From: Andrea Scian andrea.sc...@dave.eu
MAX6373 is a simple WDT which is programmed its configuration pins
and reset via another pin, which is usually connected to a GPIO
Signed-off-by: Andrea Scian andrea.sc...@dave.eu
---
drivers/watchdog/Makefile |1 +
drivers/watchdog/max6373_wdt.c
Simon,
I am facing a weird issue on the latest u-boot. I can successfully build u-boot
manually, but with buildman I see checkdtc error.
aarch64: + ls2085aqds
+make[1]: *** [checkdtc] Error 1
+make: *** [sub-make] Error 2
I have DTC 1.4.1-ge5e6df7c. Is there any flag for buildman I can
On Wed, Jul 22, 2015 at 06:05:42PM -0500, Nishanth Menon wrote:
Commit bd2c4522c26d5 (ti: armv7: enable EXT support in SPL (using
ti_armv7_common.h)) enabled thumb mode only for SPL builds, however,
All TI armv7 platforms do support thumb, and there is no reason why the
space savings cannot
On 07/23/2015 02:46 PM, Andreas Färber wrote:
Salut Alexandre,
Am 09.07.2015 um 09:32 schrieb Alexandre Courbot:
Tegra124 requires the bootloader to perform VPR initialization, otherwise the
GPU cannot be used by the system. Since using the GPU without that
initialization results in a hang,
On Wed, Jul 22, 2015 at 04:56:10PM -0600, Stephen Warren wrote:
From: Thierry Reding tred...@nvidia.com
Some SoCs come with a custom timer interface, so allow them to use that
instead.
swarren notes: I did consider reworking this patch so the Makefile only
compiles generic_timer.c ifndef
Stephen,
-Original Message-
From: Stephen Warren [mailto:swar...@wwwdotorg.org]
Sent: Wednesday, July 22, 2015 11:05 AM
To: Tom Warren
Cc: u-boot@lists.denx.de; Thierry Reding; Stephen Warren;
tomcwarren3...@gmail.com
Subject: Re: [U-Boot] [PATCH V2 6/6] T210: Add support for
On 22 July 2015 at 15:58, Stephen Warren swar...@wwwdotorg.org wrote:
From: Thierry Reding tred...@nvidia.com
Signed-off-by: Thierry Reding tred...@nvidia.com
Signed-off-by: Tom Warren twar...@nvidia.com
[swarren, stripped out changes not strictly related to warnings]
Signed-off-by: Stephen
On 22 July 2015 at 16:56, Stephen Warren swar...@wwwdotorg.org wrote:
From: Thierry Reding tred...@nvidia.com
Some SoCs come with a custom timer interface, so allow them to use that
instead.
swarren notes: I did consider reworking this patch so the Makefile only
compiles generic_timer.c
On 22 July 2015 at 15:34, Stephen Warren swar...@wwwdotorg.org wrote:
From: Thierry Reding tred...@nvidia.com
Signed-off-by: Thierry Reding tred...@nvidia.com
Signed-off-by: Tom Warren twar...@nvidia.com
Signed-off-by: Stephen Warren swar...@nvidia.com
---
drivers/mmc/tegra_mmc.c | 6
On 6 July 2015 at 16:47, Simon Glass s...@chromium.org wrote:
Some devices can take a long time to work out whether they have a new packet
or now. For example the ASIX USB Ethernet dongle can take 5 seconds to do
this, since it waits until it gets a new packet on the wire before allowing
the
On 22 July 2015 at 15:33, Stephen Warren swar...@wwwdotorg.org wrote:
From: Thierry Reding tred...@nvidia.com
Signed-off-by: Thierry Reding tred...@nvidia.com
Signed-off-by: Tom Warren twar...@nvidia.com
Signed-off-by: Stephen Warren swar...@nvidia.com
---
drivers/i2c/tegra_i2c.c | 4 ++--
On 22 July 2015 at 16:44, Stephen Warren swar...@wwwdotorg.org wrote:
From: Thierry Reding tred...@nvidia.com
The encoding of the sub instruction used to handle CONFIG_SYS_MALLOC_F_LEN
can only accept certain values, and the set of acceptable values differs
between the AArch32 and AArch64
On Tue, Jul 21, 2015 at 10:24 PM, Marek Vasut ma...@denx.de wrote:
On Wednesday, July 22, 2015 at 12:46:15 AM, Dinh Nguyen wrote:
On 07/20/2015 02:40 PM, Marek Vasut wrote:
On Monday, July 20, 2015 at 09:31:39 PM, Dinh Nguyen wrote:
[...]
