Dear Sagar Heroorkar,
In message aanlktinffetcecool9xw-e3dthx3pxy-vlol3hcu4...@mail.gmail.com you
wrote:
I changed the TEXT_BASE address to something different. I see that the image
size of the uboot is changed so much.
It seems you did not really understand what your change is doing, so
Thomas Chou schrieb:
Reinhard Meyer wrote:
Thomas Chou schrieb:
Reinhard Meyer wrote:
Its even simpler, provided the hardware can do open collector. Here
was my solution for AVR32AP7000:
Then we could add a config for open drain similar to that of linux driver.
# ifndef I2C_SDA
# ifdef
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR flash;
much
SDRAM;
2) To know better the structure I'd like to run from NOR flash without reloc.
How can I change noot.lds?
I'd not have the email of
On Wed, 14 Jul 2010, Fabio Giovagnini wrote:
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR flash;
much
SDRAM;
2) To know better the structure I'd like to run from NOR flash without reloc.
How can
On Wed, Jul 14, 2010 at 4:48 AM, Remy Bohmer li...@bohmer.net wrote:
Hi,
2010/7/13 Vitaly Kuzmichev vkuzmic...@mvista.com:
FYI I'm doing some work on this branch too.
Great!
Actually I have ported it to 2010.03
What do you mean with ported to 2010.03?
It was already working on latest
Thanks Guennadi.
I hope Nobuhiro san would answer to me.
This is my condition.
I have derived a board based on rsk7203 keeping in mind the hw of rks7203.
But I used 8 MBytes of Nor FLASH and 64 MBytes of SDRAM.
I have potred the linux-2.6.17 given with rsk7203 and I developed the kernel
driver
Thanks Guennadi.
I hope Nobuhiro san would answer to me.
This is my condition.
I have derived a board based on rsk7203 keeping in mind the hw of rks7203.
But I used 8 MBytes of Nor FLASH and 64 MBytes of SDRAM.
I have potred the linux-2.6.17 given with rsk7203 and I developed the kernel
driver
Hi,
I'm updating my uboot to mainline and I have a question about a link
generate from mkconfig (with mpc5121_config).
Follwing link in include/asm, I found a link named arch genarated by
mkconfig.
This is broken so point to arch-mpc512x instead of
arch/powerpc/cpu/mpc512x.
Result is #include
Hi nobuhiro san.
Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203
the file
lowlevel_init.S
defines
PDCRL4_A
but do not ise it.
So if the port are not set as Data bus, how the sysstem can boot?
Thanks a in advance
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
Hi Nobuhiro san,
I see STBCR registers but never used.
Where are the modules set out from thye stand by?
Regards
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
www.aurion-tech.com
Hi Remi,
What do you mean with ported to 2010.03?
It was already working on latest git, do you mean you backported it to
an older version?
I mean that I have to work over our fork of main u-boot 2010.03.
Of course before submitting the patches I will test them on both
'master' branches of
Hi,
We also implemented the CDC and RNDIS on our board and working well.
If you merge your usb gadget tree then we will send the patches also.
Have you shared this anywhere (public git?)?
I would like to look at your patches to sync them with mine.
___
WBR,
Vitaly.
On 07/14/2010 11:10 AM,
Matteo Facchinetti wrote:
Hi,
Hi Matteo,
I'm updating my uboot to mainline and I have a question about a link
generate from mkconfig (with mpc5121_config).
Follwing link in include/asm, I found a link named arch genarated by
mkconfig.
This is broken so point to arch-mpc512x instead of
Hi,
The device unplug/plug behaviour was a pain for RNDIS,
Do you mean that Windows and u-boot do not recognize cable unplug?
Device unplug/plug behaviour on Windows is so slow...
What I mean with unplug/plug is removing and adding the pullup
resistor that makes the devices visible to the
Stefano Babic wrote:
Matteo Facchinetti wrote:
Hi,
Hi Matteo,
Hi Stefano,
I'm updating my uboot to mainline and I have a question about a link
generate from mkconfig (with mpc5121_config).
