipelines.yml| 6 +++---
.gitlab-ci.yml | 4 ++--
tools/docker/Dockerfile | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/.azure-pipelines.yml
On Tue, Mar 21, 2023 at 03:39:16PM +0100, Michal Simek wrote:
> Would be good if you also create cover letter which I can reply.
> I have tested this series on Microblaze which is also using MANUAL
> relocation (but we are removing it from 2023.07 release) and it is working
> fine.
Agree that a
Replace PHY_INTERFACE_MODE_SFI with PHY_INTERFACE_MODE_5GBASER,
PHY_INTERFACE_MODE_10GBASER and PHY_INTERFACE_MODE_XAUI to match
Linux PHY interface modes.
Signed-off-by: Marek Vasut
---
Cc: "Ariel D'Alessandro"
Cc: "Marek Behún"
Cc: Joe Hershberger
Cc: Marek Vasut
Cc: Ramon Fried
Cc:
Synchronize PHY interface modes with Linux next 6.2.y commit:
0194b64578e90 ("net: phy: improve phy_read_poll_timeout")
Retain LX2160A/LX2162A PHY modes as those are not yet supported
by the Linux kernel, but isolate those with ifdeffery.
Isolate NCSI which are also not supported by Linux
This mode does not seem to be well defined and used anywhere, remove support
for it.
Based on discussion:
- 1000baseX does c37 AN of duplex+pause
- SGMII does AN of duplex+pause+speed, at lower speed bytes are repeated
10x/100x
- 2500baseX does not do AN, or does very different c73 AN
- SGMII
On Tuesday 21 March 2023 08:34:24 Martin Rowe wrote:
> On Mon, 20 Mar 2023 at 21:33, Pali Rohár wrote:
>
> > On Monday 20 March 2023 18:45:01 Pali Rohár wrote:
> > > On Monday 20 March 2023 12:01:03 Martin Rowe wrote:
> > > > On Sun, 19 Mar 2023 at 18:20, Pali Rohár wrote:
> > > >
> > > > > On
On Tue, Mar 14, 2023 at 02:16:27PM +0530, Venkatesh Yadav Abbarapu wrote:
> From: Algapally Santosh Sagar
>
> The baudrate configured in .config is taken by default by serial. If
> change of baudrate is required then the .config needs to changed and
> u-boot recompilation is required or the
This commit adds driver for iMX93 ADC.
The driver is implemented using driver model and provides
ADC uclass's methods for ADC single channel operations:
- adc_start_channel()
- adc_channel_data()
- adc_stop()
ADC features:
- channels: 4
- resolution: 12-bit
Signed-off-by:
iMX93 ADC features:
- 4 channels
- 12 bit resolution
Signed-off-by: Luca Ellero
---
configs/imx93_11x11_evk_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/imx93_11x11_evk_defconfig
b/configs/imx93_11x11_evk_defconfig
index 477fb25807..fa929dd4ec 100644
---
This node uses imx93_adc driver under drivers/adc.
The node is added keeping dts file in sync with iMX9 evk Linux
devicetree.
Signed-off-by: Luca Ellero
---
arch/arm/dts/imx93-11x11-evk.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/imx93-11x11-evk.dts
Add ADC support for NXP iMX93
Changes for v2:
- add "static" to functions
- enable ADC in iMX93 EVK
Changes for v3:
- split in 3 commits
- keep dts file in sync with Linux devicetree
- add comments to commits
Changes for v4:
- add imx93_adc_power_down() in imx93_adc_stop()
Changes for v5:
-
Hi Hari!
On March 21, 2023 thus sayeth Hari Nagalla:
> Introduce the basic j784s4 SoC dtbs from the linux kernel along with
> the new j784s4 specific pinmux definitions that we will use to generate
> the dtbs for the u-boot-spl and u-boot binaries.
>
We should probably specify which kernel
On Mon, Mar 20, 2023 at 11:51:26PM +0100, Marek Vasut wrote:
> A single reset controller driver (part of the clock driver) fix
> for v2023.04 release.
>
> The following changes since commit 318af47668aa2347ca9bbf2114cb9af1d8739aca:
>
> Merge branch 'master' of
>
On Tue, Mar 21, 2023 at 04:53:22PM +0100, Stefan Herbrechtsmeier wrote:
>
> Am 21.03.2023 um 16:35 schrieb Tom Rini:
> > On Tue, Mar 21, 2023 at 08:43:07AM +0100, Stefan Herbrechtsmeier wrote:
> > > Am 20.03.2023 um 18:01 schrieb Tom Rini:
> > > > On Fri, Mar 17, 2023 at 01:04:13PM +0100, Stefan
Am 21.03.2023 um 16:35 schrieb Tom Rini:
On Tue, Mar 21, 2023 at 08:43:07AM +0100, Stefan Herbrechtsmeier wrote:
Am 20.03.2023 um 18:01 schrieb Tom Rini:
On Fri, Mar 17, 2023 at 01:04:13PM +0100, Stefan Herbrechtsmeier wrote:
From: Stefan Herbrechtsmeier
Do not mangle lower or mixed case
On Tue, Mar 21, 2023 at 09:10:21AM -0500, Hari Nagalla wrote:
Please include at least the usual one line summary here.