Hi,
yeah, I have some insane amount of
On 23 July 2015 at 00:17, Masahiro Yamada yamada.masah...@socionext.com wrote:
Currently, Devres requires additional 16 byte for each allocation,
which is not so insignificant in some cases.
Add CONFIG_DEVRES to make this framework optional.
If the option is disabled, devres functions fall
On 22 July 2015 at 17:10, Stephen Warren swar...@wwwdotorg.org wrote:
From: Thierry Reding tred...@nvidia.com
While generating the page tables, a running integer index is shifted by
SECTION_SHIFT (29) and causes overflow for any integer bigger than 7.
The page tables therefore alias to the
On Wed, Jul 22, 2015 at 06:05:45PM -0500, Nishanth Menon wrote:
Try to maintain as much commonality by conditionally including stuff
in armv7_common as necessary and removing the common defines from
keystone2 header.
Note: as part of this change, all keystone2 platforms will now start
Hello folks,
I went over the process of upgrading the U-Boot, in OE-Core, and now
we have 2015.07 merged.
Along the process I found a pending patch for merging[1] and I would
like to know how is the best way to address this specific issue in
mainline.
1.
fdt_addr_t is a physical address. It can be either 64-bit or 32-bit,
depending on the architecture. It should be phys_addr_t instead of
u64 or u32. Similarly, fdt_size_t is changed to phys_size_t.
Signed-off-by: York Sun york...@freescale.com
CC: Simon Glass s...@chromium.org
---
Change log
v2:
Hi York,
On 23 July 2015 at 16:10, York Sun york...@freescale.com wrote:
Simon,
I am facing a weird issue on the latest u-boot. I can successfully build
u-boot
manually, but with buildman I see checkdtc error.
aarch64: + ls2085aqds
+make[1]: *** [checkdtc] Error 1
+make: ***
On 23 July 2015 at 00:17, Masahiro Yamada yamada.masah...@socionext.com wrote:
Currently, we only have DM_FLAG_ACTIVATED to indicate the device
status, but we still cannot know in which stage is in progress,
binding or probing.
This commit introduces a new flag, DM_FLAG_BOUND, which is set
Commit e02ee2548afe (kconfig: switch to single .config
configuration) made the configuration itself pretty simple,
instead, we lost the way to systematically enable/disable config
options for each image independently.
Our current strategy is, put entries into Makefile.spl for options
we need
Refer to Simon's question, too:
http://lists.denx.de/pipermail/u-boot/2015-July/219598.html
Since U-boot introduced SPL (not since Kconfig),
enabling features for U-boot and SPL independently is always a PITA.
- decide if each feature should be supported for SPL or not
- Add
Add one more print to make clear which EL level U-Boot runs.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
board/xilinx/zynqmp/zynqmp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 88fe3e844f5b..0c9a81414458
Enable SATA for the ZynqMP targets.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
arch/arm/include/asm/arch-zynqmp/hardware.h | 2 ++
board/xilinx/zynqmp/zynqmp.c| 10 ++
include/configs/xilinx_zynqmp.h | 11 +++
This patch adds support for multiple hostcontrollers to the ehci-marvell driver
and enables all 3 usb-hcs on the db-mv784mp-gp board.
It depends on the initial Armada XP usb support patch from Stefan.
Signed-off-by: Anton Schubert anton.schub...@gmx.de
Cc: Stefan Roese s...@denx.de
Cc: Luka
On 23.07.15 15:43, Mugunthan V N wrote:
On Thursday 23 July 2015 04:46 PM, Ivan Khoronzhuk wrote:
Hi, Mugunthan
You are right, phy mode is a board property.