Follwing link in include/asm, I found a link named arch genarated by
mkconfig.
Hi all,
Looking at the custodians list on the Denx site, I haven't found one for
ide or mass storage. Did I miss him/her? If not, then, apart from
Prafulla's for Marvell stuff, whose Ack or Nak should I expect for this
patch set?
Thanks in advance,
Amicalement,
Albert.
Le 13/07/2010 14:02,
From: york york...@freescale.com
If 36-bit physical address is used, move the INIT_RAM_ADDR to higher
address. This frees the low 4GB address space for better use.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc85xx/start.S |7 +++
1 files changed, 7
From: york york...@freescale.com
If 36-bit is enabled, move INIT_RAM_ADDR physical address higher
to free lowest 4GB address space.
Signed-off-by: York Sun york...@freescale.com
---
board/freescale/p2020ds/tlb.c |8
include/configs/P2020DS.h | 11 +++
2 files changed,
Replace environmental variables memctl_intlv_ctl and ba_intlv_ctl with
hwconfig parameters. The syntax is
setenv hwconfig fsl_ddr:ctlr_intlv=mode,bank_intlv=mode
The mode values for memory controller interleaving are
cacheline
page
bank
superbank
The mode values for bank
From: york york...@freescale.com
Previous code presumes each DIMM has up to two rank (chip select). Newer
DDR controller supports up to four chip select on one DIMM.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 52 ++-
From: york york...@freescale.com
Verified on MPC8641HPCN with four DDR2 dimms. Each dimm has dual
rank with 512MB each rank.
Also check dimm size and rank size for memory controller interleaving
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 113
From: york york...@freescale.com
For 85xx silicon which supports address hashing, it can be activated by
hwconfig.
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc85xx/ddr-gen3.c |2 ++
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 10 ++
From: york york...@freescale.com
Changes for P2020DS DDR applies to other 8xxx platform
Signed-off-by: York Sun york...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 14 +++---
arch/powerpc/cpu/mpc8xxx/ddr/options.c |1 +
2 files changed, 8 insertions(+), 7
From: york york...@freescale.com
Enabled registered DIMMs using data from SPD. RDIMMs have registers
which need to be configured before using. The register configuration
words are stored in SPD byte 60~116 (JEDEC standard No.21-C). Software
should read those RCWs and put into DDR controller
From: york york...@freescale.com
Enabled SPD
Enabled DDR2
Enabled hwconfig
Signed-off-by: York Sun york...@freescale.com
---
Makefile |1 +
board/freescale/p2020ds/ddr.c | 56 ++---
board/freescale/p2020ds/p2020ds.c |7 +++-
From: york york...@freescale.com
If enabled in config file and hwconfig, the memory test is performed
after DDR initialization when U-boot stills runs in flash and cache.
Whole memory is testable. However, only the low 2GB space is mapped
for DDR. The testing is conducted in the 2GB window and
Hello,
i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem with
access and save environment variables to NAND Flash. When I set any environment
variable and save it to Nand (saveenv), uBoot shows me Saving Environment to
NAND... and after it shows the command prompt. The
Hello,
Am Mittwoch, 14. Juli 2010, 17:05:47 schrieb Radovan Vápeník:
i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem
with access and save environment variables to NAND Flash. When I set any
environment variable and save it to Nand (saveenv), uBoot shows me
Saving
SILVER SOLUTIONS MARKETING
No business can afford to wait for the phone to ring.
Email marketing has evolved a lot since its early days, and it can now be
considered as an important branch of marketing.
Embarking on an email marketing program is one of the most effective online
marketing
Dne St 14. července 2010 19:20:34 Maciek Błachnio napsal(a):
Hi Marek,
Hi,
linux-arm-kernel, u-boot CCed.
I found your address in the description of a kernel module and decided to
give it a shot.
I'm sure I am one of many, but I wonder if you could help me with one
thing.
