On 5/28/24 09:18, Ilias Apalodimas wrote:
> commit 6e2228fb052b ("Merge patch series "Clean up arm linker scripts")
> was cleaning up linker scripts for armv7 and v8 but was leaving
> _end and __secure_stack_start/end.
>
> commit d0b5d9da5de2 ("arm: make _end compiler-generated")
> was moving
On 3/27/24 15:32, Chris Morgan wrote:
> On Wed, Mar 27, 2024 at 06:32:06PM +0800, Kever Yang wrote:
>> Hi Chris,
>>
>> The ATAGS is used for passing parameter from bootloader to kernel at
>> first, which has been replaced by DTB now for ARM platform.
>>
>> And Rockchip using ATAGs for
Hello Tom,
Please pull tag u-boot-at91-2024.07-a , the first set of at91
features for the next cycle 2024.07 .
This feature set includes a new board named sama7g54 Curiosity.
Thanks,
Eugen
The following changes since commit 20a0ce574d6642e0dfe651467159039fac48cc4f:
Merge tag 'v2024.04-rc4'
On 3/11/24 17:23, Alexander Dahl wrote:
> Hello raw NAND fans,
>
Hello Alexander,
Thank you for your efforts
> today I thought it would be interesting to have all that automatic NAND
> flash timings setting usable with an old board featuring a at91sam9g20
> SoC, which would pave the way to get
On 3/18/24 10:09, mihai.s...@microchip.com wrote:
> On 3/7/24 11:10, Alexander Dahl wrote:
>> For now adds one new command 'hsmc' with a single subcommand 'decode'
>> to read and display the content of the registers of the Static Memory
>> Controllers (SMC/HSMC) found in different at91 SoCs.
On 2/27/24 15:43, Mihai Sain wrote:
> This patch series adds initial support for Microchip SAMA7G54 Curiosity board.
>
> Changes in v2:
> --
>
> * Update flexcom 10 node in order to match previous flexcom definitions.
> * Sort in alphabetical order all nodes and pinctrl.
> * Remove
On 3/7/24 11:10, Alexander Dahl wrote:
> For now adds one new command 'hsmc' with a single subcommand 'decode' to
> read and display the content of the registers of the Static Memory
> Controllers (SMC/HSMC) found in different at91 SoCs. Needed to get a
> better picture on what raw nand core and
On 3/5/24 04:10, Trevor Woerner wrote:
> Following the pattern of other Rockchip devices, enable the U-Boot
> environment to be stored in MMC. This patch specifically assumes the
> environment will be stored on the SDcard.
>
> Signed-off-by: Trevor Woerner
> ---
>
Hello Jonas,
On 2/5/24 14:34, Jonas Karlman wrote:
> Hi Quentin,
>
> On 2024-02-05 11:49, Quentin Schulz wrote:
>> Hi Jonas,
>>
>> On 2/2/24 01:12, Jonas Karlman wrote:
>>> Add support to reset to bootrom download mode on hang in U-Boot SPL and
>>> proper. ROCKCHIP_HANG_TO_BROM can be used to
Hello Tom,
Please pull tag u-boot-at91-2024.04-a , the first set of at91 features
for 2024.04 cycle.
This set includes some DT alignments and solves a compile issue for custom nand
defconfigs.
Thanks,
Eugen
The following changes since commit 3c04fcf3137d5f694d52b8f355373e4baabe5f78:
Merge
On 1/27/24 00:14, Jonas Karlman wrote:
> Add a default u-boot,spl-boot-order prop to rk3588s-u-boot.dtsi and
> remove the prop from board u-boot.dtsi files using the default value.
>
> Signed-off-by: Jonas Karlman
Reviewed-by: Eugen Hristev
> ---
> arch/arm/dts/rk3588-nan
Hi Jonas,
On 1/27/24 01:26, Jonas Karlman wrote:
> Writing to eMMC using DDR52 mode does not work reliably or at all on
> RK356x and RK3588 boards.