But just for clarifying, does Ethernet SS, which contains SGMII
on board, support another i/f mode except SGMII? Can it work
w/o
Hi, Mugunthan
You are right, phy mode is a board property.
But just for clarifying, does Ethernet SS, which contains SGMII
on board, support another i/f mode except SGMII? Can it work
w/o SerDes?
On 23.07.15 12:01, Mugunthan V N wrote:
Phy mode is a board property and it can be different
On 07/22/2015 07:05 PM, Nishanth Menon wrote:
Changes since v3:
- picked up V3 reviewed bys
- Dropped the original 8/8 patch (ramdisk) introduced patch #3 (thumb
mode)
(dropped patch = https://patchwork.ozlabs.org/patch/497392/ )
Tested on K2HK-evm
OMAP4 Panda:
The previous commit introduced a useful macro used in makefiles,
which references to different variables (CONFIG_ or CONFIG_SPL_
prefixed), in order to enable/disable features independently
for each of images.
Per-image config option control is a PITA in C sources, too.
So, introduce some macros
Wire up ethernet controllers and enable MII and BOOTP options.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
arch/arm/include/asm/arch-zynqmp/hardware.h | 5 +
arch/arm/include/asm/arch-zynqmp/sys_proto.h | 5 +
board/xilinx/zynqmp/zynqmp.c | 25
Hi Simon,
On Wed, Jul 22, 2015 at 11:49 PM, Simon Glass s...@chromium.org wrote:
From: Ben Stoltz sto...@google.com
Add configuration and Kconfig changes for this board.
Signed-off-by: Ben Stoltz sto...@google.com
Signed-off-by: Simon Glass s...@chromium.org
---
Sry, forgot the cc again.
Anton
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
This is a basic driver for the sunxi NAND controller for Allwinner A20.
It supports only SPL.
The driver uses DMA for data transfers. It does not support writing.
Changes in v3:
- moved pinmux and clock to board level
- code cleanup with significant size reduction
- renamed the driver file
-
When SPL_NAND_SUNXI option is selected in config, set some configuration
options for sunxi NAND.
This commit also introduces the configurable options in Kconfig.
Signed-off-by: Peter Gielda pgie...@antmicro.com
Signed-off-by: Tomasz Gorochowik tgorocho...@antmicro.com
Signed-off-by: Mateusz
This driver adds NAND support to SPL.
It was tested on Allwinner A20.
Signed-off-by: Peter Gielda pgie...@antmicro.com
Signed-off-by: Tomasz Gorochowik tgorocho...@antmicro.com
Signed-off-by: Mateusz Holenko mhole...@antmicro.com
Signed-off-by: Piotr Zierhoffer pzierhof...@antmicro.com
From: Karol Gugala kgug...@antmicro.com
To enable NAND flash in sunxi SPL,
pins 0-6, 8-22 and 24 on port C are configured.
Signed-off-by: Karol Gugala kgug...@antmicro.com
Signed-off-by: Piotr Zierhoffer pzierhof...@antmicro.com
---
Changes in v3:
- moved pinmux and clock to board level
- code
As SPL does not know which source to choose when booting U-Boot, choose
NAND if it is capable of doing so.
Signed-off-by: Peter Gielda pgie...@antmicro.com
Signed-off-by: Tomasz Gorochowik tgorocho...@antmicro.com
Signed-off-by: Mateusz Holenko mhole...@antmicro.com
Signed-off-by: Piotr
Hi Anton,
(added Marek to Cc, as he's the USB custodian)
On 23.07.2015 14:25, Anton Schubert wrote:
This patch adds support for multiple hostcontrollers to the ehci-marvell driver
and enables all 3 usb-hcs on the db-mv784mp-gp board.
It depends on the initial Armada XP usb support patch from
On Thursday 23 July 2015 04:46 PM, Ivan Khoronzhuk wrote:
Hi, Mugunthan
You are right, phy mode is a board property.