[snip]
> diff --git a/include/configs/j784s4_evm.h b/include/configs/j784s4_evm.h
> new file mode 100644
> index 00..3e429fb036
> --- /dev/null
> +++
On Tue, Mar 21, 2023 at 09:10:20AM -0500, Hari Nagalla wrote:
> Introduce the base dts files needed for u-boot or to augment the linux
> dtbs for use in the u-boot-spl and u-boot binaries.
>
> Signed-off-by: Apurva Nandan
> Signed-off-by: Hari Nagalla
> ---
> arch/arm/dts/Makefile
On Sun, Mar 19, 2023 at 02:52:22PM +0800, Kever Yang wrote:
> Hi Tom,
>
> Please pull the fixes for rockchip platform:
> - Fix for rockchip timer driver;
> - Fix for rk3568 and rk3588 boot device and clock driver;
> - Fix for rk3568 reset handler;
> - Fix for rk3568 sdhci DLL at 52MHz;
>
> CI:
On Sat, Mar 18, 2023 at 05:52:50PM +0100, Marek Vasut wrote:
> The following changes since commit cefd0449d6df77eb0edb8a6800a441f9cd4e3653:
>
> Merge tag 'xilinx-for-v2023.07-rc1' of
> https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
> (2023-03-16 12:18:30 -0400)
>
> are
On Tue, Mar 21, 2023 at 08:43:07AM +0100, Stefan Herbrechtsmeier wrote:
> Am 20.03.2023 um 18:01 schrieb Tom Rini:
> > On Fri, Mar 17, 2023 at 01:04:13PM +0100, Stefan Herbrechtsmeier wrote:
> >
> > > From: Stefan Herbrechtsmeier
> > >
> > > Do not mangle lower or mixed case filenames which fit
On Tue, Mar 21, 2023 at 06:23:30PM +0530, Nikhil M Jain wrote:
> Move to using .env file for setting up environment variables for am65x.
>
> Signed-off-by: Nikhil M Jain
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On 3/21/23 14:01, Peter Hoyes wrote:
From: Peter Hoyes
64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced
the -q option for fdt addr, which sets the current working fdt address
without printing any output.
baf41410 "fdt: Show a message when the working FDT changes" made
Hi Simon and Tom,
On 3/14/23 09:46, Venkatesh Yadav Abbarapu wrote:
From: Algapally Santosh Sagar
The baudrate configured in .config is taken by default by serial. If
change of baudrate is required then the .config needs to changed and
u-boot recompilation is required or the u-boot
Bryan Brattlof writes:
> TI's security enforcing SoCs will authenticate each binary it loads by
> comparing it's signature with keys etched into the SoC during the boot
> up process. The am62ax family of SoCs by default will have some level of
> security enforcement checking. To keep things as
Hi,
On 3/19/23 18:02, Marek Vasut wrote:
These struct phy_driver ... instances are local to this source code
file, staticize them. No functional change.
Signed-off-by: Marek Vasut
---
Cc: "Ariel D'Alessandro"
Cc: "Cédric Le Goater"
Cc: "Marek Behún"
Cc: Alex Nemirovsky
Cc: Haolin Li
Cc:
On 3/21/23 9:10 AM, Hari Nagalla wrote:
Signed-off-by: Apurva Nandan
Signed-off-by: Bryan Bratloff
Signed-off-by: Nishant Menon
Signed-off-by: Hari Nagalla
---
arch/arm/mach-k3/Kconfig | 16 +-
arch/arm/mach-k3/Makefile | 2 +
Add support for J784S4 SoC.
Signed-off-by: Apurva Nandan
Signed-off-by: Hari Nagalla
---
arch/arm/mach-k3/j784s4/clk-data.c | 428 +
drivers/clk/ti/clk-k3.c| 6 +
include/k3-clk.h | 1 +
3 files changed, 435 insertions(+)
create
Introduce the basic j784s4 SoC dtbs from the linux kernel along with
the new j784s4 specific pinmux definitions that we will use to generate
the dtbs for the u-boot-spl and u-boot binaries.