What kernel
Radovan Vápeník wrote:
Hello,
i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem
with access and save environment variables to NAND Flash. When I set any
environment variable and save it to Nand (saveenv), uBoot shows me Saving
Environment to NAND... and after it
Dear Matteo Facchinetti,
In message 4c3d83f3.1040...@sirius-es.it you wrote:
I'm updating my uboot to mainline and I have a question about a link
generate from mkconfig (with mpc5121_config).
Which code are you talkign about? There is no target mpc5121_config
supported in mainline...
How
I am trying to relocate the uboot code to different address in the norflash.
-Sagar
On Wed, Jul 14, 2010 at 2:10 AM, Wolfgang Denk w...@denx.de wrote:
Dear Sagar Heroorkar,
In message aanlktinffetcecool9xw-e3dthx3pxy-vlol3hcu4...@mail.gmail.com
you wrote:
I changed the TEXT_BASE address
Dear s-paul...@ti.com,
In message 1278376152-26972-1-git-send-email-s-paul...@ti.com you wrote:
Wolfgang,
Please pull u-boot-ti/master.
I ran MAKEALL for all ARMV7 boards and saw one compilation warning.
This however was not becuase of the recent updates by Steve Sakoman.
The compilation
Dear Marek Vasut,
In message 201007060323.26001.marek.va...@gmail.com you wrote:
Hey, this is the new PXA mmc driver. This is against u-boot.git master
branch.
Please pull, thanks.
---
The following changes
Dear Marek Vasut,
In message 201007060323.39074.marek.va...@gmail.com you wrote:
Hey, these are some new boards with PXA cpus. This is against u-boot.git
master
branch. Please pull, thanks.
---
The following
Dear Marek Vasut,
In message 201007060323.45787.marek.va...@gmail.com you wrote:
Hey, these are some additions and fixes. This is against u-boot.git master
branch. Please pull, thanks.
---
The following changes
I changed the TEXT_BASE to implement the uboot redundancy. I got in to
problem of having image size.
See this:
I am planning to implement uboot redundancy.
This means having the following idea which we thought.
Golden-Uboot which is flashed in the NOR-FLASH. This is not field
upgradable.
This
Dear Kumar Gala,
In message 1276143535-22532-1-git-send-email-ga...@kernel.crashing.org you
wrote:
Add 'errata' command to report what errata we workaround
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/Makefile |1 +
Dear Kumar Gala,
In message 1276143535-22532-2-git-send-email-ga...@kernel.crashing.org you
wrote:
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 14 ++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git
Dear Kumar Gala,
In message 93aa257e-bdbb-4ac9-80d3-d83c7f7b4...@kernel.crashing.org you wrote:
On May 24, 2010, at 3:09 PM, Kumar Gala wrote:
We have several boards that use the same ICS307 CLK chip to drive the
System clock and DDR clock. Move the code into a common location so we
Dear Kumar Gala,
In message 1277891327-24506-1-git-send-email-ga...@kernel.crashing.org you
wrote:
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/cpu.c | 20 ++--
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git
Dear Timur Tabi,
In message 1276547304-10105-1-git-send-email-ti...@freescale.com you wrote:
Add basic suport for the Freescale P1022DS reference board.
Specifics:
1) 36-bit only
2) Booting from NOR flash only
3) Environment stored in NOR flash only
4) No SPI support
...
+int
Dear Kumar Gala,
In message pine.lnx.4.64.1007080925590.17...@localhost.localdomain you wrote:
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Wolfgang Denk (1):
Make sure that argv[] argument pointers are not modified.
are available in the git
Le 14/07/2010 21:25, Sagar Heroorkar a écrit :
I changed the TEXT_BASE to implement the uboot redundancy. I got in to
problem of having image size.
See this:
I am planning to implement uboot redundancy.
This means having the following idea which we thought.