>
This is related to the old issue I encountered last year with mmc write?
Thanks,
Eugen
> Fix this by removing the mmc-ddr-1_8v prop from
FIG_DM_NAND_ATMEL=y
> CONFIG_SYS_NAND_ONFI_DETECTION=y
> CONFIG_PHY_SMSC=y
> CONFIG_MACB=y
>
> Hope the changes are acceptable nevertheless. The last patch has a
> trivial fix for the new atmel raw nand driver which I came up with while
> working on this.
>
> Gr
On 12/19/23 18:39, Alexander Dahl wrote:
> Hello Eugen,
>
> Am Tue, Dec 19, 2023 at 04:32:07PM +0200 schrieb Eugen Hristev:
>> On 12/12/23 18:04, Alexander Dahl wrote:
>>> These removed definitions were specific to some sam9 SoCs, but not
>>> generic over all at9
On 12/12/23 18:04, Alexander Dahl wrote:
> These removed definitions were specific to some sam9 SoCs, but not
> generic over all at91 SoCs. The correct SoC specific definitions for
> ATMEL_BASE_PMECC are spread over different header files in
> arch/arm/mach-at91/include/mach directory.
>
> Fixes
On 11/23/23 07:22, Tom Fitzhenry wrote:
I am able to reproduce this on RK3588 QuartzPro64.
I cannot reproduce on the vendor u-boot, used on stock RK3588
QuartzPro64. That works fine.
I thought "[PATCH v2 RESEND] mmc: dw_mmc: reset controller after data
error"[0] might fix this, but after
On 11/17/23 15:46, Tom Rini wrote:
On Fri, Nov 17, 2023 at 03:45:02PM +0200, Eugen Hristev wrote:
On 11/17/23 15:40, Tom Rini wrote:
On Sat, 04 Nov 2023 22:27:42 -0400, Sean Anderson wrote:
Several AT91 boards are quite close to their SPL size limit. For example,
sama5d27_wlsom1_ek_mmc
On 11/17/23 15:40, Tom Rini wrote:
On Sat, 04 Nov 2023 22:27:42 -0400, Sean Anderson wrote:
Several AT91 boards are quite close to their SPL size limit. For example,
sama5d27_wlsom1_ek_mmc is just 173 bytes short of its limit and doesn't
even fit with older GCCs.
All AT91 processors should
On 11/17/23 11:15, mihai.s...@microchip.com wrote:
Hi Eugen,
I built new binaries with CONFIG_SYS_THUMB_BUILD=y for sam9x60_curiosity,
sama5d29_curiosity, sama7g5ek and new sam9x75_curiosity board.
I used the latest u-boot/master branch for this test.
I noticed that the file size of the
On 11/16/23 20:47, Tom Rini wrote:
On Sat, Nov 04, 2023 at 10:27:42PM -0400, Sean Anderson wrote:
Several AT91 boards are quite close to their SPL size limit. For example,
sama5d27_wlsom1_ek_mmc is just 173 bytes short of its limit and doesn't
even fit with older GCCs.
All AT91 processors
| 3 +--
fs/ubifs/ubifs.h | 1 -
28 files changed, 32 insertions(+), 62 deletions(-)
Reviewed-by: Eugen Hristev #at91
On 9/26/23 09:13, durai.manicka...@microchip.com wrote:
On 22/09/23 12:30, Alexander Dahl wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the
content is safe
Hello Durai,
Am Thu, Sep 21, 2023 at 10:36:27PM +0530 schrieb Durai Manickam KR:
This patch series
Hello Tom,
Please pull tag u-boot-at91-2024.01-b , the second set of at91 features
for 2024.01 cycle.
This feature set a new board named Conclusive KSTR sama5d27 with some
small prerequisites patches.
Thanks,
Eugen
The following changes since commit
On 10/18/23 17:00, Artur Rojek wrote:
Hi all,
this is v5 of the Conclusive KSTR-SAMA5D27 support series.