Signed-off-by: Apurva Nandan
Signed-off-by: Hari Nagalla
---
arch/arm/dts/k3-j784s4-evm.dts |
Signed-off-by: Apurva Nandan
Signed-off-by: Bryan Bratloff
Signed-off-by: Nishant Menon
Signed-off-by: Hari Nagalla
---
arch/arm/mach-k3/Kconfig | 16 +-
arch/arm/mach-k3/Makefile | 2 +
arch/arm/mach-k3/arm64-mmu.c | 41 +++
Add support for DDR subsystem in J784S4 SoC.
Signed-off-by: Apurva Nandan
Signed-off-by: Hari Nagalla
---
drivers/ram/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index e085119963..fac8c9314b 100644
---
Add support for DMA in J784S4 SoC.
Signed-off-by: Apurva Nandan
Signed-off-by: Hari Nagalla
---
drivers/dma/ti/Makefile | 1 +
drivers/dma/ti/k3-psil-j784s4.c | 166 ++
drivers/dma/ti/k3-psil-priv.h | 1 +
drivers/dma/ti/k3-psil.c
Add board support for J784S4 SoC.
Signed-off-by: Hari Nagalla
---
board/ti/j784s4/Kconfig | 61 +
board/ti/j784s4/MAINTAINERS | 7 +
board/ti/j784s4/Makefile | 8 ++
board/ti/j784s4/evm.c| 105 +++
configs/j784s4_evm_a72_defconfig | 213
Add support for J784S4 SoC Identification.
Signed-off-by: Hari Nagalla
---
drivers/soc/soc_ti_k3.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/soc/soc_ti_k3.c b/drivers/soc/soc_ti_k3.c
index 8af0ac7051..caf8db9574 100644
--- a/drivers/soc/soc_ti_k3.c
+++
Hello Everyone!
This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.
The J784S4 SoC device tree patches are taken from kernel patch submissions
and will be updated as they are accepted and merged to the kernel tree.
All other patches are specific to
Add support for J784S4 SoC.
Signed-off-by: Apurva Nandan
Signed-off-by: Hari Nagalla
---
drivers/power/domain/ti-power-domain.c | 6 ++
include/k3-dev.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/power/domain/ti-power-domain.c
There are 4 instances of SERDES modules, with each instance supporting 4
lanes.
Signed-off-by: Matthew Ranostay
Signed-off-by: Hari Nagalla
---
include/dt-bindings/mux/ti-serdes.h | 62 +
1 file changed, 62 insertions(+)
diff --git
On 3/21/23 13:58, Patrick Delaunay wrote:
Remove test on CONFIG_LMB_MEMORY_REGIONS introduced by commit
7c1860fce4e3 ("lmb: Fix lmb property's defination under struct lmb").
This code in lmb_init() is strange, because if CONFIG_LMB_USE_MAX_REGIONS
and CONFIG_LMB_MEMORY_REGIONS are not
On Mär 21 2023, yanhong wang wrote:
> Except for CONFIG_DEFAULT_DEVICE_TREE and CONFIG_DEFAULT_FDT_FILE,
> 1.2a and 1.3b versions use the same config.
>
> Version 1.3b uses the following configuration:
> CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b"
>
On 3/20/23 19:39, Simon Glass wrote:
Hi Heinrich,
On Mon, 20 Mar 2023 at 09:58, Heinrich Schuchardt
wrote:
On 3/19/23 20:29, Simon Glass wrote:
Hi Heinrich,
On Mon, 20 Mar 2023 at 04:25, Heinrich Schuchardt
wrote:
EFI device paths for block devices must be unique. If a non-unique
> On 20 Mar 2023, at 10:40 pm, Simon Glass wrote:
>
> Hi Christian,
>
> On Tue, 21 Mar 2023 at 06:05, Christian Hewitt
> wrote:
>>
>> Improve documentation.
>>
>> Signed-off-by: Christian Hewitt
>> ---
>> doc/board/amlogic/wetek-core2.rst | 83 +--
>> 1 file
From: Peter Hoyes
64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced
the -q option for fdt addr, which sets the current working fdt address
without printing any output.
baf41410 "fdt: Show a message when the working FDT changes" made the
utility function
Remove test on CONFIG_LMB_MEMORY_REGIONS introduced by commit
7c1860fce4e3 ("lmb: Fix lmb property's defination under struct lmb").
This code in lmb_init() is strange, because if CONFIG_LMB_USE_MAX_REGIONS
and CONFIG_LMB_MEMORY_REGIONS are not defined, the implicit #else is empty
and the required
Add the max number of region in lmb dump; this patch allows to
check the limit for usage of the LMB regions, memory or reserved.
Result on STM32MP157C-DK2:
STM32MP> bdinfo
.
lmb_dump_all:
memory.cnt = 0x1 / max = 0x2
memory[0] [0xc000-0xdfff], 0x2000 bytes flags: 0
Move to using .env file for setting up environment variables for am65x.
