Dear Mischa,
In message
e6bf041e97966e4db955f0df883ad2d685f40...@de02wembxa.internal.synopsys.com you
wrote:
checkpatch says:
WARNING: line over 80 characters
#610: FILE: arch/arc/lib/relocate.c:61:
+ debug( %p: rom reloc %x, ram %p, value
%x,
Dear Mischa,
In message
e6bf041e97966e4db955f0df883ad2d685f40...@de02wembxa.internal.synopsys.com you
wrote:
+void icache_enable(void)
+{
+ write_aux_reg(ARC_REG_IC_CTRL, read_aux_reg(ARC_REG_IC_CTRL)
+ ~IC_CTRL_CACHE_DISABLE);
+}
I missed this in patch # 1
On Wed, Jan 29, 2014 at 03:55:36PM -0600, Robert Nelson wrote:
Well, we have per-platform fixups in the tree today. However this now
means that only u-boot is going to provide a correct and fully
functional tree for those revs, which isn't good imho for the
beagleboard community use cases
On Mon, Jan 27, 2014 at 10:53:25AM -0800, Darwin Rambo wrote:
The Kona architecture is present on a number of Broadcom mobile SoCs
including the bcm281xx family of chips.
[snip]
+int __weak clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+ return 0;
+}
+int __weak
On Mon, Jan 27, 2014 at 10:53:24AM -0800, Darwin Rambo wrote:
This patchset introduces the Broadcom bcm281xx family of mobile SoC
chips. Broadcom kona hardware blocks are often found in Broadcom mobile
SoC chips including the bcm281xx family, so support for some of these
kona blocks is also
On Mon, Jan 27, 2014 at 10:53:26AM -0800, Darwin Rambo wrote:
Add bcm281xx architecture support code including a clock framework and
chip reset. Define register block base addresses for the bcm281xx
architecture and create an empty gpio header file required when
CONFIG_CMD_GPIO is set.
On Tue, Nov 26, 2013 at 04:13:59PM +0900, Masahiro wrote:
Commit cbe5cdfcd changed config.mk and arch/sandbox/cpu/Makefile
to use -idirafter instead of -I and remove -nostdinc.
But
* Sandbox-specific code dirties config.mk
* os.c is compiled without such compiler flags as:
-Wall
On Mon, Jan 27, 2014 at 10:53:30AM -0800, Darwin Rambo wrote:
Add support for the bcm28155_ap reference board.
Signed-off-by: Darwin Rambo dra...@broadcom.com
Reviewed-by: Steve Rae s...@broadcom.com
Reviewed-by: Tim Kryger tkry...@linaro.org
[snip]
+ gd-ram_size =
On Mon, Jan 27, 2014 at 05:28:22PM +0100, Paul Chavent wrote:
On platform with a DSP co-processor, add a command to boot an elf on
it.
* Test *
This patch has been tested on an OMAP-L138 EVM with DSP code generated
with TI's code generation tools 7.4.6 with the --abi=eabi option.
*
On 01/27/2014 10:44 PM, Priyanka Jain wrote:
This covers only non-L2 switch ethernet interfaces i.e.
RGMII and SGMII interface for both
-T1040RDB
-T1042RDB_PI
T1040RDB is configured as serdes protocol 0x66 which can
support following interfaces
-2 RGMIIS on DTSEC4, DTSEC5
-1 SGMII on
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
From: Rainer Boschung rainer.bosch...@keymile.com
-uses common deblocking algorithm from ../common/common.c
I don't see any algorithm in the common.c file.
-supports deblocking of of I2C-bus1 by means of QRIO GPIO
- SCL1 = GPIO_A16
-
make %docs have not worked for a while.
This problem was reported by Abraham Varricatt: make htmldocs gives error
http://u-boot.10912.n7.nabble.com/quot-make-htmldocs-quot-gives-error-td168840.html
This series adjust kernel doc stuff to the current build system
and fix errors.
After applying
- Delete fs.xml from DOCBOOKS to fix an error
Commit e3ff797c added fs.xml to DOCBOOKS
but missed to add doc/DocBook/fs.tmpl
- Fix the location of include guard in include/linker_lists.h
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Reported-by: Abraham Varricatt
tools/kernel-doc/docproc.c and tools/kernel-doc/kernel-doc are
script files imported Linux Kernel.
They originally resided under scripts/ directory in Linux Kernel.
This commit moves them to the original location.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Makefile
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
doc/DocBook/stylesheet.xsl | 1 -
scripts/docproc.c | 72 +++-
scripts/kernel-doc | 74 +++---
3 files changed, 101 insertions(+), 46
Hello Abraham,
On Tue, 3 Dec 2013 14:25:44 +0530
Abraham V. abraham.varric...@vvdntech.com wrote:
Hello everyone,
(cc Simon Glass)
I just tried to make the documentation for uboot with the following
command (checked out latest mainline sources);
[snip]
We can see that there's some
Can anyone inform me the steps for compiling and running the u-boot source
code?