Patches [1/4], [2/4] and [3/4] remain unchanged.
In patch [4/4], a new dtsi file has been added in order to keep U-Boot
specific properties separate from the main dts. As such, MAINTAINERS
On 10/16/23 22:30, Tom Rini wrote:
On Mon, Oct 16, 2023 at 08:34:16AM +0200, Michal Simek wrote:
On 10/13/23 17:15, Tom Rini wrote:
On Fri, Oct 13, 2023 at 11:11:04AM -0400, Da Xue wrote:
On Fri, Oct 13, 2023 at 7:47 AM Marek Vasut wrote:
On 10/13/23 06:53, Venkatesh Yadav Abbarapu
Hello Artur,
On 10/9/23 17:41, Artur Rojek wrote:
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama
Signed-off-by: Jakub Klama
Co-developed-by: Marcin Jabrzyk
Signed-off-by: Marcin Jabrzyk
Signed-off-by: Artur Rojek
---
v4: - utilize
Hello Tom,
Please pull tag u-boot-at91-fixes-2023.10-b , the second set of fixes
for 2023.10 cycle.
This comes late, but I hope you can merge it before the release, it's
only two small fixes , one for an array not initialized and the second
one fixes an error case when a DT property is
On 9/24/23 12:58, Francois Berder wrote:
Arrays are not cleared entirely because ARRAY_SIZE
returns the number of elements in an array, not the size
in bytes.
This commit fixes the calls to memset by providing the
array size in bytes instead of the number of elements
in the array.
On 9/23/23 19:50, Michael Nazzareno Trimarchi wrote:
On Fri, Sep 22, 2023 at 11:40 AM Eugen Hristev
wrote:
On 9/22/23 12:08, Alexander Dahl wrote:
Adapt behaviour to Linux kernel driver.
The return value of gpio_request_by_name_nodev() was not checked before,
and thus in case 'rb-gpios
On 9/25/23 22:31, Artur Rojek wrote:
Hey Eugen,
thanks for the review.
Hello,
Thank you for your patch,
On 9/21/23 18:37, Artur Rojek wrote:
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama
Signed-off-by: Jakub Klama
Co-developed-by:
On 9/27/23 01:15, Sean Anderson wrote:
Hi Eugen,
I noticed that several AT91 boards are quite close to their SPL size
limit. For example, sama5d27_wlsom1_ek_mmc is just 173 bytes short of
its limit and doesn't even git with older GCCs. I looked at the
datasheet for that processor, and noticed
On 9/22/23 03:48, Kever Yang wrote:
On 2023/9/21 22:47, Eugen Hristev wrote:
On 8/1/23 10:28, Eugen Hristev wrote:
This series adds support for DFU in SPL for rockchip rk3588 on rock5b
board.
Namely, when SPL is loaded via rockusb (thus via USB), having the
`same-as-spl` boot order item
sed.
Fixes: 6a8dfd57220d ("nand: atmel: Add DM based NAND driver")
Signed-off-by: Alexander Dahl
---
Reviewed-by: Eugen Hristev
Notes:
v1 -> v2:
- Only issue error message if error is not ENOENT. If the node just is
missing, move on without error message
Hello,
Thank you for your patch,
On 9/21/23 18:37, Artur Rojek wrote:
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama
Signed-off-by: Jakub Klama
Co-developed-by: Marcin Jabrzyk
Signed-off-by: Marcin Jabrzyk
Signed-off-by: Artur Rojek
---
On 6/19/23 13:33, Eugen Hristev wrote:
From: Ziyuan Xu
Per dw_mmc databook, it's recommended to reset the host controller if
some data-related error occurred.
Implement a reset mechanism.
Signed-off-by: Ziyuan Xu
Co-developed-by: Jason Zhu
Signed-off-by: Jason Zhu
[eugen.hris
On 6/19/23 13:47, Eugen Hristev wrote:
The second parameter for clk_release_all is used as an unsigned
(which makes sense) but the function prototype declares it as an int.