Signed-off-by: Nikhil M Jain
---
board/ti/am65x/am65x.env| 47 +
include/configs/am65x_evm.h | 68 -
2 files changed, 47 insertions(+), 68 deletions(-)
create
> -Original Message-
> From: Alexander Kochetkov
> Sent: 2023年3月21日 17:50
> To: Bough Chen
> Cc: h...@denx.de; ma...@denx.de; u-boot@lists.denx.de; dl-uboot-imx
> ; xypron.g...@gmx.de; Simon Glass
>
> Subject: Re: [PATCH] i2c: correct I2C deblock logic
>
> Hi Haibo.
>
> Nice catch!
Hi Haibo.
Nice catch! Agree with you patch. But may be fix problem in general?
I suggest to add GPIOD_ACTIVE_LOW to the GPIOD_MASK_DIR mask to fix problems 1,
2, 4.
Not sure if that logically correct. What do you think?
I grepped the code for ‘dm_gpio_set_dir_flags’ and found another places
> -Original Message-
> From: Alexander Kochetkov
> Sent: 2023年3月20日 16:03
> To: h...@denx.de
> Cc: Bough Chen ; ma...@denx.de;
> u-boot@lists.denx.de; dl-uboot-imx ;
> xypron.g...@gmx.de; Simon Glass
> Subject: Re: [PATCH] i2c: correct I2C deblock logic
>
> Hello!
>
> The patch doesn’t
On Mon, 20 Mar 2023 at 21:33, Pali Rohár wrote:
> On Monday 20 March 2023 18:45:01 Pali Rohár wrote:
> > On Monday 20 March 2023 12:01:03 Martin Rowe wrote:
> > > On Sun, 19 Mar 2023 at 18:20, Pali Rohár wrote:
> > >
> > > > On Sunday 19 March 2023 17:47:57 Pali Rohár wrote:
> > > > > On Sunday
On Tuesday 21 March 2023 08:03:45 Martin Rowe wrote:
> On Mon, 20 Mar 2023 at 19:42, Pali Rohár wrote:
>
> > On Monday 20 March 2023 12:01:03 Martin Rowe wrote:
> > > Dedicated UART still works, patching an MMC for UART with kwboot still
> > > hangs after finishing transfer; no change.
> >
> >
On Tuesday 21 March 2023 08:01:16 Martin Rowe wrote:
> On Mon, 20 Mar 2023 at 17:33, Pali Rohár wrote:
>
> > On Monday 20 March 2023 11:48:59 Martin Rowe wrote:
> > > On Sun, 19 Mar 2023 at 16:22, Pali Rohár wrote:
> > >
> > > > On Sunday 19 March 2023 00:32:01 Martin Rowe wrote:
> > > > > On
On Mon, 20 Mar 2023 at 19:42, Pali Rohár wrote:
> On Monday 20 March 2023 12:01:03 Martin Rowe wrote:
> > Dedicated UART still works, patching an MMC for UART with kwboot still
> > hangs after finishing transfer; no change.
>
> One more question. Did you set boot mode HW switches to UART
On Mon, 20 Mar 2023 at 17:33, Pali Rohár wrote:
> On Monday 20 March 2023 11:48:59 Martin Rowe wrote:
> > On Sun, 19 Mar 2023 at 16:22, Pali Rohár wrote:
> >
> > > On Sunday 19 March 2023 00:32:01 Martin Rowe wrote:
> > > > On Mon, 6 Mar 2023 at 11:53, Pali Rohár wrote:
> > > >
> > > > > Could
Am So., 4. Dez. 2022 um 22:22 Uhr schrieb Pierre-Clément Tosi
:
>
> Hi,
>
> On Fri, Dec 02, 2022 at 08:38:37PM +0100, s...@geanix.com wrote:
> >
> > Quoting Pierre-Clément Tosi :
> >
> > > Add a check for calloc() failing to allocate the requested memory.
> > >
> > > Make decode_regions() return
Am 20.03.2023 um 18:01 schrieb Tom Rini:
On Fri, Mar 17, 2023 at 01:04:13PM +0100, Stefan Herbrechtsmeier wrote:
From: Stefan Herbrechtsmeier
Do not mangle lower or mixed case filenames which fit into the upper
case 8.3 short filename. This ensures FAT standard compatible short
filenames
On 3/20/23 06:54, Masahisa Kojima wrote:
The FMP Payload Header which EDK2 capsule generation scripts
insert contains lowest supported version.
This commit reads the lowest supported version stored in the
"FmpState" EFI non-volatile variable, then check if the
firmware version of ongoing
On 3/20/23 06:54, Masahisa Kojima wrote:
Firmware version management is not implemented in the current
FMP protocol.
EDK2 reference implementation capsule generation script inserts
the FMP Payload Header right before the payload, it contains the
firmware version and lowest supported version.
81 matches
Mail list logo