Golden-Uboot which is flashed in
Dear Scott Wood,
In message 20100709194156.ga7...@schlenkerla.am.freescale.net you wrote:
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Wolfgang Denk (1):
Make sure that argv[] argument pointers are not modified.
are available in the git repository
On Wed, 14 Jul 2010 21:18:48 +0200
Wolfgang Denk w...@denx.de wrote:
Dear Marek Vasut,
In message 201007060323.45787.marek.va...@gmail.com you wrote:
Hey, these are some additions and fixes. This is against u-boot.git master
branch. Please pull, thanks.
Dear Mike Frysinger,
In message 1278713901-15574-1-git-send-email-vap...@gentoo.org you wrote:
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Make sure that argv[] argument pointers are not modified. (2010-07-04
23:55:42 +0200)
are available in the git
Dear Ben Warren,
In message 4c3c0b91.40...@gmail.com you wrote:
Wolfgang,
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Wolfgang Denk (1):
Make sure that argv[] argument pointers are not modified.
are available in the git repository at:
Dear Kim Phillips,
In message 20100709161510.bcf6caf3.kim.phill...@freescale.com you wrote:
Wolfgang Denk,
please pull:
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Make sure that argv[] argument pointers are not modified. (2010-07-04
23:55:42 +0200)
Dear Scott McNutt,
In message 4c3b3fb3.3050...@psyent.com you wrote:
Dear Wolfgang,
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Wolfgang Denk (1):
Make sure that argv[] argument pointers are not modified.
are available in the git repository
Dear Kumar Gala,
In message 1279120502-6289-8-git-send-email-ga...@kernel.crashing.org you
wrote:
From: york york...@freescale.com
If enabled in config file and hwconfig, the memory test is performed
after DDR initialization when U-boot stills runs in flash and cache.
Whole memory is
Hi Sandeep,
Any plan to merge SD/MMC support patches [1] for davinci boards?
I dont see these patches in u-boot-ti. git tree [2], Please correct me if I am
wrong or I have missed any discussions on these patches.
[1] http://lists.denx.de/pipermail/u-boot/2010-May/071434.html
[2]
Dear Sagar Heroorkar,
please mind the Netiquette - do not top post, do not full quote.
In message aanlktilh2l9qoofmfto4ho5xkvmkkn0u1o_iskzpo...@mail.gmail.com you
wrote:
I am trying to relocate the uboot code to different address in the norflash.
You definitely do NOT want to do that - mind
Dear Sagar Heroorkar,
In message aanlktiku-szcralad6kmsynezwpqh2uqnfmfctyyu...@mail.gmail.com you
wrote:
I changed the TEXT_BASE to implement the uboot redundancy. I got in to
problem of having image size.
See this:
I am planning to implement uboot redundancy.
This means having the
Signed-off-by: Timur Tabi ti...@freescale.com
---
board/freescale/p1022ds/p1022ds.c | 20 ++--
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/board/freescale/p1022ds/p1022ds.c
b/board/freescale/p1022ds/p1022ds.c
index 8cc73ed..be692cb 100644
---
Le 14/07/2010 22:29, Wolfgang Denk a écrit :
Eventually your processor (which you do not care to mention) has it's
reset entry point at the end of the physical addess space, so this
will always be included in theimage - the further you move TEXT_BASE
down, the bigger your image will be.
Dear Scott Wood,
In message 20100714143151.3cea3...@schlenkerla.am.freescale.net you wrote:
This has to go through the NAND custodian.
I've provided comments on this patch.
Sorry if I missed this.
This one is just touching ARM init code. It isn't really NAND stuff
(or OneNAND, for that
On Jul 14, 2010, at 2:29 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message 1276143535-22532-1-git-send-email-ga...@kernel.crashing.org you
wrote:
Add 'errata' command to report what errata we workaround
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
On Wed, 14 Jul 2010 22:43:49 +0200
Wolfgang Denk w...@denx.de wrote:
Dear Scott Wood,
In message 20100714143151.3cea3...@schlenkerla.am.freescale.net you wrote:
This has to go through the NAND custodian.
I've provided comments on this patch.
Sorry if I missed this.