This causes warnings/error like such below:
include/clk.h:422:48: error: conversion to ‘int’ from ‘unsigned int’ may
On 8/1/23 10:28, Eugen Hristev wrote:
This series adds support for DFU in SPL for rockchip rk3588 on rock5b
board.
Namely, when SPL is loaded via rockusb (thus via USB), having the
`same-as-spl` boot order item, after having detected that it was loaded
from USB, it will lookup the gadget USB
Hello Tom,
Please pull tag u-boot-at91-2023.10-a , the first set of at91
features for the next cycle 2023.10 .
This feature set includes a new board sama5d29 Curiosity, and various
fixes and alignments for sam9x60 and sam9x60 curiosity board.
Thanks,
Eugen
The following changes since
On 8/23/23 16:58, Alexander Dahl wrote:
Hei hei,
while working with the sam9x60-curiosity board I noticed some things
still have rough edges on U-Boot shell for that device. With these
patches (and some more config options enabled), the following commands
now work as expected: reset, led,
On 8/28/23 13:53, Michal Simek wrote:
Hi Eugen, + Chanho,
On 8/8/23 12:22, Eugen Hristev wrote:
In case CC_OPTIMIZE_FOR_DEBUG is set, unused code will not be
optimized out,
hence the reference to fpga_load will be compiled.
if DM_FPGA and SPL_FPGA are not set, the build will fail
On 8/28/23 03:21, Chanho Park wrote:
Hi,
-Original Message-
From: Michal Simek
Sent: Friday, August 25, 2023 4:23 PM
To: Chanho Park ; u-boot@lists.denx.de
Subject: Re: [PATCH] fpga: define dummy fpga_load function for debug build
Hi,
On 8/16/23 08:54, Chanho Park wrote:
This fixes
On 8/25/23 10:21, Michal Simek wrote:
Hi,
On 8/8/23 12:22, Eugen Hristev wrote:
In case CC_OPTIMIZE_FOR_DEBUG is set, unused code will not be
optimized out,
hence the reference to fpga_load will be compiled.
if DM_FPGA and SPL_FPGA are not set, the build will fail with :
aarch64-none-linux
On 8/8/23 16:48, Michael Nazzareno Trimarchi wrote:
Hi
On Tue, Aug 8, 2023 at 3:03 PM Alexander Dahl wrote:
Signed-off-by: Alexander Dahl
Reviewed-by: Michael Trimarchi
Applied this one patch to u-boot-at91/next , thanks !
On 8/23/23 09:54, Michael Nazzareno Trimarchi wrote:
Hi
On Wed, Aug 23, 2023 at 8:28 AM Eugen Hristev
wrote:
Hi,
On 8/8/23 18:03, Alexander Dahl wrote:
Hello Michael,
Am Tue, Aug 08, 2023 at 03:49:45PM +0200 schrieb Michael Nazzareno Trimarchi:
Hi
On Tue, Aug 8, 2023 at 3:03 PM
Hi,
On 8/8/23 18:03, Alexander Dahl wrote:
Hello Michael,
Am Tue, Aug 08, 2023 at 03:49:45PM +0200 schrieb Michael Nazzareno Trimarchi:
Hi
On Tue, Aug 8, 2023 at 3:03 PM Alexander Dahl wrote:
Adapt behaviour to Linux kernel driver.
The return value of gpio_request_by_name_nodev() was not
deletions(-)
For rock5,
Acked-by: Eugen Hristev
/MAINTAINERS | 1 +
board/rockchip/evb_rk3568/MAINTAINERS | 4
3 files changed, 6 insertions(+)
For rock5,
Acked-by: Eugen Hristev
On 8/16/23 16:42, Alexander Dahl wrote:
Hei hei,
Am Wed, Aug 16, 2023 at 03:48:25PM +0300 schrieb Eugen Hristev:
Hi Alexander,
On 8/9/23 17:16, Alexander Dahl wrote:
Since commit 61040097a9d1 ("reset: at91: Add reset driver for basic
assert/deassert operations") the compatible
Hi Alexander,
On 8/9/23 17:16, Alexander Dahl wrote:
Copied as is from Linux Kernel. Works out of the box if the following
config options are enabled: CONFIG_BUTTON, CONFIG_BUTTON_GPIO,
CONFIG_CMD_BUTTON, CONFIG_DM_GPIO.