But just for clarifying, does Ethernet SS, which contains SGMII
on board, support another i/f mode except SGMII? Can it work
w/o SerDes?
There is a upcoming SoC (K2E) using
This patch adds support for multiple hostcontrollers to the ehci-marvell driver
and enables all 3 usb-hcs on the db-mv784mp-gp board.
It depends on the initial Armada XP usb support patch from Stefan.
Signed-off-by: Anton Schubert anton.schub...@gmx.de
Reviewed-by: Stefan Roese s...@denx.de
Cc:
Hi Simon,
On Wed, Jul 22, 2015 at 11:49 PM, Simon Glass s...@chromium.org wrote:
It is useful to be able to load U-Boot onto a board even it is it already
running EFI. This can allow access to the U-Boot command interface, flexible
booting options and easier development.
The easiest way to
On 07/22/2015 12:23 PM, Alexander Stein wrote:
Now that mailbox driver supports cache flush and invalidation, we can
enable dcache.
Aside from the minor comments I made, the series,
Acked-by: Stephen Warren swar...@wwwdotorg.org
The series,
Tested-by: Stephen Warren swar...@wwwdotorg.org
On 07/14/2015 09:44 AM, Simon Glass wrote:
Hi Stephen,
On 13 July 2015 at 22:52, Stephen Warren swar...@wwwdotorg.org wrote:
On 07/11/2015 08:04 AM, Simon Glass wrote:
Hi Stephen,
On 10 July 2015 at 23:34, Stephen Warren swar...@wwwdotorg.org wrote:
On 07/07/2015 08:53 PM, Simon Glass
Hi Simon,
On Wed, Jul 22, 2015 at 11:49 PM, Simon Glass s...@chromium.org wrote:
Add support for building a 32/64-bit EFI stub for x86. This involves
building the startup and relocation code for either i386 or x86_64.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/x86/lib/Makefile
On 07/23/2015 03:24 PM, Simon Glass wrote:
Hi York,
On 23 July 2015 at 16:10, York Sun york...@freescale.com wrote:
Simon,
I am facing a weird issue on the latest u-boot. I can successfully build
u-boot
manually, but with buildman I see checkdtc error.
aarch64: + ls2085aqds
On Thursday, July 23, 2015 at 08:29:42 PM, Dinh Nguyen wrote:
[...]
BTW, I tested out our your branch, but I think I'm missing a step as
where to put the SPL DTB?
U-Boot SPL 2015.07-rc3-00100-ga2e2da6 (Jul 21 2015 - 17:15:54)
drivers/ddr/altera/sequencer.c: Preparing to start
On 07/22/2015 12:23 PM, Alexander Stein wrote:
This adds dcache support for dwc2. The DMA buffers must be DMA aligned and
is flushed for outgoing transactions before starting transfer. For
ingoing transactions it is invalidated after the transfer has finished.
diff --git
On 07/16/2015 08:10 AM, Pavel Machek wrote:
On Mon 2015-07-13 22:52:58, Stephen Warren wrote:
On 07/11/2015 08:04 AM, Simon Glass wrote:
Hi Stephen,
On 10 July 2015 at 23:34, Stephen Warren swar...@wwwdotorg.org wrote:
On 07/07/2015 08:53 PM, Simon Glass wrote:
Raspberry Pi uses a DWC2 USB
Hi,
In testing v2015.07 with OMAP35xx (Overo) boards (ES3.1), I see boot
failure which I bisected down to this patch. Reverting just this
patch from v2015.07 allows the same boards to boot into SPL without
issue. My OMAP37xx-based Overos seem unaffected. My guess is
enabling
2015-07-24 6:21 GMT+09:00 Tom Rini tr...@konsulko.com:
On Thu, Jul 23, 2015 at 05:19:39PM +0300, Nikita Kiryanov wrote:
Add option to set shell prompt string from menuconfig and use it
when migrating CONFIG_SYS_PROMPT to cm-fx6 defconfig.