Dear Albert ARIBAUD,
In message 4c3e135b.7040...@free.fr you wrote:
Even if your golden, uboot1 and uboot2 bootloaders are all full-blown
u-boots, you still don't need to change their TEXT_BASE: just make sur
uboot{1,2} have CONFIG_SKIP_LOWLEVEL_INIT defined, and that golden
Be careful.
Dne St 14. července 2010 21:31:51 Scott Wood napsal(a):
On Wed, 14 Jul 2010 21:18:48 +0200
Wolfgang Denk w...@denx.de wrote:
Dear Marek Vasut,
In message 201007060323.45787.marek.va...@gmail.com you wrote:
Hey, these are some additions and fixes. This is against u-boot.git
master
Dne St 14. července 2010 22:54:55 Marek Vasut napsal(a):
Dne St 14. července 2010 21:31:51 Scott Wood napsal(a):
On Wed, 14 Jul 2010 21:18:48 +0200
Wolfgang Denk w...@denx.de wrote:
Dear Marek Vasut,
In message 201007060323.45787.marek.va...@gmail.com you wrote:
Hey, these
Dear Timur Tabi,
In message 1279138965-21510-1-git-send-email-ti...@freescale.com you wrote:
Signed-off-by: Timur Tabi ti...@freescale.com
---
board/freescale/p1022ds/p1022ds.c | 20 ++--
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git
Dear Albert ARIBAUD,
In message 4c3e20a3.1020...@free.fr you wrote:
Eventually your processor (which you do not care to mention) has it's
reset entry point at the end of the physical addess space, so this
will always be included in theimage - the further you move TEXT_BASE
down, the
Dear Kumar Gala,
In message 4203e0db-91ec-4311-8c52-7ec48f570...@kernel.crashing.org you wrote:
NAK. Please do not add dead code.
Please re-submit when you really add code here.
Best regards,
Wolfgang Denk
Do you want me to just merge w/the patch that does add code here?
On Jul 14, 2010, at 4:00 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message 4203e0db-91ec-4311-8c52-7ec48f570...@kernel.crashing.org you
wrote:
NAK. Please do not add dead code.
Please re-submit when you really add code here.
Best regards,
Wolfgang Denk
Do you want me to
On Jul 14, 2010, at 2:30 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message 1276143535-22532-2-git-send-email-ga...@kernel.crashing.org you
wrote:
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 14 ++
1 files changed, 14
Dear Kumar Gala,
In message eda07492-2746-46d4-963a-37f4cae0b...@kernel.crashing.org you wrote:
+#if defined(CONFIG_FSL_SATA_V2) defined(CONFIG_FSL_SATA_ERRATUM_A001)
+ if (IS_SVR_REV(svr, 1, 0)
+ ((SVR_SOC_VER(svr) == SVR_P1022) ||
+ (SVR_SOC_VER(svr) == SVR_P1022_E) ||
On Jul 14, 2010, at 3:22 PM, Timur Tabi wrote:
Signed-off-by: Timur Tabi ti...@freescale.com
---
board/freescale/p1022ds/p1022ds.c | 20 ++--
1 files changed, 10 insertions(+), 10 deletions(-)
applied and squashed into p1022ds patch
- k
Add 'errata' command to report what errata we workaround. Report
workaround for erratum SATA-A001 on P1022/P1013.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/Makefile |1 +
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 51
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
* use case statement and handle unknown values
arch/powerpc/cpu/mpc85xx/cpu.c | 28 ++--
1 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c
We have several boards that use the same ICS307 CLK chip to drive the
System clock and DDR clock. Move the code into a common location so we
share it.
Convert the P2020DS board as the first to use the new common ICS307
code.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
Acked-by: Timur
Please merge into -master.
The following changes since commit d6f324d03d7829a1da1dee8b60f91b173a3976f0:
Merge branch 'next' of git://git.denx.de/u-boot-nios (2010-07-14 22:07:41
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git master
Marek Vasut (9):
Dear Kumar Gala,
In message 1279142410-30629-1-git-send-email-ga...@kernel.crashing.org you
wrote:
Add 'errata' command to report what errata we workaround. Report
workaround for erratum SATA-A001 on P1022/P1013.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
...