Can you please indicate the Linux commit which was picked,
thanks !
Hi Alexander,
On 8/9/23 17:16, Alexander Dahl wrote:
Copied dts pieces from Linux Kernel. Support is optional for now, to
make it work the following options have to be enabled: CONFIG_LED,
CONFIG_LED_GPIO, CONFIG_CMD_LED.
Signed-off-by: Alexander Dahl
---
Hi Alexander,
On 8/9/23 17:16, Alexander Dahl wrote:
Since commit 61040097a9d1 ("reset: at91: Add reset driver for basic
assert/deassert operations") the compatible "microchip,sam9x60-rstc" for
the sam9x60 reset controller in sam9x60.dtsi is not handled by
CONFIG_SYSRESET_AT91 anymore, but by
Hi Alexander,
On 8/9/23 17:16, Alexander Dahl wrote:
The board has two SD card slots and we have two defconfigs for booting
from either the first (micro SD) named 'sam9x60_curiosity_mmc_defconfig'
or the second (full size SD) named 'sam9x60_curiosity_mmc1_defconfig'.
For comparable Microchip
On 8/12/23 05:53, Kever Yang wrote:
Hi Eugen,
On 2023/8/1 15:28, Eugen Hristev wrote:
Add bootph-all to gadget nodes to have the gadget available in SPL.
Does this gadget available on both USB2 and USB3? I think only USB2 is
enough?
Hi Kever,
This board has one USB type C
Added Mihai who tested this a lot at some point in time
Eugen
On 8/8/23 16:02, Alexander Dahl wrote:
Hello everyone,
this is a patch series wtih some real fixes _and_ a question or some
kind of support request in the cover letter. I would be happy if anyone
could read the cover letter
Hi Frank,
On 8/8/23 11:09, Frank Wunderlich wrote:
From: Frank Wunderlich
Add Bananapi R2 Pro board.
Signed-off-by: Frank Wunderlich
---
because iodomain is different to evb and now iodomain driver is sent as
patch we need to separate between EVB and R2Pro else board can be bricked.
---
v2:
/spl/spl_fit.c:595: undefined reference to `fpga_load'
To solve this, added an inline empty stub in the header if
CC_OPTIMIZE_FOR_DEBUG is set such that the build will succeed.
Signed-off-by: Eugen Hristev
---
Changes in v3:
- return -ENOSYS
Changes in v2:
- this is a rework as suggested by Simon
Hi Jonas,
Thank you for your work,
On 8/7/23 03:08, Jonas Karlman wrote:
Add a new glue driver for Rockchip SoCs, i.e RK3568, with a GMAC based
on Synopsys DWC Ethernet QoS IP.
rk_gmac_ops was ported from linux commit:
3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support")
On 7/24/23 14:35, Mihai Sain wrote:
Add initial support for sama5d29_curiosity board.
Hardware:
SoC: SAMA5D29 500 MHz
DRAM: LPDDR2 512 MiB
PMIC: MCP16502
Debug: UART0
Flash: QSPI NOR 8 MiB
RGB LCD connector
Mikrobus connectors x 2
SD-Card connectors x 2
USB 2.0 x 2
Changes in v2:
The version
With this change the DT and binding files are under the at91 tree
maintainer, and get_maintainer.pl correctly reports the entry.
Signed-off-by: Eugen Hristev
---
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 47581cf6fbb8..23d1d232a415
commented on
this, but the result was just that the 'clock not found' message was
removed.