Cc: Tom Rini tr...@konsulko.com
Cc: Masahiro Yamada
[trimming the list - wow a lot of people!]
Hi Bin,
On 23 July 2015 at 10:05, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Wed, Jul 22, 2015 at 11:48 PM, Simon Glass s...@chromium.org wrote:
This series allows U-Boot to be built as an EFI payload so that U-Boot
can be started on almost
On 07/22/2015 12:23 PM, Alexander Stein wrote:
The cacheline is always 32 bytes for arm1176 CPUs, so define it at board
config level for cache handling code.
include/configs/rpi-common.h | 1 +
This file applies to both RPi 1 and RPi 2. Do they have the same
cacheline size?
On 07/22/2015 12:23 PM, Alexander Stein wrote:
As both cores are similar merge the cache handling code for both CPUs
to arm11 directory.
It's useful if you pass the -C or -M option to git format-patch; that
wouuld presumably have shown that arm11/cpu.c was identical to one of
the two cpu.c
Hi York,
On 23 July 2015 at 19:15, York Sun york...@freescale.com wrote:
On 07/23/2015 03:24 PM, Simon Glass wrote:
Hi York,
On 23 July 2015 at 16:10, York Sun york...@freescale.com wrote:
Simon,
I am facing a weird issue on the latest u-boot. I can successfully build
u-boot
manually,
On Sat, May 30, 2015 at 2:41 PM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi Tom,
On 05/30/2015 09:49 AM, Tom Rini wrote:
On Fri, May 29, 2015 at 11:46:40AM +0200, Vincent Stehlé wrote:
Hi,
Is it still possible to boot u-boot on
Hi Vitaly,
On Thursday 23 July 2015 11:31 PM, Vitaly Andrianov wrote:
On 07/22/2015 11:39 AM, Lokesh Vutla wrote:
This is just a cosmetic change that makes
the calling of pll init code looks much cleaner.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
---
arch/arm/mach-keystone/clock.c
Hi,
Hi,
Am 23.07.2015 um 16:10 schrieb Ruchika Gupta:
Signed-off-by: Ruchika Gupta ruchika.gu...@freescale.com
[...]
diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile
index 4aa91e4..fd736cf 100644
--- a/drivers/crypto/fsl/Makefile
+++
On Thu, Jul 23, 2015 at 05:19:39PM +0300, Nikita Kiryanov wrote:
Add option to set shell prompt string from menuconfig and use it
when migrating CONFIG_SYS_PROMPT to cm-fx6 defconfig.
Cc: Tom Rini tr...@konsulko.com
Cc: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Stefano Babic
Hi Masahiro,
On 23 July 2015 at 00:17, Masahiro Yamada yamada.masah...@socionext.com wrote:
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
Hi Masahiro,
On 23 July 2015 at 00:17, Masahiro Yamada yamada.masah...@socionext.com wrote:
This new command can dump all device resources associated to
each device. The fields in every line shows:
- The address of the resource
- The size of the resource
- The name of the release
By default the bstopre value has been set to 0x100, used to be 1/4
value of refint. Modern DDR has increased the refresh time. Adjust
to 1/4 of refresh interval dynamically. Individual board can still
override this value in board ddr file, or to use auto-precharge.
Signed-off-by: York Sun
Remove the custom prompt and use the default instead.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
include/configs/cgtqmx6eval.h | 3 ---
1 file changed, 3 deletions(-)
diff --git a/include/configs/cgtqmx6eval.h
On Thursday, July 23, 2015 at 04:53:48 PM, Stefan Roese wrote:
On 23.07.2015 16:17, Marek Vasut wrote:
On Thursday, July 23, 2015 at 01:02:46 PM, Stefan Roese wrote:
This patch enables the USB EHCI support for the Marvell Armada XP (AXP)
SoCs. In compatism to the Armada 38x (A38x), the AXP
Implement a cm-fx6 specific board_video_skip() to provide the option to not
initialize the display.
The new function does not init display if the environment variable panel is
not defined, or if it is set to an unsupported value.