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hello Chin,
Am 22.01.2014 16:37, schrieb Chin Liang See:
Thanks Alexey.
Hi Heiko,
I believe this patch should be good for apply. Would need your help
then. :) Thanks
Chin Liang
On Wed, 2014-01-15 at 15:51 +, Alexey Brodkin wrote:
On Wed, 2014-01-15 at 09:45 -0600, Chin Liang See
Hello Michal,
Am 22.01.2014 09:46, schrieb Michal Simek:
From: Michael Burrmichael.b...@logicpd.com
Fixed bug with alen == 0 in 'i2c_write', 'i2c_read'
Further minor corrections:
- Write 'address' register before 'data' register.
- Write 'transfer_size' register before 'address' register.
Hello Michal,
Am 22.01.2014 09:46, schrieb Michal Simek:
From: Michael Burrmichael.b...@logicpd.com
Initialize the second i2c controller.
Signed-off-by: Michael Burrmichael.b...@logicpd.com
Signed-off-by: Michal Simekmichal.si...@xilinx.com
---
Changes in v2: None
Changes in v1:
- Based on
Hello Sonic,
Am 28.01.2014 06:53, schrieb Sonic Zhang:
From: Sonic Zhangsonic.zh...@analog.com
Signed-off-by: Sonic Zhangsonic.zh...@analog.com
---
drivers/i2c/bfin-twi_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-i2c.git, thanks!
bye,
Heiko
--
DENX
USB spec says that the minimum disconnect threshold should be
over 525 mV. However, internal USB PHY threshold value is below
this specified value. Due to this some devices disconnect at
run-time. Hence, phy settings are tweaked to increased disconnect
Hello Sonic,
Am 28.01.2014 06:53, schrieb Sonic Zhang:
From: Sonic Zhangsonic.zh...@analog.com
Signed-off-by: Sonic Zhangsonic.zh...@analog.com
---
arch/blackfin/include/asm/blackfin_local.h | 7 ---
arch/blackfin/include/asm/clock.h | 11 +++
Hello Sonic,
Am 28.01.2014 06:53, schrieb Sonic Zhang:
From: Scott Jiangscott.jiang.li...@gmail.com
The ADI twi peripheral is not binding to Blackfin processor only.
Access i2c registers by standard io functions.
Fix coding style.
Signed-off-by: Scott Jiangscott.jiang.li...@gmail.com
Hello Sonic,
Am 28.01.2014 06:53, schrieb Sonic Zhang:
From: Sonic Zhangsonic.zh...@analog.com
The ADI twi peripheral is not binding to Blackfin processor only.
Change to a generic name.
Signed-off-by: Sonic Zhangsonic.zh...@analog.com
---
arch/blackfin/include/asm/twi.h | 15
After compiling the u-boot code what steps must be followed to boot the
current system (system with Grub) with u-boot?I mean how can I port my
system with the u-boot which I compiled?
___
U-Boot mailing list
U-Boot@lists.denx.de
This covers only non-L2 switch ethernet interfaces i.e.
RGMII and SGMII interface for both
-T1040RDB
-T1042RDB_PI
T1040RDB is configured as serdes protocol 0x66 which can
support following interfaces
-2 RGMIIS on DTSEC4, DTSEC5
-1 SGMII on DTSEC3
T1042RDB_PI is configured as serdes protocol
Sorry, just had a baby and things are a bit busy.
It's not fallen into the bit-bucket if that's what you're worried about.
Regards
-- Pantelis
On Jan 29, 2014, at 11:14 PM, York Sun wrote:
On 11/01/2013 12:47 AM, Zhang Haijun wrote:
:-)
Thanks.
于 2013/11/1 15:45, Pantelis Antoniou 写道:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 29.01.2014 20:47, schrieb Tom Rini:
On 01/29/2014 02:41 PM, Andreas Färber wrote:
Am 29.01.2014 19:38, schrieb Stephen Warren:
On 01/29/2014 02:22 AM, Andreas Färber wrote:
Am 29.01.2014 06:42, schrieb Stephen Warren:
The entries in config.mk
On 01/30/2014 03:30 AM, York Sun wrote:
On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
From: Rainer Boschung rainer.bosch...@keymile.com
-uses common deblocking algorithm from ../common/common.c
I don't see any algorithm in the common.c file.
The file is board/keymile/common/common.c,
On 01/29/2014 10:57 PM, Tom Rini wrote:
On Tue, Jan 28, 2014 at 03:23:23PM +0100, Michal Simek wrote:
Hi guys,
I do play a little bit with u-boot spl and I am curious
about fat32 implementation. There is MAX_CLUSTSIZE which is 65k
and there are 3 buffers in fat.c code
do_fat_read_at_block
On 01/23/2014 08:53 AM, Michal Simek wrote:
On 01/22/2014 08:44 PM, Gerhard Sittig wrote:
On Wed, Jan 22, 2014 at 12:02 +0100, Michal Simek wrote:
--- /dev/null
+++ b/common/cmd_clk.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:
101 - 132 of 132 matches
Mail list logo