+#if
On Jul 14, 2010, at 4:43 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message 1279142410-30629-1-git-send-email-ga...@kernel.crashing.org you
wrote:
Add 'errata' command to report what errata we workaround. Report
workaround for erratum SATA-A001 on P1022/P1013.
Signed-off-by: Kumar
Add 'errata' command to report what errata we workaround. Report
workaround for erratum SATA-A001 on P1022/P1013.
Also sorted the CONFIG_CMD_* list.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
* Sorted the CMD list
arch/powerpc/cpu/mpc85xx/Makefile |1 +
On Wed, Jul 14, 2010 at 3:16 PM, Wolfgang Denk w...@denx.de wrote:
NAK.
Please do not reinvent the wheel and add yet another meory test. Use
one of the existing memory tests we already have -
post/drivers/memory.c comes to mind.
That code is not capable of testing more than 2GB of RAM. It
Le 14/07/2010 23:49, Wolfgang Denk a écrit :
Dear Albert ARIBAUD,
why not keeping the list on Cc:?
Wrong and unintended action on my part, sorry: I hit the wrong reply
button (maybe there's a Thunderbird plugin that helps avoiding this?).
As I don't know if you meant this reply of yours to
Le 15/07/2010 00:35, Albert ARIBAUD a écrit :
Le 14/07/2010 23:49, Wolfgang Denk a écrit :
Dear Albert ARIBAUD,
why not keeping the list on Cc:?
Wrong and unintended action on my part, sorry: I hit the wrong reply
button (maybe there's a Thunderbird plugin that helps avoiding this?).
As I
because it's convenient.
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
include/configs/MPC8536DS.h |1 +
include/configs/MPC8540ADS.h |3 ++-
include/configs/MPC8541CDS.h |3 ++-
include/configs/MPC8544DS.h |3 ++-
include/configs/MPC8548CDS.h |3 ++-
doing so helps avant garde users, such as those using simulators that
allow users to configure the number of cores, so as to not have to
manually adjust u-boot sources. h/w should also be reliably setting
FRR NCPU in the future.
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
On QorIQ CoreNet based devices we have a global clocking block. We want
to keep track of SYSCLK frequency as it is what is used to derive all
other frequencies in the SoC
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/fdt.c |5 +
1 files changed, 5
* Added PCIE4 address, offset, DEVDISR LAW target ID
* Added new p4080 DDR registers and defines to immap
* Add missing corenet platform DEVDISR related defines
* Updated ccsr_gur to include LIODN registers
* Add RCWSR defines
* Added Basic qman, pme, bman immap structs
* Added SATA related
Add basic structures for Frame Manager on P4080/P3041/P5020 devices
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/include/asm/fsl_fman.h | 212 +
arch/powerpc/include/asm/immap_85xx.h |1 +
2 files changed, 213 insertions(+), 0
There are various locations that we have chip specific info:
* Makefile for which ddr code to build
* Added p3041 to cpu_type_list and SVR list
* Added number of LAWs for p3041
* Set CONFIG_MAX_CPUS to 4 for p3041
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
There are various locations that we have chip specific info:
* Makefile for which ddr code to build
* Added p5020 p5010 to cpu_type_list and SVR list
* Added number of LAWs for p5020
* Set CONFIG_MAX_CPUS to 2 for p5020
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
Move to using fdt_node_offset_by_compat_reg to find the node offsets we
want to update instead of using aliases.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/fdt.c | 19 +++
1 files changed, 11 insertions(+), 8 deletions(-)
diff --git
From: Emil Medve emilian.me...@freescale.com
The user manual refers to FMAN1 and FMAN2 not 0 and 1.
Signed-off-by: Emil Medve emilian.me...@freescale.com
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/cpu.c |2 +-
1 files changed, 1 insertions(+), 1
89 matches
Mail list logo