I am happy that you found some time to do these changes
Reviewed-by: Eugen Hristev
On 7/5/23 23:16, Alexander Dahl wrote:
Hello everyone,
currently I have the Microchip SAM9X60-Curiosity board on my desk and
for evaluation purposes I'm trying to get it booting from NAND flash
without SD card. This series contains a collection of patches I made on
that journey. It's probably
Hi Alexis,
On 8/1/23 10:09, Alexis Lothoré wrote:
Hi,
I am currently using an ATSAMA5D27-WLSOM1-EK1. This boards embeds an
ATSAMA5D27-WLSOM1, which in turns holds an ATSAMA5D27 and a 8MB QSPI flash. I
have been wanting to program u-boot in the QSPI flash thanks to DFU, since the
board is able
Enable DFU and related configs, expand stack and buffers to hold
downloaded image.
Signed-off-by: Eugen Hristev
---
Changes in v2:
- added # CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
because with the configs enabled here, this is automatically set as =y
and this causes a build failure
Prepare env variables for DFU
Signed-off-by: Eugen Hristev
---
include/configs/rk3588_common.h | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/include/configs/rk3588_common.h b/include/configs/rk3588_common.h
index 46389d087d29..48414fe946a0 100644
--- a/include
In case SPL was booted from USB, add the gadget as the boot device
for the 'same-as-spl' boot order next device.
Signed-off-by: Eugen Hristev
---
arch/arm/mach-rockchip/rk3588/rk3588.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c
b/arch/arm/mach
Add DFU as a possible SPL boot media if the boot device is a
gadget device.
Signed-off-by: Eugen Hristev
---
arch/arm/mach-rockchip/spl-boot-order.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-rockchip/spl-boot-order.c
b/arch/arm/mach-rockchip/spl-boot-order.c
index
-by: Wesley Cheng
Link: https://lore.kernel.org/r/20220901193625.8727-4-quic_wch...@quicinc.com
Cherry-picked from Linux: 461ee467507c ("usb: dwc3: Increase DWC3 controller
halt timeout")
Signed-off-by: Eugen Hristev
---
Not to be merged, I know Marek does not apply any patches to DWC3.
driver
Add bootph-all to gadget nodes to have the gadget available in SPL.
Signed-off-by: Eugen Hristev
---
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
index
From: Venkatesh Yadav Abbarapu
[ Nguyen/Greg: Ported from Linux kernel commit
f4fd84ae0765a ("usb: dwc3: core: Only handle soft-reset in DCTL") ]
Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
From: Venkatesh Yadav Abbarapu
[ Nguyen/Felipe/Greg: Ported from Linux kernel commit
5b738211fb59 ("usb: dwc3: gadget: Don't send
unintended link state change") ]
DCTL.ULSTCHNGREQ is a write-only field. When doing a read-modify-write
to DCTL, the driver
arapu
[eugen.hris...@collabora.com: keep the PHY resets code]
Signed-off-by: Eugen Hristev
---
Not to be merged, I know Marek does not apply any patches to DWC3.
drivers/usb/dwc3/core.c | 31 +++
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/dwc
:
[...]
Environment in SPL is needed e.g. for DFU, as dfu_alt is kept as
env variable.
Signed-off-by: Eugen Hristev
---
include/configs/rockchip-common.h | 4
1 file changed, 4 deletions(-)
diff --git a/include/configs/rockchip-common.h
b/include/configs/rockchip-common.h
index 9121bba37384
/hardware-enablement/rockchip-3588/u-boot
Thanks!
Changes in v2:
- rebased on latest upstream which caused a change in the config patch.
Eugen Hristev (7):
rockchip: allow env defines for SPL build
usb: dwc3: Increase DWC3 controller halt timeout
ARM: dts: rockchip: rk3588-rock-5b-u-boot
This duplicate/stray line was probably added during a rebase.