Collateral changes:
- Don't use the global displays array (it's
Move CONFIG_CMD_* options that can be selected in menuconfig to cm-fx6
defconfig.
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
configs/cm_fx6_defconfig | 5 +
include/configs/cm_fx6.h | 3 ---
2 files
Add USB support.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3:
- Fix OTG ID pin
Changes in v2:
- Use plan gpio API call (Marek)
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 44
include/configs/cgtqmx6eval.h| 15 +++
Use the same DCD settings from Congatec's U-boot tree for
the P/N 016113 card.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3:
- New patch
Changes in v2: None
board/congatec/cgtqmx6eval/imximage.cfg | 128 +---
1 file changed, 51
2015-07-21 14:04 GMT+09:00 Masahiro Yamada yamada.masah...@socionext.com:
Masahiro Yamada (7):
ARM: UniPhier: add environment sets for non-FIT Linux boot
ARM: UniPhier: add environment variable for TFTP boot
ARM: UniPhier: disable CONFIG_FIT
ARM: UniPhier: update CONFIG_BOOTARGS
On Thursday, July 23, 2015 at 04:54:45 PM, Stefan Roese wrote:
On 23.07.2015 16:20, Marek Vasut wrote:
On Thursday, July 23, 2015 at 03:07:26 PM, Anton Schubert wrote:
Sry, forgot the cc again.
Anton
The patch looks OK, but it doesn't apply on top of u-boot-usb/master .
Can you
This series includes some fixes for cm-fx6, as well as migrating of cm-fx6
config options to the defconfig file. In the process of migrating the config
#defines, new entries are added to menuconfig.
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Nikita Kiryanov (12):
With recent additions to USB Kconfig the number of USB options had grown
large enough to warrant a separate menu for USB.
Add a Kconfig menu for USB.
Cc: Marek Vasut ma...@denx.de
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
drivers/usb/Kconfig | 2 ++
1 file changed, 2
cgtqmx6eval has an eMMC connected to ESDHC3.
Add support for it.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2:
- Use ARRAY_SIZE(usdhc_cfg)
- Remove CONFIG_SYS_FSL_USDHC_NUM definition
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 22
Add SATA support.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3:
- Proper initialize the subsystem
Changes in v2: None
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 5 +
include/configs/cgtqmx6eval.h| 9 +
2 files changed, 14 insertions(+)
diff
Add LVDS and HDMI support.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2:
- Rework code to use setbits_le32 (Marek)
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 173 +++
include/configs/cgtqmx6eval.h| 20
cgtqmx6eval has a PFUZE100 FSL PMIC connected to I2C2.
Add support for it.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2:
- Rework indent-level for code (Marek)
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 85
Use more standard boot scripts and also add the capability of
booting via NFS.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
include/configs/cgtqmx6eval.h | 94 ++-
1 file changed, 66 insertions(+), 28
cgtqmx6eval can be populated with a AR8035 or KSZ9031 depending on the
board revision.
Add Ethernet support.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 206 +++
Add thermal support so that we can see the following message on boot:
CPU: Industrial temperature grade (-40C to 105C) at 33C
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
configs/cgtqmx6qeval_defconfig | 3 +++
Hi Tom,
Please pull some updates specific to UniPhier SoCs.
The following changes since commit b217c89e8565ade3aaa9f74c33c93236bf151187:
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
(2015-07-20 17:12:52 -0400)
are available in the git repository at:
On 23.07.2015 16:17, Marek Vasut wrote:
On Thursday, July 23, 2015 at 01:02:46 PM, Stefan Roese wrote:
This patch enables the USB EHCI support for the Marvell Armada XP (AXP)
SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure
the USB PLL and the USB PHY's specifically in
On Thursday, July 23, 2015 at 04:19:37 PM, Nikita Kiryanov wrote:
With recent additions to USB Kconfig the number of USB options had grown
large enough to warrant a separate menu for USB.
Add a Kconfig menu for USB.