Remove it
Fixes: 0a3a5746c385 ("board: rockchip: Add Edgeble Neural Compute Module 6B")
Signed-off-by: Eugen Hristev
---
arch/arm/mach-rockchip/rk3588/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mac
From: Sergiu Moga
In order to have USB functionality, drivers for SAMA7's
USB 2.0 PHY's have been added. There is one driver
for UTMI clock's SFR and RESET required functionalities and
one for its three possible subclocks of the phy's themselves.
In order for this layout to properly work in
From: Sergiu Moga
Add the ability to enable/disable whatever USB PHY's are
passed to the AT91 OHCI driver through DT.
Signed-off-by: Sergiu Moga
[eugen.hris...@collabora.com: rewrite error paths according to Marek's review]
Signed-off-by: Eugen Hristev
---
v1 -> v2:
- use *_bulk API's
From: Sergiu Moga
Register the OHCI driver into DM by properly initializing the required
clocks and pins required by the DT node of OHCI. In order for the VBUS
to stay enabled, a `child_pre_probe` method has been added to overcome
the DM core disabling it in `usb_scan_device`: when the generic
cycle
Eugen Hristev (1):
configs: sama5d2: enable CONFIG_LTO
Stefan Roese (1):
configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO
Zixun LI (1):
atmel_sdhci: Force card-detect if MMC_CAP_NONREMOVABLE.
configs
.
Signed-off-by: Zixun LI
---
Applied to u-boot-at91/master, thanks !
Reviewed-by: Eugen Hristev
On 7/24/23 13:29, mihai.s...@microchip.com wrote:
Hello Eugen,
I have successfully tested the binary on sama5d2_xplained board.
Board is booting OK the zImage from fat (eMMC).
Tested-by: Mihai Sain
Best regards,
Mihai Sain
Thank you for testing,
applied to u-boot-at91/master
On 7/24/23 13:29, mihai.s...@microchip.com wrote:
Tested-by: Mihai Sain
Applied to u-boot-at91/master, thanks !
On 4/27/23 11:59, Stefan Roese wrote:
Adding just a tiny bit more code for sama5d2_icp_mmc leads to a SRAM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Signed-off-by: Stefan Roese
Cc: Tudor Ambarus
Cc: Eugen Hristev
arm-none-linux-gnueabihf-ld.bfd: u-boot-spl section `__u_boot_list' will not
fit in region `.sram'
arm-none-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 100 bytes
SPL is at limit so to stop seeing above error in built, enable
link time optimizations CONFIG_LTO.
Signed-off-by: Eugen
regards,
Mihai Sain
-Original Message-
From: Eugen Hristev
Sent: Monday, July 24, 2023 11:13 AM
To: Mihai Sain - M19926 ; u-boot@lists.denx.de
Cc: Cristian Birsan - M91496
Subject: Re: [u-boot][PATCH] board: at91: sama5d29_curiosity: add initial
support for sama5d29_curiosity
EXTERNAL
Hello Mihai,
Thank you for the patch.
However, the at91 maintainer tree nowadays has a big problem, I cannot
apply patches because the size of the SPL will overflow.
There is a pending patch that fixes it, but it has not been tested.
Here you can help, and test this integration branch (at
On 5/17/23 13:46, Eugen Hristev wrote:
On 5/15/23 16:16, Tom Rini wrote:
On Mon, May 15, 2023 at 03:57:14PM +0300, Eugen Hristev wrote:
On 5/15/23 15:52, Tom Rini wrote:
On Mon, May 15, 2023 at 03:36:24PM +0300, Eugen Hristev wrote:
On 5/6/23 01:03, Tom Rini wrote:
On Tue, Apr 25, 2023
On 7/18/23 10:44, Jagan Teki wrote:
On Tue, 18 Jul 2023 at 02:36, Eugen Hristev wrote:
On 7/17/23 18:42, Jagan Teki wrote:
Sync the linux-next from below commit,
commit <1642bf66e270> ("arm64: dts: rockchip: add USB2 to
rk3588s-rock5a")
Also rops the duplicate usb node
Hi Svyatoslav,
On 7/18/23 10:05, Svyatoslav Ryhel wrote:
Commit is based on 4fcba5d ("regulator: implement basic reference
counter") but expands the idea to all regulators instead of just
fixed/gpio regulators.
Signed-off-by: Svyatoslav Ryhel
---
drivers/power/regulator/regulator-uclass.c
On 7/17/23 18:42, Jagan Teki wrote:
Sync the linux-next from below commit,
commit <1642bf66e270> ("arm64: dts: rockchip: add USB2 to
rk3588s-rock5a")
Also rops the duplicate usb nodes from rk3588s-u-boot.dtsi
Signed-off-by: Jagan Teki
---
arch/arm/dts/rk3588-edgeble-neu6a.dtsi | 1 -
/spl/spl_fit.c:595: undefined reference to `fpga_load'
To solve this, added an inline empty stub in the header if
CC_OPTIMIZE_FOR_DEBUG is set such that the build will succeed.
Signed-off-by: Eugen Hristev
---
Changes in v3:
- return -ENOSYS
Changes in v2:
- this is a rework as suggested by Simon
This was not done when the tree name was changed, fix it now.
Signed-off-by: Eugen Hristev
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index d724b6467344..2477923a5201 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -409,7 +409,7
On 7/6/23 11:06, Eugen Hristev wrote:
On 7/5/23 23:16, Alexander Dahl wrote:
From: Alexander Dahl
The user guide says it's a Microchip 24AA025E48 serial EEPROM, which is
a 2-Kbit I2C Serial EEPROM with EUI-48™ Identity. This is the chip
actually populated on board EV40E67A rev 4.
Signed-off
nk you for the patch.
I remember I tested this a while back and I remember that the 24c32
compatible is not correct for this eeprom.
I have this commit that fixed it for sam9x60ek board:
commit 5ae89b3cfe842ecbb5153a95e2e3ac404abe543c
Author: Eugen Hristev
Date: Thu May 26 17:04:56 2022 +0300
/spl/spl_fit.c:595: undefined reference to `fpga_load'
To solve this, added an inline empty stub in the header if
CC_OPTIMIZE_FOR_DEBUG is set such that the build will succeed.
Signed-off-by: Eugen Hristev
---
Changes in v2:
- this is a rework as suggested by Simon of this previous patch :
https
")
304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a")
cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on
rk3588s-rock5a")
Signed-off-by: Eugen Hristev
---
Resent with correct email addresses
Changes in v4:
- tweaked the defconfig as revi
Move bootph-all prop to common SoC dt file, because they are typically used
by multiple boards.
Unreferenced nodes are removed from the SPL device tree during a
normal build.
Suggested-by: Jonas Karlman
Signed-off-by: Eugen Hristev
---
Resent with correct mail addresses
Changes in v4:
- new
")
304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a")
cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on
rk3588s-rock5a")
Signed-off-by: Eugen Hristev
---
Changes in v4:
- tweaked the defconfig as reviewed by Jonas
- moved some of bootph-
Move bootph-all prop to common SoC dt file, because they are typically used
by multiple boards.
Unreferenced nodes are removed from the SPL device tree during a
normal build.
Suggested-by: Jonas Karlman
Signed-off-by: Eugen Hristev
---
Changes in v4:
- new patch
arch/arm/dts/rk3588-rock-5b-u
add my patchwork alias
Signed-off-by: Eugen Hristev
---
doc/git-mailrc | 1 +
1 file changed, 1 insertion(+)
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 96623c3b4ee1..0ceb9eb88b52 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -22,6 +22,7 @@ alias apritzel Andre Przywara
")
304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a")
cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on
rk3588s-rock5a")
Signed-off-by: Eugen Hristev
---
Changes in v3:
- forgot to add defconfig and include file, added now, sorry
1 - 100 of 623 matches
Mail list logo