Cc: Marek Vasut ma...@denx.de
Signed-off-by: Nikita Kiryanov
On Thursday, July 23, 2015 at 04:19:36 PM, Nikita Kiryanov wrote:
Add Kconfig options for USB keyboard and use them for cm-fx6.
Cc: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb
config to defconfig.
Cc: Masahiro Yamada yamada.masah...@socionext.com
Cc: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov
cm-fx6 is an MX6 based board, and the menuconfig hierarchy should
reflect that. Make TARGET_CM_FX6 dependant on ARCH_MX6.
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
arch/arm/Kconfig | 8
Refactor display code to only setup hdmi if do_enable_hdmi() is invoked.
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
board/compulab/cm_fx6/cm_fx6.c | 9 +++--
1 file changed, 3 insertions(+), 6
CPU_V7 is already selected by ARCH_MX6, so no point in selecting it again
by boards that depend on ARCH_MX6.
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
On Thursday, July 23, 2015 at 03:07:26 PM, Anton Schubert wrote:
Sry, forgot the cc again.
Anton
The patch looks OK, but it doesn't apply on top of u-boot-usb/master .
Can you please fix it up ?
Best regards,
Marek Vasut
___
U-Boot mailing list
On 23.07.2015 16:20, Marek Vasut wrote:
On Thursday, July 23, 2015 at 03:07:26 PM, Anton Schubert wrote:
Sry, forgot the cc again.
Anton
The patch looks OK, but it doesn't apply on top of u-boot-usb/master .
Can you please fix it up ?
Perhaps its easiest if we wait for all the queued MVEBU
U-Boot does not explicitly assign the display to an IPU interface. Instead, it
relies on the power-on default of DI0.
Since the kernel reassigns HDMI display to DI1, after a warm reset the HDMI
display no longer works in U-Boot.
Fix this by explicitly assigning HDMI to IPU1 DI0 in U-Boot.
Cc:
Add support for selecting display preset using the environment variable
displaytype. This is a preparation for future merging of compulab
omap3_display.c display selection code with the cm-fx6 display selection code.
The panel environment variable is retained for backwards compatibility.
Cc:
Add Kconfig options for USB keyboard and use them for cm-fx6.
Cc: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Signed-off-by: Nikita Kiryanov nik...@compulab.co.il
---
configs/cm_fx6_defconfig | 2 ++
drivers/usb/Kconfig | 27
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
Unknown command '' - try 'help'.
Use the default
There is no need to use multiple lines when they fit into a single line.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git
Add board_mmc_getwp() for reading the ESDHC write-protect pin.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 19 +++
1 file changed, 19 insertions(+)
diff --git
Declare 'static' when possible.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2: None
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
Perfoming an OR operation on the error is not a good approach.
Return the error immediately for each ESDHC instance instead.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3: None
Changes in v2:
- use ARRAY_SIZE(usdhc_cfg) (Marek)
On Thursday, July 23, 2015 at 01:02:46 PM, Stefan Roese wrote:
This patch enables the USB EHCI support for the Marvell Armada XP (AXP)
SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure
the USB PLL and the USB PHY's specifically in U-Boot. The A38x has done
this already in
On Thursday 23 July 2015 07:08 PM, Ivan Khoronzhuk wrote:
On 23.07.15 15:43, Mugunthan V N wrote:
On Thursday 23 July 2015 04:46 PM, Ivan Khoronzhuk wrote:
Hi, Mugunthan
You are right, phy mode is a board property.
But just for clarifying, does Ethernet SS, which contains SGMII
on
2015-07-13 10:35 GMT+09:00 Masahiro Yamada yamada.masah...@socionext.com:
For the record, describe exactly which device of which vendor
is used on this board.
I2C EEPROM is bound by the generic compatible string, i2c-eeprom,
so this commit has no impact on the functionality.
Signed-off-by:
On Thursday, July 23, 2015 at 04:19:35 PM, Nikita Kiryanov wrote:
Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb
config to defconfig.
Cc: Masahiro Yamada yamada.masah...@socionext.com
Cc: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
Cc: Igor
1 - 100 of 191 matches
Mail list logo